Social paranoia and absurdist fiction in Cold War America and Soviet Russia: a comparative study

This thesis explores the theme of social paranoia as depicted in the Absurdist fiction of Cold War America and Soviet Russia. The central hypothesis informing this research maintains that, despite the ideology of moral and cultural “Otherness” constructed and reinforced by both nations throughout much of twentieth century, the US and the Soviet Union more often than not functioned as mirror images of paranoia and suspicion. Much of the fiction produced in Russia from the Revolution onwards and in the US during the Cold War period highlights how these two ostensibly irreconcilable nations were consumed by similar fears and gripped by an equally pervasive paranoia. These parallel conditions of anxiety and mistrust led to a surprising congruity of literary responses, which transcended the ideological divide between capitalism and communism and, as such, underscored the homogeny of fear which lay beneath the façade of constructed difference. I contend that, because Soviet Russia and the America of the Cold War period were nations consumed by fear and suspicion, authors living in both countries became preoccupied by the mechanics of such deeply paranoid societies. Consequently, much of the fiction of the US and the Soviet Union during this period was preoccupied with the themes of paranoia, conspiracy, intensive bureaucracy and the politicisation of science, which resulted in the terror of the Nuclear Age. This thesis explores how these central themes unite apparently diverse literary texts and illustrate the uniformity of terror which transcended both the physical and ideological boundaries separating the United States and the Soviet Union. In doing so, this research focuses primarily on the multi-faceted manifestations of paranoia in selected works by Soviet authors Mikhail Bulgakov, Daniil Kharms and Yuli Daniel, and American authors Joseph Heller, Thomas Pynchon and Kurt Vonnegut. Focusing on key works by each author, this research considers these texts as products of two culturally diverse, yet equally paranoid societies and explores their preoccupation with issues of spying, infiltration and conspiracy. This thesis thus emphasises how these authors counter simplistic notions of Cold War Otherness by revealing two nations possessed by a similar sense of vulnerability and insecurity. Furthermore, this thesis examines how this social anxiety is reinforced by the way in which these authors position issues such as the mechanics of the bureaucratic system and clandestine scientific experimentation as the focal point of the paranoid imagination. Ultimately, by examining the concordance of paranoiac representation in America and the Soviet Union during this period, I demonstrate that these ostensibly divergent nations harboured similar fears and insecurities.

Training Finnish and English Speakers to Produce Non-native Vowels

The subject of this thesis was the acquisition of difficult non-native vowels by speakers of two different languages. In order to study the subject, a group of Finnish speakers and another group of American English speakers were recruited and they underwent a short listen-and-repeat training that included as stimuli the semisynthetically created pseudowords /ty:ti/ and /tʉ:ti/. The aim was to study the effect of the training method on the subjects as well as the possible influence of the speakers’ native language on the process of acquisition. The selection of the target vowels /y/ and /ʉ/ was made according to the Speech Learning Model and Perceptual Assimilation Model, both of which predict that second language speech sounds that share similar features with sounds of a person’s native language are most difficult for the person to learn. The vowel /ʉ/ is similar to Finnish vowels as well as to vowels of English, whereas /y/ exists in Finnish but not in English, although it is similar to other English vowels. Therefore, it can be hypothesized that /ʉ/ is a difficult vowel for both groups to learn and /y/ is difficult for English speakers. The effect of training was tested with a pretest-training-posttest protocol in which the stimuli were played alternately and the subjects’ task was to repeat the heard stimuli. The training method was thought to improve the production of non-native sounds by engaging different feedback mechanisms, such as auditory and somatosensory. These, according to Template Theory, modify the production of speech by altering the motor commands from the internal speech system or the feedforward signal which translates the motoric commands into articulatory movements. The subjects’ productions during the test phases were recorded and an acoustic analysis was performed in which the formant values of the target vowels were extracted. Statistical analyses showed a statistically significant difference between groups in the first formant, signaling a possible effect of native motor commands. Furthermore, a statistically significant difference between groups was observed in the standard deviation of the formants in the production of /y/, showing the uniformity of native production. The training had no observable effect, possibly due to the short nature of the training protocol.

