Determinants of mortality in oncology patients colonized or infected with Staphylococcus aureus

Oxacillin-resistant Staphylococcus aureus (ORSA) infection is an important cause of hospital morbidity and mortality. The objective of this study was to identify the main factors associated with death in patients colonized or infected with Staphylococcus aureus in a cancer center. A matched-pair case-control study enrolled all patients infected or colonized with ORSA (cases) admitted to the Hospital do Câncer in Rio de Janeiro from 01/01/1992 to 12/31/1994. A control was defined as a patient hospitalized during the same period as the case-patients and colonized or infected with oxacillin-susceptible Staphylococcus aureus (OSSA). The study enrolled 95 cases and 95 controls. Patient distribution was similar for the two groups (p > or = 0.05) with respect to gender, underlying diseases, hospital transfer, prior infection, age, temperature, heart and respiratory rates, neutrophil count, and duration of hospitalization. Univariate analysis of putative risk factors associated with mortality showed the following significant variables: admission to the intensive care unit (ICU), presence of bacteremia, use of central venous catheter (CVC), ORSA colonization or infection, pneumonia, use of urinary catheter, primary lung infection, prior use of antibiotics, mucositis, and absence of cutaneous abscesses. Multivariate analysis showed a strong association between mortality and the following independent variables: admission to ICU (OR [odds ratio]=7.2), presence of Staphylococcus bacteremia (OR=6.8), presence of CVC (OR=5.3), and isolation of ORSA (OR=2.7). The study suggests a higher virulence of ORSA in comparison to OSSA in cancer patients.

Helicobacter pylori genotyping from positive clotests in patients with duodenal ulcer

Even though the seroprevalence of H. pylori may be high in the normal population, a minority develops peptic ulcer. Colonization of the gastric mucosa by more pathogenic vacA strains of H. pylori seems to be associated with enhanced gastric inflammation and duodenal ulcer. H. pylori genotyping from positive CLOtests was developed to determine the vacA genotypes and cagA status in 40 duodenal ulcer patients and for routine use. The pathogenic s1b/ m1/ cagA genotype was the most frequently occurring strain (17/42.5%); only two (5%) patients presented the s2/ m2 genotype, the less virulent strain. Multiple strains were also detected in 17 (42.5%) patients. Multiple strains of H. pylori colonizing the human stomach have been underestimated, because genotyping has been performed from cultures of H. pylori. We concluded that genotyping of H. pylori from a positive CLOtest had the advantages of reducing the number of biopsies taken during endoscopy, eliminating the step of culturing H. pylori, and assuring the presence of H. pylori in the specimen being processed.

Necrotizing enterocolitis, pathogenesis and the protector effect of prenatal corticosteroids

Necrotizing enterocolitis is the most frequently occurring gastrointestinal disorder in premature neonates. Animal models of necrotizing enterocolitis and prenatal administration of cortisone have demonstrated that cortisone may accelerate maturation of the mucosal barrier, therefore reducing the incidence of this gastrointestinal disorder. The authors present a review of the literature of the most important risk factors associated with necrotizing enterocolitis, such as inflammatory gastrointestinal mediators, enteral feeding and bacterial colonization, and immaturity of the gastrointestinal barrier, and we emphasize the necessity for additional studies to explore the prenatal administration of cortisone as a preventive strategy for necrotizing enterocolitis.

The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

Adding fibres to concrete provides several advantages, especially in terms of controlling the crack opening width and propagation after the cracking onset. However, distribution and orientation of the fibres toward the active crack plane are significantly important in order to maximize its benefits. Therefore, in this study, the effect of the fibre distribution and orientation on the post-cracking tensile behaviour of the steel fibre reinforced self-compacting concrete (SFRSCC) specimens is investigated. For this purpose, several cores were extracted from distinct locations of a panel and were subjected to indirect (splitting) and direct tensile tests. The local stress-crack opening relationship (σ-w) was obtained by modelling the splitting tensile test under the finite element framework and by performing an Inverse Analysis (IA) procedure. Afterwards the σ-w law obtained from IA is then compared with the one ascertained directly from the uniaxial tensile tests. Finally, the fibre distribution/orientation parameters were determined adopting an image analysis technique.

