Distribution, demography, and discard mortality of crabs caught as bycatch in an experimental pot fishery for toothfish (Dissostichus eleginoides) in the South Atlantic

Between March 2000 and April 2001 two commercial fishing vessels fished for toothfish (Dissostichus eleginoides) off South Georgia using pots. A significant number of lithodid crabs (three species of Paralomis spp.) were caught as bycatch. Paralomis spinosissima occurred in shallow water, generally shallower than 700 m. Paralomis anamerae, not previously reported from this area and therefore representing a considerable southerly extension in the reported geographic range of this species, had an intermediate depth distribution from 400 to 800 m. Paralomis formosa was present in shallow waters but reached much higher catch levels (and, presumably, densities) between 800 and 1400 m. Differences were also noted in depth distribution of the sexes and size of crabs. Depth, soak time, and area were found to significantly influence crab catch rates. Few crabs (3% of P. spinosissima and 7% of P. formosa) were males above the legal size limit and could therefore be retained. All other crabs were discarded. Most crabs (>99% of P. formosa, >97% of P. spinosissima, and >90% of P. anamerae) were lively on arrival on deck and at subsequent discard. Mortality rates estimated from re-immersion experiments indicated that on the vessel where pots were emptied directly onto the factory conveyor belt 78–89% of crabs would survive discarding, whereas on the vessel where crabs were emptied down a vertical chute prior to being sorted, survivorship was 38–58%. Of the three, P. anamerae was the most vulnerable to handling onboard and sub-sequent discarding. Paralomis spinosissima seemed more vulnerable than P. formosa.

Larval and settlement periods of the northern searobin (Prionotus carolinus) and the striped searobin (P. evolans)

This study reports new information about searobin (Prionotus spp.) early life history from samples collected with a Tucker trawl (for planktonic stages) and a beam trawl (for newly settled fish) from the coastal waters of New Jersey. Northern searobin, Prionotus carolinus, were much more numerous than striped searobin, P. evolans, often by an order of magnitude. Larval Prionotus were collected during the period July–October and their densities peaked during September. For both species, notochord flexion was complete at 6–7 mm standard length (SL) and individuals settled at 8–9 mm SL. Flexion occurred as early as 13 days after hatching and settlement occurred as late as 25 days after hatching, according to ages estimated from sagittal microincrements. Both species settled directly in continental shelf habitats without evidence of delayed metamorphosis. Spawning, larval dispersal, or settlement may have occurred within certain estuaries, particularly for P. evolans; thus collections from shelf areas alone do not permit estimates of total larval production or settlement rates. Reproductive seasonality of P. carolinus and P. evolans may vary with respect to latitude and coastal depth. In this study, hatching dates and sizes of age-0 P. carolinus varied with respect to depth or distance from the New Jersey shore. Older and larger age-0 individuals were found in deeper waters. These variations in searobin age and size appear to be the combined result of intraspecific variations in searobin reproductive seasonality and the limited capability of searobin eggs and larvae to disperse.

Effects of experimental harvest on red sea urchins (Strongylocentrotus franciscanus) in northern Washington

Commercial harvest of red sea urchins began in Washington state in 1971. Harvests peaked in the late 1980s and have since declined substantially in Washington and other areas of the U.S. west coast. We studied effects of experimental harvest on red sea urchins in San Juan Channel (SJC), a marine reserve in northern Washing-ton. We recorded changes in density and size distribution of sea urchin populations resulting from three levels of experimental harvest: 1) annual size-selective harvest (simulating cur-rent commercial urchin harvest regulations), 2) monthly complete (non–size selective) harvest, and 3) no harvest (control) sites. We also examined re-colonization rates of harvested sites. The red sea urchin population in SJC is composed of an accumulation of large, old individuals. Juvenile urchins represent less than 1% of the population. Lower and upper size limits for commercial harvest protect 5% and 45% of the population, respectively. Complete harvest reduced sea urchin densities by 95%. Annual size-selective harvest significantly decreased sea urchin densities by 67% in the first year and by 47% in the second year. Two years of size-selective harvest significantly altered the size distribution of urchins, decreasing the density of legal-size urchins. Recolonization of harvested sites varied seasonally and occurred primarily through immigration of adults. Selective harvest sites were recolonized to 51% and 38% of original densities, respectively, six months after the first and second annual harvests. Yields declined substantially in the second year of size-selective harvest because of the fishing down of the population and because of low recolonization rates of harvested sites. We recommend that managers consider the potential efficacy of marine harvest refuges and reevaluate the existing upper and lower size limits for commercial harvest to improve long-term management of the sea urchin fishery in Washington.

