996 resultados para density conversion
Resumo:
Using a compact, integrated device at 2.488Gb/s, simultaneous NRZ to RZ format conversion and regeneration was achieved. The regenerated signal has a negative BER sensitivity of -1.5dB compared with a data signal transmitted down 101km of standard fiber.
Resumo:
A variety of hydrogenated and non-hydrogenated amorphous carbon thin films have been characterized by means of grazing-incidence X-ray reflectivity (XRR) to give information about their density, thickness, surface roughness and layering. We used XRR to validate the density of ta-C, ta-C:H and a-C:H films derived from the valence plasmon in electron energy loss spectroscopy measurements, up to 3.26 and 2.39 g/cm3 for ta-C and ta-C:H, respectively. By comparing XRR and electron energy loss spectroscopy (EELS) data, we have been able for the first time to fit a common electron effective mass of m*/me = 0.87 for all amorphous carbons and diamond, validating the `quasi-free' electron approach to density from valence plasmon energy. While hydrogenated films are found to be substantially uniform in density across the film, ta-C films grown by the filtered cathodic vacuum arc (FCVA) show a multilayer structure. However, ta-C films grown with an S-bend filter show a high uniformity and only a slight dependence on the substrate bias of both sp3 and layering.
Resumo:
The simultaneous all optical 3R regeneration and format conversion in a simple, single integrated device was examined. The integrated device consisted of a semiconductor optical fiber (SOA) monolithically integrated with a distributed feedback (DFB) laser. Gain saturation was employed for the transmission of a data signal regenerated all-optically in the laser/amplifier device. The regeneration of the electrically filtered eye diagrams was observed by noise removal and extinction ratio-improvement by the device.
Resumo:
A strain-compensated multiple quantum well device is used as a DFB laser, this has been optimized for low jitter gain switched operation at 10 GHz. The signal is transmitted down 80 km of standard fiber then amplified, filtered and polarization controlled before being injected into a DFB laser. The purpose of this regeneration process is to gain switch the DFB with the extracted clock signal in order to retime the converted signal. This process also simultaneously converts the input NRZ format to an output RZ data to format and results in a signal whose optical power and extinction ratio are considerably improved by the regeneration process.
Resumo:
A novel integrated Multi-Wavelength Grating Cavity (MGC) laser has been used for multi-channel wavelength conversion at 2.488Gbits/s. Functions demonstrated include conversion to multiple wavelengths, WDM multiplexing and 1×4 space switching.
Resumo:
All-optical routing of 2.5Gbit/s WDM signals across two cascaded Optical Cross Connects(OXCs) with a penalty of only 0.6dB has been demonstrated using tuneable wavelength converters and a passive WDM router.
Resumo:
A model of graphite which is easy to comprehend and simple to implement for the simulation of scanning tunneling microscopy (STM) images is described. This model simulates the atomic density of graphite layers, which in turn correlates with the local density of states. The mechanism and construction of such a model is explained with all the necessary details which have not been explicitly reported before. This model is applied to the investigation of rippling fringes which have been experimentally observed on a superlattice, and it is found that the rippling fringes are not related to the superlattice itself. A superlattice with abnormal topmost layers interaction is simulated, and the result affirms the validity of the moiré rotation pattern assumption. The "odd-even" transition along the atomic rows of a superlattice is simulated, and the simulation result shows that when there is more than one rotated layer at the top, the "odd-even" transition will not be manifest. ©2005 The Japan Society of Applied Physics.
Resumo:
The penaeid prawns of Sri Lanka from estuaries and sea are an important commercial fishery resource. This resource has been exploited over the last century or more by local fishermen using indigenous fishing gear from locally sail-driven or oar-driven fishing crafts. In more recent times, the Fisheries Research Division of the Department of Fisheries undertook surveys of the seas and lagoons of Sri Lanka with a view to ascertain whether any unexploited resources of prawns existed. These publications deal with the species composition, biology, distribution and abundance in the lagoons and inshore waters of Sri Lanka.
