Territorial innovation, social ventures and local development: An exploratory case study

Social innovation is recognized as an important driver of growth and social value creation. Social innovative strategies are often pursued at the local level, by (social) organizations which have a more comprehensive knowledge of the complex social problems that a specific community is facing. The objective of the present study is to analyse the extent to which innovative social ventures are able to contribute to local development. By means of a qualitative approach, based on the case study method, we attempt to illustrate the innovative strategies conceived on the ground by a social venture specifically created to foster the local development of its inhabitants. The results shows that social innovation is a viable strategy to revitalize the economic growth of a region, through the creation of local employment on the basis of village’s traditional activities that are redefined in a new and competitive way. However, to be successful the strategy demands the deep knowledge of existing social problems as well as the availability of endogenous local resources and capabilities that could be used by social entrepreneurs. Therefore, social innovation ensures that local development and social cohesion are achieved in a sustainable way, at the same time that cultural and environmental heritage are also preserved.

Objectives for management of socio-ecological systems in the Great Barrier Reef region, Australia

A wide range of goals and objectives have to be taken into account in natural resources management. Defining these objectives in operational terms, including dimensions such as sustainability, productivity, and equity, is by no means easy, especially if they must capture the diversity of community and stakeholder values. This is especially true in the coastal zone where land activities affect regional marine ecosystems. In this study, the aim was firstly to identify and hierarchically organise the goals and objectives for coastal systems, as defined by local stakeholders. Two case study areas are used within the Great Barrier Reef region being Mackay and Bowen–Burdekin. Secondly, the aim was to identify similarities between the case study results and thus develop a generic set of goals to be used as a starting point in other coastal communities. Results show that overarching high-level goals have nested sub-goals that contain a set of more detailed regional objectives. The similarities in high-level environmental, governance, and socio-economic goals suggest that regionally specific objectives can be developed based on a generic set of goals. The prominence of governance objectives reflects local stakeholder perceptions that current coastal zone management is not achieving the outcomes they feel important and that there is a need for increased community engagement and co-management. More importantly, it raises the question of how to make issues relevant for the local community and entice participation in the local management of public resources to achieve sustainable environmental, social, and economic management outcomes. © 2015 Springer-Verlag Berlin Heidelberg

AIR SIDE HEAT TRANSFER ENHANCEMENT IN HEAT EXCHANGERS UTILIZING INNOVATIVE DESIGNS AND THE ADDITIVE MANUFACTURING TECHNIQUE

Over the last decade, rapid development of additive manufacturing techniques has allowed the fabrication of innovative and complex designs. One field that can benefit from such technology is heat exchanger fabrication, as heat exchanger design has become more and more complex due to the demand for higher performance particularly on the air side of the heat exchanger. By employing the additive manufacturing, a heat exchanger design was successfully realized, which otherwise would have been very difficult to fabricate using conventional fabrication technologies. In this dissertation, additive manufacturing technique was implemented to fabricate an advanced design which focused on a combination of heat transfer surface and fluid distribution system. Although the application selected in this dissertation is focused on power plant dry cooling applications, the results of this study can directly and indirectly benefit other sectors as well, as the air-side is often the limiting side for in liquid or single phase cooling applications. Two heat exchanger designs were studied. One was an advanced metallic heat exchanger based on manifold-microchannel technology and the other was a polymer heat exchanger based on utilization of prime surface technology. Polymer heat exchangers offer several advantages over metals such as antifouling, anticorrosion, lightweight and often less expensive than comparable metallic heat exchangers. A numerical modeling and optimization were performed to calculate a design that yield an optimum performance. The optimization results show that significant performance enhancement is noted compared to the conventional heat exchangers like wavy fins and plain plate fins. Thereafter, both heat exchangers were scaled down and fabricated using additive manufacturing and experimentally tested. The manifold-micro channel design demonstrated that despite some fabrication inaccuracies, compared to a conventional wavy-fin surface, 15% - 50% increase in heat transfer coefficient was possible for the same pressure drop value. In addition, if the fabrication inaccuracy can be eliminated, an even larger performance enhancement is predicted. Since metal based additive manufacturing is still in the developmental stage, it is anticipated that with further refinement of the manufacturing process in future designs, the fabrication accuracy can be improved. For the polymer heat exchanger, by fabricating a very thin wall heat exchanger (150μm), the wall thermal resistance, which usually becomes the limiting side for polymer heat exchanger, was calculated to account for only up to 3% of the total thermal resistance. A comparison of air-side heat transfer coefficient of the polymer heat exchanger with some of the commercially available plain plate fin surface heat exchangers show that polymer heat exchanger performance is equal or superior to plain plate fin surfaces. This shows the promising potential for polymer heat exchangers to compete with conventional metallic heat exchangers when an additive manufacturing-enabled fabrication is utilized. Major contributions of this study are as follows: (1) For the first time demonstrated the potential of additive manufacturing in metal printing of heat exchangers that benefit from a sophisticated design to yield a performance substantially above the respective conventional systems. Such heat exchangers cannot be fabricated with the conventional fabrication techniques. (2) For the first time demonstrated the potential of additive manufacturing to produce polymer heat exchangers that by design minimize the role of thermal conductivity and deliver a thermal performance equal or better that their respective metallic heat exchangers. In addition of other advantages of polymer over metal like antifouling, anticorrosion, and lightweight. Details of the work are documented in respective chapters of this thesis.

