Generic drug prices and policy in Australia: room for improvement? A comparative analysis with England

To assess the degree to which reimbursement prices in Australia and England differ for a range of generic drugs, and to analyse the supply- and demand-side factors that may contribute to these differences.

Kinetics of γ-Mg17Al12 phase dissolution and its effect on room temperature tensile properties in as-cast AZ80 magnesium alloy

As-cast AZ80 magnesium alloy consists of α-Mg, eutectic product of α-Mg and γ-Mg17Al12, with the latter present in the form of partially and fully divorce eutectic. There occurs dissolution of harder γ-Mg17Al12 phase during homogenization treatment at 400 ° and 439 °C. The proportion of the α-Mg and γ-Mg17Al12 phase was varied by solutionizing the alloy for various lengths of time at these temperatures, in order to investigate the kinetics of phase transformation and to evaluate the effect of phase proportion, size and morphology on room temperature tensile properties. It was found that the yield strength decreases with the increase in solutionizing temperature from 400° to 439 °C and at the same time, ductility in general increases with the increasing solutionizing temperature. The variation in tensile properties and the nature of fractographs were analyzed in terms of the effects of microstructure. © (2014) Trans Tech Publications, Switzerland.

Making intellectual room for persona studies: a new consciousness and a shifted perspective

It is an enormously difficult—and perhaps impossible, but ultimately important—task to comprehensively define the contemporary moment through a particular concept. This introduction and this journal make the claim that both in a pervasive way and to a pandemic extent, there is enormous activity and energy in the production, construction, and exhibition of personas. Something quite extraordinary has shifted over the last twenty years that has led to this intensive focus on constructing strategic masks of identity. The catalyst is the development of online culture and its invocation to personalize the expression of a public self—essentially a persona—regularly and incessantly. This culture of producing and monitoring our public selves is the focus of this journal as online culture blends with everyday culture and leads to an insistent proliferation of personas for both presentation and for strategic purposes in order to manage very new notions of value and reputation. The task of investigating persona is complex, and is dependent on connections and intersections across an array of disciplines. This journal and the field of Persona Studies is designed to serve as a site for this essential work of comprehending, analysing, and critiquing persona, and to allow disciplines to intersect, exchange ideas, and debate the play of persona historically and in contemporary culture.

Forming behaviour analysis and constitutive modelling of Ti-6Al-4V at room temperature.

 A constitutive model was proposed in this thesis and a promising approach for accurate prediction of forming behaviour of high strength titanium alloy sheet metal forming at room temperature is presented. Outcomes showed a potential solution of cold roll forming of this material for aerospace and automotive structural applications.

Still in the LEGO (LEGOS) room : female teachers designing curriculum around girls’ popular culture for the coeducational classroom in Australia

While the issue of boys’ dominance of the curriculum has a long history, the article examines this phenomenon in a contemporary context, through an empirical study with female teachers designing English curriculum around girls’ media in a coeducational secondary school in Victoria, Australia. In this space, teachers, and the researcher, produce and perform both individual gendered identities and plans for the identities of future student subjects, while negotiating subject positions made available to girls and women in broader social contexts. In this instance, negotiations that take place during the development of a unit of work on Mattel's Barbie website form the basis of feminist discourse analysis, enabling us to ‘take stock’ in thinking about what curriculum design is, about where the past is situated in relation to the present, and to question why, within a discursive feminist/postfeminist entanglement, the heritage of feminist intellectual thought in this area seems absent.

Corporate social responsibility and environmental sustainability: classification of the initiatives of the FMCG companies operating in Brazil

Este trabalho tem como objetivo fornecer uma análise detalhada do cenário da sustentabilidade ambiental e iniciativas de responsabilidade social corporativa nas empresas que operam no mercado de bens de consumo brasileiro. Para alcançar este objetivo as dez maiores empresas do mercado-alvo presente no Brasil foram analisadas por meio da classificação das suas iniciativas em três perspectivas amplas. Com esta classificação o cenário do mercado pode ser visto. As perspectivas utilizadas para a elaboração do trabalho são: (1) iniciativa ambiental ou social; (2) o foco interno ou externo e (3) a marca ou o custo como motivador. Depois de classificar todas as iniciativas, foi possível ver que as empresas similares, que operam em mercados semelhantes, têm estratégias que são muito parecidos entre si. Além disso, ficou claro que a estratégia de negócios da empresa influencia as suas políticas ambientais e sociais, em particular os objetivos que estas políticas procuram obter.Embora este trabalho apresente um panorama abrangente do setor de bens de consumo em relação a políticas de comportamento responsável das empresas, ele tem algumas limitações. A limitação mais significativa diz respeito a metodologia. As iniciativas foram avaliadas pela quantidade e a abrangência dos benefícios do impacto positivo não foram avaliados, impossibilitando assim a comparação do tamanho do impacto de cada empresa. Uma vez que pode haver um projeto de uma empresa que tem maior impacto do que vários outros feitos por alguma outra empresa. A metodologia foi baseada em clusters de categorias, no entanto, as iniciativas não são completamente uma coisa ou outra, ou seja, uma iniciativa pode ter diferentes impactos, drivers ou foco, nesses casos, os aspectos mais relevantes foram a escolhidos para classificá-los.

