Advanced welding technologies used for arctic metal structures

Rapid depletion of easy-to-access fossil fuel, predominantly, oil and gas resources has now necessitated increase in need to develop new oil and gas sources in ever more remote and hostile environments. This is necessary in order to explore more oil and gas resources to meet rapidly rising long-term energy demand in the world, both at present and in the nearest future. Arctic is one of these harsh environments, where enormous oil and gas resources are available, containing about 20% of the world total oil and gas, but the environmental conditions are very harsh and hostile. However, virtually all the facilities required for the exploration and development of this new energy source are constructed with metals as well as their alloys and are predominantly joined together by welding processes and technologies. Meanwhile, due to entirely different environment from the usual moderate temperate region, conventional welding technologies, common metals and their alloys cannot be applied as this Arctic environment demand metals structures with very high toughness and strength properties under extremely low temperature. This is due to the fact that metals transit from ductility to brittleness as the temperature moves toward extreme negative values. Hence, this research work investigates and presents the advanced welding technologies applicable to Arctic metal structures which can give satisfactory weldments under active Arctic service conditions. .

Strategic alliances as an international entry strategy: Finnish cleantech SMEs and the Indian market

The demand for environmental technologies, also called cleantech, is growing globally but the need is especially high in emerging markets such as India where the rising economy and rapid industrialisation have led to increasing energy needs and environmental degradation. The market is of great potential also for the Finnish cleantech cluster that represents advanced expertise in several fields of environmental technologies. However, most of the Finnish companies in the field are SMEs that face challenges in their internationalisation due to their limited resources. The objective of this study was to estimate, whether strategic alliances could be an efficient entry strategy for Finnish cleantech SMEs entering the Indian market. This was done by studying what are the key factors influencing the international entry mode decision of Finnish cleantech SMEs, what are the major factors affecting the entry of Finnish cleantech SMEs to the Indian market and how do Finnish cleantech SMEs use strategic alliances in their internationalisation process. The study was realised as a qualitative multi-case study through theme interviews of Finnish cleantech SME representatives. The results indicated that Finnish cleantech SMEs prefer to enter international markets through non-equity and collaborative modes of entry. These entry modes are chosen because of the small size and limited resources of companies, but also because they want to protect their innovative technologies from property rights violations. India is an attracting market for Finnish cleantech SMEs mainly because of its size and growth, but insufficient environmental regulation and high import tariffs have hindered entry to the market. Finnish cleantech SMEs commonly use strategic alliances in their internationalisation process but the use is rather one-sided. Most of the formed strategic alliances are low-commitment, international contractual agreement in sales and distribution. Alliance partner selection receives less attention. In the future, providing Finnish cleantech SMEs with international experience and training could help in diversifying the use of strategic alliances and increase their benefits to SME internationalisation.

An alternative experimental model for training in microsurgery

OBJECTIVE: to describe a new model of training in microsurgery with pig spleen after splenectomy performed by undergraduate students of the Discipline of Operative Technique of the UFPR Medical School. METHODS: after the completion of splenectomy we performed dissection of the vascular pedicle, distal and proximal to the ligation performed for removal of the spleen. After complete dissection of the splenic artery and vein with microscope, clamps were placed and the vessels were cut. We then made the anastomosis of the vessels with 9.0 nylon. RESULT: the microsurgical training with a well-defined routine, qualified supervision and using low cost experimental materials proved to be effective in the practice of initial microvascular surgery. CONCLUSION: the use of pig spleen, which would be discarded after splenectomy, is an excellent model for microsurgical training, since besides having the consistency and sensitivity of a real model, it saves the sacrifice of a new animal model in the initial learning phase of this technique.

Low-fidelity bench models for basic surgical skills training during undergraduate medical education

It is remarkable the reduction in the number of medical students choosing general surgery as a career. In this context, new possibilities in the field of surgical education should be developed to combat this lack of interest. In this study, a program of surgical training based on learning with models of low-fidelity bench is designed as a complementary alternative to the various methodologies in the teaching of basic surgical skills during medical education, and to develop personal interests in career choice.

