Qualitative modelling of sustainable energy scenarios: An application and extension of the Bon Qualitative Input-Output model

Climate change is one of the major challenges facing economic systems at the start of the 21st century. Reducing greenhouse gas emissions will require both restructuring the energy supply system (production) and addressing the efficiency and sufficiency of the social uses of energy (consumption). The energy production system is a complicated supply network of interlinked sectors with 'knock-on' effects throughout the economy. End use energy consumption is governed by complex sets of interdependent cultural, social, psychological and economic variables driven by shifts in consumer preference and technological development trajectories. To date, few models have been developed for exploring alternative joint energy production-consumption systems. The aim of this work is to propose one such model. This is achieved in a methodologically coherent manner through integration of qualitative input-output models of production, with Bayesian belief network models of consumption, at point of final demand. The resulting integrated framework can be applied either (relatively) quickly and qualitatively to explore alternative energy scenarios, or as a fully developed quantitative model to derive or assess specific energy policy options. The qualitative applications are explored here.

Differences in perceived risks and benefits of herbal, over-the-counter conventional, and prescribed conventional, medicines, and the implications of this for the safe and effective use of herbal products

Objectives: To investigate people's views about the efficacy and specific risks of herbal, over-the-counter (OTC) conventional, and prescribed conventional medicines, and their likelihood of taking a second (herbal or OTC conventional) product in addition to a prescribed medicine. Methods: Experiment 1 (1 factor within-participant design); Experiment 2 (1 factor between-participant design). Convenience samples of general population were given a hypothetical scenario and required to make a number of judgements. Results: People believed herbal remedies to be less effective, but less risky than OTC and prescribed conventional medicines. Herbal medicines were not seen as being safer simply because of their easier availability. Participants indicated that they would be more likely to take a herbal medicine than a conventional OTC medicine in addition to a prescribed medicine, and less likely to consult their doctor in advance. Conclusion: People believe that herbal medicines are natural and relatively safe and can be used with less caution. People need to be given clear information about the risks and benefits of herbal medicines if they are to use such products safety and effectively. (c) 2006 Elsevier Ltd. All rights reserved.

Informing people about the risks and benefits of medicines: implications for the safe and effective use of medicinal products

Providing effective information about drug risks and benefits has become a major challenge for health professionals, as many people are ill equipped to understand, retain and use the information effectively. This paper reviews the growing evidence that people’s understanding (and health behaviour) is not only affected by the content of medicines information, but also by the particular way in which it is presented. Such presentational factors include whether information is presented verbally or numerically, framed positively or negatively, whether risk reductions are described in relative or absolute terms (and baseline information included), and whether information is personalized or tailored in any way. It also looks at how understanding is affected by the order in which information is presented, and the way in which it is processed. The paper concludes by making a number of recommendations for providers of medicines information, about both the content and presentation of such information, that should enhance safe and effective medicines usage.

A framework for comparing pollinator performance: effectiveness and efficiency

Measuring pollinator performance has become increasingly important with emerging needs for risk assessment in conservation and sustainable agriculture that require multi-year and multi-site comparisons across studies. However, comparing pollinator performance across studies is difficult because of the diversity of concepts and disparate methods in use. Our review of the literature shows many unresolved ambiguities. Two different assessment concepts predominate: the first estimates stigmatic pollen deposition and the underlying pollinator behaviour parameters, while the second estimates the pollinator’s contribution to plant reproductive success, for example in terms of seed set. Both concepts include a number of parameters combined in diverse ways and named under a diversity of synonyms and homonyms. However, these concepts are overlapping because pollen deposition success is the most frequently used proxy for assessing the pollinator’s contribution to plant reproductive success. We analyse the diverse concepts and methods in the context of a new proposed conceptual framework with a modular approach based on pollen deposition, visit frequency, and contribution to seed set relative to the plant’s maximum female reproductive potential. A system of equations is proposed to optimize the balance between idealised theoretical concepts and practical operational methods. Our framework permits comparisons over a range of floral phenotypes, and spatial and temporal scales, because scaling up is based on the same fundamental unit of analysis, the single visit.

Cavity-enhanced absorption: detection of nitrogen dioxide and iodine monoxide using a violet laser diode

We present an application of cavity-enhanced absorption spectroscopy with an off-axis alignment of the cavity formed by two spherical mirrors and with time integration of the cavity-output intensity for detection of nitrogen dioxide (NO2) and iodine monoxide (IO) radicals using a violet laser diode at lambda = 404.278 nm. A noise-equivalent (1sigma = root-mean-square variation of the signal) fractional absorption for one optical pass of 4.5x10(-8) was demonstrated with a mirror reflectivity of similar to0.99925, a cavity length of 0.22 m and a lock-in-amplifier time constant of 3 s. Noise-equivalent detection sensitivities towards nitrogen dioxide of 1.8x10(10) molecule cm(-3) and towards the IO radical of 3.3x10(9) molecule cm(-3) were achieved in flow tubes with an inner diameter of 4 cm for a lock-in-amplifier time constant of 3 s. Alkyl peroxy radicals were detected using chemical titration with excess nitric oxide (RO2 + NO --> RO + NO2). Measurement of oxygen-atom concentrations was accomplished by determining the depletion of NO2 in the reaction NO2 + O --> NO + O-2. Noise-equivalent concentrations of alkyl peroxy radicals and oxygen atoms were 3x10(10) molecule cm(-3) in the discharge-flow-tube experiments.

