Simulation-based input loading condition optimisation of airport baggage handling systems

Scheduling check-in station operations are a challenging problem within airport systems. Prior to determining check-in resource schedules, an important step is to estimate the Baggage Handling System (BHS) operating capacity under non-stationary conditions. This ensures that check-in stations are not overloaded with bags, which would adversely affect the system and cause cascade stops and blockages. Cascading blockages can potentially lead to a poor level of service and in worst scenario a customer may depart without their bags. This paper presents an empirical study of a multiobjective problem within a BHS system. The goal is to estimate near optimal input operating conditions, such that no blockages occurs at check-in stations, while minimising the baggage travel time and maximising the throughput performance measures. We provide a practical hybrid simulation and binary search technique to determine a near optimal input throughput operating condition. The algorithm generates capacity constraint information that may be used by a scheduler to plan check-in operations based on flight arrival schedules.

Effects of vegetarianism and exercise on muscle creatine loading and gene expression

The results of this thesis indicate that vegetarianism and prior exercise can increase skeletal muscle creatine loading. The mechanisms by which these phenomena occur remain unknown but may be related to changes in the gene expression of a cellular pump within the muscle known as the "creatine transporter".

CAE crash analysis of structures in oblique loading

This work focussed on how tubular steel structures similar to that in frontal car frames deform under crash conditions. The novelty comes from finding three crash modes: axial crush, transitional and global bending. Each mode was categorised by reaction force and energy absorption, this allowing for better structural design practices.

Directional water-transfer through fabrics induced by asymmetric wettability

Fabrics having an interesting unidirectional water-transfer effect have been prepared by a special coating technique to create a wettability gradient across the fabric thickness, and the treated fabrics also show considerably different breakthrough pressures on the two fabric sides.

Adhesion performance of polymer nanofibres under shear loading

Geckos have extraordinary wall-climbing ability because of the millions of hairs with micro/nano fibrillar structures on their feet. Mimicking gecko's feet is of scientific and engineering importance for development of physical adhesion materials and devices. The design of gecko-inspired physical adhesives seems to be geometry dominated. In this study, Finite Element Method (FEM) has been used to analyse the vertical peel-off force of polyporpylene (PP) nanofibres having different fibre dimensions, inclining angels and contact areas on a flat glass substrate. It has been found that the main parameters affecting the frictional adhesion are fibre diameter and fibre aspect ratio, the inclining angle between the fibre and the substrate surface, and the intimate contact areas. Our analysis has shown that PP nanofibres with a diameter of less than 200nm can generate less peel-off force than fibres of larger diameters, indicating more stable adhesion with the glass substrate for thinner fibres. A bent fibre with more intimate contact area can bear more shear force than a straight fibre with less contact area. Also, under the same shear loading, fibres with an inclining angle of less than 30° provide a low peel off force.

Formulation optimization for high drug loading colonic drug delivery carrier

High drug loading (DL) carrier is an effective way to cure the cancerous cells. High drug loading is also one of the key issues in the drug delivery research, especially the colonic drug delivery system by oral administration. The times of drug intake could be remarkably reduced if high drug loading carriers are administered. At the same time, the related formulation materials could be effectively utilized. One major obstacle with the preparation of this system is the difficulty to encapsulate the hydrophilic drug into hydrophobic encapsulation polymer. A design of high drug loading delivery system with biodegradable, biocompatible materials and optimization of the fabrication process is a potential solution to solve the problem. So in this research, 5-Fluorouracil (5-FU) loaded Poly (lactide-co-glycolide) (PLGA) nanoparticles were prepared by double emulsion and solvent evaporation method. Several fabrication parameters including theoretical drug loading, volume ratio of outer water phase to the first emulsion, pH value of outer aqueous phase and emulsifier PVA concentration were optimized to get a high drug loading nanoparticles. The result shows that with the increase of theoretical drug loading, the actual drug loading increased gradually. When adjusted the pH value of outer aqueous phase to the isoelectric point (8.02) of 5-Fluorouracil, the drug loading exhibited a higher one compared to other pH value solution. Relative higher volume ratio of outer water phase to the first emulsion was also beneficial for the enhancement of drug loading. But the nanoparticles size increased simultaneously due to the lower shearing force. When increased the PVA concentration, the drug loading showed an increase first and following a drop.

