Loss of ammonia from nitrogen fertilizers applied to maize and soybean straw

In Brazilian agriculture, urea is the most commonly used nitrogen (N) source, in spite of having the disadvantage of losing considerable amounts of N by ammonia-N volatilization. The objectives of this study were to evaluate: N lossby ammonia volatilization from: [urea coated with copper sulfate and boric acid], [urea coated with zeolite], [urea+ammonium sulfate], [urea coated with copper sulfate and boric acid+ammonium sulfate], [common urea] and [ammonium nitrate]; and the effect of these N source son the maize yield in terms of amount and quality. The treatments were applied to the surface of a soil under no-tillage maize, in two growing seasons. The first season (2009/2010) was after a maize crop (maize straw left on the soil surface) and the second cycle (2012/2011) after a soybean crop. Due to the weather conditions during the experiments, the volatilization of ammonia-N was highest in the first four days after application of the N sources. Of all urea sources, under volatilization-favorable conditions, the loss of ammonia from urea coated with copper sulfate and boric acid was lowest, while under high rainfall, the losses from the different urea sources was similar, i.e., an adequate rainfall was favorablet o reduce volatilization. The ammonia volatilization losses were greatest in the first four days after application. Maize grain yield differed due to N application and in the treatments, but this was only observed with cultivation of maize crop residues in 2009/2010. The combination of ammonium+urea coated with copper sulfate and boric acid optimized grain yield compared to the other urea treatments. The crude protein concentration in maize was not influenced by the technologies of urea coating.

Crop response to organic fertilization with supplementary mineral nitrogen

Animal manure is applied to the soil as a nutrient source, especially of nitrogen, to plants. However, manure application rates can be reduced with the use of N fertilizer in topdressing. The aim of this study was to evaluate crop responses to different application rates of animal manure sources, used alone and supplemented with mineral N topdressing, in a no-tillage system. The study was carried out from 2005 to 2008 on a Hapludalf soil. The treatments consisted of rates of 10, 20 and 30 m³ ha-1 of pig slurry (PS), and of 1 and 2 t ha-1 of turkey manure (TM), applied alone and supplemented with topdressed N fertilizer (TNF), as well as two controls, mineral fertilization (NPK) and one control without fertilizer application. Grain yield in common bean and maize, and dry matter yield and nutrient accumulation in common bean, maize and black oat crops were evaluated. Nitrogen application in topdressing in maize and common bean, especially when PS was used at rates of 20 and 30 m³ ha-1, and TM, at 2 t ha-1, proved effective in increasing the crop grain yields, showing the viability of the combined use of organic and industrialized mineral sources. Nitrogen accumulation in maize and common bean tissues was the indicator most strongly related to grain yield, in contrast with the apparent nutrient recovery, which was not related to the N, P and K quantities applied in the organic sources. No clear residual effect of N topdressing of maize and common bean was observed on the dry matter yield of black oat grown in succession to the main crops with PS and TM applications.

Nitrogen fertilization (15NH4NO3) of palisadegrass and residual effect on subsequent no-tillage corn

Nitrogen is required in large amounts by plants and their dinamics in corn and perennial forages intercropped is little known. This study analyzed the efficiency of nitrogen fertilization (15NH4NO3) applied after corn grain harvest to palisadegrass (Brachiaria brizantha cv. Marandu) in intercrops sown at two times, as well as the N residual effect on the subsequent corn crop. The field experiment was performed in Botucatu, São Paulo State, in southeastern Brazil, on a structured Alfisol under no-tillage. The experiment was arranged in a randomized block design in a split plot scheme with four replications. The main plots consisted of two intercropping systems (corn and palisadegrass sown together and palisadegrass sown later, at corn top-dressing fertilization). The subplots consisted of four N rates (0, 30, 60, and 120 kg ha-1 N). The subplots contained microplots, in which enriched ammonium nitrate (15NH4NO3) was applied at the same rates. The time of intercrop sowing affected forage dry matter production, the amount of fertilizer-derived N in and the N use efficiency by the forage plants. Nitrogen applied in autumn to palisadegrass intercropped with corn, planted either at corn sowing or at N top-dressing fertilization, increased the forage yield up to a rate of 60 kg ha-1. The amount of fertilizer-derived N by the forage plants and the fertilizer use efficiency by palisadegrass were highest 160 days after fertilization for both intercrop sowing times, regardless of N rates. Residual N did not affect the N nutrition of corn plants grown in succession to palisadegrass, but increased grain yield at rates of 60 and 120 kg ha-1 N, when corn was grown on palisadegrass straw from the intercrop installed at corn fertilization (top-dressing). Our results indicated that the earlier intercropping allowed higher forage dry matter production. On the other hand, the later intercrop allowed a higher corn grain yield in succession to N-fertilized palisadegrass.

Biotechnological production of taxanes: a molecular approach

Plant cell cultures constitute a promise for the production of a high number of phytochemicals, although the majority ofbioprocesses that have been developed so far have not resultedcommercially successful. An overview indicates that most of theresearch carried out until now is of the empirical type. For this reason,there is a need for a rational approach to the molecular and cellularbasis of metabolic pathways and their regulation in order to stimulatefuture advances.The empirical investigations are based on the optimization of theculture system, exclusively considering input factors such as theselection of cellular lines, type and parameters of culture, bioreactordesign and elicitor addition, and output factors such as cellular growth,the uptake system of nutrients, production and yield. In a rationalapproach towards the elucidation of taxol and related taxaneproduction, our group has studied the relationship between the taxaneprofile and production and the expression of genes codifying forenzymes that participate in early, intermediate and late steps of theirbiosynthesis in elicited Taxus spp cell cultures. Our results show that elicitors induce a dramatic reprogramming of gene expression in Taxus cell cultures, whichlikely accounts for the enhanced production of taxol and related taxanes and we have alsodetermined some genes that control the main flux limiting steps. The application ofmetabolic engineering techniques for the production of taxol and taxanes of interest is also discussed.

