Enhancing the Efficiency of Slit-Coupling to Surface-Plasmon Polariton via Dispersion Engineering

We describe a simple method for enhancing the efficiency of coupling from a free-space transverse-magnetic (TM) plane-wave mode into a surface-plasmon-polariton (SPP) mode. The coupling structure consists a metal film with a dielectric-filled slit and a planar, dielectric layer on the slit-exit side of the metal film. By varying the dielectric layer thickness, the wavevector of the SPP mode on the metal surface can be tuned to match the wavevector magnitude of the modes emanating from the slit exit, enabling high-efficiency radiation coupling into the SPP mode at the slit exit. An optimal dielectric layer thickness of approximately 100 nm yields a visible-frequency SPP coupling efficiency approximately 4 times greater than the SPP coupling efficiency without the dielectric layer. Commensurate coupling enhancement is observed spanning the free-space wavelength range 400 nm < or = lambda(0) < or = 700 nm. We map the dependence of the SPP coupling efficiency on the slit width, the dielectric-layer thickness, and the incident wavelength to fully characterize this SPP coupling methodology

Evolution of slow electrostatic shock into a plasma shock mediated by electrostatic turbulence

The collision of two plasma clouds at a speed that exceeds the ion acoustic speed can result in the formation of shocks. This phenomenon is observed not only in astrophysical scenarios, such as the propagation of supernova remnant (SNR) blast shells into the interstellar medium, but also in laboratory-based laser-plasma experiments. These experiments and supporting simulations are thus seen as an attractive platform for small-scale reproduction and study of astrophysical shocks in the laboratory. We model two plasma clouds, which consist of electrons and ions, with a 2D particle-in-cell simulation. The ion temperatures of both clouds differ by a factor of ten. Both clouds collide at a speed that is realistic for laboratory studies and for SNR shocks in their late evolution phase, like that of RCW86. A magnetic field, which is orthogonal to the simulation plane, has a strength that is comparable to that of SNR shocks. A forward shock forms between the overlap layer of both plasma clouds and the cloud with cooler ions. A large-amplitude ion acoustic wave is observed between the overlap layer and the cloud with hotter ions. It does not steepen into a reverse shock because its speed is below the ion acoustic speed. A gradient of the magnetic field amplitude builds up close to the forward shock as it compresses the magnetic field. This gradient gives rise to an electron drift that is fast enough to trigger an instability. Electrostatic ion acoustic wave turbulence develops ahead of the shock, widens its transition layer, and thermalizes the ions, but the forward shock remains intact. © 2014 IOP Publishing Ltd and Deutsche Physikalische Gesellschaft.

A Spherical Array Approach for Simulation of Binaural Impulse Responses using the Finite Difference Time Domain Method

The finite difference time domain (FDTD) method has direct applications in musical instrument modeling, simulation of environmental acoustics, room acoustics and sound reproduction paradigms, all of which benefit from auralization. However, rendering binaural impulse responses from simulated
data is not straightforward to accomplish as the calculated pressure at FDTD grid nodes does not contain any directional information. This paper addresses this issue by introducing a spherical array to capture sound pressure on a finite difference grid, and decomposing it into a plane-wave density
function. Binaural impulse responses are then constructed in the spherical harmonics domain by combining the decomposed grid data with free field head-related transfer functions. The effects of designing a spherical array in a Cartesian grid are studied, and emphasis is given to the relationships
between array sampling and the spatial and spectral design parameters of several finite-difference
schemes.