Trauma leagues: an alternative way to teach trauma surgery to medical students

OBJECTIVE: to compare the knowledge of medical students between those who are members of the Trauma League (TL) and those from a non-Trauma League (NTL) group of the Federal University of Espírito Santo (UFES).METHODS: cross-sectional, analytical and descriptive study. Two knowledge tests, with 30 questions each, were applied to students from 3rd to 12th period, randomly selecting five students per period, with 50 students in the TL group and 50 in NTL. The questionnaire topics were: pre-hospital care, the mnemonic ABCDE trauma sequence, advanced trauma and imaging. The students' performances were evaluated by graduation-period group: basic (3rd-5th period), intermediary/clinical (6th-8th) and internship (9th-12th).RESULTS: in the first test the average accuracy of the TL group was 20.64 ± 3.17, while for the NTL group, it was 14.76 ± 5.28 (p<0.005). In the second test the average accuracy for the TL group was 21.52 ± 3.64, while for the NTL group, the average was 15.36 ± 29.5 (p<0.005). When divided into graduation periods, it was observed that the TL group showed a higher average across all three groups (p<0.05) in both tests.CONCLUSION: the students who attended the academic league activities have greater knowledge of the issues that are considered relevant to patient trauma care. In all periods of undergraduate academic training, the TL group had greater knowledge of the subject than the NTL group.

Esophagectomy with gastroplasty in advanced megaesophagus: late results of omeprazole use

Objective: To analyze the late results of advanced Chagasic megaesophagus treatment by esophagectomy associated with the use of proton pump inhibitor (omeprazole) as for the incidence of esophagitis and Barrett's esophagus in the remaining stump. Methods : We studied patients with advanced megaesophagus undergoing esophagectomy and transmediastinal esophagogastroplasty. Patients were divided into three groups: A (20) with esophageal replacement by full stomach, without the use of omeprazole; B (20) with esophageal replacement by full stomach, with omeprazole 40 mg/day introduced after the first postoperative endoscopy and maintained for six years; and C (30) with esophageal replacement by gastric tube with use of omeprazole. Dysphagia, weight loss and BMI were clinical parameters we analyzed. Upper gastrointestinal endoscopy was performed in all patients, and determined the height of the anastomosis, the aspect of the mucosa, with special attention to possible injuries arising from gastroesophageal reflux, and the patency of the esophagogastric anastomosis. Results : We studied 50 patients, 28 males (56%) and 22 (44%) females. All underwent endoscopy every year. In the first endoscopy, erosive esophagitis was present in nine patients (18%) and Barrett's esophagus, in four (8%); in the last endoscopy, erosive esophagitis was present in five patients (8%) and Barrett's esophagus in one (2%). When comparing groups B and C, there was no evidence that the manufacturing of a gastric tube reduced esophagitis and Barrett's esophagus. However, when comparing groups A and C, omeprazole use was correlated with reduction of reflux complications such as esophagitis and Barrett's esophagus (p <0.005). Conclusion : The use of omeprazole (40 mg/day) reduced the onset of erosive esophagitis and Barrett's esophagus during the late postoperative period.

Device model for training of laparoscopic surgical skills

The authors present a especially constructed, lightweight, collapsible, portable and low cost model device for skills training in laparoscopic.

Teaching project: a low-cost swine model for chest tube insertion training

Objective: to describe and evaluate the acceptance of a low-cost chest tube insertion porcine model in a medical education project in the southwest of Paraná, Brazil. Methods: we developed a low-cost and low technology porcine model for teaching chest tube insertion and used it in a teaching project. Medical trainees - students and residents - received theoretical instructions about the procedure and performed thoracic drainage in this porcine model. After performing the procedure, the participants filled a feedback questionnaire about the proposed experimental model. This study presents the model and analyzes the questionnaire responses. Results: seventy-nine medical trainees used and evaluated the model. The anatomical correlation between the porcine model and human anatomy was considered high and averaged 8.1±1.0 among trainees. All study participants approved the low-cost porcine model for chest tube insertion. Conclusion: the presented low-cost porcine model for chest tube insertion training was feasible and had good acceptability among trainees. This model has potential use as a teaching tool in medical education.

