A Microscopic Study of Iron and Manganese Oxide Distribution in Soils from East Tennessee (U.S.A.)

Soils and saprolites developed from interbedded shales and limestones of the Conasauga Group are widespread in the Valley and Ridge Province of East Tennessee. Thin sections from four soil profiles were examined by petrographic and scanning electron microscopy including backscatter electron and energy-dispersive X-ray analyses. Iron and manganese released by weathering had migrated differentially downward and precipitated as crystalline and noncrystalline oxides. Oxides were observed as nodules, granular particulates, pore fillings, and coatings on other minerals, packing voids, vesicles, channels, and chambers. Iron oxides formed predominantly as coatings on packing-void walls and on laminated clays in vesicles and channels. Manganese oxides occurred as an early replacement phase of packing voids and of fracture-filling carbonate minerals. Iron oxides were dominant in moderately well-drained and oxidized horizons of the soil solum, whereas manganese oxides were abundant in the oxidized and moderately leached saprolite zone where the water table fluctuates seasonally. Therefore, a manganese enrichment zone, on a bulk soil basis, occurred generally below the iron oxide zone in the soil profile. Such differential migration and accumulation of iron and manganese have been controlled by localized soil microenvironments. Micromorphologic features observed in this study are important in land-use evaluation for hazardous waste disposal. © 1990.

Experimental design and batch experiments for optimization of Cr(VI) removal from aqueous solutions by hydrous cerium oxide nanoparticles

Hydrous cerium oxide (HCO) was synthesized by intercalation of solutions of cerium(III) nitrate and sodium hydroxide and evaluated as an adsorbent for the removal of hexavalent chromium from aqueous solutions. Simple batch experiments and a 2⁵ factorial experimental design were employed to screen the variables affecting Cr(VI) removal efficiency. The effects of the process variables; solution pH, initial Cr(VI) concentration, temperature, adsorbent dose and ionic strength were examined. Using the experimental results, a linear mathematical model representing the influence of the different variables and their interactions was obtained. Analysis of variance (ANOVA) demonstrated that Cr(VI) adsorption significantly increases with decreased solution pH, initial concentration and amount of adsorbent used (dose), but slightly decreased with an increase in temperature and ionic strength. The optimization study indicates 99% as the maximum removal at pH 2, 20 °C, 1.923 mM of metal concentration and a sorbent dose of 4 g/dm³. At these optimal conditions, Langmuir, Freundlich and Redlich–Peterson isotherm models were obtained. The maximum adsorption capacity of Cr(VI) adsorbed by HCO was 0.828 mmol/g, calculated by the Langmuir isotherm model. Desorption of chromium indicated that the HCO adsorbent can be regenerated using NaOH solution 0.1 M (up to 85%). The adsorption interactions between the surface sites of HCO and the Cr(VI) ions were found to be a combined effect of both anion exchange and surface complexation with the formation of an inner-sphere complex.

Intensity Enhancement of O VI Ultraviolet Emission Lines in Solar Spectra due to Opacity

Opacity is a property of many plasmas. It is normally expected that if an emission line in a plasma becomes optically thick, then its intensity ratio to that of another transition that remains optically thin should decrease. However, radiative transfer calculations undertaken both by ourselves and others predict that under certain conditions the intensity ratio of an optically thick to an optically thin line can show an increase over the optically thin value, indicating an enhancement in the former. These conditions include the geometry of the emitting plasma and its orientation to the observer. A similar effect can take place between lines of differing optical depths. While previous observational studies have focused on stellar point sources, here we investigate the spatially resolved solar atmosphere using measurements of the I(1032 Å)/I(1038 Å) intensity ratio of O VI in several regions obtained with the Solar Ultraviolet Measurements of Emitted Radiation instrument on board the Solar and Heliospheric Observatory satellite. We find several I(1032 Å)/I(1038 Å) ratios observed on the disk to be significantly larger than the optically thin value of 2.0, providing the first detection (to our knowledge) of intensity enhancement in the ratio arising from opacity effects in the solar atmosphere. The agreement between observation and theory is excellent and confirms that the O VI emission originates from a slab-like geometry in the solar atmosphere, rather than from cylindrical structures.