Kinetostatic-model-based Stiffness Analysis of Exechon PKM

As a comparative newly-invented PKM with over-constraints in kinematic chains, the Exechon has attracted extensive attention from the research society. Different from the well-recognized kinematics analysis, the research on the stiffness characteristics of the Exechon still remains as a challenge due to the structural complexity. In order to achieve a thorough understanding of the stiffness characteristics of the Exechon PKM, this paper proposed an analytical kinetostatic model by using the substructure synthesis technique. The whole PKM system is decomposed into a moving platform subsystem, three limb subsystems and a fixed base subsystem, which are connected to each other sequentially through corresponding joints. Each limb body is modeled as a spatial beam with a uniform cross-section constrained by two sets of lumped springs. The equilibrium equation of each individual limb assemblage is derived through finite element formulation and combined with that of the moving platform derived with Newtonian method to construct the governing kinetostatic equations of the system after introducing the deformation compatibility conditions between the moving platform and the limbs. By extracting the 6 x 6 block matrix from the inversion of the governing compliance matrix, the stiffness of the moving platform is formulated. The computation for the stiffness of the Exechon PKM at a typical configuration as well as throughout the workspace is carried out in a quick manner with a piece-by-piece partition algorithm. The numerical simulations reveal a strong position-dependency of the PKM's stiffness in that it is symmetric relative to a work plane due to structural features. At the last stage, the effects of some design variables such as structural, dimensional and stiffness parameters on system rigidity are investigated with the purpose of providing useful information for the structural optimization and performance enhancement of the Exechon PKM. It is worthy mentioning that the proposed methodology of stiffness modeling in this paper can also be applied to other overconstrained PKMs and can evaluate the global rigidity over workplace efficiently with minor revisions.

Influence of strain and polycrystalline ordering on magnetic properties of high moment rare earth metals and alloys

Despite being the most suitable candidates for solenoid pole pieces in state-of-the-art superconductor- based electromagnets, the intrinsic magnetic properties of heavy rare earth metals and their alloys have gained comparatively little attention. With the potential of integration in micro- and nanoscale devices, thin films of Gd, Dy, Tb, DyGd and DyTb were plasma-sputtered and investigated for their in-plane magnetic properties, with an emphasis on magnetisation vs. temperature profiles. Based on crystal structure analysis of the polycrystalline rare earth films, which consist of a low magnetic moment FCC layer at the seed interface topped with a higher moment HCP layer, an experimental protocol is introduced which allows the direct magnetic analysis of the individual layers. In line with the general trend of heavy lanthanides, the saturation magnetisation was found to drop with increasing unit cell size. In-situ annealed rare earth films exceeded the saturation magnetisation of a high-moment Fe65Co35 reference film in the cryogenic temperature regime, proving their potential for pole piece applications; however as-deposited rare earth films were found completely unsuitable. In agreement with theoretical predictions, sufficiently strained crystal phases of Tb and Dy did not exhibit an incommensurate magnetic order, unlike their single-crystal counterparts which have a helical phase. DyGd and DyTb alloys followed the trends of the elemental rare earth metals in terms of crystal structure and magnetic properties. Inter-rare-earth alloys hence present a desirable blend of saturation magnetisation and operating temperature.

Macroprudential Ideas and Contested Social Purpose: A Response to Terrence Casey

In response to Terrence Casey's argument that the emergence of macroprudential regulation since the financial crash can and should save neoliberalism we raise five objections. 1). The Debt-Driven Growth Hypothesis (DDG) and the Financial Instability Hypothesis (FIH), as Casey terms them, are just as likely to be complementary as they are oppositional and they are by no means incompatible. 2) Casey's empirics are too thin and static, drawn from the 1980s and 1990s, while Anglo Liberal Financialised Capitalism (ALFC) is a complex adaptive system that has continued to evolve throughout the 2000s. 3) Casey overlooks the dynamic relationship between potentially excessive financialisation and the performance of the wider economy, which is becoming a growing concern for many policy makers using the macroprudential frame. 4) Macroprudential as a series of ideas about the economy are often incompatible with neoliberal premises and their ontological foundations. 5) Many of the policy makers who have acted as the biggest champions of macroprudential regulation have also been highly critical of ALFC and view the macroprudential turn as making a contribution to a much needed deeper financial reformation that would over time transform some of the constituent economic and social relations of the existing political economy. We conclude that what we call the social purpose of macroprudential regulation (the question of whether it is intended to patch up or transform the existing system) is contested, and that macroprudential regulation has much potential beyond saving ‘neoliberalism’.