Effect of intercropping wheat with forage legumes on wheat production and ground cover

The use of winter legumes in southern Brazil is hindered by the slow growth of these species during establishment exposing soil surface to erosion. Introduction of these species along with spring wheat (Triticum aestivum L.) was studied as a means of increasing ground cover during their initial establishment period, without reducing wheat grain yield. Two experiments were conducted in nearby areas, one in each year. Birdsfoot trefoil (Lotus corniculatus L.), red clover (Trifolium pratense L.) cultivar Quiñequelli, white clover (T. repens L.), and arrowleaf clover (T. vesiculosum Savi) did not reduce cereal yield in either year. Wheat yield was reduced by intercropped red clover cultivar Kenland and by subclover (T. subterraneum L.) in the first year. No grain yield differences due to intercropping with any legume were detected in the second year, when rainfall was below normal. Intercropping with wheat showed to be a practical alternative to enhance ground cover at establishing forage legumes.

Thidiazuron effects on shoot growth, return bloom, fruit set and nutrition of apples

Apple (Malus domestica Borkh.) trees, cultivars Gala and Fuji, were sprayed at full bloom with thidiazuron (TDZ) at doses of 0, 5, 10, or 20 g ha-1 of a.i. in order to evaluate its effects on plant growth and development, return bloom, fruit set, nutrition, and fruit yield. Fruit set increased with TDZ dose in 'Gala' but not in 'Fuji'. TDZ did not affect fruit yield in any cultivar. In 'Gala', the return bloom was reduced in about 50% at TDZ doses of 10 or 20 g ha-1. TDZ increased shoot growth in both cultivars. In leaves, TDZ decreased the concentration of Ca and Mg in 'Gala' and of Mg in 'Fuji', but did not affect the chlorophyll content, leaf area, length, width, and dry mass per cm² regardless of cultivar. In fruits, the effect of TDZ varied according to the portion evaluated. Highest doses of TDZ decreased the concentration of Ca and K in 'Gala' and of K in 'Fuji' in the entire fruits (flesh + skin); in the skin, highest doses of TDZ reduced the levels of N, Ca, and Mg in both cultivars, in addition to the level of K in 'Fuji'.

Si3N4 single-crystal nanowires grown from silicon micro- and nanoparticles near the threshold of passive oxidation

A simple and most promising oxide-assisted catalyst-free method is used to prepare silicon nitride nanowires that give rise to high yield in a short time. After a brief analysis of the state of the art, we reveal the crucial role played by the oxygen partial pressure: when oxygen partial pressure is slightly below the threshold of passive oxidation, a high yield inhibiting the formation of any silica layer covering the nanowires occurs and thanks to the synthesis temperature one can control nanowire dimensions

Divergence and genetic variability among superior rubber tree genotypes

The objective of this work was to estimate the genetic variability and divergence among 22 superior rubber tree (Hevea sp.) genotypes of the IAC 400 series. Univariate and multivariate analyses were performed using eight quantitative traits (descriptors), including yield. In the univariate analyses, the estimated parameters were: genetic and environmental variances; genetic and environmental coefficients of variation; and the variation index. The Mahalanobis generalized distance, the Tocher agglomerative method and canonical variables were used for the multivariate analyses. In the univariate analyses, variability was verified among the genotypes for all the variables evaluated. The Tocher method grouped the genotypes into 11 clusters of dissimilarity. The first four canonical variables explained 87.93% of the cumulative variation. The highest genetic variability was found in rubber yield-related traits, which contributed the most to the genetic divergence. The most divergent pairs of genotypes are suggested for crossbreeding. The genotypes evaluated are suitable for breeding and may be used to continue the IAC rubber tree breeding program.

Produtividade simulada de tubérculos de batata em cenários de mudanças climáticas

The objective of this study was to simulate potato (Solanum tuberosum) tuber yield in different climate change scenarios of increased carbon dioxide concentration [CO2] and air temperature, considering symmetric and asymmetric increases in minimum and maximum daily air temperatures. Spitters model was used to simulate Asterix cultivar tuber yield considering two growing seasons (spring and fall) recommended for Santa Maria, state of Rio Grande do Sul, Brazil. In each growing season, five planting dates were evaluated in climate scenarios of a hundred years with no increase in [CO2] and temperature (current scenario), and in scenarios with doubling [CO2] and temperature increases of 0, 1, 2, 3, 4, 5 and 6ºC. A symmetric increase of 4ºC and an asymmetric increase of 5ºC in air temperature offset the yield beneficial effect of increasing [CO2] during spring, whereas increase in air temperature does not affect potato tuber yield during fall. Anticipating planting date in spring and delaying it in fall decrease the negative impact of the increasing air temperature on potato tuber yield.

Stability and adaptability of runner peanut genotypes based on nonlinear regression and AMMI analysis

The objective of this work was to estimate the stability and adaptability of pod and seed yield in runner peanut genotypes based on the nonlinear regression and AMMI analysis. Yield data from 11 trials, distributed in six environments and three harvests, carried out in the Northeast region of Brazil during the rainy season were used. Significant effects of genotypes (G), environments (E), and GE interactions were detected in the analysis, indicating different behaviors among genotypes in favorable and unfavorable environmental conditions. The genotypes BRS Pérola Branca and LViPE‑06 are more stable and adapted to the semiarid environment, whereas LGoPE‑06 is a promising material for pod production, despite being highly dependent on favorable environments.