Towards the Use of Radar Winds in Numerical Weather Prediction

Numerical weather prediction (NWP) models provide the basis for weather forecasting by simulating the evolution of the atmospheric state. A good forecast requires that the initial state of the atmosphere is known accurately, and that the NWP model is a realistic representation of the atmosphere. Data assimilation methods are used to produce initial conditions for NWP models. The NWP model background field, typically a short-range forecast, is updated with observations in a statistically optimal way. The objective in this thesis has been to develope methods in order to allow data assimilation of Doppler radar radial wind observations. The work has been carried out in the High Resolution Limited Area Model (HIRLAM) 3-dimensional variational data assimilation framework. Observation modelling is a key element in exploiting indirect observations of the model variables. In the radar radial wind observation modelling, the vertical model wind profile is interpolated to the observation location, and the projection of the model wind vector on the radar pulse path is calculated. The vertical broadening of the radar pulse volume, and the bending of the radar pulse path due to atmospheric conditions are taken into account. Radar radial wind observations are modelled within observation errors which consist of instrumental, modelling, and representativeness errors. Systematic and random modelling errors can be minimized by accurate observation modelling. The impact of the random part of the instrumental and representativeness errors can be decreased by calculating spatial averages from the raw observations. Model experiments indicate that the spatial averaging clearly improves the fit of the radial wind observations to the model in terms of observation minus model background (OmB) standard deviation. Monitoring the quality of the observations is an important aspect, especially when a new observation type is introduced into a data assimilation system. Calculating the bias for radial wind observations in a conventional way can result in zero even in case there are systematic differences in the wind speed and/or direction. A bias estimation method designed for this observation type is introduced in the thesis. Doppler radar radial wind observation modelling, together with the bias estimation method, enables the exploitation of the radial wind observations also for NWP model validation. The one-month model experiments performed with the HIRLAM model versions differing only in a surface stress parameterization detail indicate that the use of radar wind observations in NWP model validation is very beneficial.

Exploiting ground-based measurements of the Global Positioning System for numerical weather prediction

Data assimilation provides an initial atmospheric state, called the analysis, for Numerical Weather Prediction (NWP). This analysis consists of pressure, temperature, wind, and humidity on a three-dimensional NWP model grid. Data assimilation blends meteorological observations with the NWP model in a statistically optimal way. The objective of this thesis is to describe methodological development carried out in order to allow data assimilation of ground-based measurements of the Global Positioning System (GPS) into the High Resolution Limited Area Model (HIRLAM) NWP system. Geodetic processing produces observations of tropospheric delay. These observations can be processed either for vertical columns at each GPS receiver station, or for the individual propagation paths of the microwave signals. These alternative processing methods result in Zenith Total Delay (ZTD) and Slant Delay (SD) observations, respectively. ZTD and SD observations are of use in the analysis of atmospheric humidity. A method is introduced for estimation of the horizontal error covariance of ZTD observations. The method makes use of observation minus model background (OmB) sequences of ZTD and conventional observations. It is demonstrated that the ZTD observation error covariance is relatively large in station separations shorter than 200 km, but non-zero covariances also appear at considerably larger station separations. The relatively low density of radiosonde observing stations limits the ability of the proposed estimation method to resolve the shortest length-scales of error covariance. SD observations are shown to contain a statistically significant signal on the asymmetry of the atmospheric humidity field. However, the asymmetric component of SD is found to be nearly always smaller than the standard deviation of the SD observation error. SD observation modelling is described in detail, and other issues relating to SD data assimilation are also discussed. These include the determination of error statistics, the tuning of observation quality control and allowing the taking into account of local observation error correlation. The experiments made show that the data assimilation system is able to retrieve the asymmetric information content of hypothetical SD observations at a single receiver station. Moreover, the impact of real SD observations on humidity analysis is comparable to that of other observing systems.

