FEM Analysis to Optimally Design End Mill cutters for Milling of Ti-6Al-4V

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering the cutting edge on a cutting tool as the curve of an intersection over a spherical/flat surface based on the model developed by Lee & Altinas [1]. Considering the lowest tool forces the cutting tool parameters are taken and optimal design of end mill is decided for different sizes. Then the 3D CAD models of the end mills are developed and used for Finite Element Method to verify the cutting forces for milling Ti-6Al-4 V. The cutting tool forces, stress, strain concentration (s), tool wear, and temperature of the cutting tool with the different geometric shapes are simulated considering Ti-6Al-4 V as work piece material. Finally, the simulated and theoretical values are compared and the optimal design of cutting tool for different sizes are validated. The present approach considers to improve the quality of machining surface and tool life with effects of the various parameters concerning the oblique cutting process namely axial, radial and tangential forces. Various simulated test cases are presented to highlight the approach on optimally designing end mill cutters.

Finite element analysis of hot rolling in the blooming mill

During this thesis work a coupled thermo-mechanical finite element model (FEM) was builtto simulate hot rolling in the blooming mill at Sandvik Materials Technology (SMT) inSandviken. The blooming mill is the first in a long line of processes that continuously or ingotcast ingots are subjected to before becoming finished products. The aim of this thesis work was twofold. The first was to create a parameterized finiteelement (FE) model of the blooming mill. The commercial FE software package MSCMarc/Mentat was used to create this model and the programing language Python was used toparameterize it. Second, two different pass schedules (A and B) were studied and comparedusing the model. The two pass series were evaluated with focus on their ability to healcentreline porosity, i.e. to close voids in the centre of the ingot. This evaluation was made by studying the hydrostatic stress (σm), the von Mises stress (σeq)and the plastic strain (εp) in the centre of the ingot. From these parameters the stress triaxiality(Tx) and the hydrostatic integration parameter (Gm) were calculated for each pass in bothseries using two different transportation times (30 and 150 s) from the furnace. The relationbetween Gm and an analytical parameter (Δ) was also studied. This parameter is the ratiobetween the mean height of the ingot and the contact length between the rolls and the ingot,which is useful as a rule of thumb to determine the homogeneity or penetration of strain for aspecific pass. The pass series designed with fewer passes (B), many with greater reduction, was shown toachieve better void closure theoretically. It was also shown that a temperature gradient, whichis the result of a longer holding time between the furnace and the blooming mill leads toimproved void closure.

Bioarchaeology of Two Mill Creek Sites from Northwest Iowa: 13PM248 and 13WD402, Research Papers of Office of the State Archaeologist, September 9, 2016 Vol. 41, no. 2

This is a report of a human skeletal remains and artifacts that were excavated from a burial sites in Iowa. The report was written and published by the Office of the State Archaeologist, The University of Iowa, Iowa City

Life cycle assessment of advanced bioethanol production from pulp and paper sludge

This work evaluates the environmental performance of using pulp and paper sludge as feedstock for the production of second generation ethanol. An ethanol plant for converting 5400 tons of dry sludge/year was modelled and evaluated using a cradle-to-gate life cycle assessment approach. The sludge is a burden for pulp and paper mills that is mainly disposed in landfilling. The studied system allows for the valorisation of the waste, which due to its high polysaccharide content is a valuable feedstock for bioethanol production. Eleven impact categories were analysed and the results showed that enzymatic hydrolysis and neutralisation of the CaCO3 are the environmental hotspots of the system contributing up to 85% to the overall impacts. Two optimisation scenarios were evaluated: (1) using a reduced HCl amount in the neutralisation stage and (2) co-fermentation of xylose and glucose, for maximal ethanol yield. Both scenarios displayed significant environmental impact improvements.