Développement de fibres optiques composites pour la génération du supercontinuum dans l’infrarouge

Les sources laser à large bande possédant les caractéristiques requises pour émettre sur la plage spectrale correspondant à la seconde fenêtre de transmission atmosphérique (3 à 5 μm) exercent un attrait considérable pour divers domaines tels que la télédétection de polluants atmosphériques et les contremesures infrarouges. Les supercontinua générés à l’intérieur de fibres optiques représentent une option intéressante pour réaliser ce type de sources laser. En effet, ils possèdent une intensité élevée, un large contenu spectral, une excellente directionnalité de faisceau, ainsi qu’un bon potentiel pour constituer des sources lumineuses compactes et robustes. Toutefois, la génération d’un tel supercontinuum implique certains défis à relever sur le plan de la conception des fibres optiques employées. En fait, ces fibres optiques doivent présenter de faibles pertes de propagation sur la plage spectrale de 3 à 5 μm, posséder un paramètre de non-linéarité élevé et permettre le pompage en régime anomal de dispersion à des longueurs d’onde pour lesquelles des sources laser compactes sont offertes commercialement. En matière de robustesse, ces fibres doivent également démontrer de bonnes propriétés mécaniques ainsi qu’une stabilité chimique appropriée vis-à-vis de la corrosion causée par l’humidité. Dans le cadre de cette thèse, un nouveau type de fibres composites à saut d’indice fortement contrasté a été développé pour atteindre ces objectifs de génération de supercontinuum. Ce type de fibres combine respectivement un verre de tellurite et un verre de germanate pour son coeur et sa gaine permettant ainsi d’atteindre une différence d’indice de réfraction d’environ 0.3 entre ces deux dernières structures. Grâce à cet important saut d’indice, ces fibres peuvent fortement confiner les modes optiques à l’intérieur de leur coeur, ce qui leur donne la possibilité d’atteindre un niveau élevé de non-linéarité et d’optimiser leurs caractéristiques de dispersion chromatique pour la génération du supercontinuum. D’autre part, leur section transversale toute solide leur confère aussi une meilleure stabilité environnementale comparativement à celle démontrée par les fibres optiques microstructurées à base de verres d’oxydes de métaux lourds, de verres de chalcogénure et de verres fluorés. Toutefois, leur fabrication nécessite l’appariement de verres dont les propriétés thermomécaniques concordent suffisamment ensemble pour permettre leur fibrage. Les travaux effectués ici démontrent la production de fibres optiques composites et leur potentiel pour la génération du supercontinuum dans l’infrarouge moyen.

Desenvolvimento de um cerâmico Al2O3/TI(C,N) para uso em maquinação

O principal objetivo deste trabalho é preparar um cermeto do tipo Al2O3/Ti(C,N) com propriedades mecânicas adequadas à sua utilização na maquinação de materiais do tipo DIN ISO 513:K01-K10 e ISO H01-H10. De forma a incrementar a sinterabilidade do cermeto investigou-se o efeito da adição de dopantes metálicos, nomeadamente alumínio metálico (Al) e hidreto de titânio (TiH2) e o efeito da substituição da moagem convencional por moagem de alta energia. As variáveis das etapas principais de processamento, i.e., da moagem, prensagem e sinterização, foram selecionadas com trabalho realizado quer na Universidade de Aveiro quer na empresa Palbit. Foram preparadas três composições do cermeto Al2O3/Ti(C,N) com adições de 5%TiH2, 1%Al e 5%TiH21%Al através da moagem de alta energia. Os parâmetros de moagem, i.e. a velocidade de rotação, o rácio bolas/pó e o tempo de moagem foram otimizados para os seguintes valores: 350 rpm, 10:1 e 5 h, respetivamente. A utilização da moagem de alta energia permitiu uma redução do tamanho de partícula dos pós até aproximadamente 100 nm e a obtenção de uma boa uniformidade da distribuição das fases (Al2O3+Ti(C,N)). A etapa de conformação foi efetuada por prensagem uniaxial seguida de prensagem isostática. A avaliação da reatividade dos cermetos através de dilatometria em atmosfera de vácuo revelou que a densificação é maioritariamente realizada em estado sólido. A adição de apenas 1%Al é a menos efetiva para a densificação. Os cermetos foram sinterizados através de sinterização convencional em forno de vazio a 1650ºC e prensagem a quente (1650ºC com uma pressão uniaxial de 25 MPa). Os valores de densificação obtidos, aproximadamente 80% e 100%, respetivamente, indicam que a aplicação de pressão durante a sinterização é efetiva para atingir densificações elevadas nos compactos, compatíveis com as suas aplicações tecnológicas. As propriedades mecânicas de dureza e de tenacidade avaliadas nos três cermetos apresentaram valores aproximados de 1800-1900 HV50 para a dureza e entre 5.4 e 7.7 MPa.m1/2 para a tenacidade à fratura.