On the behaviour of some physical parameterization methods in high-resolution numerical weather prediction models

Modern-day weather forecasting is highly dependent on Numerical Weather Prediction (NWP) models as the main data source. The evolving state of the atmosphere with time can be numerically predicted by solving a set of hydrodynamic equations, if the initial state is known. However, such a modelling approach always contains approximations that by and large depend on the purpose of use and resolution of the models. Present-day NWP systems operate with horizontal model resolutions in the range from about 40 km to 10 km. Recently, the aim has been to reach operationally to scales of 1 4 km. This requires less approximations in the model equations, more complex treatment of physical processes and, furthermore, more computing power. This thesis concentrates on the physical parameterization methods used in high-resolution NWP models. The main emphasis is on the validation of the grid-size-dependent convection parameterization in the High Resolution Limited Area Model (HIRLAM) and on a comprehensive intercomparison of radiative-flux parameterizations. In addition, the problems related to wind prediction near the coastline are addressed with high-resolution meso-scale models. The grid-size-dependent convection parameterization is clearly beneficial for NWP models operating with a dense grid. Results show that the current convection scheme in HIRLAM is still applicable down to a 5.6 km grid size. However, with further improved model resolution, the tendency of the model to overestimate strong precipitation intensities increases in all the experiment runs. For the clear-sky longwave radiation parameterization, schemes used in NWP-models provide much better results in comparison with simple empirical schemes. On the other hand, for the shortwave part of the spectrum, the empirical schemes are more competitive for producing fairly accurate surface fluxes. Overall, even the complex radiation parameterization schemes used in NWP-models seem to be slightly too transparent for both long- and shortwave radiation in clear-sky conditions. For cloudy conditions, simple cloud correction functions are tested. In case of longwave radiation, the empirical cloud correction methods provide rather accurate results, whereas for shortwave radiation the benefit is only marginal. Idealised high-resolution two-dimensional meso-scale model experiments suggest that the reason for the observed formation of the afternoon low level jet (LLJ) over the Gulf of Finland is an inertial oscillation mechanism, when the large-scale flow is from the south-east or west directions. The LLJ is further enhanced by the sea-breeze circulation. A three-dimensional HIRLAM experiment, with a 7.7 km grid size, is able to generate a similar LLJ flow structure as suggested by the 2D-experiments and observations. It is also pointed out that improved model resolution does not necessary lead to better wind forecasts in the statistical sense. In nested systems, the quality of the large-scale host model is really important, especially if the inner meso-scale model domain is small.

Clinical reasoning: The relative contribution of identification, interpretation and hypothesis errors to misdiagnosis

The aim of this study was to identify and describe the types of errors in clinical reasoning that contribute to poor diagnostic performance at different levels of medical training and experience. Three cohorts of subjects, second- and fourth- (final) year medical students and a group of general practitioners, completed a set of clinical reasoning problems. The responses of those whose scores fell below the 25th centile were analysed to establish the stage of the clinical reasoning process - identification of relevant information, interpretation or hypothesis generation - at which most errors occurred and whether this was dependent on problem difficulty and level of medical experience. Results indicate that hypothesis errors decrease as expertise increases but that identification and interpretation errors increase. This may be due to inappropriate use of pattern recognition or to failure of the knowledge base. Furthermore, although hypothesis errors increased in line with problem difficulty, identification and interpretation errors decreased. A possible explanation is that as problem difficulty increases, subjects at all levels of expertise are less able to differentiate between relevant and irrelevant clinical features and so give equal consideration to all information contained within a case. It is concluded that the development of clinical reasoning in medical students throughout the course of their pre-clinical and clinical education may be enhanced by both an analysis of the clinical reasoning process and a specific focus on each of the stages at which errors commonly occur.

The clinical reasoning characteristics of diagnostic experts

The aim of this study was to identify and describe the clinical reasoning characteristics of diagnostic experts. A group of 21 experienced general practitioners were asked to complete the Diagnostic Thinking Inventory (DTI) and a set of 10 clinical reasoning problems (CRPs) to evaluate their clinical reasoning. Both the DTI and the CRPs were scored, and the CRP response patterns of each GP examined in terms of the number and type of errors contained in them. Analysis of these data showed that six GPs were able to reach the correct diagnosis using significantly less clinical information than their colleagues. These GPs also made significantly fewer interpretation errors but scored lower on both the DTI and the CRPs. Additionally, this analysis showed that more than 20% of misdiagnoses occurred despite no errors being made in the identification and interpretation of relevant clinical information. These results indicate that these six GPs diagnose efficiently, effectively and accurately using relatively few clinical data and can therefore be classified as diagnostic experts. They also indicate that a major cause of misdiagnoses is failure to properly integrate clinical data. We suggest that increased emphasis on this step in the reasoning process should prove beneficial to the development of clinical reasoning skill in undergraduate medical students.