Cryopreservation of avocado (Persea Americana Mill.) using somatic embryos

Avocado genetic resources are currently maintained in the form of field repositories at great cost and risk of natural disasters, pest and diseases. Cryopreservation offers a necessary, complimentary method that is safe, cost-effective and long-term. However, long-term maintenance and regeneration of plantlets from avocado somatic embryos has been a major barrier in the development of new avocado cultivars. In this study, two protocols for vitrification-based cryopreservation of avocado somatic embryos were investigated. Globular somatic embryos of two avocado cultivars were tested, revealing cultivar-dependent differences in desiccation tolerance and subsequent freezing resistance, possibly attributed to their size and culture age. A two-step regeneration system, involving an intermediate liquid phase step between subcultures in solid medium, significantly enhanced shoot development from somatic embryo tissue. This work will add considerable value towards cryopreservation of avocado somatic embryos for germplasm conservation and the generation of new and improved avocado cultivars.

Titanium dioxide based nanomaterials for photocatalytic water treatment

Water treatment using photocatalysis has gained extensive attention in recent years. Photocatalysis is promising technology from green chemistry point of view. The most widely studied and used photocatalyst for decomposition of pollutants in water under ultraviolet irradiation is TiO2 because it is not toxic, relatively cheap and highly active in various reactions. Within this thesis unmodified and modified TiO2 materials (powders and thin films) were prepared. Physico-chemical properties of photocatalytic materials were characterized with UV-visible spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometry (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), ellipsometry, time-of-flight secondary ion mass spectrometry (ToF-SIMS), Raman spectroscopy, goniometry, diffuse reflectance measurements, thermogravimetric analysis (TGA) and nitrogen adsorption/desorption. Photocatalytic activity of prepared samples in aqueous environment was tested using model compounds such as phenol, formic acid and metazachlor. Also purification of real pulp and paper wastewater effluent was studied. Concentration of chosen pollutants was measured with high pressure liquid chromatography (HPLC). Mineralization and oxidation of organic contaminants were monitored with total organic carbon (TOC) and chemical oxygen demand (COD) analysis. Titanium dioxide powders prepared via sol-gel method and doped with dysprosium and praseodymium were photocatalytically active for decomposition of metazachlor. The highest degradation rate of metazachlor was observed when Pr-TiO2 treated at 450ºC (8h) was used. The photocatalytic LED-based treatment of wastewater effluent from plywood mill using commercially available TiO2 was demonstrated to be promising post-treatment method (72% of COD and 60% of TOC was decreased after 60 min of irradiation). The TiO2 coatings prepared by atomic layer deposition technique on aluminium foam were photocatalytically active for degradation of formic and phenol, however suppression of activity was observed. Photocatalytic activity of TiO2/SiO2 films doped with gold bipyramid-like nanoparticles was about two times higher than reference, which was not the case when gold nanospheres were used.

Modificação da pasta kraft de eucalipto para novas aplicações

Este trabalho constou num estudo da modificação da pasta kraft de eucalipto, utilizando uma técnica de processamento por alta pressão hidrostática com o intuito de melhorar a sua performance para novas aplicações tal como o papel tissue ou o papel para embalagens. Para tal pretendia-se melhorar algumas propriedades da pasta com a utilização da técnica de alta pressão hidrostática. Realizou-se um estudo preliminar onde se submeteu uma pasta branqueada A, não refinada, a um tratamento hiperbárico (TH) numa gama de pressões de 5000-8000 bar. Para uma pressão de 6000 bar constatou-se uma melhoria de cerca de 16 % no alongamento percentual na rotura, 17 % na resistência à tração, 27 % no índice de rebentamento e cerca de 19 % no índice de rasgamento. Posteriormente, e tendo em conta os resultados positivos verificados na pasta A, estudou-se o efeito do TH numa pasta branqueada B variando a consistência de tratamento (1,5% ou 3%) e o tempo de processamento (5 ou 10 minutos). Foi estudado também o efeito do TH quando aplicado antes e após a refinação da pasta. A pasta branca foi submetida à refinação num moinho PFI entre 1000 e 3000 rotações. Os resultados obtidos mostram que o TH realizado a menores consistências apresenta um efeito mais significativo nas propriedades físico-mecânicas de pastas e que o efeito é distinto quando o processamento é aplicado antes e depois da refinação, tendo-se registado melhoramentos das propriedades mecânicas apenas quando o TH ocorre após a refinação. A pasta kraft foi também modificada com anidrido alquenil succínico (ASA). A modificação da pasta de celulose com ASA resultou numa diminuição das propriedades mecânicas e para além disso não gerou qualquer alteração na termoplasticidade do material, no entanto registou-se um aumento na resistência à molhabilidade. Concluiu-se que o TH conduz a alterações ao nível de propriedades mecânicas e estruturais da pasta de interesse para a aplicação em papéis tissue no caso da pasta B. Para além disso a modificação da pasta com ASA resultou em alterações de interesse particular para papéis de embalagem.