Self-Assembled InAs/GaAs Quantum Dot Solar Cells

Our work focuses on experimental and theoretical studies aimed at establishing a fundamental understanding of the principal electrical and optical processes governing the operation of quantum dot solar cells (QDSC) and their feasibility for the realization of intermediate band solar cell (IBSC). Uniform performance QD solar cells with high conversion efficiency have been fabricated using carefully calibrated process recipes as the basis of all reliable experimental characterization. The origin for the enhancement of the short circuit current density (Jsc) in QD solar cells was carefully investigated. External quantum efficiency (EQE) measurements were performed as a measure of the below bandgap distribution of transition states. In this work, we found that the incorporation of self-assembled quantum dots (QDs) interrupts the lattice periodicity and introduce a greatly broadened tailing density of states extending from the bandedge towards mid-gap. A below-bandgap density of states (DOS) model with an extended Urbach tail has been developed. In particular, the below-bandgap photocurrent generation has been attributed to transitions via confined energy states and background continuum tailing states. Photoluminescence measurement is used to measure the energy level of the lowest available state and the coupling effect between QD states and background tailing states because it results from a non-equilibrium process. A basic I-V measurement reveals a degradation of the open circuit voltage (Voc) of QD solar cells, which is related to a one sub-bandgap photon absorption process followed by a direct collection of the generated carriers by the external circuit. We have proposed a modified Shockley-Queisser (SQ) model that predicts the degradation of Voc compared with a reference bulk device. Whenever an energy state within the forbidden gap can facilitate additional absorption, it can facilitate recombination as well. If the recombination is non-radiative, it is detrimental to solar cell performance. We have also investigated the QD trapping effects as deep level energy states. Without an efficient carrier extraction pathway, the QDs can indeed function as mobile carriers traps. Since hole energy levels are mostly connected with hole collection under room temperature, the trapping effect is more severe for electrons. We have tried to electron-dope the QDs to exert a repulsive Coulomb force to help improve the carrier collection efficiency. We have experimentally observed a 30% improvement of Jsc for 4e/dot devices compared with 0e/dot devices. Electron-doping helps with better carrier collection efficiency, however, we have also measured a smaller transition probability from valance band to QD states as a direct manifestation of the Pauli Exclusion Principle. The non-linear performance is of particular interest. With the availability of laser with on-resonance and off-resonance excitation energy, we have explored the photocurrent enhancement by a sequential two-photon absorption (2PA) process via the intermediate states. For the first time, we are able to distinguish the nonlinearity effect by 1PA and 2PA process. The observed 2PA current under off-resonant and on-resonant excitation comes from a two-step transition via the tailing states instead of the QD states. However, given the existence of an extended Urbach tail and the small number of photons available for the intermediate states to conduction band transition, the experimental results suggest that with the current material system, the intensity requirement for an observable enhancement of photocurrent via a 2PA process is much higher than what is available from concentrated sun light. In order to realize the IBSC model, a matching transition strength needs to be achieved between valance band to QD states and QD states to conduction band. However, we have experimentally shown that only a negligible amount of signal can be observed at cryogenic temperature via the transition from QD states to conduction band under a broadband IR source excitation. Based on the understanding we have achieved, we found that the existence of the extended tailing density of states together with the large mismatch of the transition strength from VB to QD and from QD to CB, has systematically put into question the feasibility of the IBSC model with QDs.

A high-flux BEC source for mobile atom interferometers

Quantum sensors based on coherent matter-waves are precise measurement devices whose ultimate accuracy is achieved with Bose-Einstein condensates (BECs) in extended free fall. This is ideally realized in microgravity environments such as drop towers, ballistic rockets and space platforms. However, the transition from lab-based BEC machines to robust and mobile sources with comparable performance is a challenging endeavor. Here we report on the realization of a miniaturized setup, generating a flux of 4x10(5) quantum degenerate Rb-87 atoms every 1.6 s. Ensembles of 1 x 10(5) atoms can be produced at a 1 Hz rate. This is achieved by loading a cold atomic beam directly into a multi-layer atom chip that is designed for efficient transfer from laser-cooled to magnetically trapped clouds. The attained flux of degenerate atoms is on par with current lab-based BEC experiments while offering significantly higher repetition rates. Additionally, the flux is approaching those of current interferometers employing Raman-type velocity selection of laser-cooled atoms. The compact and robust design allows for mobile operation in a variety of demanding environments and paves the way for transportable high-precision quantum sensors.