Adaptability, Transformation and Complex Changes in Namibia and Tanzania: Resilience and Innovation System Development in Local Communities

This thesis is a research about the recent complex spatial changes in Namibia and Tanzania and local communities’ capacity to cope with, adapt to and transform the unpredictability engaged to these processes. I scrutinise the concept of resilience and its potential application to explaining the development of local communities in Southern Africa when facing various social, economic and environmental changes. My research is based on three distinct but overlapping research questions: what are the main spatial changes and their impact on the study areas in Namibia and Tanzania? What are the adaptation, transformation and resilience processes of the studied local communities in Namibia and Tanzania? How are innovation systems developed, and what is their impact on the resilience of the studied local communities in Namibia and Tanzania? I use four ethnographic case studies concerning environmental change, global tourism and innovation system development in Namibia and Tanzania, as well as mixed-methodological approaches, to study these issues. The results of my empirical investigation demonstrate that the spatial changes in the localities within Namibia and Tanzania are unique, loose assemblages, a result of the complex, multisided, relational and evolutional development of human and non-human elements that do not necessarily have linear causalities. Several changes co-exist and are interconnected though uncertain and unstructured and, together with the multiple stressors related to poverty, have made communities more vulnerable to different changes. The communities’ adaptation and transformation measures have been mostly reactive, based on contingency and post hoc learning. Despite various anticipation techniques, coping measures, adaptive learning and self-organisation processes occurring in the localities, the local communities are constrained by their uneven power relationships within the larger assemblages. Thus, communities’ own opportunities to increase their resilience are limited without changing the relations in these multiform entities. Therefore, larger cooperation models are needed, like an innovation system, based on the interactions of different actors to foster cooperation, which require collaboration among and input from a diverse set of stakeholders to combine different sources of knowledge, innovation and learning. Accordingly, both Namibia and Tanzania are developing an innovation system as their key policy to foster transformation towards knowledge-based societies. Finally, the development of an innovation system needs novel bottom-up approaches to increase the resilience of local communities and embed it into local communities. Therefore, innovation policies in Namibia have emphasised the role of indigenous knowledge, and Tanzania has established the Living Lab network.

'Artificial Immune Systems Tutorial'

The biological immune system is a robust, complex, adaptive system that defends the body from foreign pathogens. It is able to categorize all cells (or molecules) within the body as self-cells or non-self cells. It does this with the help of a distributed task force that has the intelligence to take action from a local and also a global perspective using its network of chemical messengers for communication. There are two major branches of the immune system. The innate immune system is an unchanging mechanism that detects and destroys certain invading organisms, whilst the adaptive immune system responds to previously unknown foreign cells and builds a response to them that can remain in the body over a long period of time. This remarkable information processing biological system has caught the attention of computer science in recent years. A novel computational intelligence technique, inspired by immunology, has emerged, called Artificial Immune Systems. Several concepts from the immune have been extracted and applied for solution to real world science and engineering problems. In this tutorial, we briefly describe the immune system metaphors that are relevant to existing Artificial Immune Systems methods. We will then show illustrative real-world problems suitable for Artificial Immune Systems and give a step-by-step algorithm walkthrough for one such problem. A comparison of the Artificial Immune Systems to other well-known algorithms, areas for future work, tips & tricks and a list of resources will round this tutorial off. It should be noted that as Artificial Immune Systems is still a young and evolving field, there is not yet a fixed algorithm template and hence actual implementations might differ somewhat from time to time and from those examples given here.