Resumo:
The black muntjac (Muntiacus crinifrons, 2n = 8 female/9 male) is a critically endangered mammalian species that is confined to a narrow region of southeastern China. Male black muntjacs have an astonishing X1X2Y1Y2Y3 sex chromosome system, unparalleled i
Resumo:
A semiconductor optical amplifier monolithically integrated with a distributed feedback pump laser is used for non-degenerate four wave mixing applications. Experimental results are presented which illustrate the use of this compact device for both wavelength conversion and dispersion compensation applications at high data rates.
Resumo:
Background: CpG islands, which are clusters of CpG dinucleotides in GC-rich regions, are considered gene markers and represent an important feature of mammalian genomes. Previous studies of CpG islands have largely been on specific loci or within one geno
Resumo:
The optimisation of stocking density of Thai silver
barb (Barbodes gonionotus) in the polyculture with Labeo rohita, Catla cat/a and Cyprinus cmpio was investigated in seasonal
ponds. Three different stocking densities of Thai silver barb i.e., 5,000, 6,000 and 7,000
fingerlings ha-1 were tested with stocking density of carps fixed at the rate of 10,000
fingerlings ha-1 Duckweed was applied to all ponds supplemented with rice bran and oil
cake. There were no significant variations on either water quality parameters or
abundance of planktonic organisms due to the different stocking densities of silver barb.
A significantly higher fish production (p
Resumo:
A 70 day long experiment was carried out to evaluate three commercial pangas feeds available in Bangladesh viz. Quality Feeds Ltd. (QF), Aftab Bohumukhi Farm Ltd. (ABF) and Saudi-Bangla Fish Feed Ltd. (SBFF) (designated as treatment_T1 T2 and T3) on the growth of Pangas, Pangasius hypophthalmus. Each treatment had two replicates using six experimental ponds of each 80m2 size. The stocking density was 250 fish/80m2. At the beginning, the fish were fed twice daily at 15% of their body weight which was gradually reduced to 10 and 6%, respectively for the rest of the period. The ranges of water quality parameters observed were: temperature 29.0°C- ~5.1 °C, pH 6.85 - 8.52, DO 1.71 - 7.65 mg/1 and transparency or Secchi depth 14.5 - 30.0 em. The mean weight gain of fish was significantly (~<0.05) higher in T3 followed by T2 and T. The specific growth rate (SGR) ranged. between 4.09 and 5.06, feed conversion ratio (FCR) values between 1.54 and 1.61 with treatment T1 showing the lowest FCR. Protein efficiency ratio (PER) values ranged between 2.03 and 2.11. The survival of fish varied between 90.4 and 91.6%. The significantly (P<0.05) highest production of fish (kg/ha/70 days) and profit (Tk/ha/70 days) was observe in T3 (SBFF) followed by T2 (ABF) and T1 (QF), respectively. The result of the study showed that on the basis of nutritive value and growth performance of pangas, feed from Saudi-Bangla Fish Feed Ltd. is the best.
Resumo:
Effects of three stocking densities, viz., 35, 50 and 65/decimal (1 decimal = 40.48 m2) of juvenile freshwater prawn (Macrobrachium rosenbergii) on prawn and fish production were tested in a polycuture system with silver carp (Hypophthalmichthys molitrix), catla (Catla catla), Grass carp (Ctenophmyngodon idella) and silver barb (Barbodes gonionotus). The fish stocking density was 19/decimal with the species combination of silver carp-10, catlac-6, grass carp-1 and silver barb-2. In a 8-month culture period, the prawn yield 423 ± 144 kg/ha was significantly lower (P< 0.5) with the prawn stocking density of 35/decimal than that of 548 ± 178 kg/ha and 662 ± 243 kg/ha with 50 and 65/decimal respectively. The fish production (1844-1891 kg/ha) did not differ significantly (p <0.05) among the three treatments indicating that prawn stocking densities had no influence on fish yield. The lower mean harvest weight (62 g) and survival rate (67 g) and higher yield (2.67 kg/decimal) with the highest stocking rate of prawn reveals that as density was increased, prawn survival and individual weight at harvest decreased but total yield increased.