Early and better maturity in carp brood stock with control of environment and feeding

Available of carp breeders in their prim state of maturity is a major constraint in hypophysation. Experiments conducted in a fish farm at Naihati, West Bengal, for two consecutive years, 1983-84 and 1984-85, clearly prove that by manipulation of environmental parameters such as metabolites, dissolved oxygen, running water conditions, as also of stock densities and quality and quantity of feed. Catla catla, Hypophythalmichthys molitrix, Labeo rohita, Cirrhina mrigala and Ctenopharyngodon idella can be made to attain better maturity and spawning stage much earlier than normal i.e. even in summer months and the entire stock spawned during the period from March to September. Percentage of successful breeding, quantities of eggs released and fertilised in relation to the body weight of all the species, were also found to be more in comparison to the brood stock raised through the conventional methods.

On the response of zooplankton in an electrical field

Zooplankton showed directional movement towards the positive electrode in an electrical field till the current continued to flow. Examination of the plankton 24 hours after their exposure for one minute to different current densities showed considerable mortality, the percentage of which was more in the case of the larger size groups.

On the effect of electrical field on Indian carps in captivity

Threshold current densities required for narcosis of fish in captivity differed in different species. Increased temperature of the water had greater effect on the fishes while changes of pH had no appreciable effect on narcosis in the fishes. Impulse currents of 50 V were found to have better effect on the fishes than continuous current of 180-220 V.

Nursery rearing of Macrobrachium rosenbergii (de Man) using hapa-nets: effects of stocking density

An experiment was conducted in two phases for 45 days each to study the effects of six stocking densities (phase-I: 100, 200 and 300 PL/m² and phase-II: 250, 500 and 750 PL/m²) on growth and survival of Macrobrachium rosenbergii postlarvae (PL) in nylon hapa-nets (1.8m x 1.8m x 1.4m) installed in a pond. Stocking densities of 100, 200 and 300 PL 10/m² resulted in similar (P<0.05) body length (47-48 mm) and survival rate (84-88%), while body weight (0.62g) in PL with 300/m² was significantly lower than that (0.70g) in PL with 100 and 200/m². The growth (body length 47mm and weight 0.64g) and survival (84%) of PL stocked at 250 PL/m² density were significantly higher (P<0.05) than that of PL at 500 and 750/m². Besides the variation in growth and survival in PL at six tests stocking densities, a sharp increase in body weight of PL was observed beginning at the 4th week of rearing.

Impact of stocking density on growth and survival rate of mud crab (Scylla serrata Froskal)

A 10-weeks culture trial of mud crab, Scylla serrata in brackish water earthen pond was conducted in different stocking densities. The aim of the experiment was to identify a suitable stocking density for optimum production. There were three treatment as 5000 crab lings/ha, 10000 crab lings/ha and 15000 crab lings/ha of each with three replications. The initial mean weight of crab lings were same (5.5 ± 0.13 g). The experimental month was June '95 to August '95. The size of each pond was 500 m². To maintain good water quality water was exchanged in every spring tide. The salinity during the experiment were 2-18ppt. Prepared feed of about 32% protein consisting fish meal, MOC rice bran and wheat flour was used at 5% of their body weight. In terms of production, survival rate, growth and carapace width, the stocking density having 10000/ha showed the best (P

Limnological conditions of naturally turbid ponds and its effects on fish growth

An experiment was conducted on six naturally turbid ponds in the village of Salakandi situated to the south-west corner of Bangladesh Agricultural University, Mymensingh for a period of three months from July to September '96. The experiment was performed by studying the physicochemical factors of water and soil, the biological factors such as densities of phytoplankton and zooplankton, and the growth of fishes. During the experimental period water turbidity varied among ponds. The highest value of turbidity was found to be 679±183.6 FTU in pond 1 and the lowest was 158±23.31 FTU in pond 4. The maximum and the minimum water transparency were recorded in the month of July and September respectably. The lowest net weight of fishes was found 28.8 kg/ha/year in pond 1 due to high turbidity and the highest was 35.8 kg/ha/year in pond 4 due to low turbidity. Most of the correlations between turbidity and transparency, phytoplankton, and zooplankton were significant at 1% and 5% levels.