Varieties of Economic Crisis, Varieties of Ideational Change: How and Why Macroeconomic Policy and Financial Regulation Differ

One of the principal tasks facing post-crash academic political economy is to analyse patterns of ideational change and the conditions that produce such change. What has been missing from the existing literature on ideational change at times of crises however, is a sense of how processes of persuasive struggle, and how the success of those ‘norm entrepreneurs’ arguing for ideational change is shaped by two contextual variables: the most immediate material symptoms and problems that a crisis displays (the variety of crisis); and the institutional character of the policy subsystem that agents have to operate within to affect change. Introducing these two variables into our accounts of persuasive struggle and ideational change enables us to deepen our understanding of the dynamics of ideational change at times of crisis. The article identifies that a quite rapid and radical intellectual change has been evident in the field of financial regulation in the form of an embrace of a macroprudential frame. In contrast in the field of macroeconomic policy - both monetary and fiscal policy, many pre-crash beliefs remain prominent, there is evidence of ideational stickiness and inertia, and despite some policy experimentation, overarching policy frameworks and their rationales have not been overhauled. The article applies Peter Hall’s framework of three orders of policy changes to help illuminate and explain the variation in patterns of change in the fields of financial regulation and macroeconomic policy since the financial crash of 2008. The different patterns of ideational change in macroeconomic policy and financial regulation in the post-crash period can be explained by timing and variety of crisis; sequencing of policy change; and institutional political differences between micro policy sub systems and macro policy systems.

Seismic Assessment of a Steel Braced Plan Mass Symmetric/Asymmetric Building Structure

This paper presents a seismic response investigation into a code designed concentrically braced frame structure that is subjected to but not designed for in-plan mass eccentricity. The structure has an accidental uneven distribution of mass in plan resulting in an increased torsional component of vibration. The level of inelasticity that key structural elements in plan mass asymmetric structures are subjected to is important when analysing their ability to sustain uneven seismic demands. In-plan mass asymmetry of moment resisting frame and shear wall type structures have received significant investigation, however, the plan asymmetric response of braced frame type structures is less well understood. A three-dimensional non-linear time history analysis (NLTHA) model is created to capture the torsional response of the plan mass asymmetric structure to quantify the additional ductility demand, interstorey drifts and floor rotations. Results show that the plan mass asymmetric structure performs well in terms of ductility demand, but poorly in terms of interstorey drifts and floor rotations when compared to the plan mass symmetric structure. New linear relationships are developed between the normalised ductility demand and normalised slenderness of the bracing on the sides of the plan mass symmetric/asymmetric structures that the mass is distributed towards and away from.

Ferromagnetism in DyRh and DyRhX (X = Fe, Ni, Co, Gd) thin films

In an effort to achieve large high-field magnetization and increased Curie temperature, polycrystalline DyRh, (DyRh)95X5 and (DyRh)85X15 (X = Fe, Co, Ni, Gd) thin films have been prepared via ultra-high vacuum DC co-sputtering on SiO2 and Si wafers, using Ta as seed and cap material. A body-centred cubic CsCl-like crystal formation (B2 phase) was achieved for DyRh around the equiatomic equilibrium, known from single crystals. The maximum in-plane spontaneous magnetization at T = 4K in fields of μ0H = 5T of was found to be μ0MS,4K = (1.50 ± 0.09)T with a ferromagnetic transition at TC = (5 ± 1)K and a coercivity of μ0HC,4K[D] = (0.010 ± 0.001)T (at T = 4K) for layers deposited on substrates heated to 350°C. Samples prepared at room temperature exhibited poorer texture, smaller grains and less B2-phase content; this did impact on the Curie temperature which was higher compared to those layers with best crystallisation; however the maximal magnetization stayed unaffected. Ferromagnetic coupling was observed in ternary alloys of DyRhGd and DyRhNi with an increased Curie temperature, larger initial permeability, and
high-field magnetization which was best for (DyRh)85Gd15 with μ0MS,4K[Gd15] = (2.10 ± 0.13)T. DyRhFe and DyRhCo showed antiparallel coupling of the spontaneous magnetic moments.

