Examination of Heterogeneous Crossing Sequences Between Toner and Rollerball Pen Strokes by Digital Microscopy and 3-D Laser Profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.

Label-free cytotoxicity screening assay by digital holographic microscopy.

Abstract We introduce a label-free technology based on digital holographic microscopy (DHM) with applicability for screening by imaging, and we demonstrate its capability for cytotoxicity assessment using mammalian living cells. For this first high content screening compatible application, we automatized a digital holographic microscope for image acquisition of cells using commercially available 96-well plates. Data generated through both label-free DHM imaging and fluorescence-based methods were in good agreement for cell viability identification and a Z'-factor close to 0.9 was determined, validating the robustness of DHM assay for phenotypic screening. Further, an excellent correlation was obtained between experimental cytotoxicity dose-response curves and known IC values for different toxic compounds. For comparable results, DHM has the major advantages of being label free and close to an order of magnitude faster than automated standard fluorescence microscopy.

Estudio de la accesibilidad de los documentos cientificos en soporte digital

Resumen: El artículo analiza los problemas de accesibilidad que actualmente presentan los artículos científicos en soporte digital. El estudio se centra en los aspectos de facilidad de uso del contenido de los documentos digitales según la forma en que se publiquen, sin entrar en el estudio de los distintos sistemas de recuperación. Se analizan los dos formatos más utilizados para la publicación de artículos científicos en soporte digital: HTML y PDF, estudiando el desempeño lector en relación a la presencia de sumarios o de tablas internas o vinculadas. El estudio se ha realizado con dos colectivos: 30 sujetos ciegos, usuarios de Jaws, contactados gracias a la mediación de la Fundación ONCE, y 30 sujetos no ciegos, profesores del Departamento de Biblioteconomía y Documentación de la Universidad de Barcelona. El estudio muestra que la localización de los datos contenidos en tablas se ve facilitada en documentos HTML por la inclusión de un sumario que vincule con la tabla, así como la inclusión de tablas completas en el cuerpo del documento HTML facilita la actividad lectora por parte de los usuarios ciegos. A nivel metodológico la presente investigación aporta dos novedades relevantes respecto a la literatura existente en los estudios de usabilidad con ciegos: estudia la usabilidad del formato PDF y es un test de usabilidad cuantitativo; este último hecho dificulta su comparación con la mayoría de artículos publicados. Abstract: This paper analyses the problems of accessibility posed by scientific articles published in digital format, focusing on the ease of use of their content with respect to the form in which they are published (irrespective of the recovery system). The two most widely used formats for the publication of scientific articles in digital format, HTML and PDF, are analysed, examining reader performance in relation to the presence of contents lists or internal or linked tables. The study involved two groups: 30 blind subjects, all JAWS users, contacted through the ONCE Foundation, and 30 sighted subjects, lecturers in the Department of Librarianship and Documentation of the University of Barcelona. The results shows the location of data in tables is easier in HTML documents through the inclusion of a contents list linked to these tables. Further, the inclusion of complete tables in the body of HTML document facilitates the reading activity of blind users. At the methodological level, this work reports two novelties with respect to the existing literature on usability by blind people: it examines the usability of the PDF format, and discusses a quantitative usability test. The latter hinders comparison with the majority of published articles.

A productivity map of cognitive pretest methos for improving survey questions

Interest in cognitive pretest methods for evaluating survey questionnaires has been increasing for the last three decades. However, analysing the features of the scientific output in the field can be difficult due to its prevalence in public and private institutes whose main mission is not scientific research. The aim of this research is to characterize the current state of scientific output in the field by means of two bibliometric studies for the period from 1980 to 2007. Study 1 analysed documents obtained from the more commonly used bibliographic databases. Study 2 supplemented the body of documents from Study 1 with documents from non-indexed journals, conference papers, etc. Results show a constant growth in the number of publications. The wide dispersion of publication sources, together with the highlighted role of the public and private institutions as centres of production, can also be identified as relevant characteristics of the scientific output in this field.

A road map toward a globally harmonized approach for occupational health surveillance and epidemiology in nanomaterial workers

OBJECTIVE: Few epidemiological studies have addressed the health of workers exposed to novel manufactured nanomaterials. The small current workforce will necessitate pooling international cohorts. METHOD: A road map was defined for a globally harmonized framework for the careful choice of materials, exposure characterization, identification of study populations, definition of health endpoints, evaluation of appropriateness of study designs, data collection and analysis, and interpretation of the results. RESULTS: We propose a road map to reach global consensus on these issues. The proposed strategy should ensure that the costs of action are not disproportionate to the potential benefits and that the approach is pragmatic and practical. CONCLUSIONS: We should aim to go beyond the collection of health complaints, illness statistics, or even counts of deaths; the manifestation of such clear endpoints would indicate a failure of preventive measures.

Iowa 2014 Transportation Map, 2014

Transportation map of Iowa, updated march 1, 2014. map focuses on interstate highways, primary and secondary state roads, county roads, and scenic byways. Also includes railroad lines, airports, waterways, and locks and dams. All 99 counties are represented, as well as approximately 1,000 cities and towns. Points of interest are also marked.

Road Map Math, 1976

Road Map Math is an instructional program for low-achieving students in grades four to twelve. It is helpful in teaching language arts, place geography, map reading and mathematics. This booklet was made in conjunction with Department of Public Instruction, Price Laboratory School at the University of Northern Iowa and the Planning and Research Division of the Iowa Department of Transportation.

L"educació davant la societat digital: presentació

Els articles reunits en aquest monogràfic, que és una iniciativa conjunta de la revista Temps d"Educació i de la revista en línia Interactive Educational Multimedia, reflexionen sobre les conseqüències educatives de la societat digital.1 És veritat que se n"ha escrit molt, i que és només el principi dels canvis que s"estan produint: comparats a vegades amb la impremta i altres vegades amb la pròpia escriptura, molts autors acostumen a situar la revolució digital per damunt de totes les altres revolucions tecnològiques. Al costat d"aquestes tecnofilies, en determinats moments completament acrítiques, la reflexió que qüestiona els canvis ha anat minvant progressivament davant l"avenç generalitzat de les telecomunicacions i de la informàtica, potser com a resultat d"un sentiment d"inevitabilitat. Afortunadament no és el cas dels articles reunits per a aquest monogràfic que incorpora diferents treballs d"un alt contingut.

digital¡. 5è Pla estratègic de les Biblioteques UPC. 2012-2014

Postprint (published version)

digital¡. 5º Plan estratégico de las bibliotecas UPC. 2012-2014

Postprint (published version)

Turistes mobiltzats : el turisme cultural a la societat digital mòbil

L’impacte de la societat en xarxa en el turisme està transformant els models de negoci pel canvi en el flux i en les dinàmiques d’accés a la informació. La irrupció dels mitjans socials i la revolució mòbil canvien la manera de planificar, experimentar i compartir el viatge. Si fa uns anys es parlava de la revolució d’Internet, avui podem dir que estem assistint a la Revolució Mòbil. No es tracta d’una evolució de la primera, sinó d’un fet que té les seves pròpies característiques, els seus protagonistes i la seva implicació en la indústria del turisme i la cultura. El gadget de referència en l’impuls de la Internet social està sent el mòbil, un sensor d’ubiqüitat i polièdric. L’accés a la informació, el consum de continguts i la compra de serveis ja no es limita a una actitud relaxada davant una pantalla, sinó que es produeix al llarg de tot el dia i en qualsevol lloc. Això fa que la mobilitat afecti tot el cicle del viatge, és a dir, l’abans, el durant i el després