Sustainable mortars with incorporation of microencapsulated phase change materials

The construction industry is responsible for high energy and raw materials consumption. Thus, it is important to minimize the high energy consumption by taking advantage of renewable energy sources and reusing industrial waste, decreasing the extraction of natural materials. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. The simultaneous incorporation of PCM and fly ash (FA) can reduce the energy consumption and the amount of materials landfilled. However, the addition of these materials in mortars modifies its characteristics. The main purpose of this study was the production and characterization in the fresh and hardened state of mortars with incorporation of different contents of PCM and FA. The binders studied were aerial lime, hydraulic lime, gypsum and cement. The proportion of PCM studied was 0%, 20%, 40% and 60% of the mass of the sand. The content of fly ash added to the mortars was 0%, 20%, 40% and 60% of the mass of the binder. It was possible to observe that the incorporation of PCM and fly ash in mortars caused differences in properties such as workability, microstructure, water absorption, compressive strength, flexural strength and adhesion.

Time-dependent flexural behaviour of cracked steel fibre reinforced self-compacting concrete panels

In the present work are described and discussed the results of an extensive experimental program that aims to study the long-term behaviour of cracked steel fibre reinforced self-compacting concrete, SFRSCC, applied in laminar structures. In a first stage, the influence of the initial crack opening level (wcr = 0.3 and 0.5 mm), applied stress level, fibre orientation/dispersion and distance from the casting point, on the flexural creep behaviour of SFRSCC was investigated. Moreover, in order to evaluate the effects of the creep phenomenon on the residual flexural strength, a series of monotonic tests were also executed. It was found that wcr = 0.5 mm series showed a higher creep coefficient comparing to the series with a lower initial crack opening. Furthermore, the creep performance of the SFRSCC was influenced by the orientation of the extracted prismatic specimens regarding the direction of the concrete flow within the cast panel.

Shear strengthening of damaged reinforced concrete beams with hybrid composite plates

This paper aims to evaluate experimentally the potentialities of Hybrid Composite Plates (HCPs) technique for the shear strengthening of reinforced concrete (RC) beams that were previously subjected to intense damage in shear. HCP is a thin plate of Strain Hardening Cementitious Composite (SHCC) reinforced with Carbon Fiber Reinforced Polymer (CFRP) laminates. For this purpose, an experimental program composed of two series of beams (rectangular and T cross section) was executed to assess the strengthening efficiency of this technique. In the first step of this experimental program, the control beams, without steel stirrups, were loaded up to their shear failure, and fully unloaded. Then, these pre-damaged beams were shear strengthened by applying HCPs to their lateral faces by using a combination of epoxy adhesive and mechanical anchors. The bolts were applied with a certain torque in order to increase the concrete confinement. The obtained results showed that the increase of load carrying capacity of the damaged strengthened beams when HCPs were applied with epoxy adhesive and mechanical anchors was 2 and 2.5 times of the load carrying capacity of the corresponding reference beams (without HCPs) for the rectangular and T cross section beam series, respectively. To further explore the potentialities of the HCPs technique for the shear strengthening, the experimental tests were simulated using an advanced numerical model by a FEM-based computer program. After demonstration the good predictive performance of the numerical model, a parametric study was executed to highlight the influence of SHCC as an alternative for mortar, as well as the influence of torque level applied to the mechanical anchors, on the load carrying capacity of beams strengthened with the proposed technique.

Biofunctionalization of titanium surfaces for dental implants: osteogenic, anti-microbial and tribocorrosion resistant surfaces