Progressive deformation of glacial till due to viscoplastic straining and pore pressure variation

The stress regime in a cutting (slope) is complex, with different principle stresses acting in different directions along the potential failure plane. For example, stresses may be primarily in extension near the toe and in compression near the crest of a slope. Cuttings in heavily overconsolidated clays are known to be susceptible to progressive failure which usually starts at the toe of the slope. Softening and the development of rupture surfaces have been observed in the field and are well documented for London Clays. However, this failure mechanism is yet to be established for glacial tills. To better understand the progressive failure mechanism, this paper discusses a series of laboratory tests conducted on reconstituted glacial till samples from Northern Ireland. Initial observations indicate that, a soil with insitu stress states between 80-90% of peak strength may undergo significant viscoplastic straining as a result of the combination of pore-pressure cycling and elevated stress level.

Direction-contingent duration compression is primarily retinotopic

Previous research has shown that prior adaptation to a spatially circumscribed, oscillating grating results in the duration of a subsequent stimulus briefly presented within the adapted region being underestimated. There is an on-going debate about where in the motion processing pathway the adaptation underlying this distortion of sub-second duration perception occurs. One position is that the LGN and, perhaps, early cortical processing areas are likely sites for the adaptation; an alternative suggestion is that visual area MT+ contains the neural mechanisms for sub-second timing; and a third position proposes that the effect is driven by adaptation at multiple levels of the motion processing pathway. A related issue is in what frame of reference – retinotopic or spatiotopic – does adaptation induced duration distortion occur. We addressed these questions by having participants adapt to a unidirectional random dot kinematogram (RDK), and then measuring perceived duration of a 600 ms test RDK positioned in either the same retinotopic or the same spatiotopic location as the adaptor. We found that, when it did occur, duration distortion of the test stimulus was direction contingent; that is it occurred when the adaptor and test stimuli drifted in the same direction, but not when they drifted in opposite directions. Furthermore the duration compression was evident primarily under retinotopic viewing conditions, with little evidence of duration distortion under spatiotopic viewing conditions. Our results support previous research implicating cortical mechanisms in the duration encoding of sub-second visual events, and reveal that these mechanisms encode duration within a retinotopic frame of reference.