Optimising plant bed performance through adaptive research with the Australian sweetpotato industry

A key driver of Australian sweetpotato productivity improvements and consumer demand has been industry adoption of disease-free planting material systems. On a farm isolated from main Australian sweetpotato areas, virus-free germplasm is annually multiplied, with subsequent 'pathogen-tested' (PT) sweetpotato roots shipped to commercial Australian sweetpotato growers. They in turn plant their PT roots into specially designated plant beds, commencing in late winter. From these beds, they cut sprouts as the basis for their commercial fields. Along with other intense agronomic practices, this system enables Australian producers to achieve worldRSQUOs highest commercial yields (per hectare) of premium sweetpotatoes. Their industry organisation, ASPG (Australian Sweetpotato Growers Inc.), has identified productivity of mother plant beds as a key driver of crop performance. Growers and scientists are currently collaborating to investigate issues such as catastrophic plant beds losses; optimisation of irrigation and nutrient addition; rapidity and uniformity of initial plant bed harvests; optimal plant bed harvest techniques; virus re-infection of plant beds; and practical longevity of plant beds. A survey of 50 sweetpotato growers in Queensland and New South Wales identified a substantial diversity in current plant bed systems, apparently influenced by growing district, scale of operation, time of planting, and machinery/labour availability. Growers identified key areas for plant bed research as: optimising the size and grading specifications of PT roots supplied for the plant beds; change in sprout density, vigour and performance through sequential cuttings of the plant bed; optimal height above ground level to cut sprouts to maximise commercial crop and plant bed performance; and use of structures and soil amendments in plant bed systems. Our ongoing multi-disciplinary research program integrates detailed agronomic experiments, grower adaptive learning sites, product quality and consumer research, to enhance industry capacity for inspired innovation and commercial, sustainable practice change.

Acreditação do Laboratório de Metrologia da Frilabo para Ensaios e Calibrações em Temperaturas

O trabalho desenvolvido centrou-se na preparação da acreditação NP EN ISO/IEC 17025 do Laboratório de Metrologia da empresa Frilabo para prestação de serviços na área das temperaturas, no ensaio a câmaras térmicas e na calibração de termómetros industriais. Considerando o âmbito do trabalho desenvolvido, são abordados nesta tese conceitos teóricos sobre temperatura e incertezas bem como considerações técnicas de medição da temperatura e cálculo de incertezas. São também referidas considerações sobre os diferentes tipos de câmaras térmicas e termómetros. O texto apresenta os documentos elaborados pelo autor sobre os procedimentos de ensaio a câmaras térmicas e respetivo procedimento de cálculo da incerteza. Também estão presentes neste texto documentos elaborados pelo autor sobre os procedimentos de calibração de termómetros industriais e respetivo procedimento de cálculo da incerteza. Relativamente aos ensaios a câmara térmicas e calibração de termómetros o autor elaborou os fluxogramas sobre a metodologia da medição da temperatura nos ensaios, a metodologia de medição da temperatura nas calibrações, e respetivos cálculos de incertezas. Nos diferentes anexos estão apresentados vários documentos tais como o modelo de folha de cálculo para tratamento de dados relativos ao ensaio, modelo de folha de cálculo para tratamento de dados relativo às calibrações, modelo de relatório de ensaio, modelo de certificado de calibração, folhas de cálculo para gestão de clientes/equipamentos e numeração automática de relatórios de ensaio e certificados de calibração que cumprem os requisitos de gestão do laboratório. Ainda em anexo constam todas as figuras relativas à monitorização da temperatura nas câmara térmicas como também as figuras da disposição dos termómetros no interior das câmaras térmicas. Todas as figuras que aparecem ao longo do documento que não estão referenciadas são da adaptação ou elaboração própria do autor. A decisão de alargar o âmbito da acreditação do Laboratório de Metrologia da Frilabo para calibração de termómetros, prendeu-se com o facto de que sendo acreditado como laboratório de ensaios na área das temperaturas, a realização da rastreabilidade dos padrões de medida internamente, permitiria uma gestão de recursos otimizada e rentabilizada. A metodologia da preparação de todo o processo de acreditação do Laboratório de Metrologia da Frilabo, foi desenvolvida pelo autor e está expressa ao longo do texto da tese incluindo dados relevantes para a concretização da referida acreditação nos dois âmbitos. A avaliação de todo o trabalho desenvolvido será efetuada pelo o organismo designado IPAC (Instituto Português de Acreditação) que confere a acreditação em Portugal. Este organismo irá auditar a empresa com base nos procedimentos desenvolvidos e nos resultados obtidos, sendo destes o mais importante o Balanço da Melhor Incerteza (BMI) da medição também conhecido por Melhor Capacidade de Medição (MCM), quer para o ensaio às câmaras térmicas, quer para a calibração dos termómetros, permitindo desta forma complementar os serviços prestados aos clientes fidelizados à Frilabo. As câmaras térmicas e os termómetros industriais são equipamentos amplamente utilizados em diversos segmentos industriais, engenharia, medicina, ensino e também nas instituições de investigação, sendo um dos objetivos respetivamente, a simulação de condições específicas controladas e a medição de temperatura. Para entidades acreditadas, como os laboratórios, torna-se primordial que as medições realizadas com e nestes tipos de equipamentos ostentem confiabilidade metrológica1, uma vez que, resultados das medições inadequados podem levar a conclusões equivocadas sobre os testes realizados. Os resultados obtidos nos ensaios a câmaras térmicas e nas calibrações de termómetros, são considerados bons e aceitáveis, uma vez que as melhores incertezas obtidas, podem ser comparadas, através de consulta pública do Anexo Técnico do IPAC, com as incertezas de outros laboratórios acreditados em Portugal. Numa abordagem mais experimental, pode dizer-se que no ensaio a câmaras térmicas a obtenção de incertezas mais baixas ou mais altas depende maioritariamente do comportamento, características e estado de conservação das câmaras, tornando relevante o processo de estabilização da temperatura no interior das mesmas. A maioria das fontes de incerteza na calibração dos termómetros são obtidas pelas características e especificações do fabricante dos equipamentos, que se traduzem por uma contribuição com o mesmo peso para o cálculo da incerteza expandida (a exatidão de fabricante, as incertezas herdadas de certificados de calibração, da estabilidade e da uniformidade do meio térmico onde se efetuam as calibrações). Na calibração dos termómetros as incertezas mais baixas obtêm-se para termómetros de resoluções mais baixas. Verificou-se que os termómetros com resolução de 1ºC não detetavam as variações do banho térmico. Nos termómetros com resoluções inferiores, o peso da contribuição da dispersão de leituras no cálculo da incerteza, pode variar consoante as características do termómetro. Por exemplo os termómetros com resolução de 0,1ºC, apresentaram o maior peso na contribuição da componente da dispersão de leituras. Pode concluir-se que a acreditação de um laboratório é um processo que não é de todo fácil. Podem salientar-se aspetos que podem comprometer a acreditação, como por exemplo a má seleção do ou dos técnicos e equipamentos (má formação do técnico, equipamento que não seja por exemplo adequado à gama, mal calibrado, etc…) que vão efetuar as medições. Se não for bem feita, vai comprometer todo o processo nos passos seguintes. Deve haver também o envolvimento do todos os intervenientes do laboratório, o gestor da qualidade, o responsável técnico e os técnicos, só assim é que é possível chegar à qualidade pretendida e à melhoria contínua da acreditação do laboratório. Outro aspeto importante na preparação de uma acreditação de um laboratório é a pesquisa de documentação necessária e adequada para poder tomar decisões corretas na elaboração dos procedimentos conducentes à referida. O laboratório tem de mostrar/comprovar através de registos a sua competência. Finalmente pode dizer-se que competência é a palavra chave de uma acreditação, pois ela manifesta-se nas pessoas, equipamentos, métodos, instalações e outros aspetos da instituição a que pertence o laboratório sob acreditação.

