Periodic time series modeling of environmental proxy records with guaranteed positive growth rate estimation

Identifying a periodic time-series model from environmental records, without imposing the positivity of the growth rate, does not necessarily respect the time order of the data observations. Consequently, subsequent observations, sampled in the environmental archive, can be inversed on the time axis, resulting in a non-physical signal model. In this paper an optimization technique with linear constraints on the signal model parameters is proposed that prevents time inversions. The activation conditions for this constrained optimization are based upon the physical constraint of the growth rate, namely, that it cannot take values smaller than zero. The actual constraints are defined for polynomials and first-order splines as basis functions for the nonlinear contribution in the distance-time relationship. The method is compared with an existing method that eliminates the time inversions, and its noise sensitivity is tested by means of Monte Carlo simulations. Finally, the usefulness of the method is demonstrated on the measurements of the vessel density, in a mangrove tree, Rhizophora mucronata, and the measurement of Mg/Ca ratios, in a bivalve, Mytilus trossulus.

Prediction of moisture, calorific value, ash and carbon content of two dedicated bioenergy crops using near-infrared spectroscopy

The potential of near infrared spectroscopy in conjunction with partial least squares regression to predict Miscanthus xgiganteus and short rotation coppice willow quality indices was examined. Moisture, calorific value, ash and carbon content were predicted with a root mean square error of cross validation of 0.90% (R2 = 0.99), 0.13 MJ/kg (R2 = 0.99), 0.42% (R2 = 0.58), and 0.57% (R2 = 0.88), respectively. The moisture and calorific value prediction models had excellent accuracy while the carbon and ash models were fair and poor, respectively. The results indicate that near infrared spectroscopy has the potential to predict quality indices of dedicated energy crops, however the models must be further validated on a wider range of samples prior to implementation. The utilization of such models would assist in the optimal use of the feedstock based on its biomass properties.

A comprehensive investigation of the synthesis of prebiotic galactooligosaccharides by whole cells of Bifidobacterium bifidum NCIMB 41171

The synthesis of galactooligosaccharides (GOS) by whole cells of Bifidobacterium bifidum NCIMB 41171 was investigated by developing a set of mathematical models. These were second order polynomial equations, which described responses related to the production of GOS constituents, the selectivity of lactose conversion into GOS, and the relative composition of the produced GOS mixture, as a function of the amount of biocatalyst, temperature, initial lactose concentration, and time. The synthesis reactions were followed for up to 36 h. Samples were withdrawn every 4 h, tested for β-galactosidase activity, and analysed for their carbohydrate content. GOS synthesis was well explained by the models, which were all significant (P < 0.001). The GOS yield increased as temperature increased from 40 °C to 60 °C, as transgalactosylation became more pronounced compared to hydrolysis. The relative composition of GOS produced changed significantly with the initial lactose concentration (P < 0.001); higher ratios of tri-, tetra-, and penta-galactooligosaccharides to transgalactosylated disaccharides were obtained as lactose concentration increased. Time was a critical factor, as a balanced state between GOS synthesis and hydrolysis was roughly attained in most cases between 12 and 20 h, and was followed by more pronounced GOS hydrolysis than synthesis.

The voice of the consumer speaks forcefully in brand identity: user-generated content forces smart marketers to listen

User-generated content (UGC) is attracting a great deal of interest - some of it effective, some misguided. This article reviews the marketing-related factors that gave rise to UGC, tracing the relevant development of market orientation, social interaction, word of mouth, brand relationships, consumer creativity, co-creation, and customization, largely through the pages of the Journal of Advertising Research over the last 40 (or so) of its 50 years. The authors then discuss the characteristic features of UGC and how they differ from (and are similar to) these concepts. The insights thus gained will help practitioners and researchers understand what UGC is (and is not) and how it should (and should not) be used.