Exercise loading and cortical bone distribution at the tibial shaft

Cortical bone is not a uniform tissue, and its apparent density [cortical volumetric density (vBMD)] varies around the bone cross-section as well as along the axial length of the bone. It is not yet known, whether the varying vBMD distribution is attributable to modulation in the predominant loads affecting bone. The aim of the present study was to compare the cortical bone mass distribution through the bone cortex (radial distribution) and around the center of mass (polar distribution) among 221 premenopausal women aged 17–40 years representing athletes involved in high impact, odd impact, high magnitude, repetitive low impact, repetitive non-impact sports and leisure time physical activity (referent controls). Bone cross-sections at the tibial mid-diaphysis were assessed with pQCT. Radial and polar vBMD distributions were analyzed in three concentric cortical divisions within the cortical envelope and in four cortical sectors originating from the center of the bone cross-section. MANCOVA, including age as a covariate, revealed no significant group by division/sector interaction in either radial or polar distribution, but the mean vBMD values differed between groups (P < 0.001). The high and odd-impact groups had 1.2 to 2.6% (P < 0.05) lower cortical vBMD than referents, in all analyzed sectors/divisions. The repetitive, low-impact group had 0.4 to 1.0% lower (P < 0.05) vBMD at the mid and outer cortical regions and at the anterior sector of the tibia. The high magnitude group had 1.2% lower BMD at the lateral sector (P < 0.05). The present results generate a hypothesis that the radial and polar cortical bone vBMD distributions within the tibial mid-shaft are not modulated by exercise loading but the mean vBMD level is slightly affected.

Estimating the contribution of carnivorous waterbirds to nutrient loading in freshwater habitats

1. We estimated nitrogen (N) and phosphorus (P) loading into wetlands by carnivorous waterbirds with alternative physiological models using a food-intake and an excreta-production approach. The models were applied for non-breeding and breeding Dutch inland carnivorous waterbird populations to quantify their contribution to nutrient loading on a landscape scale.

2. Model predictions based on food intake exceeded those based on excretion by 59–62% for N and by 2–36% for P, depending on dietary assumptions. Uncertainty analysis indicated that the intake model was most affected by errors in energy requirement, while the excretion model was dependent on faecal nutrient composition.

3. Per capita loading rate of non-breeders increased with body mass from 0.3–0.8 g N day⁻¹ and 0.15 g P day⁻¹ in little gulls Larus minutus to 4.5–11.5 g N day⁻¹ and 2.1–3.2 g P day⁻¹ in great cormorants Phalacrocorax carbo. For breeding birds, the estimated nutrient loading by a family unit over the entire breeding period ranged between 17.6–443.0 g N and 8.6 g P for little tern Sterna albifrons to 619.6–1755.6 g N and 316.2–498.1 g P for great cormorants.

4. We distinguished between external (i.e. importing) and internal (i.e. recycling) nutrient loading by carnivorous waterbirds. For the Netherlands, average external-loading estimates ranged between 38.1–91.5 tonnes N and 16.7–18.2 tonnes P per year, whilst internal-loading estimates ranged between 53.1–140.5 tonnes N and 25.2–39.2 tonnes P and per year. The average contribution of breeding birds was estimated to be 17% and 32% for external and internal loading respectively. Most important species were black-headed gull Larus ridibundus and mew gull Larus canus for external loading, and great cormorant and grey heron Ardea cinerea for internal loading.

5. On a landscape scale, loading by carnivorous waterbirds was of minor importance for freshwater habitats in the Netherlands with 0.26–0.65 kg N ha⁻¹ a⁻¹ and 0.12–0.16 kg P ha⁻¹ a⁻¹. However, on a local scale, breeding colonies may be responsible for significant P loading.