Assessing clinical reasoning: A method to monitor its development in a PBL curriculum

The aim of this study was to develop and trial a method to monitor the evolution of clinical reasoning in a PBL curriculum that is suitable for use in a large medical school. Termed Clinical Reasoning Problems (CRPs), it is based on the notion that clinical reasoning is dependent on the identification and correct interpretation of certain critical clinical features. Each problem consists of a clinical scenario comprising presentation, history and physical examination. Based on this information, subjects are asked to nominate the two most likely diagnoses and to list the clinical features that they considered in formulating their diagnoses, indicating whether these features supported or opposed the nominated diagnoses. Students at different levels of medical training completed a set of 10 CRPs as well as the Diagnostic Thinking Inventory, a self-reporting questionnaire designed to assess reasoning style. Responses were scored against those of a reference group of general practitioners. Results indicate that the CRPs are an easily administered, reliable and valid assessment of clinical reasoning, able to successfully monitor its development throughout medical training. Consequently, they can be employed to assess clinical reasoning skill in individual students and to evaluate the success of undergraduate medical schools in providing effective tuition in clinical reasoning.

Promoting and providing expert guidance in work-intensive clinical settings

This paper discusses how expert guidance can be best provided in work intensive clinical settings. The adequacy for supporting learning in the clinical practicum for health care disciplines is often complicated by the intensive work practices in healthcare settings. Often, clinicians' work is so intense that the scope for providing close guidance for students is quite restricted. The case advanced here draws on a range of empirical work to propose how clinician-student interactions might be optimized through the provision of a clinical ccn guided learning such as demonstrating and role-modeling. These roles can contribute in essential ways to the development of learning environments where clinicians have the opportunity to facilitate the learning of others as part of their workload, and without being burdened by the requirements of teaching and assessment processes. It differs from other approaches because although clinicians partner students and provide feedback to them, clinicians are not expected to formally assess or award a grade for student performance. Assessment and remedial action, when required, is undertaken by the role of a designated clinical supervisor qualified to perform such activities. © 2010 Springer Science+Business Media B.V.

Interprofessional education in clinical practice: Not a single vaccine

In increasingly complex health service environments, the quality of teamwork and co-operation between doctors, nurses and allied health professionals, is 'under the microscope'. Interprofessional education (IPE), a process whereby health professionals learn 'from, with and about each other', is advocated as a response to widespread calls for improved communication and collaboration between healthcare professionals. Although there is much that is commendable in IPE, the authors caution that the benefits may be overstated if too much is attributed to, or expected of, IPE activities. The authors propose that clarity is required around what can realistically be achieved. Furthermore, engagement with clinicians in the clinical practice setting who are instrumental in assisting students make sense of their knowledge through practice, is imperative for sustainable outcomes. © AHHA 2010.

The mini clinical evaluation exercise (mini-CEX) for assessing clinical performance of international medical graduates

Objective: To evaluate the feasibility, reliability and acceptability of the mini clinical evaluation exercise (mini-CEX) for performance assessment among international medical graduates (IMGs). Design, setting and participants: Observational study of 209 patient encounters involving 28 IMGs and 35 examiners at three metropolitan teaching hospitals in New South Wales, Victoria and Queensland, September-December 2006. Main outcome measures: The reliability of the mini-CEX was estimated using generatisability (G) analysis, and its acceptability was evaluated by a written survey of the examiners and IMGs. Results: The G coefficient for eight encounters was 0.88, suggesting that the reliability of the mini-CEX was 0.90 for 10 encounters. Almost half of the IMGs (7/16) and most examiners (14/18) were satisfied with the mini-CEX as a learning tool. Most of the IMGs and examiners enjoyed the immediate feedback, which is a strong component of the tool. Conclusion: The mini-CEX is a reliable tool for performance assessment of IMGs, and is acceptable to and well received by both learners and supervisors.

