Road network extraction with new vectorization and pruning from high-resolution RS images

With the increasing resolution of remote sensing images, road network can be displayed as continuous and homogeneity regions with a certain width rather than traditional thin lines. Therefore, road network extraction from large scale images refers to reliable road surface detection instead of road line extraction. In this paper, a novel automatic road network detection approach based on the combination of homogram segmentation and mathematical morphology is proposed, which includes three main steps: (i) the image is classified based on homogram segmentation to roughly identify the road network regions; (ii) the morphological opening and closing is employed to fill tiny holes and filter out small road branches; and (iii) the extracted road surface is further thinned by a thinning approach, pruned by a proposed method and finally simplified with Douglas-Peucker algorithm. Lastly, the results from some QuickBird images and aerial photos demonstrate the correctness and efficiency of the proposed process.

There, yet not there : human relationships with technology

There is a “reality” to being online which we know to be false. We are simultaneously “there” but “not there” as we talk, work and play with others in online spaces. We move between physical and virtual spaces in ways that realise the predictions made for computers in the mid-20th Century and enact scenarios from science fiction. We are left wondering if our thoughts - through our disembodied selves - have become a “second self” or if we have become part of the machine itself. Information and communication technology (ICT) have brought differing human and technological agencies to all aspects of contemporary life including teaching and learning. This paper attempts to identify and categorise these agencies through the genres of technics and to illustrate them – and our relationships with technology - through reference to philosophy, fiction and reality. It also stands as an introduction to this special issue on the agency of technology.

Blogs, wikis and podcasts : collaborative knowledge building tools in a design and technology course

Design and Technology has become an important part of the school curriculum. In Queensland, Australia, Technology (which encompasses Design) is one of the Key Learning Areas (KLAs) for students in the first ten years of schooling. This KLA adopts a student-centred, hands-on constructivist approach to teaching and learning. The ability to conceptualise and implement appropriate learning experiences, however, has been a challenge for some early career teachers. This paper describes how Design and Technology is being taught to pre-service primary teachers at an Australian University through their involvement in a range of authentic problem-solving activities supported by social learning tools such as wikis and blogs. An interview with a sample from this group (N=5) provides an insight into how these social software tools enhanced their knowledge and learning. This paper will describe how these social learning tools impact on the agency of learning.

An ecological assessment of secondary poisoning risk in the Australian sugarcane industry

Rodenticide use in agriculture can lead to the secondary poisoning of avian predators. Currently the Australian sugarcane industry has two rodenticides, Racumin® and Rattoff®, available for in-crop use but, like many agricultural industries, it lacks an ecologically-based method of determining the potential secondary poisoning risk the use of these rodenticides poses to avian predators. The material presented in this thesis addresses this by: a. determining where predator/prey interactions take place in sugar producing districts; b. quantifying the amount of rodenticide available to avian predators and the probability of encounter; and c. developing a stochastic model that allows secondary poisoning risk under various rodenticide application scenarios to be investigated. Results demonstrate that predator/prey interactions are highly constrained by environmental structure. Rodents used crops that provided high levels of canopy cover and therefore predator protection and poorly utilised open canopy areas. In contrast, raptors over-utilised areas with low canopy cover and low rodent densities, but which provided high accessibility to prey. Given this pattern of habitat use, and that industry baiting protocols preclude rodenticide application in open canopy crops, these results indicate that secondary poisoning can only occur if poisoned rodents leave closed canopy crops and become available for predation in open canopy areas. Results further demonstrate that after in-crop rodenticide application, only a small proportion of rodents available in open areas are poisoned and that these rodents carry low levels of toxicant. Coupled with the low level of rodenticide use in the sugar industry, the high toxic threshold raptors have to these toxicants and the low probability of encountering poisoned rodents, results indicate that the risk of secondary poisoning events occurring is minimal. A stochastic model was developed to investigate the effect of manipulating factors that might influence secondary poisoning hazard in a sugarcane agro-ecosystem. These simulations further suggest that in all but extreme scenarios, the risk of secondary poisoning is also minimal. Collectively, these studies demonstrate that secondary poisoning of avian predators associated with the use of the currently available rodenticides in Australian sugar producing districts is minimal. Further, the ecologically-based method of assessing secondary poisoning risk developed in this thesis has broader applications in other agricultural systems where rodenticide use may pose risks to avian predators.

Extraction of road lanes from high-resolution stereo aerial imagery based on maximum likelihood segmentation and texture enhancement

Accurate road lane information is crucial for advanced vehicle navigation and safety applications. With the increasing of very high resolution (VHR) imagery of astonishing quality provided by digital airborne sources, it will greatly facilitate the data acquisition and also significantly reduce the cost of data collection and updates if the road details can be automatically extracted from the aerial images. In this paper, we proposed an effective approach to detect road lanes from aerial images with employment of the image analysis procedures. This algorithm starts with constructing the (Digital Surface Model) DSM and true orthophotos from the stereo images. Next, a maximum likelihood clustering algorithm is used to separate road from other ground objects. After the detection of road surface, the road traffic and lane lines are further detected using texture enhancement and morphological operations. Finally, the generated road network is evaluated to test the performance of the proposed approach, in which the datasets provided by Queensland department of Main Roads are used. The experiment result proves the effectiveness of our approach.