Effects of lifetime loading history on cortical bone density and its distribution in middle-aged and older men

We have reported previously that long-term participation of weight-bearing exercise is associated with increased QCT-derived cortical bone size and strength in middle-aged and older men, but not whole bone cortical volumetric BMD. However, since bone remodeling and the distribution of loading-induced strains within cortical bone are non-uniform, the aim of this study was to examine the effects of lifetime loading history on cortical bone mass distribution and bone shape in healthy community dwelling middle-aged and older men. We used QCT to assess mid-femur and mid-tibia angular bone mass distribution around its center (polar distribution), the bone density distribution through the cortex (radial distribution), and the ratio between the maximum and minimum moments of inertia (I_max/I_min ratio) in 281 men aged 50 to 79 years. Current (> 50 years) and past (13–50 years) sport and leisure time activity was assessed by questionnaire to calculate an osteogenic index (OI) during adolescence and adulthood. All men were then categorized into a high (H) or low/non impact (L) group according to their OI scores in each period. Three contrasting groups were then formed to reflect weight-bearing impact categories during adolescence and then adulthood: H–H, H–L and L–L. For polar bone mass distribution, bone deposition in the anterolateral, medial and posterior cortices were 6–10% greater at the mid-femur and 9–24% greater at mid-tibia in men in the highest compared to lowest tertile of lifetime loading (p < 0.01– < 0.001). When comparing the influence of contrasting loading history during adolescence and adulthood, there was a graded response between the groups in the distribution of bone mass at the anterior-lateral and posterior regions of the mid-tibia (H–H > H–L > L–L). For radial bone density distribution, there were no statistically significant effects of loading at the mid-femur, but a greater lifetime OI was associated with a non-significant 10–15% greater bone density near the endocortical region of the mid-tibia. In conclusion, a greater lifetime loading history was associated with region-specific adaptations in cortical bone density.

Direction-specific diaphyseal geometry and mineral mass distribution of tibia and fibula: A pQCT study of female athletes representing different exercise loading types

Bones adapt to prevalent loading, which comprises mainly forces caused by muscle contractions. Therefore, we hypothesized that similar associations would be observed between neuromuscular performance and rigidity of bones located in the same body segment. These associations were assessed among 221 premenopausal women representing athletes in high-impact, odd-impact, highmagnitude, repetitive low-impact, and repetitive nonimpact sports and physically active referents aged 17–40 years. The whole group mean age and body mass were 23 (5) and 63 (9) kg, respectively. Bone cross sections at the tibial and fibular mid-diaphysis were assessed with peripheral quantitative computed tomography (pQCT). Density-weighted polar section modulus (SSI) and minimal and maximal crosssectional moments of inertia (Imin, Imax) were analyzed. Bone morphology was described as the Imax/Imin ratio. Neuromuscular performance was assessed by maximal power during countermovement jump (CMJ). Tibial SSI was 31% higher in the high-impact, 19% in the odd-impact, and 30% in the repetitive low-impact groups compared with the reference group (P\0.005). Only the high-impact group differed from the referents in fibular SSI (17%, P\0.005). Tibial morphology differed between groups (P = 0.001), but fibular morphology did not (P = 0.247). The bone-bygroup interaction was highly significant (P\0.001). After controlling for height, weight, and age, the CMJ peak power correlated moderately with tibial SSI (r = 0.31, P\0.001) but not with fibular SSI (r = 0.069, P = 0.313). In conclusion, observed differences in the association between neuromuscular performance and tibial and fibular traits suggest
that the tibia and fibula experience different loading

Textural fractography of fatigue failures under variable cycle loading

A new concept of counting time at fatigue processes is proposed, aimed to reach fractographic compatibility in cases of different loading sequences. Values of cycle effectivity are summarized to give the new reference time. The improvement is shown in application - textural fractography of three specimens loaded by constant cycle, constant cycle with periodic overloading, and a random block, respectively. In contrast to the conventional crack growth rate, the reference crack growth rate is related to common morphologic features of all fracture surfaces.

Fabrication of ZnO/SiO2 composite nanospheres with high core-loading levels

Monodispersed silica shell / zinc oxide core composite nanospheres were prepared in an oil-in-water microemulsion system. By using cyclohexane as the oil phase and Triton X-100 as the surfactant, nanospheres with a high core loading level and high monodispersity were obtained. The silica coating greatly reduced the photoactivity of ZnO nanoparticles, offering safe and durable applications of ZnO as UV screening agents.