PhD thesis in Biomedical Engineering

Changes in population and land use over time in the Ecuadorian Amazon

This paper draws upon a detailed longitudinal survey of households living on agricultural plots in the northern three provinces of the Ecuadorian Amazon, the principal region of colonization by migrants in Ecuador since the 1970s. Following the discovery of petroleum in 1967 near what has subsequently come to be the provincial capital and largest Amazonian city of Lago Agrio, oil companies built roads to lay pipelines to extract and pump oil across the Andes for export. As a result, for the past 30 years over half of both Ecuador's export earnings and government revenues have come from petroleum extracted from this region. But the roads also facilitated massive spontaneous in-migration of families from origin areas in the Ecuadorian Sierra, characterized by minifundia and rural poverty. This paper is about those migrants and their effects on the Amazonian landscape. We discuss the data collection methodology and summarize key results on settler characteristics and changes in population, land use, land ownership, technology, labor allocation, and living conditions, as well as the relationships between changes in population and changes in land use over time. The population in the study region has been growing rapidly due to both natural population growth (high fertility) and in-migration. This has led to a dramatic process of subdivision and fragmentation of plots in the 1990's, which contrasts with the consolidation of plots that has occurred in most of the mature frontier areas of the Brazilian Amazon. This fragmentation has led to important changes in land tenure and land use, deforestation, cattle raising, labor allocation, and settler welfare.

Da 'portugalidade' à lusofonia

Tese de Doutoramento em Ciências da Comunicação (Especialidade em Teoria da Cultura)

Assessing the production of jet mix columns using alkali activated waste based on mechanical and financial performance and CO2 (eq) emissions

Recent research has proved the potential of alkaline activated fly-ash for soil stabilisation. However, such studies have not focused on the link between financial, mechanical and environmental aspects of this solution, but only on their absolute mechanical properties. The present paper characterises the mechanical behaviour of a large spectrum of activator-ash-soil combinations used to build jet mixing columns, analysing also the cost and CO2 (eq) emissions. The concern with these two vectors forced a decrease in the quantity of stabilising agent added to the soil, relatively to previous research, and the effects of such low quantities have not yet been published. However, the results clearly showed a significant improve in strength, still well above the average values expected when improving the stressstrain behaviour of a weak soil. Uniaxial compressive strength tests were used to assess the effects of the fly-ash percentage, the alkalieash ratio and the water content. The carbon calculator recently developed by the European Federation of Foundation Contractors and the Deep Foundations Institute was used to quantify the CO2 (eq) emissions associated with this technique. The financial cost was estimated based on the experience of a major Portuguese contractor. For comparison purposes, soil cement mixtures were also analysed, using similar conditions and tools used for the soil-ash analysis. Results showed that the cement and ash solutions are very similar in terms of overall performance, with some advantage of the former regarding financial cost, and a significant advantage of the latter regarding the CO2 (eq) emissions. This new grout, although it is in an embryonic stage, it has the potential for broader developments in the field.

Haematophagic behavior in laboratory of Lutzomyia cruzi (Mangabeira) (Diptera: Psychodidae) in relation to three mammalian blood sources in Manaus, Brazil

The sand fly Lutzomyia cruzi is considered as one of vectors of visceral leishmaniasis in Brazil. This work examined optimum feeding age, feeding time, host preference, fecundity rates, and female blood meal volume taken by single females from a closed colony of L. cruzi. Mean feeding time was longer on hamsters, 6.6 minutes, than on humans, 5.7 minutes. 49.1% of the 48h-old flies fed on humans and 43.3% of 72h-old flies fed on hamsters. Of a total of 120 females, 61% fed on humans and 25% fed on hamsters. Total fecundity was significantly higher in females fed on hamster than on human or opossum. Laboratory-reared L. cruzi females fed earlier, more promptly, and preferably on humans than on hamsters when offered these blood-meal sources simultaneously. The blood-meal volume is higher in females fed on hamsters than other hosts (human and opossum).

'Como seiva viva em tronco forte'. A agência noticiosa Lusitânia e o projeto imperial do Estado Novo

O presente estudo pretende descrever as condições políticas e sociais em que foi criada e se desenvolveu a Lusitânia, uma agência noticiosa portuguesa, destinada a contribuir para o fortalecimento do Império português através da difusão do noticiário colonial na metrópole e deste nas colónias. Apesar da escassez de estudos existentes e de não ser conhecido o paradeiro dos arquivos da agência, é possível ainda, através de fontes indiretas, avaliar da importância e do papel ideológico desta agência na construção de um Portugal uno do Minho a Timor, como pretendiam o regime e o fundador da agência, Luís Lupi.