Enzymatic upgrading of eucalypt paper-grade kraft pulp within dissolving pulp production

Dissolving-grade pulps are commonly used for the production of cellulose derivatives and regenerated cellulose. High cellulose content, low content of non-cellulosic material, high brightness, a uniform molecular weight distribution and high cellulose reactivity are the key features that determine the quality of a dissolving pulp. The first part of this work was an optimization study regarding the application of selected enzymes in different stages of a new purification process recently developed in Novozymes for purifying an eucalypt Kraft pulp into dissolving pulp, as an alternative to the pre-hydrolysis kraft (PHK) process. In addition, a viscosity reduction was achieved by cellulase (endoglucanase) treatment in the beginning of the sequence, while the GH11 and GH10 xylanases contributed to boost the brightness of the final pulp. The second part of the work aimed at exploring different auxiliary enzyme activities together with a key xylanase towards further removal of recalcitrant hemicelluloses from a partially bleached Eucalypt Kraft pulp. The resistant fraction (ca. 6% xylan in pulp) was not hydrolysable by the different combinations of enzymes tested. Production of a dissolving pulp was successful when using a cold caustic extraction (CCE) stage in the end of the sequence O-X-DHCE-X-HCE-D-CCE. The application of enzymes improved process efficiency. The main requirements for the production of a dissolving pulp (suitable for viscose making) were fulfilled: 2,7% residual xylan, 92,4% of brightness, a viscosity within the values of a commercial dissolving pulp and increased reactivity.

Comparative study of bioactive potential of Fueniculum vulgare Mill. and Matricaria recutita L. phenolic rich extracts to functionalize cottage chesse

Synthetic additives used in a wide variety of food products have been associated to some toxic effects. This conducted to an increasing interest of consumers for natural additives, including food preservers [1]. Many aromatic herbs have been used to prepare bioactive extracts with benefits to the consumer's health. Foeniculum vulgare Mill. (fennel) and Matricaria recutita L. (chamomile) are examples of popular herbs rich in phenolic compounds with documented antioxidant and antimicrobial properties [2,3]. The present work confirms the antioxidant (DPPH scavenging activity, reducing power and lipid peroxidation inhibition) and antimicrobial (against bacteria such as Bacillus cereus and Salmonella Typhimurium and fungi such as Aspergillus niger, A. versicolor and PenicilliumfimicuJosum) activities of fennel and chamomile extracts, obtained by decoction. The chemical characterization of the extracts, performed by HPLC-DAD-ESIIMS, revealed the presence of five flavonoids (mainly qercetin-3-0- glucoside) and twelve phenolic acids (mainly 5-0-caffeolyquinic acid) for fennel extract and the presence of nine flavonoids (mainly luteolin-0-glucuronide) and ten phenolic acids (mainly di-caffeoyl-2,7- anhydro-3-deoxy-2-octulopyranosonic acid) for chamomile extract. Due to their high antioxidant and antimicrobial activities, both extracts were then incorporated (at DPPH scavenging activity EC25 value: 0.35 mg/mL and 0.165 mg/mL for fennel and chamomile, respectively) in cottage cheeses (prepared by Queijos Casa Matias Lda) as natural additives with two objectives: to increase the shelf-life of the cottage cheeses and to provide bioactive properties to the final products. The results showed that the use of these natural extracts did not alter significantly the nutritional characteristics of the cottage cheese in comparison with control samples (cottage cheese without extracts), but improved its antioxidant potential (more evident in the samples with chamomile extract). After 14 days of storage, only the control samples showed signs of degradation. Overall, the present study highlights the preservation potential of fennel and chamomile extracts in cottage cheeses, improving also their bioactivity.