The manufacture and spectral assessment of the filters and antireflection coatings for use in the HIRDLS instrument

This paper describes the design and manufacture of the filters and antireflection coatings used in the HIRDLS instrument. The multilayer design of the filters and coatings, choice of layer materials, and the deposition techniques adopted to ensure adequate layer thickness control is discussed. The spectral assessment of the filters and coatings is carried out using a FTIR spectrometer; some measurement results are presented together with discussion of measurement accuracy and the identification and avoidance of measurement artifacts. The post-deposition processing of the filters by sawing to size, writing of an identification code onto the coatings and the environmental testing of the finished filters are also described.

Fabrication and characterization of micromachined rectangular waveguide components for use at millimeter-wave and terahertz frequencies

The fabrication and characterization of micromachined reduced-height air-filled rectangular waveguide components suitable for integration is reported in this paper. The lithographic technique used permits structures with heights of up to 100 μm to be successfully constructed in a repeatable manner. Waveguide S-parameter measurements at frequencies between 75-110 GHz using a vector network analyzer demonstrate low loss propagation in the TE10 mode reaching 0.2 dB per wavelength. Scanning electron microscope photographs of conventional and micromachined waveguides show that the fabrication technique can provide a superior surface finish than possible with commercially available components. In order to circumvent problems in efficiently coupling free-space propagating beams to the reduced-height G-band waveguides, as well as to characterize them using quasi-optical techniques, a novel integrated micromachined slotted horn antenna has been designed and fabricated, E-, H-, and D-plane far-field antenna pattern measurements at different frequencies using a quasi-optical setup show that the fabricated structures are optimized for 180-GHz operation with an E-plane half-power beamwidth of 32° elevated 35° above the substrate, a symmetrical H-plane pattern with a half-power beamwidth of 23° and a maximum D-plane cross-polar level of -33 dB. Far-field pattern simulations using HFSS show good agreement with experimental results.

Farm productivity and efficiency in rural Bangladesh: the role of education revisited

This article reassesses the debate over the role of education in farm production in Bangladesh using a large dataset on rice producing households from 141 villages. Average and stochastic production frontier functions are estimated to ascertain the effect of education on productivity and efficiency. A full set of proxies for farm education stock variables are incorporated to investigate the ‘internal’ as well as ‘external’ returns to education. The external effect is investigated in the context of rural neighbourhoods. Our analysis reveals that in addition to raising rice productivity and boosting potential output, household education significantly reduces production inefficiencies. However, we are unable to find any evidence of the externality benefit of schooling – neighbour's education does not matter in farm production. We discuss the implication of these findings for rural education programmes in Bangladesh.

Stomatal conductance and not stomatal density determines the long-term reduction in leaf transpiration of poplar in elevated CO2

Using a free-air CO2 enrichment (FACE) experiment, poplar trees (Populus · euramericana clone I214) were exposed to either ambient or elevated [CO2] from planting, for a 5-year period during canopy development, closure, coppice and re-growth. In each year, measurements were taken of stomatal density (SD, number mm2) and stomatal index (SI, the proportion of epidermal cells forming stomata). In year 5, measurements were also taken of leaf stomatal conductance (gs, lmol m2 s1), photosynthetic CO2 fixation (A, mmol m2 s1), instantaneous water-use efficiency (A/E) and the ratio of intercellular to atmospheric CO2 (Ci:Ca). Elevated [CO2] caused reductions in SI in the first year, and in SD in the first 2 years, when the canopy was largely open. In following years, when the canopy had closed, elevated [CO2] had no detectable effects on stomatal numbers or index. In contrast, even after 5 years of exposure to elevated [CO2], gs was reduced, A/E was stimulated, and Ci:Ca was reduced relative to ambient [CO2]. These outcomes from the long-term realistic field conditions of this forest FACE experiment suggest that stomatal numbers (SD and SI) had no role in determining the improved instantaneous leaf-level efficiency of water use under elevated [CO2]. We propose that altered cuticular development during canopy closure may partially explain the changing response of stomata to elevated [CO2], although the mechanism for this remains obscure.

Lumbricus terrestris L. does not impact on the remediation efficiency of compost and biochar amendments

The aim of this study was to test the impact of compost and Biochar, with or without earthworms, on the mobility and availability of metals, and on the growth of grass to re-vegetate contaminated soil from the Parys Mountain mining site, Anglesey. We also determined if the addition of earthworms compromises remediation efforts. In a laboratory experiment, contaminated soil (1343 mg Cu kg−1, 2511 mg Pb kg−1 and 262 mg Zn kg−1) was remediated with compost and/or Biochar. After 77 days Lumbricus terrestris L. earthworms were added to the treatment remediated with both compost and Biochar, and left for 28 days. L. terrestris was not able to survive in the Biochar, compost or unamended treatments. A germination and growth bioassay, using Agrostis capillaris (Common Bent) was then run on all treatments for 28 days. The combination of Biochar and compost decreased water soluble Cu (from 5.6 to 0.2 mg kg−1), Pb (0.17 to less than 0.007 mg kg−1) and Zn (3.3 to 0.05 mg kg−1) in the contaminated soil and increased the pH from 2.7 to 6.6. The addition of L. terrestris to this treatment had no effect on the concentration of the water soluble metals in the remediated soil. The compost was the only treatment that resulted in germination and growth of A. capillaris suitable for re-vegetation purposes. However, the combination of compost, Biochar (with or without L. terrestris) produced the lowest concentrations of Cu (8 mg kg−1) and Zn (36 mg kg−1) in the aboveground biomass, lower than the compost treatment (15 mgCu kg−1 and 126 mgZn kg−1). The addition of Biochar and compost both separately and as co-amendments was effective in reducing the mobility and availability of metals. The addition of L. terrestris did not re-mobilise previously sequestered metals.