Design investigation of the Lake Calumet Complex: improving water quality to regenerate local industrial, community, and ecosystem resources

This design thesis is an inquiry of the highly industrialized urban landscape of the Lake Calumet Complex on the South Side of the City of Chicago. It examines geologic and anthropogenic strata within this region as waste used for staging various social, industrial, and ecological systems. Today, these social, industrial, and ecological systems are not responsive to each other and certainly do not possess resilient attributes that would allow them to interact within the landscape in perpetuity. The resulting design strategy seeks to re-think the treatment of waste in the landscape into a new framework for future park design. This park will serve as grounds to interweave these complex systems in order to rehabilitate ecosystem functions and improve water quality. Additionally the park hybridizes many social and ecological functions to improve community recreational opportunities and gain public acceptance and appeal.

Seasonal changes of heat and moisture fluxes from the Caspian Sea surface and its effect on synoptic systems with heavy rainfalls in southern shores of the sea during 2005-2010

Caspian Sea with its unique characteristics is a significant source to supply required heat and moisture for passing weather systems over the north of Iran. Investigation of heat and moisture fluxes in the region and their effects on these systems that could lead to floods and major financial and human losses is essential in weather forecasting. Nowadays by improvement of numerical weather and climate prediction models and the increasing need to more accurate forecasting of heavy rainfall, the evaluation and verification of these models has been become much more important. In this study we have used the WRF model as a research-practical one with many valuable characteristics and flexibilities. In this research, the effects of heat and moisture fluxes of Caspian Sea on the synoptic and dynamical structure of 20 selective systems associated with heavy rainfall in the southern shores of Caspian Sea are investigated. These systems are selected based on the rainfall data gathered by three local stations named: Rasht, Babolsar and Gorgan in different seasons during a five-year period (2005-2010) with maximum amount of rainfall through the 24 hours of a day. In addition to synoptic analyses of these systems, the WRF model with and without surface flues was run using the two nested grids with the horizontal resolutions of 12 and 36 km. The results show that there are good consistencies between the predicted distribution of rainfall field, time of beginning and end of rainfall by the model and the observations. But the model underestimates the amounts of rainfall and the maximum difference with the observation is about 69%. Also, no significant changes in the results are seen when the domain and the resolution of computations are changed. The other noticeable point is that the systems are severely weakened by removing heat and moisture fluxes and thereby the amounts of large scale rainfall are decreased up to 77% and the convective rainfalls tend to zero.

Cogestion des ressources naturelles : une approche structurale pour quantifier la contribution des réseaux d'acteurs à la résilience des systèmes socio-écologiques