Training executive functions in the laboratory and in real life : cognitive consequences of computer-based exercises and bilingualism

The question of the trainability of executive functions and the impact of such training on related cognitive skills has stirred considerable research interest. Despite a number of studies investigating this, the question has not yet been solved. The general aim of this thesis was to investigate two very different types of training of executive functions: laboratory-based computerized training (Studies I-III) and realworld training through bilingualism (Studies IV-V). Bilingualism as a kind of training of executive functions is based on the idea that managing two languages requires executive resources, and previous studies have suggested a bilingual advantage in executive functions. Three executive functions were studied in the present thesis: updating of working memory (WM) contents, inhibition of irrelevant information, and shifting between tasks and mental sets. Studies I-III investigated the effects of computer-based training of WM updating (Study I), inhibition (Study II), and set shifting (Study III) in healthy young adults. All studies showed increased performance on the trained task. More importantly, improvement on an untrained task tapping the trained executive function (near transfer) was seen in Study I and II. None of the three studies showed improvement on untrained tasks tapping some other cognitive function (far transfer) as a result of training. Study I also used PET to investigate the effects of WM updating training on a neurotransmitter closely linked to WM, namely dopamine. The PET results revealed increased striatal dopamine release during WM updating performance as a result of training. Study IV investigated the ability to inhibit task-irrelevant stimuli in bilinguals and monolinguals by using a dichotic listening task. The results showed that the bilinguals exceeded the monolinguals in inhibiting task-irrelevant information. Study V introduced a new, complementary research approach to study the bilingual executive advantage and its underlying mechanisms. To circumvent the methodological problems related to natural groups design, this approach focuses only on bilinguals and examines whether individual differences in bilingual behavior correlate with executive task performances. Using measures that tap the three above-entioned executive functions, the results suggested that more frequent language switching was associated with better set shifting skills, and earlier acquisition of the second language was related to better inhibition skills. In conclusion, the present behavioral results showed that computer-based training of executive functions can improve performance on the trained task and on closely related tasks, but does not yield a more general improvement of cognitive skills. Moreover, the functional neuroimaging results reveal that WM training modulates striatal dopaminergic function, speaking for training-induced neural plasticity in this important neurotransmitter system. With regard to bilingualism, the results provide further support to the idea that bilingualism can enhance executive functions. In addition, the new complementary research approach proposed here provides some clues as to which aspects of everyday bilingual behavior may be related to the advantage in executive functions in bilingual individuals.

Advanced ceramics: evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the h max can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Pulsed corona discharge as an advanced oxidation process for degradation of organic

Advanced oxidation processes (AOPs) have been studied and developed to suffice the effective removal of refractory and toxic compounds in polluted water. The quality and cost of wastewater treatment need improvements, and electric discharge technology has a potential to make a significant difference compared to other established AOPs based on energy efficiency. The generation of active oxidant species such as ozone and hydroxyl radicals by high voltage discharge is a relatively new technology for water treatment. Gas-phase pulsed corona discharge (PCD), where a treated aqueous solution is dispersed between corona-producing electrodes free of the dielectric barriers, was developed as an alternative approach to the problem. The short living radicals and ozone formed in the gas phase and at the gas-liquid interface react with dissolved impurities. PCD equipment has a relatively simple configuration, and with the reactor in an enclosed compartment, it is insensitive towards gas humidity and does not need the gas transport. In this thesis, PCD was used to study and evaluate the energy efficiency for degrading various organic compounds, as well as the chemistry of the oxidation products formed. The experiments investigate the aqueous oxidation of phenol, humic substances, pharmaceutical compounds (paracetamol, ibuprofen, indomethacin, salicylic acids, -estradiol), as well as lignin degradation and transformation to aldehydes. The study aims to establish the influence of initial concentration of the target pollutant, the pulsed discharge parameters, gas phase composition and the pH on the oxidation kinetics and the efficiency. Analytical methods to measure the concentrations of the target compounds and their by-products include HPLC, spectrophotometry, TOC and capillary electrophoresis. The results of the research included in this summary are presented in the attached publications and manuscripts accepted for publication. Pulsed corona discharge proved to be highly effective in oxidizing each of the target compounds, surpassing the closest competitor, conventional ozonation. The increase in oxidation efficiencies for some compounds in oxygen media and at lower pulse repetition frequencies shows a significant role of ozone. The role of the ·OH radicals was established in the surface reactions. The main oxidation products, formation of nitrates, and the lignin transformation were quantified. A compound specific approach is suggested for optimization of the PCD parameters that have the most significant impact on the oxidation energy efficiency because of the different characteristics and responses of the target compound to the oxidants, as well as different admixtures that are present in the wastewater. Further studies in the method’s safety (nitration and nitrosation of organic compounds, nitrite and nitrate formation enhancement) are needed for promoting the method.