Challenging the SD benefits attributed to sport Mega-Events hosting

Sport Mega-event hosting faces opposition that is manifested with different intensity during the different phases of the event, from its inception as an idea to its delivery and legacy. Some Social Movements Organisations (SMOs) have acted as indefatigable monitors of the Sustainable Development (SD) dimension of sporting events in general and, in some of the most recent sport mega-events, in particular the Olympics, they have served as important advisors and facilitators. Nevertheless, in many cases we see enthusiastic supporters turning to vehemently challenging whatever positives have been associated with hosting the event. In addition, there is opposition to sport Mega-events in their entirety. That type of opposition tends to employ a holistic prism that manages to identify multiple interconnected negative aspects of hosting a sport mega-event and incorporate them into an anti-systemic discourse. It is important to bear in mind that irrespective of many proclamations to the opposite as far as megas are concerned (projects and/or events), a number of studies have demonstrated that citizen participation and democratic accountability in decision-making have been notoriously absent. After all, the idea of citizen participation in the planning of sport mega-event is essentially the public response to a plan conceived by others. There were, of course, some notable cases of democratic consultation at the early stages of bidding to host a sport mega-event but these more democratic approaches resulted in the failure of the bid (for e.g. Toronto 1996). The knowledge of this by the groups that initiated the hosting idea and the bidding process has led to discouraging in depth public consultation that may fit perfectly to the democratic process but not to the tight schedules of associated projects completion. That produces ‘autocracy against which opposition may arise’ (Hiller, 2000, p. 198). It is this democratic deficit that has led to important instances of social contestation and protest mobilizations by citizen groups as well as the more regular corps of social activists. From a perspective borrowed from the sociology of protest and social movements, sport mega-events hosting can operate as an issue that stimulates protest activities by an existing protest milieu and new actors as well as an important mobilizing resource. In fact, some scholars have also argued that the Olympic Games were an important frame for the transnational activism that was marked by anti-globalization protest in Seattle in 1999 (Cottrell & Nelson, 201; Lenskyj, 2008). In addition, it’s important not to lose sight of other acts dissent that take place in relatively close proximity, about a year before the event when most infrastructural and societal changes brought by hosting the event and impact start to become apparent by the host communities, like the rioting of August 2011 in the London Olympic Boroughs and the 2012 riots of June 2013 in Sao Paulo and other Brazilian cities. This paper starts by outlining the SD claims made in the bidding to host the summer Olympic Games by five prospective hosts (Sydney; Athens; Beijing; London and Rio) proceeds towards examining the opposition and challenges that was manifested in relation to these claims. In Particular it provides an assessment of protest-events over the aforementioned different phases of sport mega-events hosting. A different picture emerges for each of the host nation that is partly explained by local, national and global configuration of protest politics. Whereas the post-event legacy of the first two hosts of the Games can be assessed and that way see the validity of claims made by challengers in the other phases, in the other three cases, the implementation of Olympic Games Impact (OGI) studies offers the tool for discussing the post-event phase for Beijing and London and engage in a speculative exercise for the case of Rio. Judging by available findings, the paper concludes that the SD aspiration made in the bid documents are unlikely to be met and social contestation based on the same issues is likely to increase due to the current global economic crisis and BRICS, like China and Brazil, having entered the process of becoming global economic hegemons.

Periodic Arrays of Interwoven Quadrifilar Spirals on Ferrite Substrates

The properties of metasurfaces composed of doubly periodic arrays of interwoven quadrifilar spiral conductors on magnetized ferrite substrates have been investigated with the aid of the full-wave electromagnetic simulator. The effects of incident wave polarization and ferrite magnetization on the scattering characteristics have been analysed at both normal and in-plane dc magnetic bias. The features of the fundamental topological resonances in the interwoven spiral arrays on ferrite substrates are illustrated by the simulation results and the effects of ferrite gyrotropy and dispersion on the array resonance response and fractional bandwidth are discussed.

Nanosecond imaging of shock-and jet-like features

The production of shock- and collimated jet-like features is recorded from the self-emission of a plasma using a 16- frame camera, which can show the progression of the interaction over short (100s ns) durations. A cluster of laser beams, with intensity 10¹⁵ W/cm², was focused onto a planar aluminum foil to produce a plasma that expanded into 0.7 mbar of argon gas. The acquisition of 16 ultrafast images on a single shot allows prompt spatial and temporal characterization of the plasma and enables the velocity of the jet- and shock-like features to be calculated.

Gender Equality Acts - Federal and States (Germany):a practical commentary

This book provides a systematic introduction in the German gender equality acts for public services, and also a section per section commentary for each individual act. It analyses the legal base, limits and scope of the so called women's quota, gender mainstreaming in public employment and public policy, provisions to allow conciliation of paid work and work in families and the position of women's equality officers. It compares and analyses 16 state acts and the federal equality act. The introductory chapter, written by Dagmar Schiek, also provides an analysis of the EU level and constitutional frame for this legislation. The combination of a systematic introduction and a section by section commentary ensures that this valuable handbook can be used by trained lawyers as well as by social scientists, taking into account the fact that many equality officers are not trained lawyers.