Alors que les activités anthropiques font basculer de nombreux écosystèmes vers des régimes fonctionnels différents, la résilience des systèmes socio-écologiques devient un problème pressant. Des acteurs locaux, impliqués dans une grande diversité de groupes — allant d’initiatives locales et indépendantes à de grandes institutions formelles — peuvent agir sur ces questions en collaborant au développement, à la promotion ou à l’implantation de pratiques plus en accord avec ce que l’environnement peut fournir. De ces collaborations répétées émergent des réseaux complexes, et il a été montré que la topologie de ces réseaux peut améliorer la résilience des systèmes socio-écologiques (SSÉ) auxquels ils participent. La topologie des réseaux d’acteurs favorisant la résilience de leur SSÉ est caractérisée par une combinaison de plusieurs facteurs : la structure doit être modulaire afin d’aider les différents groupes à développer et proposer des solutions à la fois plus innovantes (en réduisant l’homogénéisation du réseau), et plus proches de leurs intérêts propres ; elle doit être bien connectée et facilement synchronisable afin de faciliter les consensus, d’augmenter le capital social, ainsi que la capacité d’apprentissage ; enfin, elle doit être robuste, afin d’éviter que les deux premières caractéristiques ne souffrent du retrait volontaire ou de la mise à l’écart de certains acteurs. Ces caractéristiques, qui sont relativement intuitives à la fois conceptuellement et dans leur application mathématique, sont souvent employées séparément pour analyser les qualités structurales de réseaux d’acteurs empiriques. Cependant, certaines sont, par nature, incompatibles entre elles. Par exemple, le degré de modularité d’un réseau ne peut pas augmenter au même rythme que sa connectivité, et cette dernière ne peut pas être améliorée tout en améliorant sa robustesse. Cet obstacle rend difficile la création d’une mesure globale, car le niveau auquel le réseau des acteurs contribue à améliorer la résilience du SSÉ ne peut pas être la simple addition des caractéristiques citées, mais plutôt le résultat d’un compromis subtil entre celles-ci. Le travail présenté ici a pour objectifs (1), d’explorer les compromis entre ces caractéristiques ; (2) de proposer une mesure du degré auquel un réseau empirique d’acteurs contribue à la résilience de son SSÉ ; et (3) d’analyser un réseau empirique à la lumière, entre autres, de ces qualités structurales. Cette thèse s’articule autour d’une introduction et de quatre chapitres numérotés de 2 à 5. Le chapitre 2 est une revue de la littérature sur la résilience des SSÉ. Il identifie une série de caractéristiques structurales (ainsi que les mesures de réseaux qui leur correspondent) liées à l’amélioration de la résilience dans les SSÉ. Le chapitre 3 est une étude de cas sur la péninsule d’Eyre, une région rurale d’Australie-Méridionale où l’occupation du sol, ainsi que les changements climatiques, contribuent à l’érosion de la biodiversité. Pour cette étude de cas, des travaux de terrain ont été effectués en 2010 et 2011 durant lesquels une série d’entrevues a permis de créer une liste des acteurs de la cogestion de la biodiversité sur la péninsule. Les données collectées ont été utilisées pour le développement d’un questionnaire en ligne permettant de documenter les interactions entre ces acteurs. Ces deux étapes ont permis la reconstitution d’un réseau pondéré et dirigé de 129 acteurs individuels et 1180 relations. Le chapitre 4 décrit une méthodologie pour mesurer le degré auquel un réseau d’acteurs participe à la résilience du SSÉ dans lequel il est inclus. La méthode s’articule en deux étapes : premièrement, un algorithme d’optimisation (recuit simulé) est utilisé pour fabriquer un archétype semi-aléatoire correspondant à un compromis entre des niveaux élevés de modularité, de connectivité et de robustesse. Deuxièmement, un réseau empirique (comme celui de la péninsule d’Eyre) est comparé au réseau archétypique par le biais d’une mesure de distance structurelle. Plus la distance est courte, et plus le réseau empirique est proche de sa configuration optimale. La cinquième et dernier chapitre est une amélioration de l’algorithme de recuit simulé utilisé dans le chapitre 4. Comme il est d’usage pour ce genre d’algorithmes, le recuit simulé utilisé projetait les dimensions du problème multiobjectif dans une seule dimension (sous la forme d’une moyenne pondérée). Si cette technique donne de très bons résultats ponctuellement, elle n’autorise la production que d’une seule solution parmi la multitude de compromis possibles entre les différents objectifs. Afin de mieux explorer ces compromis, nous proposons un algorithme de recuit simulé multiobjectifs qui, plutôt que d’optimiser une seule solution, optimise une surface multidimensionnelle de solutions. Cette étude, qui se concentre sur la partie sociale des systèmes socio-écologiques, améliore notre compréhension des structures actorielles qui contribuent à la résilience des SSÉ. Elle montre que si certaines caractéristiques profitables à la résilience sont incompatibles (modularité et connectivité, ou — dans une moindre mesure — connectivité et robustesse), d’autres sont plus facilement conciliables (connectivité et synchronisabilité, ou — dans une moindre mesure — modularité et robustesse). Elle fournit également une méthode intuitive pour mesurer quantitativement des réseaux d’acteurs empiriques, et ouvre ainsi la voie vers, par exemple, des comparaisons d’études de cas, ou des suivis — dans le temps — de réseaux d’acteurs. De plus, cette thèse inclut une étude de cas qui fait la lumière sur l’importance de certains groupes institutionnels pour la coordination des collaborations et des échanges de connaissances entre des acteurs aux intérêts potentiellement divergents.

