Influence of a prudent diet on circulating cathepsin S in humans

BACKGROUND: Increased circulating cathepsin S levels have been linked to increased risk of cardiometabolic diseases and cancer. However, whether cathepsin S is a modifiable risk factor is unclear. We aimed to investigate the effects of a prudent diet on plasma cathepsin S levels in healthy individuals. FINDINGS: Explorative analyses of a randomized study were performed in 88 normal to slightly overweight and hyperlipidemic men and women (aged 25 to 65) that were randomly assigned to ad libitum prudent diet, i.e. healthy Nordic diet (ND) or a control group (habitual Western diet) for 6 weeks. Whereas all foods in the ND were provided, the control group was advised to consume their habitual diet throughout the study. The ND was in line with dietary recommendations, e.g. low in saturated fats, sugars and salt, but high in plant-based foods rich in fibre and unsaturated fats.The ND significantly decreased cathepsin S levels (from 20.1 (+/-4.0 SD) to 19.7 μg/L (+/-4.3 SD)) compared with control group (from 18.2 (+/-2.9 SD) to 19.1 μg/L (+/-3.8 SD)). This difference remained after adjusting for sex and change in insulin sensitivity (P = 0.03), and near significant after adjusting for baseline cathepsin S levels (P = 0.06), but not for change in weight or LDL-C. Changes in cathepsin S levels were directly correlated with change in LDL-C. CONCLUSIONS: Compared with a habitual control diet, a provided ad libitum healthy Nordic diet decreased cathepsin S levels in healthy individuals, possibly mediated by weight loss or lowered LDL-C. These differences between groups in cathepsin S were however not robust and therefore need further investigation.

Middle permian (Guadalupian) brachiopods from the Xiujimqinqi area, Inner Mongolia, northeast China, and their palaeobiogeographical and palaeogeographical significance

A small brachiopod fauna is described from the lower part of the Xiujimqinqi Formation of the Xiujimqinqi area in central-east Inner Mongolia, northeast China. The age of this fauna is regarded as Wordian (Middle Guadalupian, Middle Permian) by comparison with a similar brachiopod fauna from the Zhesi area of central Inner Mongolia, and by constraints from fusulinaceans associated with the Zhesi fauna. The Xiujimqinqi fauna is typical of mixed Boreal/Palaeoequatorial Middle Permian brachiopod faunas of East Asia. The mixed nature of these faunas is interpreted to have resulted from the combined effects of a middle palaeolatitudinal position, intensified plate convergence between Sino-Korea and Mongolia, and sea surface current connections with both the Arctic Sea in the north and eastern Palaeo-Tethys to the south. Possible Kaninospirifer is reported for the first time from China.

Numerical simulation of heat and mass transfer in fluidised bed heat treatment furnaces

In this paper, a novel combined theoretical and computational model is developed to simulate the heat and mass transfer between a fluidised bed and a workpiece surface, and within the workpiece by considering the fluidised bed as a medium consisting of a double-particle layer and an even porous layer. The heat and mass-transfer flux from the fluidised bed to the workpiece surface is contributed by dense and bubble phases, respectively. The convective heat and mass transfer is simulated by analysing the gas dynamics in the fluidised bed, while radiative heat transfer is modelled by simulating photon emission in a three-dimensional particle array. The simulation shows that convection is approximately constant, while radiation contributes significantly to the heat transfer. The heat-transfer coefficient on an immersed surface near particles is about 6–10 times that on other areas. The transient heat and mass-transfer coefficient, heat and mass-transfer flux on any surface of the workpiece, transient temperature and carbon distributions at any position of the workpiece during the metal carburising process are studied with the simulation.

Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed

The mass transfer during carburising in a fluidised bed and in a steel workpiece has been studied experimentally in this work. This involved carburising experiment in an electrically heated fluidised bed at 900–970°C with natural gas and air as the atmosphere. A steel workpiece was designed to provide a range of carbon transfer surfaces of different geometries in the fluidised bed, and the carbon transfer coefficient was measured at these surfaces. The carbon transfer coefficient was determined from the carbon distribution within the diffusion layer of the sample. An empirical relationship of the carbon potential as a function of carburising atmosphere, bed temperature and fluidising velocity was determined, based on the understanding of the mass transfer mechanism and analysis of the experimental results.

Ammonia dissociation in the fluidised bed furnace

Ammonia dissociation is the controlling reaction for several important thermochemical heat treatment processes; nitriding, nitrocarburising (ferritic and austenitic) and carbonitriding. The fluidised bed furnace is a convenient and widely used medium for all of these treatments, yet understanding of the reaction in a fluidised bed context is minimal. This paper deals with the influence of process parameters on nitrogen activity aN; temperature, fluidising flowrate, ammonia inlet level, carbonaceous gas. Two basic behaviours were observed; inlet NH3-dependant and inlet NHr insensitive, with a transition region at intermediate temperatures. The nitrocarburising response of steel specimens was measured by optical microscopy of the layer thicknesses and glow discharge optical emission spectroscopy (GD-OES) determination of nitrogen depth-penetration profiles. aN was found by gas analysis of the exit stream ammonia with the aid of a dissociation burette.

Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed

The heat-transfer coefficients around a workpiece immersed in an electrically heated heat treatment fluidised bed were studied. A suspension probe designed to simulate a workpiece of complex geometry was developed to measure local total and radiative heat-transfer coefficients at a high bed temperature. The probe consisted of an energy-storage region separated by insulation from the fluidised bed, except for the measuring surface, and a multi-thermocouple measurement system. Experiments in the fluidised bed were performed for a fluidising medium of 120-mesh alumina, a wide temperature range of 110–1050 °C and a fluidising number range of 1.18–4.24. It was found that the workpiece surface temperature has a more significant effect on heat transfer than the bed temperature. The total heat-transfer coefficient at the upper surface of the workpiece sharply decreased at the start of heating, and then steadily increased as heating progressed, while a sharp decrease became a rapid increase and then a slow increase for the radiative heat-transfer coefficient. A great difference in the heat-transfer coefficients around the workpiece was observed.

Carburising and carbon transfer coefficient in a fluidised bed furnance

The carburising of a steel workpiece with complex geometry in a fluidised bed hasbeen studied experimentally. This involved carburising experiment in an electrically heated fluidised bed at 900 - 970°C with natural gas and air as the atmosphere. The carbon transfer coefficient at the workpiece surface and diffusivity within the workpiece were determined from the carbon distribution within the diffusion layer of the sample. A reverse method and the Levenberg-Marquardt algorithm were used in the calculations. The methodology of the reverses method to extract the carbon transfer coefficient and diffusivity is also discussed in some detail.

Sustainable in 2030? The impact of population growth in Melbourne`s inner activity centres

The advent of sustainable approaches to managing an increase of population in our urban centres, such as the Melbourne 2030 planning policy, has led to questions regarding their successful implementation at local government level. Issues relating to the location of sustainable built form and infrastructure are of particular importance considering Melbourne 2030's direction regarding intensification around existing activity nodes. The following paper embarks on an investigation into the impact of the projected population growth set out in the 2030 policy, focusing particularly on the consequent implications of increased residential densities in and around activity centres within the inner Melbourne region. Utilising various mapping techniques, a series of comparative built form/density scenarios will be generated that begin to explore the issues of implementation faced at a local government level.