Integrated micro fuel cells with on-board hydride reactors and autonomous control schemes

Miniaturization of power generators to the MEMS scale, based on the hydrogen-air fuel cell, is the object of this research. The micro fuel cell approach has been adopted for advantages of both high power and energy densities. On-board hydrogen production/storage and an efficient control scheme that facilitates integration with a fuel cell membrane electrode assembly (MEA) are key elements for micro energy conversion. Millimeter-scale reactors (ca. 10 µL) have been developed, for hydrogen production through hydrolysis of CaH2 and LiAlH4, to yield volumetric energy densities of the order of 200 Whr/L. Passive microfluidic control schemes have been implemented in order to facilitate delivery, self-regulation, and at the same time eliminate bulky auxiliaries that run on parasitic power. One technique uses surface tension to pump water in a microchannel for hydrolysis and is self-regulated, based on load, by back pressure from accumulated hydrogen acting on a gas-liquid microvalve. This control scheme improves uniformity of power delivery during long periods of lower power demand, with fast switching to mass transport regime on the order of seconds, thus providing peak power density of up to 391.85 W/L. Another method takes advantage of water recovery by backward transport through the MEA, of water vapor that is generated at the cathode half-cell reaction. This regulation-free scheme increases available reactor volume to yield energy density of 313 Whr/L, and provides peak power density of 104 W/L. Prototype devices have been tested for a range of duty periods from 2-24 hours, with multiple switching of power demand in order to establish operation across multiple regimes. Issues identified as critical to the realization of the integrated power MEMS include effects of water transport and byproduct hydrate swelling on hydrogen production in the micro reactor, and ambient relative humidity on fuel cell performance.