Effect of stocking density on the growth of Thai pangas, Pangasius sutchi (Fowler) in net cage fed on formulated diet

A three month long experiment was conducted to observe the effect of stocking density on the growth of Pangasius sutchi in net cages. The size of each cage was 1m³.The three stocking densities used were 40, 50 and 60 fishes/m³ and designated as treatment T1, T2 and T3 respectively. Each treatment had three replicates. All the fishes were of same age group having mean length and weight of 7.13 ± 1.37 cm and 2.46 ± 0.12 g respectively. The fish in all the net cages were fed a diet containing 34% protein. The result of the study showed that fish in the treatment T1 stocked at the rate of 40 fish/m³ resulted the best individual weight gain followed by T2 and T3 respectively. The specific growth rate (SGR) ranged between 3.51 and 3.09, the food conversion ratio (FCR) values ranged between 1.73 and 2.04 with treatment T1 resulting the lowest FCR. The protein efficiency ratios (PER) values were 1.69, 1.16 and 1.43 for treatment T1, T2 and T3 respectively. There was no significant (P>0.05) variation among the survival rates of fish which ranged between 92 and 95%. The net productions in different treatments were 2189, 2343, and 2283g for treatment T1, T2 and T3 respectively. The result of the present study indicated that the best individual growth of P. sutchi was obtained at a density of 40 fish/m³ but the highest total production was obtained at a stocking density of 50 fish/m³ in net cages.

Minimization of cannibalism of African catfish (Clarias gariepinus Burchell) larvae in indoor culture system

For minimizing cannibalism of African catfish (Clarias gariepinus) larvae two trials for a period of 14 and 15 days respectively in four aquaria of size 120x49x32 cm³ were conducted. Seven days old African catfish larvae with an initial total length and weight of 7.84 (±0.40) mm and 4.40 (±1.18) mg respectively in the first trial and similarly 7.52(±0.61) mm and 3.98 (±0.56) mg in the second trial at the rate of same stocking densities of 2500 larvae in each aquarium were stocked in both trials. Cannibalistic larvae were separated by using grader frame from each treatment at 7 days and 5 days interval during first and second trial respectively. Two mesh sizes i.e., 5 mm and 7 mm were used in the grader frame in both trials. Survival rate was significantly higher in T1 than that of T2 in each trial. Grading of larvae with 5 days interval resulted higher survival rate than that of 7 days interval.

Distribution of critical current density in large YBa2Cu3O7-δ grains fabricated using seeded peritectic solidification

High quality large grain high Tc superconducting ceramics offer enormous potential as 'permanent' magnets and in magnetic screening applications at 77K. This requires sample dimensions -cm with uniform high critical current densities of the order 105 A/cm2 in applied magnetic fields of IT. We report a study of the magnetic characterisation of a typical large YBa2Cu3O7-δ grain, prepared by seeded peritectic solidification, and correlate the magnetically determined critical current density, Jc, with microstuctural features from different regions of the bulk sample. From this data we extract the temperature, field and positional dependence of the critical current density of the samples and the irreversibility line. We find that whilst the bulk sample exhibits a good Jc of order 104 A/cm2 (77K, 1T), the local Jc is strongly correlated with the sample microstructure towards the edge of the sample and more severely at the centre of the sample by the presence of SmBa2Cu3O7-δ seed crystal. © 1997 IEEE.

Bayesian approach to signal modelling

In this paper, an introduction to Bayesian methods in signal processing will be given. The paper starts by considering the important issues of model selection and parameter estimation and derives analytic expressions for the model probabilities of two simple models. The idea of marginal estimation of certain model parameter is then introduced and expressions are derived for the marginal probability densities for frequencies in white Gaussian noise and a Bayesian approach to general changepoint analysis is given. Numerical integration methods are introduced based on Markov chain Monte Carlo techniques and the Gibbs sampler in particular.

Field emission from tetrahedrally bonded amorphous carbon

The field emission behaviour of a series of Tetrahedrally Bonded Amorphous Carbon (ta-C) films has been measured. The films were produced using a Filtered Cathodic Vacuum Arc System. The threshold field for emission and current densities achievable have been investigated as a function of sp3/sp2 bonding ratio and nitrogen content. Typical as-grown undoped ta-C films have a threshold field of order 10-15 V/μm and optimally nitrogen-doped films exhibit fields as low as 5 V/μm. The emission as a function of back contact and front surface condition has also been considered and shows that the back contact has only a minor effect on emission efficiency. However, after etching in either an oxygen or hydrogen plasma, the films show a marked reduction in threshold field, down to as low as 2-3 V/μm, and a marked improvement in emission site density.

Tetrahedrally bonded amorphous carbon for field-emission displays

Field emission from a series of tetrahedrally bonded amorphous-carbon (ta-C) films, deposited in a filtered cathodic vacuum arc, has been measured. The threshold field for emission and current densities achievable have been investigated as a function of sp3/sp2 bonding ratio and nitrogen content. Typical as-grown undoped ta-C films have threshold fields of the order 10-15 V/μm and optimally nitrogen doped films exhibited fields as low as 5 V/μm. In order to gain further understanding of the mechanism of field emission, the films were also subjected to H2, Ar, and O2 plasma treatments and were also deposited onto substrates of different work function. The threshold field, emission current, emission site densities were all significantly improved by the plasma treatment, but little dependence of these properties on work function of the substrate was observed. This suggests that the main barrier to emission in these films is at the front surface.