Performance of palm- based fat blends with a low saturated fat content in puff pastry

Four fat blends based on palm fractions in combination with high oleic sunflower oil (HOSF) with a relatively low saturated fatty acid content (29.2±0.85%, i.e. less than 50% of that of butter) were prepared. The saturated fat was located in different triacylglycerols (TAG) structures in each blend. Principal saturated TAG were derived from palm stearin (POs, containing tripalmitoyl glycerol - PPP), palm mid fraction (PMF, containing 1,3-dipalmitoyl-2-oleoyl glycerol - POP) and interesterified PMF (inPMF, containing PPP, POP and rac-1,2-dipalmitoyl-3-oleoyl glycerol - PPO). Thus, in blend 1, composed of POs and HOSF, the saturates resided principally in PPP. In blend 2, composed of POs, PMF and HOSF, the principal saturate-containing TAG were PPP and POP. Blend 3, composed of inPMF and HOSF, was similar to blend 2 except that the disaturated TAG comprised a 2:1 mixture of PPO:POP. Finally, blend 4, a mixture of PMF and HOSF, had saturates present mainly as POP. The physical properties and the functionality of blends, as shortenings for puff pastry laminated in a warm bakery environment (20-30°C), were compared with each other, and with butter. Puff pastry prepared with blend 1 (POs:HOSF 29:71) and blend 4 (PMF:HOSF 41:59), was very hard; blend 2 (POs:PMF:HOSF 13:19:68) was most similar to butter in the compressibility of the baked product and it performed well in an independent baking trial; blend 3 (inPMF:HOSF 40:60) gave a product that required a higher force for compression than butter.

Memo to marketers: quantitative evidence for change: how user-generated content really affects brands

Developed in response to the new challenges of the social Web, this study investigates how involvement with brand-related user-generated content (UGC) affects consumers’ perceptions of brands. The authors develop a model that provides new insights into the links between drivers of UGC creation, involvement, and consumer-based brand equity. Expert opinions were sought on a hypothesized model, which further was tested through data from an online survey of 202 consumers. The results provide guidance for managerial initiatives involving UGC campaigns for brand building. The findings indicate that consumer perceptions of co-creation, community, and self-concept have a positive impact on UGC involvement that, in turn, positively affects consumer based brand equity. These empirical results have significant implications for avoiding problems and building deeper relationships between consumers and brands in the age of social media.

The possibility of lowering oil content of potato chips by combining atmospheric frying with postfrying vacuum application

Four protocols involving the application of low pressures, either toward the end of frying or after frying, were investigated with the aim of lowering the oil content of potato chips. Protocol 1 involving frying at atmospheric pressure followed by a 3 min draining time constituted the control. Protocol 2 involved lowering of pressure to 13.33 kPa, 40 s before the end of frying, followed by draining for 3 min at the same pressure. Protocol 3 was the same as protocol 2, except that the pressure was lowered 3 s before the end of frying. Protocol 4 involved lowering the pressure to 13.33 kPa after the product was lifted from the oil and holding it at this value over the draining time of 3 min. Protocol 4 gave a product having the lowest oil content (37.12 g oil/100 g defatted dry matter), while protocol 2 gave the product with highest oil content (71.10 g oil/100 g defatted dry matter), followed by those obtained using protocols 1 and 3(68.48 g oil/100 g defatted dry matter and 52.50 g oil/100 g defatted dry matter, respectively). Protocol 4 was further evaluated to study the effects of draining times and vacuum applied, and compared with the control. It was noted that over the modest range of pressures investigated, there was no significant effect of the vacuum applied on the oil content of the product. This study demonstrates that the oil content of potato chips can be lowered significantly by combining atmospheric frying with draining under vacuum.