Examining barriers to internationalisation created by diverse systems and structures in vocational education and training

In a global society, all educational sectors need to recognise internationalism as a core, foundational principle. Whilst most educational sectors are taking up that challenge, vocational education and training (VET) is still being pulled towards the national agenda in terms of its structures and systems, and the policies driving it, disadvantaging those who graduate from VET, those who teach in it, and the businesses and countries that connect with it. This paper poses questions about the future of internationalisation in the sector. It examines whether there is a way to create a VET system that meets its primary point of value, to produce skilled workers for the local labour market, while still benefitting those graduates by providing international skills and knowledge, gained from VET institutions that are international in their outlook. The paper examines some of the key barriers created by systems and structures in VET to internationalisation and suggests that the efforts which have been made to address the problem have had limited success. It suggests that only a model which gives freedom to those with a direct vested interest, students, teachers, trainers and employers, to pursue international co-operation and liaison will have the opportunity to succeed. (DIPF/Orig.)

Micro and nanosystems for delivering local anesthetics

Introduction: One of the most common strategies for pain control during and after surgical procedures is the use of local anesthetics. Prolonged analgesia can be safely achieved with drug delivery systems suitably chosen for each local anesthetic agent.Areas covered: This review considers drug delivery formulations of local anesthetics designed to prolong the anesthetic effect and decrease toxicity. The topics comprise the main drug delivery carrier systems (liposomes, biopolymers, and cyclodextrins) for infiltrative administration of local anesthetics. A chronological review of the literature is presented, including details of formulations as well as the advantages and pitfalls of each carrier system. The review also highlights pharmacokinetic data on such formulations, and gives an overview of the clinical studies published so far concerning pain control in medicine and dentistry.Expert opinion: The design of novel drug delivery systems for local anesthetics must focus on how to achieve higher uploads of the anesthetic into the carrier, and how to sustain its release. This comprehensive review should be useful to provide the reader with the current state-of-art regarding drug delivery formulations for local anesthetics and their possible clinical applications.

Encapsulation of Local Anesthetic Bupivacaine in Biodegradable Poly(DL-lactide-co-glycolide) Nanospheres: Factorial Design, Characterization and Cytotoxicity Studies

Local anesthetic agents cause temporary blockade of nerve impulses productiong insensitivity to painful stimuli in the area supplied by that nerve. Bupivacaine (BVC) is an amide-type local anesthetic widely used in surgery and obstetrics for sustained peripheral and central nerve blockade. in this study, we prepared and characterized nanosphere formulations containing BVC. To achieve these goals, BVC loaded poly(DL-lactide-co-glycolide) (PLGA) nanospheres (NS) were prepared by nanopreciptation and characterized with regard to size distribution, drug loading and cytotoxicity assays. The 2(3-1) factorial experimental design was used to study the influence of three different independent variables on nanoparticle drug loading. BVC was assayed by HPLC, the particle size and zeta potential were determined by dynamic light scattering. BVC was determined using a combined ultrafiltration-centrifugation technique. The results of optimized formulations showed a narrow size distribution with a polydispersivity of 0.05%, an average diameter of 236.7 +/- 2.6 nm and the zeta potential -2.93 +/- 1,10 mV. In toxicity studies with fibroblast 3T3 cells, BVC loaded-PLGA-NS increased cell viability, in comparison with the effect produced by free BVC. In this way, BVC-loaded PLGA-NS decreased BVC toxicity. The development of BVC formulations in carriers such as nanospheres could offer the possibility of controlling drug delivery in biological systems, prolonging the anesthetic effect and reducing toxicity.

A Hardware Implementation of a Run-Time Scheduler for Reconfigurable Systems

New generation embedded systems demand high performance, efficiency and flexibility. Reconfigurable hardware can provide all these features. However the costly reconfiguration process and the lack of management support have prevented a broader use of these resources. To solve these issues we have developed a scheduler that deals with task-graphs at run-time, steering its execution in the reconfigurable resources while carrying out both prefetch and replacement techniques that cooperate to hide most of the reconfiguration delays. In our scheduling environment task-graphs are analyzed at design-time to extract useful information. This information is used at run-time to obtain near-optimal schedules, escaping from local-optimum decisions, while only carrying out simple computations. Moreover, we have developed a hardware implementation of the scheduler that applies all the optimization techniques while introducing a delay of only a few clock cycles. In the experiments our scheduler clearly outperforms conventional run-time schedulers based on As-Soon-As-Possible techniques. In addition, our replacement policy, specially designed for reconfigurable systems, achieves almost optimal results both regarding reuse and performance.