Biodiversidade e abundância da ictiofauna associada ao cultivo orgânico de Litopenaeus vannamei (Boone, 1931)

The expansion of shrimp farming has caused a series of environmental impacts, often as a result of lack of planning and adequate management. Organic aquaculture has emerged as an alternative to conventional shrimp farming, and differently, aims at the economical, ecological and farming potential of other organisms, such as fishes, oysters and seaweeds. The present study aimed at evaluating the biological diversity and abundance of the ichthyofauna associated to Litopenaeus vannamei organic culture at PRIMAR farm (Rio Grande do Norte, Brazil). The sampling period consisted of four culture cycles (1, 2, 3, and 4) accomplished in four grow-out ponds (V1, V7, V2, and V4) in 2005. The first two culture cycles were carried out during the rainy season, and the last two cycles, during the dry season. Environmental (temperature, salinity, transparency, and rainfall), biodiversity (diversity and uniformity and abundance indexes) of the ichthyofauna, and shrimp productivity data were collected throughout these four culture cycles. The results obtained for the environmental variables showed that both salinity and transparency oscillated in a significant way (p < 0.001) between culture cycles. In relation to the abundance of the ichthyofauna, fifty four species associated to the organic culture of Litopenaeus vannamei were collected and identified at PRIMAR. For the biodiversity criterion, larger species richness (S = 46) and uniformity (E = 0.59 ± 0.16) were observed during cycles 3 and 4 than in cycles 1 and 2 (S = 41 and E = 0.15 ± 0.12). A positive and significant correlation was obtained for the transparency with diversity and uniformity of fish species between cycles 1 and 2 (wet season) and cycles 3 and 4 (dry season) (p < 0.017 - Shannon Index; p < 0.008 - Pielou Index, respectively). A correlation could not be established between shrimp productivity and fish biomass. However, fish biomass decreased from cycles 1 and 2 to cycles 3 and 4, concomitant with an increase in shrimp productivity, most probably due to a higher (from 58.0% to 71.0%) shrimp survival. Regarding the culture potential of the ichthyofauna, three species (Mugil curema, Mugil liza and Chaetodipterus faber) were identified as potential farming alternatives, either singly or in consortium with Litopenaeus vannamei. A fourth species (Centropomus undecimalis) was indicated as an alternative for single culture or in consortium with other fish species. In conclusion, the large diversity of estuarine fishes associated to Litopenaeus vannamei farming observed at PRIMAR clearly indicated the ecological feasibility for organic aquaculture in northeastern Brazil

Lifestyle factors, adiposity and cardiometabolic risk factors in South Asian women living in Scotland

South Asians migrating to the Western world have a 3 to 5-fold higher risk of developing type 2 diabetes and double the risk of cardiovascular disease (CVD) than the background population of White European descent, without exhibiting a proportional higher prevalence of conventional cardiometabolic risk factors. Notably, women of South Asian descent are more likely to be diagnosed with type 2 diabetes as they grow older compared with South Asian men and, in addition, they have lost the cardio-protective effects of being females. Despite South Asian women in Western countries being a high risk group for developing future type 2 diabetes and CVD, they have been largely overlooked. The aims of this thesis were to compare lifestyle factors, body composition and cardiometabolic risk factors in healthy South Asian and European women who reside in Scotland, to examine whether ethnicity modifies the associations between modifiable environmental factors and cardiometabolic risks and to assess whether vascular reactivity is altered by ethnicity or other conventional and novel CVD risks. I conducted a cross-sectional study and recruited 92 women of South Asian and 87 women of White European descent without diagnosed diabetes or CVD. Women on hormone replacement therapy or hormonal contraceptives were excluded too. Age and body mass index (BMI) did not differ between the two ethnic groups. Physical activity was assessed and with self-reported questionnaires and objectively with the use of accelerometers. Cardiorespiratory fitness was quantified with the predicted maximal oxygen uptake (VO2 max) during a submaximal test (Chester step test). Body composition was assessed with skinfolds measured at seven body sites, five body circumferences, measurement of abdominal subcutaneous (SAT) and visceral adipose tissue (VAT) with the use of magnetic resonance imaging (MRI) and liver fat with the use MR spectroscopy. Dietary density was assessed with food frequency questionnaires. Vascular response was assessed by measuring the response to acetylcholine and sodium nitroprusside with the use of Laser Doppler Imaging with Iontophoresis (LDI-ION) and the response to shear stress with the use of Peripheral Arterial Tonometry (EndoPAT). The South Asian women exhibited a metabolic profile consistent with the insulin resistant phenotype, characterised by greater levels of fasting insulin, lower levels of high density lipoprotein (HDL) and higher levels of triglycerides (TG) compared with their European counterparts. In addition, the South Asians had greater levels of glycated haemoglobin (HbA1c) for any given level of fasting glucose. The South Asian women engaged less time weekly with moderate to vigorous physical activity (MVPA) and had lower levels of cardiorespiratory fitness for any given level of physical activity than the women of White descent. In addition, they accumulated more fat centrally for any given BMI. Notably, the South Asians had equivalent SAT with the European women but greater VAT and hepatic fat for any given BMI. Dietary density did not differ among the groups. Increasing central adiposity had the largest effect on insulin resistance in both ethic groups compared with physical inactivity or decreased cardiorespiratory fitness. Interestingly, ethnicity modified the association between central adiposity and insulin resistance index with a similar increase in central adiposity having a substantially larger effect on insulin resistance index in the South Asian women than in the Europeans. I subsequently examined whether ethnic specific thresholds are required for lifestyle modifications and demonstrated that South Asian women need to engage with MVPA for around 195 min.week-1 in order to equate their cardiometabolic risk with that of the Europeans exercising 150 min.week-1. In addition, lower thresholds of abdominal adiposity and BMI should apply for the South Asians compared with the conventional thresholds. Although the South Asians displayed an adverse metabolic profile, vascular reactivity measured with both methods did not differ among the two groups. An additional finding was that menopausal women with hot flushing of both ethnic groups showed a paradoxical vascular profile with enhanced skin perfusion (measured with LDI-ION) but decreased reactive hyperaemia index (measured with EndoPAT) compared with asymptomatic menopausal women. The latter association was independent of conventional CVD risk factors. To conclude, South Asian women without overt disease who live in Scotland display an adverse metabolic profile with steeper associations between lifestyle risk factors and adverse cardiometabolic outcomes compared with their White counterparts. Further work in exploring ethnic specific thresholds in lifestyle interventions or in disease diagnosis is warranted.