The sources of spinoff equity gains: takeover premiums or operating gains

Although the existence of spinoff equity gains is well documented, their source remains controversial. Arnong many potential causes, the literature suggests that spinoff equity gains could arise from expected tax benefits, expected takeover premia, operating performance improvement or from refocusing benefits. This paper investigates the link between spinoff announcement and post completion equity gains and post spinoff operating performance changes, takeover activity and refocusing benefits. The results indicate that spinoff announcement retums reflect anticipated takeover premiums as well as expected operating performance gains and refocusing benefits unrelated to operating performance. However, only the parent's operating performance gains are anticipated at the spinoff announcement. We find that post spinoff equity gains are driven mostly by operating performance changes for both parents and spun off subsidiaries. Takeover activity and unrelatedness of business lines between parent and subsidiary expIain littIe of post spinoff equity gains. OveralI, the data suggests that spinoffs equity gains mostly reflect anticipated real economic gains in terms of improved operating performance, and to a lesser extent takeover premium and refocusing benefit.

Hospital hero: a game for reducing stress and anxiety of children while waiting in emergency room

This report tells a story which started as an idea that came to us to fight the battle-cry feeling commonly known as stress and anxiety. Before creating the solution of the idea, we first need to understand the feelings underneath and its effects on our well-being. Throughout the course of our lives, we experience states of weakness and fear. These feelings can arise, for instance, while we are in an emergency room. Needless to say, how much it would have imaginable effects on children, who are unfamiliar to such environments. We ran through a serious of scenarios to find the most suitable solution, among them the study of interaction with positive expressions by Dr. Baldwin, proved to be a valued resource. It was reduced due to its length and to be suitable to our public audience. The game was then created in order to reduce or even eliminate the stress and anxiety of children. Since the game was initially released, some modifications had been made but the original idea - interaction with positive expressions – remained. When the time came, we asked children to play one of the two versions of the game while waiting in the emergency room. This not only created a diversion for them but also a learning experience as it displayed some hospital equipment. The difference between the two versions is that one provides expressions, while the other does not. After all our hard work, we felt rewarded because the project proved its worth and we would see that in the expressions on children’s faces while they played. Most importantly, their anxiety level numbers were significantly reduced during that short period of time.

Caracterização termo-mecânica de interconectores metálicos recobertos com filmes de LaCrO3

The cells unitaria of the solid oxide fuel cell are separated by means of interconnects, which serve as electrical contact between the cells. Lanthanum Chromite (LaCrO3) has been the most common material used as interconnect in solid oxide fuel cells. Reducing the operating temperature around 800 º C of cells to solid oxide fuel make possibilite the use of metallic interconnects as an alternative to ceramic LaCrO3. Metallic interconnects have advantages over ceramic interconnects such as high thermal conductivity, electricity, good ductility, low cost, good physical and mechanical properties. In this work evaluate the thermo-mechanical properties of the metallic substrate and coated metallic substrate with the ceramic LaCrO3 film via spray-pyrolysis, in order to demonstrate the feasibility of using this material as a component of a fuel cell solid oxide. The materials were characterized by X-ray diffraction, oxidation behavior, mechanical strength, optical microscopy (OM) and scanning electron microscopy (SEM). The X-ray diffraction proved the formation phase of the LaCrO3 on the metallic substrate and the identification of the phases formed after the oxidative test and mechanical strength at high temperature. The oxidation behavior showed the increased oxidation resistance of the coated metallic substrate. It was noted that the mechanical resistance to bending of the coated metallic substrate only increases at room temperature. The optical microscopy (OM) has provided an assessment of both the metallic substrate and the LaCrO3 film deposited on the metal substrate that, in comparison with the micrographs obtained from SEM. The SEM one proved the formation of Cr2O3 layer on the metallic substrate and stability of LaCrO3 film after oxidative test, it can also observe the displacement of the ceramic LaCrO3 film after of mechanical testing and mapping of the main elements as chromium, manganese, oxygen, lanthanum in samples after the thermo-mechanical tests.

Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test

Microemulsões aplicadas ao tratamento de Óleos isolantes

Naphthenic lubricating oils are used in transformers with the purpose of promoting electrical insulation and dissipating heat. The working temperature range of these oils typically lies between 60°C and 90°C and their useful life is 40 years in average. In that temperature range, the oils are decomposed during operation, whereby a small fraction of polar compounds are formed. The presence of these compounds may induce failure and loss of physical, chemical and electrical properties of the oil, thus impairing the transformer operation. By removing these contaminants, one allows the oxidized insulating oil to be reused without damaging the equipment. In view of this, an investigation on the use of surfactants and microemulsions as extracting agents, and modified diatomite as adsorbent, has been proprosed in this work aiming to remove polar substances detected in oxidized transformer oils. The extraction was carried out by a simple-contact technique at room temperature. The system under examination was stirred for about 10 minutes, after which it was allowed to settle at 25°C until complete phase separation. In another experimental approach, adsorption equilibrium data were obtained by using a batch system operating at temperatures of 60, 80 and 100°C. Analytical techniques involving determination of the Total Acidity Number (TAN) and infrared spectrophotometry have been employed when monitoring the decomposition and recovery processes of the oils. The acquired results indicated that the microemulsion extraction system comprising Triton® X114 as surfactant proved to be more effective in removing polar compounds, with a decrease in TAN index from 0.19 to 0.01 mg KOH/g, which is consistent with the limits established for new transformer oils (maximal TAN = 0.03 mg KOH/g). In the adsorption studies, the best adsorption capacity values were as high as 0.1606 meq.g/g during conventional adsoprtion procedures using natural bauxite, and as high as 0.016 meq.g/g for the system diatomite/Tensiofix® 8426. Comparatively in this case, a negative effect could be observed on the adsorption phenomenon due to microemulsion impregnation on the surface of the diatomite

Continuous ethanol production in a nonconventional five-stage system operating with yeast cell recycling at elevated temperatures

Three ranges of increasing temperatures (35-43, 37-45, 39-47degreesC) were sequentially applied to a five-stage system continuously operated with cell recycling so that differences of 2degreesC (between one reactor to the next) and 8degreesC (between the first reactor at the highest temperature and the fifth at the lowest temperature) were kept among the reactors for each temperature range. The entire system was fed through the first reactor. The lowest values of biomass and viability were obtained for reactor R-3 located in the middle of the system. The highest yield of biomass was obtained in the effluent when the system was operated at 35-43degreesC. This nonconventional system was set up to simulate the local fluctuations in temperature and nutrient concentrations that occur in different regions of the medium in an industrial bioreactor for fuel ethanol production mainly in tropical climates. Minimized cell death and continuous sugar utilization were observed at temperatures normally considered too high for Saccharomyces cerevisiae fermentations.

A Management Tool for the Replication of Operating Systems in Wireless Communication Networks

To simplify computer management, various administration systems based on wired connections adopt advanced techniques to manage software configuration. Nevertheless, the strong relation between hardware and software makes for an individualism of that management, besides penalizing computational mobility and ubiquity. All these issues lead to degradation of scalability, flexibility and the facility to install and maintain distributed applications. This article presents an environment for centralized wireless communication network management, named WSE-OS (Wireless Sharing Environment - Operating Systems): a model based on Virtual Desktop Infrastructure (VDI) which associates virtualization techniques and safe remote access systems to create a distributed architecture as a base for a managing system. WSE-OS is capable of accomplishing the replication of operating system images using wireless communication network, besides offering abstraction of hardware to its clients, making the management more flexible and independent of wired connections. Results obtained from this work indicate that WSE-OS allows disseminating, through a single software configuration, the execution of data related to operating system images in client computers. WSE-OS can also be used as a management tool for operating systems in a wireless network.

Anelastic spectroscopy in SmBa2Cu3O7

The possibility of variable stoichiometry and the high mobility of oxygen in the CuOx planes of SmBa2Cu3O7 give rise to a rich phase diagram. Measurements of the elastic energy loss and modulus (anelastic spectroscopy) as a function of temperature can distinguish among the different atomic jumps, which occur in the various phases or at different local ordering. In this paper, it is reported anelastic relaxation measurements in SmBa2Cu3O7, above room temperature, using a torsion pendulum operating in frequencies around 40 Hz. The mobility of oxygen atoms in the CuOx planes in the various phases has been discussed and the thermally activated peak of elastic energy dissipation observed around 500 K was interpreted in that framework. (C) 2004 Elsevier B.V. All rights reserved.