Evaluation of aerial remote sensing techniques for vegetation management in power line corridors

The following paper presents an evaluation of airborne sensors for use in vegetation management in powerline corridors. Three integral stages in the management process are addressed including, the detection of trees, relative positioning with respect to the nearest powerline and vegetation height estimation. Image data, including multi-spectral and high resolution, are analyzed along with LiDAR data captured from fixed wing aircraft. Ground truth data is then used to establish the accuracy and reliability of each sensor thus providing a quantitative comparison of sensor options. Tree detection was achieved through crown delineation using a Pulse-Coupled Neural Network (PCNN) and morphologic reconstruction applied to multi-spectral imagery. Through testing it was shown to achieve a detection rate of 96%, while the accuracy in segmenting groups of trees and single trees correctly was shown to be 75%. Relative positioning using LiDAR achieved a RMSE of 1.4m and 2.1m for cross track distance and along track position respectively, while Direct Georeferencing achieved RMSE of 3.1m in both instances. The estimation of pole and tree heights measured with LiDAR had a RMSE of 0.4m and 0.9m respectively, while Stereo Matching achieved 1.5m and 2.9m. Overall a small number of poles were missed with detection rates of 98% and 95% for LiDAR and Stereo Matching.

Unwrapping an ancient Egyptian mummy using x-rays

This article describes a project to unwrap an ancient Egyptian mummy using X-ray computed tomography (CT). About 600 X-ray CT images were obtained through the mummified body of a female named Tjetmutjengebtiu (or Jeni for short), who was a singer in the great temple of Karnak in Egypt during the 22nd dynasty (c. 945-715 BC). The X-ray CT images reveal details of the remains of body organs, wrappings and jewellery. 3D reconstructions of Jeni’s teeth suggest that she was probably only around 20 years old when she died, although the cause of death cannot be ascertained from the CT scans. The CT images were used to build a 3D model of Jeni’s head which enabled an artist to paint a picture of what Jeni may have looked like during life. A PowerPoint presentation and movie clips are provided as supplementary material that may be useful for teaching.

Queensland government agency libraries review : literature review

Dr Gillian Hallam is project leader for the Queensland Government Agency Libraries Review. As an initial step in the project, a literature review was commissioned to guide the research activities and inform the development of options for potential future service delivery models for the Government agency libraries. The review presents an environmental scan and review of the professional and academic literature to consider a range of current perspectives on library and information services. Significant in this review is the focus on the specific issues and challenges impacting on contemporary government libraries and their staff. The review incorporates four key areas: current directions in government administration; trends in government library services; issues in contemporary special libraries; and the skills and competencies of special librarians. Rather than representing an exhaustive review, the research has primarily centred on recent journal articles, conference papers, reports and web resources. Commentary prepared by national and international library associations has also played a role informing this review, as does the relevant State and Federal government documentation and reporting.

Youth media production and technology skills acquisition : opportunities for agency

This chapter explores youth media production involving video games within a formal media education context. It investigates the possibilities for agency in student production contexts where emphasis is on the acquisition of technological skills. It explores alternatives to the well-established approach to media education that aims to develop students’ critical reading capacities as a means to agency. The chapter discusses some of the implications of the differences between youth production with ‘older’ technologies like video and new forms like multimedia production. It also discusses theories of agency as they relate to media education and the challenges of considering agency in relation to new media production. Post structuralist concepts are introduced and used as the basis to explore opportunities for agency in the context of students designing and producing aspects of video games. The chapter argues that the creative and experimental work students undertake while using software to make games artefacts opens up possibilities for agency.

Literacy education in the context of globalisation

This review chapter provides an overview of English language literacy education in the contexts of cultural and economic globalisation. Drawing case study examples of India and China, the authors outline three complementary models: the development paradigm, the hegemony paradigm and the new literacies paradigm. The analysis focuses on effects of the spread of English on vernacular languages and the non-synchronous issues raised by digital production cultures. Noting the difficulties of education systems in contending with new literacies - it argues for the reframing of transnational relations, global material conditions and new communications technologies as the objects of critical literacy education.

Towards a model of understanding strategic decision-making in micro-firms : exploring the Australian information technology sector

This study explores strategic decision-making (SDM) in micro-firms, an economically significant business subsector. As extant large- and small-firm literature currently proffers an incomplete characterization of SDM in very small enterprises, a multiple-case methodology was used to investigate how these firms make strategic decisions. Eleven Australian Information Technology service micro-firms participated in the study. Using an information-processing lens, the study uncovered patterns of SDM in micro-firms and derived a theoretical micro-firm SDM model. This research also identifies several implications for micro-firm management and directions for future research, contributing to the understanding of micro-firm SDM in both theory and practice.

Why adopt now? Multiple case studies and survey studies comparing small, medium and large firms

While a number of factors have been highlighted in the innovation adoption literature, little is known about the key triggers of innovation adoption across differently-sized firms. This study compares case studies of small, medium and large manufacturing firms who recently decided to adopt a process innovation. We also employ organizational surveys from 134 firms investigating the factors which influence innovation adoption. The quantitative results support the qualitative findings that the external pressures are a trigger among small to medium firms, while the larger firm’s adoption was associated with internal causes.

Engagement with information and communication technology and psychological well-being

The impact of technology on the health and well-being of workers has been a topic of interest since computers and computerized technology were widely introduced in the 1980s. Of recent concern is the impact of rapid technological advances on individuals’ psychological well-being, especially due to advancements in mobile technology which have increased many workers’ accessibility and expected productivity. In this chapter we focus on the associations between occupational stress and technology, especially behavioral and psychological reactions. We discuss some key facilitators and barriers associated with users’ acceptance of and engagement with information and communication technology. We conclude with recommendations for ongoing research on managing occupational health and well-being in conjunction with technological advancements.