950 resultados para atributos químicos e físicos


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The use of irrigation systems that consume lower water and energy in agriculture is important to supply the growing global demand for food. In this way, it's important to develop techniques that will increase the uniformity of water application on drip irrigation systems. The aim of the work was to compare the provision of lateral lines in drip irrigation, through the formation of wet bulbs in soil and physical parameters of radish, composed of single spacing between drippers in relation to lateral lines composed of two segments, each one composed by different spacing between emitters. Two distributions of evaluation were carried out: 1) conventional drip lateral lines with 20 cm emitter spacing were compared to proposed drip lines, with 24 emitter spacing in the initial section and 20 cm emitter spacing in the final section; 2) conventional drip lateral lines with 30 cm emitter spacing were compared to proposed drip lines, with 36 emitter spacing in the initial section and 30 cm emitter spacing in the final section. The experiment was carried out in a greenhouse of the Sao Manuel Experimental Farm, located at Sao Manuel, SP. The experimental design was entirely randomized, with six treatments and four replications. Results showed no difference among treatments for the most of the evaluated variables. So it is possible to conclude that the use of different spacing between emitters in the same lateral line can be used to increase the line length.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study aims to evaluate the effect of fungicides and antibiotics to control bacterial spot (Xanthomonas perforans) in tomato, and the activation of pathogenesis-related proteins. Hybrid tomato AP 529 was used to assess the severity of disease. The treatments consisted of spraying with acibenzolar-S-methyl, fluazinam, pyraclostrobin, pyraclostrobin + methiran, copper oxychloride, copper oxychloride and mancozeb + oxytetracycline, and inoculated and non-inoculated controls. After three days of treatment, all plants were inoculated with X. perforans (10 6 CFU / mL). Leaf discs were collected for assessment of peroxidase, polyphenol oxidase, β-1,3 glucanase, phenylalanine ammonia lyase and protease. The area under the disease progress curve (AUDPC) was calculated with the data of severity. All treatments had reduced AUDPC compared to the inoculated control. Fungicides acibenzolar-S-methyl, pyraclostrobin, and pyraclostrobin + methiran had more satisfactory results in reducing the severity of bacterial spot on tomato. The products based on pyraclostrobin together with acibenzolar-S-methyl induced enzymatic activities of peroxidase, polyphenoloxidase and β-1,3 glucanase, indicating that these products may be related to the induction of resistance to bacterial spot on tomato plants.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this trial was to evaluate the effect of the addition of chemical and bacterial additive in the ensiling of sugar cane (Saccharum officinarum L.) on chemical composition, pH, kinectic fraction and in situ degradation of nutritions components of silages. Five rumen-cannulated 1/2 Simental + 1/2 Zebu steers were allotted to a completely randomized design. The steers were placed in individual cages and they were fed with diets with 76% forage (%DM). Five silages were evaluated: control - sugar cane, no additives; urea - sugar cane + 0.5% of urea (wet basis); inoculant - sugar cane inoculated with LactoSilo® (390 g/40 t forage); NaOH - sugar cane + 1.0% of sodium hydroxide (wet basis); CaOH - sugar cane + 0.6% of calcium hydroxide (wet basis). The silage additives with sodium hydroxide showed the highest pH values before (11.20) and after (4.87) for silage. No differences were observed among the silages for dry matter (26.85), crude protein (5.25) and acid detergent fiber (57.21). Fractionation of dry matter and organic matter of silages showed similar behavior, with higher values of the soluble fraction (fraction A) for silages with sodium hydroxide (45.86 and 30.95%) and calcium hydroxide (29.47 and 26.13%). The use of sodium hydroxide allowed obtaining higher values for the degradation of cell wall components of silages from cane sugar. The potencial and effective degradability with 3, 5 and 8%/h of passage rate were respectively 88.44, 64.45, 56.73 and 49.83% for NDF and 82.57, 55.51, 46.72 and 38.83% for ADF, indicating that the use of sodium hydroxide as chemical additives can improve the nutritive value of cane sugar silage.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Environmental factors are important in agriculture and need to be considered for getting good degree of development and reasonable efficiency, by reducing their operating costs. To this end, land use shall be appropriated to the conditions offered by the physical elements of the landscape. By facing such questions, this paper aims is to present of mapping the ability of land use of the hydrographic basins Cavalheiro Stream basin (in the city of Analândia - São Paulo State - Brazil) which presents serious erosion problems. Besides it aims to assess if the current land use in this area is consistent with the identified land use ability. For this we have made a cartographic document that spatializes the various classes of usability and its main restrictions. The correlative analysis between that document and land use data showed that Cavalheiro Stream's current use is predominantly inappropriate with the usability of land, which was identified from the physical attributes of the studied area, except for a few sites that are used for forestry and pasture placed in Western, Eastern and Central-South.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Soil attributes reflect influence of the geomorphic surfaces. Therefore, the objective of this work was to investigate the influence of the geomorphic surfaces on soil attributes in a topossequence from low lands to high lands in the Humaitá region, AM. A transect of 4.5 km, from the top of the slope towards the low lands was established and the geomorphic surfaces were identified and limited according to topographic and estratigraphic criteria, based on detailed field investigation. Twenty soil samples were collected in each one of the slope segments within the geomorphic surfaces (G.S.), at the following depths: G.S. I: LAa (0.0-0.16 and 0.48-0.79 m); G.S. II: Lad1 (0.0-0.13 and 0.44-0.70) and Lad2 (0.0-0.10 and 0.30-0.55 m); G.S. III: RYve1 (0.0-0.18 and 0.51-0.89) and RYve2 (0.0-0.23 and 0.58-0.91 m). The sampling depths were determined by the surface and subsurface horizon depths, defined during the soil morphological description. Physical analysis involved particle size distribution, disperse clay, soil and particle density and total porosity. The chemical analysis involved determinations of pH in water and KCl, exchangeable cations, exchangeable Al, total acidity (H+Al), available P, organic carbon. The relief variations contributed to the presence of dystrophic soils in the geomorphic surface I and eutrophic soils in the geomorphic surface III. The multivariate statistical techniques were able to separate three heterogeneous groups, equivalent to the mapped geomorphic surfaces.