Radiogenic isotopes in the Mediterranean Sea: water mass exchange and precessional variability during the Messinian

During the late Miocene, exchange between the Mediterranean Sea and Atlantic Ocean changed dramatically, culminating in the Messinian Salinity Crisis (MSC). Understanding Mediterranean-Atlantic exchange at that time could answer the enigmatic question of how so much salt built up within the Mediterranean, while furthering the development of a framework for future studies attempting to understand how changes may have impacted global thermohaline circulation. Due to their association with specific water masses at different scales, radiogenic Sr, Pb, and Nd isotope records were generated from various archives contained within marine deposits to endeavour to understand better late Miocene Mediterranean-Atlantic exchange. The archives used include foraminiferal calcite (Sr), fish teeth and bone (Nd), dispersed authigenic ferromanganese oxyhydroxides (Nd, Pb), and a ferromanganese crust (Pb). The primary focus is on sediments preserved at one end of the Betic corridor, a gateway that once connected the Mediterranean to the Atlantic through southern Spain, although other locations are investigated. The Betic gateway terminated within several marginal sub-basins before entering the Western Mediterranean; one of these is the Sorbas Basin, a well-studied location whose sediments have been astronomically tuned at high temporal resolution, providing the necessary age control for sub-precessional resolution records. Since the climatic history of the Mediterranean is strongly controlled by precessional changes in regional climate, the aim was to produce records at high (sub-precessional) temporal resolution, to be able to observe clearly any precessional cyclicity driven by regional climate which could be superimposed over longer trends. This goal was achieved for all records except the ferromanganese crust record. The 87Sr/86Sr isotope record (Ch. 3) shows precessional frequency excursions away from the global seawater curve. As precessional frequency oscillations are unexpected for this setting, a numerical box model was used to determine the mechanisms causing the excursions. To enable parameterisation of model variables, regional Sr characteristics, data from general circulation model HadCM3L, and new benthic foraminiferal assemblage data are employed. The model results imply that the Sorbas Basin likely had a positive hydrologic budget in the late Miocene, very different to that of today. Moreover, the model indicates that the mechanism controlling the Sr isotope ratio of Sorbas Basin seawater was not restriction, but a lack of density-driven exchange with the Mediterranean. Beyond improving our understanding of how marginal Mediterranean sub-basins may evolve different isotope signatures, these results have implications for astronomical tuning and stratigraphy in the region, findings which are crucial considering the geological and climatic history of the late Miocene Mediterranean is based entirely on marginal deposits. An improved estimate for the Nd isotope signature of late Miocene Mediterranean Outflow (MO) was determined by comparing Nd isotope signatures preserved in the deeper Alborán Sea at ODP Site 978 with literature data as well as the signature preserved in the Sorbas Basin (Ch. 4; -9.34 to -9.92 ± 0.37 εNd(t)). It was also inferred that it is unlikely that Nd isotopes can be used reliably to track changes in circulation within the shallow settings characteristic of the Mediterranean-Atlantic connections; this is significant in light of a recent publication documenting corridor closure using Nd isotopes. Both conclusions will prove useful for future studies attempting to understand changes in Mediterranean-Atlantic exchange. Excursions to high values, with precessional frequency, are also observed in the radiogenic Pb isotope record for the Sorbas Basin (Ch. 5). Widening the scope to include locations further away from the gateways, records were produced for late Miocene sections on Sicily and Northern Italy, and similar precessional frequency cyclicity was observed in the Pb isotope records for these sites as well. Comparing these records to proxies for Saharan dust and available whole rock data indicates that, while further analysis is necessary to draw strong conclusions, enhanced dust production during insolation minima may be driving the observed signal. These records also have implications for astronomical tuning; peaks in Pb isotope records driven by Saharan dust may be easier to connect directly to the insolation cycle, providing improved astronomical tuning points. Finally, a Pb isotope record derived using in-situ laser ablation performed on ferromanganese crust 3514-6 from the Lion Seamount, located west of Gibraltar within the MO plume, has provided evidence that plume depth shifted during the Pliocene. The record also suggests that Pb isotopes may not be a suitable proxy for changes in late Miocene Mediterranean-Atlantic exchange, since the Pb isotope signatures of regional water masses are too similar. To develop this record, the first published instance of laser ablation derived 230Thexcess measurements are combined with 10Be dating.