Sacrum w drodze. Moskwa-Pietuszki Wieniedikta Jerofiejewa i Pulp Fiction Quentina Taranino w kluczu montażowego czytania

The aim of this monograph is the attempt of reading the poem Moscow-Petushki by Venedikt Erofeev and the film Pulp Fiction by Quentin Tarantino using the comparative approach, in which we go beyond the range of factual relationships, historical influences or similarities functioning in the structure of the presented world. The purpose of the book is to see both works of art from the angle of the montage theory of Sergei Eisenstein – the outstanding and highly regarded Russian director and film philosopher – which means studying cultural phenomena in their mutual intertextual relationships. The book focuses on the interpretation of the selected Tarantino’s and Erofeev’s texts of culture, in which the subject of the city, the search for the concept of the body at the end of 20th century and the problem of addictions constitute the dominant thematic issues. The monograph also offers the insight into the nature of the phenomenon of postmodernism and treats Eisenstein’s philosophy as the specific type of anticipation of postmodern tendencies in cinematography.

Foeniculum vulgare Mill. as a natural ingredient to improve cottage cheese antioxidant properties

Food industry is focused on the development of novel functional foods containing health promoting natural ingredients. Natural antioxidants present important health benefits like the prevention of several diseases related to oxidative stress [1,2]. Foeniculum vulgare Mill. (fennel) is a source of those compounds with proved antioxidant potential [3]. Herein, after evaluation of 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity and reducing power of fennel (provided by Américo Duarte Paixão Lda.) decoction, we propose its incorporation into cottage cheese (produced by Queijos Casa Matias Lda.). Three groups of cottage cheese samples were prepared: control; samples with fennel decoction (incorporated at EC25 value=0.35 mg/mL, previously determined by DPPH assay); and samples with fennel powder (incorporated at 1.75 mg/mL, considering the decoction yield=20%). The samples were submitted to an evaluation of DPPH scavenging activity and reducing power immediately after the incorporations, and after 7 and 14 days of storage, at 4 ºC. The incorporation of fennel improved the antioxidant activity of cottage cheese. Samples incorporated with plant powder revealed higher antioxidant properties than samples incorporated with decoction, either in 0 or 7 days of storage. After 14 days, cottage cheese incorporated with fennel decoction gave the highest DPPH scavenging activity (46.72±0.09 mg/mL). A decrease in the antioxidant potential of the cottage cheese with fennel was observed along the shelf life. Nevertheless, it is important to highlight that the samples still display antioxidant properties. Studies regarding the effects of the incorporation of these natural ingredients on nutritional and chemical composition of cottage cheese are in course

[Cadastral survey map of a land tract fronting Tennallytown Road north of Pierce's Mill Road, Tenleytown, Washington D.C.] /

In lead pencil: Aug. 91.