Impact of the quantity and flavonoid content of fruits and vegetables on markers of intake in adults with an increased risk of cardiovascular disease: the FLAVURS Trial

Purpose Limited robust randomised controlled trials investigating fruit and vegetable (F&V) intake in people at risk of cardiovascular disease (CVD) exist. We aimed to design and validate a dietary strategy of increasing flavonoid-rich versus flavonoid-poor F&V consumption on nutrient biomarker profile. Methods A parallel, randomised, controlled, dose–response dietary intervention study. Participants with a CVD relative risk of 1.5 assessed by risk scores were randomly assigned to one of the 3 groups: habitual (control, CT), high-flavonoid (HF) or low-flavonoid (LF) diets. While the CT group (n = 57) consumed their habitual diet throughout, the HF (n = 58) and LF (n = 59) groups sequentially increased their daily F&V intake by an additional 2, 4 and 6 portions for 6-week periods during the 18-week study. Results Compliance to target numbers and types of F&V was broadly met and verified by dietary records, and plasma and urinary biomarkers. Mean (±SEM) number of F&V portions/day consumed by the HF and LF groups at baseline (3.8 ± 0.3 and 3.4 ± 0.3), 6 weeks (6.3 ± 0.4 and 5.8 ± 0.3), 12 weeks (7.0 ± 0.3 and 6.8 ± 0.3) and 18 weeks (7.6 ± 0.4 and 8.1 ± 0.4), respectively, was similar at baseline yet higher than the CT group (3.9 ± 0.3, 4.3 ± 0.3, 4.6 ± 0.4, 4.5 ± 0.3) (P = 0.015). There was a dose-dependent increase in dietary and urinary flavonoids in the HF group, with no change in other groups (P = 0.0001). Significantly higher dietary intakes of folate (P = 0.035), non-starch polysaccharides (P = 0.001), vitamin C (P = 0.0001) and carotenoids (P = 0.0001) were observed in both intervention groups compared with CT, which were broadly supported by nutrient biomarker analysis. Conclusions The success of improving nutrient profile by active encouragement of F&V intake in an intervention study implies the need for a more hands-on public health approach.

Analysis of growth physiology and phytochemical content of Eruca and Diplotaxis Cultivars under different light and temperature regimes

Rocket is a leafy brassicaceous salad crop that encompasses two major genera (Diplotaxis and Eruca) and many different cultivars. Rocket is a rich source of antioxidants and glucosinolates, many of which are produced as secondary products by the plant in response to stress. In this paper we examined the impact of temperature and light stress on several different cultivars of wild and salad rocket. Growth habit of the plants varied in response to stress and with different genotypes, reflecting the wide geographical distribution of the plant and the different environments to which the genera have naturally adapted. Preharvest environmental stress and genotype also had an impact on how well the cultivar was able to resist postharvest senescence, indicating that breeding or selection of senescence-resistant genotypes will be possible in the future. The abundance of key phytonutrients such as carotenoids and glucosinolates are also under genetic control. As genetic resources improve for rocket it will therefore be possible to develop a molecular breeding programme specifically targeted at improving stress resistance and nutritional levels of plant secondary products. Concomitantly, it has been shown in this paper that controlled levels of abiotic stress can potentially improve the levels of chlorophyll, carotenoids and antioxidant activity in this leafy vegetable.

A kinetic model for the formation of acrylamide during the finish-frying of commercial French fries

Acrylamide is formed from reducing sugars and asparagine during the preparation of French fries. The commercial preparation of French fries is a multi-stage process involving the preparation of frozen, par-fried potato strips for distribution to catering outlets where they are finish fried. The initial blanching, treatment in glucose solution and par-frying steps are crucial since they determine the levels of precursors present at the beginning of the finish frying process. In order to minimize the quantities of acrylamide in cooked fries, it is important to understand the impact of each stage on the formation of acrylamide. Acrylamide, amino acids, sugars, moisture, fat and color were monitored at time intervals during the frying of potato strips which had been dipped in varying concentrations of glucose and fructose during a typical pretreatment. A mathematical model of the finish-frying was developed based on the fundamental chemical reaction pathways, incorporating moisture and temperature gradients in the fries. This showed the contribution of both glucose and fructose to the generation of acrylamide, and accurately predicted the acrylamide content of the final fries.