Estratificação do carcinoma do colo do útero pré e pós-terapêutica - uma perspectiva global

O carcinoma do colo do útero é um dos tumores malignos mais frequentes a nível mundial. Para garantir a uniformização de critérios entre países com diferentes recursos, o estadiamento deste tumor permanece clínico, segundo as orientações da Federação Internacional de Ginecologia e Obstetrícia, e tem por principal objectivo a identificação das doentes que são candidatas à cirurgia. A avaliação radiológica é amplamente recomendada, quando disponível, com o objectivo de aumentar a acuidade do diagnóstico, assegurando a optimização terapêutica, sendo também recomendada no seguimento. Importa, assim, que o radiologista tenha presente não só o protocolo técnico adequado na suspeita de carcinoma do colo do útero e o respectivo espectro de apresentação radiológica, mas também algumas características da própria doença e possíveis abordagens terapêuticas, de forma a incluir no seu relatório toda a informação relevante. A ressonância magnética permanece o principal pilar na avaliação radiológica destas doentes, embora recentemente o papel da tomografia computorizada por emissão de positrões tenha vindo a ganhar relevo, sobretudo no que respeita à avaliação ganglionar e ao despiste de recidiva. Neste artigo as autoras dão uma perspectiva aprofundada da avaliação radiológica do carcinoma do colo do útero, deste o diagnóstico ao seguimento pós-terapêutico, à luz dos estudos mais recentes.

Desenvolvimento de um sistema de nitretação por plasma em fonte pulsada e sua influencia sobre a nitretação do titânio

The pulsed plasma nitriding is a solution currently used in the metallurgical industry to resolve problems earlier in the processing of parts by using plasma DC voltage. These problems consisted mainly of edge effect and opening arches caused due to non-uniformity of electric fields on uneven surfaces. By varying the pulse width can reduce these effects. However, variations in pulse width can drastically affect the population of the plasma species and hence the final microstructure of the nitrided layer. In literature, little is known about the effect of process parameters on the properties of the plasma species and, consequently, the surface properties. We have developed a system of nitriding with pulsed source with fixed period of 800  pulse width is variable. Examined the variation of these parameters on the properties of nitrided surface when keeping constant temperature, gas composition, flow, pressure and power. It was found that the values of width and pulse repetition time of considerable influence in the intensities of the species present in plasma. Moreover, we observed the existence of the edge effect for some values of pulse widths, as well as changes in surface roughness and hardness

Remoção de metais pesados em efluentes sintéticos utilizando vermiculita como adsorvente

Heavy metals are used in many industrial processestheirs discard can harm fel effects to the environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the adsorption capacity of vermiculite as adsorbent for the heavy metals removal in a synthetic solution. The mineral vermiculite was characterized by differents techniques: specific surface area analysis by BET method, X-ray diffraction, raiosX fluorescence, spectroscopy in the infraredd region of, laser particle size analysis and specific gravity. The physical characteristics of the material presented was appropriate for the study of adsorption. The adsorption experiments weredriveal finite bath metod in synthetic solutions of copper, nickel, cadmium, lead and zinc. The results showed that the vermiculite has a high potential for adsorption, removing about 100% of ions and with removal capacity values about 85 ppm of metal in solution, 8.09 mg / g for cadmium, 8.39 mg/g for copper, 8.40 mg/g for lead, 8.26 mg/g for zinc and 8.38 mg/g of nickel. The experimental data fit in the Langmuir and Freundlich models. The kinetic datas showed a good correlation with the pseudo-second order model. It was conducteas a competition study among the metals using vermiculiti a adsorbent. Results showed that the presence of various metals in solution does not influence their removal at low concentrations, removing approximat wasely 100 % of all metals present in solutions