Genetic diversity assessment of the almond (Prunus dulcis (Mill.) DA Webb) traditional germplasm of Algarve, Portugal, using molecular markers

In this study, 123 almond (Prunus dulcis (Mill.) D. A. Webb) trees identified among traditional orchards in the Algarve region and 53 trees of the local field collection managed by the regional office of the Portuguese Ministry of Agriculture (DRAALG) were assessed using isozyme, inter- single sequence repeat and simple sequence repeat or microsatellite techniques for the evaluation of genetic diversity and genetic relatedness and identification of new accessions for the field collection. The isozyme analysis allowed the distribution of the 176 plants into 13 different classes of enzyme similarity, while the use of DNA markers increased the distribution of the analysed trees among 140 discriminating DNA patterns. Multiple cases of homonymy and synonymy were identified in the local germplasm. Some traditional varieties, such as Lourencinha, appeared to be relatively homogeneous, while other local denominations, e.g. Galamba, included diverse genotypes. Of the 13 commercial varieties analysed in this study, 11 assembled in one major cluster clearly differentiated from the majority of the local genotypes. These results reinforced the perception that the Algarve traditional germplasm constitutes an important repository of genetic diversity, eventually carrying alleles of high agricultural interest such as the recently identified Phomopsis resistance in the traditional variety Barrinho Grado.

Expresión génica diferencial y antioxidantes en la planta de tomate (Solanum lycopersicon L. Mill) enriquecida con selenio

La biofortificación tiene como finalidad incrementar la concentración de elementos biodisponibles en las plantas de cultivo para elevar la calidad nutricional. El selenio es un elemento traza de gran impacto para el metabolismo antioxidante de las plantas y su acumulación es pobre en especies como el tomate, de igual manera este elemento es esencial para los humanos, por lo que adicionarlo en las plantas forma parte de los programas de biofortificación. El propósito de este trabajo fue analizar experimentalmente la capacidad del selenito de sodio para incrementar la concentración de Se y modificar la actividad antioxidante en plantas de tomate. Para ello se usaron plantas de la variedad híbrido Toro y se aplicaron tres tratamientos 0, 2 y 5 mg L-1 de selenito de sodio (Na2SeO3) utilizando como vehículo el agua de riego, los tratamientos fueron aplicados bajo un diseño experimental completamente al azar. Se llevaron a cabo tres muestreos 40, 80 y 120 días después del trasplante y la subsecuente cuantificación de la acumulación de selenio y macronutrientes en hojas, tallos y frutos así como su impacto en la producción de frutos bajo un diseño experimental completamente al azar. Se determinó la altura de la planta, los diámetros de tallos, firmeza, sólidos solubles de frutos y la materia seca total de los diferentes tejidos. Se obtuvo una cuantificación del potencial oxido reducción y de la actividad de antioxidante específicos como la catalasa, glutatión peroxidasa, superóxido dismutasa, el ácido ascórbico y licopeno, para cada variable se llevó a cabo un análisis de varianza y posteriormente una prueba de comparación de medias de Tukey. La expresión de los genes cat, gpx, sod, apx y lic en los frutos fue también analizada y en este caso se aplicó un análisis de varianza no paramétrico de Fisher, para encontrar las diferencias entre tratamientos. Los resultados mostraron un incremento en la acumulación de Se, encontrándose hasta un 53.1% de aumento en la concentración en los frutos bajo el tratamiento 5 mg L-1 en comparación con el testigo, sin embargo, este incremento no tuvo un impacto notorio en la producción y el rendimiento del tomate, a pesar de la existencia de una correlación de Spearman positiva (r =0.9637) entre la producción de fruto y la concentración de Se. Los valores del potencial oxido-reducción se redujeron en promedio desde -41.4 mV para el tratamiento testigo y hasta -68.0 mV con el mayor tratamiento. Mientras tanto, la concentración de Se si influyó positivamente en los parámetros de calidad incluyendo el ácido ascórbico (hasta un 50 % de aumento con el tratamiento 5 mgL-1 ) y el licopeno (hasta un 66.9% de aumento con el mayor tratamiento). La actividad de las enzimas antioxidantes aumentó notablemente en el fruto con el tratamiento 5 mg L-1 de selenito encontrándose 60.9% de aumento para CAT, 33.4% para GPX y 26.0% para SOD. En cuanto la expresión génica hubo mayor nivel de transcriptos de los genes gpx, sod y apx bajo el tratamiento 2 mg L-1