Mathematical analysis of maximum power generated by photovoltaic systems and fitting curves for standard test conditions

The rural electrification is characterized by geographical dispersion of the population, low consumption, high investment by consumers and high cost. Moreover, solar radiation constitutes an inexhaustible source of energy and in its conversion into electricity photovoltaic panels are used. In this study, equations were adjusted to field conditions presented by the manufacturer for current and power of small photovoltaic systems. The mathematical analysis was performed on the photovoltaic rural system I- 100 from ISOFOTON, with power 300 Wp, located at the Experimental Farm Lageado of FCA/UNESP. For the development of such equations, the circuitry of photovoltaic cells has been studied to apply iterative numerical methods for the determination of electrical parameters and possible errors in the appropriate equations in the literature to reality. Therefore, a simulation of a photovoltaic panel was proposed through mathematical equations that were adjusted according to the data of local radiation. The results have presented equations that provide real answers to the user and may assist in the design of these systems, once calculated that the maximum power limit ensures a supply of energy generated. This real sizing helps establishing the possible applications of solar energy to the rural producer and informing the real possibilities of generating electricity from the sun.

CLIMATE CHANGE ADAPTATION IN VULNERABLE CROP AND LIVESTOCK PRODUCTION SYSTEMS IN MGETA, TANZANIA

Increased occurrence of drought and dry spells during the growing season have resulted in increased interest in protection of tropical water catchment areas. In Mgeta, a water catchment area in the Uluguru Mountains in Tanzania, water used for vegetable and fruit production is provided through canals from the Uluguru South Forest Reserve. The clearing of forest land for cultivation in the steep slopes in the area is causing severe land degradation, which is threatening the water catchment area, livelihoods, and food security of the local communities, as well as the major population centers in the lowlands. In this paper, the economic performance of a traditional cropping-livestock system with East African (EA)-goats and pigs and extensive vegetable production is compared with a more sustainable and environmentally friendly crop-dairy goat production system. A linear programming (LP) crop-livestock model, maximizing farm income considering the environmental constraints in the area was applied for studying the economic performance of dairy goats in the production system. The model was worked out for the rainy and dry seasons and the analysis was conducted for a basic scenario representing the current situation, based on the variability in the 30 years period from 1982-2012, and in a scenario of both lower crop yields and increased crop variability due to climate change. Data obtained from a sample of 60 farmers that were interviewed using a questionnaire was used to develop and parameterize the model. The study found that in the steep slopes of the area, a crop-dairy goat system with extensive use of grass and multipurpose trees (MPTs) would do better than the traditional vegetable gardening with the EA goat production system. The crop-dairy goat system was superior both in the basic and in a climate change scenario since the yield variation of the grass and MPTs system was less affected compared to vegetable crops due to more tree cover and the use of perennial grasses. However, the goat milk production in the area was constrained by inadequate feeding and lack of an appropriate breeding program. Hence, farmers should enhance goat milk production by supplementing with more concentrate feed and by implementing goat-breeding principles. Moreover, policy measures to promote such a development are briefly discussed.

Comunicación audio visual y creatividad como recurso para producir nuevas formas de periodismo cultural local: estudio de caso, la tradición artesanal en el cantón Cuenca

No existe en Cuenca un proyecto de investigación periodística y de producción audiovisual que indague, recopile y presente información sobre aquellas profesiones tradicionales heredadas a través del tiempo y que poco a poco se van perdiendo con miras a extinguirse completamente. Este proyecto, de cierta manera, puede ser innovador, ya que involucra dos áreas: comunicación audiovisual y redacción dentro del periodismo. Se involucran por el hecho de presentar información relevante, a través de un producto final, visual y escrito, que enseñe de quéforma estas profesiones son desarrolladas por diferentes actores humanos, sus contextos y sus procesos, con la intención de servir de apoyo investigativo cultural en el ámbito local y nacional.