Clinical teaching: Maintaining an educational role for doctors in the new health care environment

Context and objectives: Good clinical teaching is central to medical education but there is concern about maintaining this in contemporary, pressured health care environments. This paper aims to demonstrate that good clinical practice is at the heart of good clinical teaching. Methods: Seven roles are used as a framework for analysing good clinical teaching. The roles are medical expert, communicator, collaborator, manager, advocate, scholar and professional. Results: The analysis of clinical teaching and clinical practice demonstrates that they are closely linked. As experts, clinical teachers are involved in research, information retrieval and sharing of knowledge or teaching. Good communication with trainees, patients and colleagues defines teaching excellence. Clinicians can 'teach' collaboration by acting as role models and by encouraging learners to understand the responsibilities of other health professionals. As managers, clinicians can apply their skills to the effective management of learning resources. Similarly skills as advocates at the individual, community and population level can be passed on in educational encounters. The clinicians' responsibilities as scholars are most readily applied to teaching activities. Clinicians have clear roles in taking scholarly approaches to their practice and demonstrating them to others. Conclusion: Good clinical teaching is concerned with providing role models for good practice, making good practice visible and explaining it to trainees. This is the very basis of clinicians as professionals, the seventh role, and should be the foundation for the further development of clinicians as excellent clinical teachers.

In-training assessment - Its potential in enhancing clinical teaching

Context In-training assessment (ITA) has established its place alongside formative and summative assessment at both the undergraduate and postgraduate level. In this paper the authors aimed to identify those characteristics of ITA that could enhance clinical teaching. Methods A literature review and discussions by an expert working group at the Ninth Cambridge Conference identified the aspects of ITA that could enhance clinical teaching. Results The features of ITA identified included defining the specific benefits to the learner, teacher and institution, and highlighting the patient as the context for ITA and clinical teaching. The ‘mapping’ of a learner’s progress towards the clinical teaching objectives by using multiple assessments over time, by multiple observers in both a systematic and opportunistic way correlates with the incremental nature of reaching clinical competence. Conclusions The importance of ITA based on both direct and indirect evidence of what the learner actually does in the real clinical setting is emphasized. Particular attention is given to addressing concerns in the more controversial areas of assessor training, ratings and documentation for ITA. Areas for future research are also identified.

Prediction of flame liftoff height of diffusion/partially premixed jet flames and modeling of mild combustion burners

In this article, a new flame extinction model based on the k/epsilon turbulence time scale concept is proposed to predict the flame liftoff heights over a wide range of coflow temperature and O-2 mass fraction of the coflow. The flame is assumed to be quenched, when the fluid time scale is less than the chemical time scale ( Da < 1). The chemical time scale is derived as a function of temperature, oxidizer mass fraction, fuel dilution, velocity of the jet and fuel type. The present extinction model has been tested for a variety of conditions: ( a) ambient coflow conditions ( 1 atm and 300 K) for propane, methane and hydrogen jet flames, ( b) highly preheated coflow, and ( c) high temperature and low oxidizer concentration coflow. Predicted flame liftoff heights of jet diffusion and partially premixed flames are in excellent agreement with the experimental data for all the simulated conditions and fuels. It is observed that flame stabilization occurs at a point near the stoichiometric mixture fraction surface, where the local flow velocity is equal to the local flame propagation speed. The present method is used to determine the chemical time scale for the conditions existing in the mild/ flameless combustion burners investigated by the authors earlier. This model has successfully predicted the initial premixing of the fuel with combustion products before the combustion reaction initiates. It has been inferred from these numerical simulations that fuel injection is followed by intense premixing with hot combustion products in the primary zone and combustion reaction follows further downstream. Reaction rate contours suggest that reaction takes place over a large volume and the magnitude of the combustion reaction is lower compared to the conventional combustion mode. The appearance of attached flames in the mild combustion burners at low thermal inputs is also predicted, which is due to lower average jet velocity and larger residence times in the near injection zone.