Radiative rates for E1, E2, M1, and M2 transitions in the Br-like ions Sr IV, Y V, Zr VI, Nb VII, and Mo VIII

Energies and lifetimes are reported for the lowest 375 levels of five Br-like ions, namely SrIV, YV, ZrVI, NbVII, and MoVIII, mostly belonging to the 4s²4p⁵, 4s²4p⁴4ℓ, 4s4p⁶, 4s²4p⁴5ℓ, 4s²4p³4d², 4s4p⁵4ℓ, and 4s4p⁵5ℓ configurations. Extensive configuration interaction has been included and the general-purpose relativistic atomic structure package (grasp) has been adopted for the calculations. Additionally, radiative rates are listed among these levels for all E1, E2, M1, and M2 transitions. From a comparison with the measurements, the majority of our energy levels are assessed to be accurate to better than 2%, although discrepancies between theory and experiment for a few are up to 6%. An accuracy assessment of the calculated radiative rates (and lifetimes) is more difficult, because no prior results exist for these ions.

Energy levels and radiative rates for transitions in Ti VI

We report on calculations of energy levels, radiative rates, oscillator strengths and line strengths for transitions among the lowest 253 levels of the (1s22s22p6 ) 3s23p5 , 3s3p6 , 3s23p43d, 3s3p53d, 3s23p33d2 , 3s23p44s, 3s23p44p and 3s23p44d configurations of Ti VI. The general-purpose relativistic atomic structure package and flexible atomic code are adopted for the calculations. Radiative rates, oscillator strengths and line strengths are reported for all electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2) and magnetic quadrupole (M2) transitions among the 253 levels, although calculations have been performed for a much larger number of levels. Comparisons are made with existing available results and the accuracy of the data is assessed. Additionally, lifetimes for all 253 levels are listed, although comparisons with other theoretical results are limited to only 88 levels. Our energy levels are estimated to be accurate to better than 1% (within 0.03 Ryd), whereas results for other parameters are probably accurate to better than 20%. A reassessment of the energy level data on the National Institute of Standards and Technology website for Ti VI is suggested.

Mitigation of concrete cover separation in frpstrengthened RC beams using FRP U-jackets

Concrete cover separation is a common failure mode of reinforced concrete (RC) beams strengthened with a fibre-reinforced polymer (FRP) plate bonded to the tension face (FRP-plated RC beams). Plate-end FRP U-jackets have previously been explored as a mitigation measure to delay or suppress concrete cover separation, although its effectiveness needs further clarification. The paper presents the first systemic experimental study on the use of FRP U-jackets of different forms for mitigating the concrete cover separation failure. A total of ten full-scale FRP-plated RC beams were tested. The test results show that both the ultimate load and the ductility of the beams were enhanced by the U-jackets. Among the forms of U-jackets explored, those inclined at 45o are the most effective.

Quantification of Type VI secretion system activity in macrophages infected with Burkholderia cenocepacia

The Gram-negative bacterial type VI Secretion System (T6SS) delivers toxins to kill orinhibit the growth of susceptible bacteria, while others target eukaryotic cells. Deletionof atsR, a negative regulator of virulence factors in B. cenocepacia K56-2, increasesT6SS activity. Macrophages infected with a K56-2 ΔatsR mutant display dramaticalterations in their actin cytoskeleton architecture that rely on the T6SS, which isresponsible for the inactivation of multiple Rho-family GTPases by an unknownmechanism. We employed a strategy to standardize the bacterial infection ofmacrophages and densitometrically quantify the T6SS-associated cellular phenotype,which allowed us to characterize the phenotype of systematic deletions of each genewithin the T6SS cluster and ten vgrG encoding genes in K56-2 ΔatsR. None of thegenes from the T6SS core cluster and the individual vgrGs were directly responsiblefor the cytoskeletal changes in infected cells. However, a mutant strain with all vgrGgenes deleted was unable to cause macrophage alterations. Despite not being able toidentify a specific effector protein responsible for the cytoskeletal defects inmacrophages, our strategy resulted in the identification of the critical core componentsand accessory proteins of the T6SS assembly machinery and provides a screeningmethod to detect T6SS effectors targeting the actin cytoskeleton in macrophages byrandom mutagenesis.

Beyond the Academy: Applying Anthropological Research, A Case Study of Demonstrating Impact in the U.K. 2014 REF

The 2014 Research Excellence Framework sought for the first time to assess the impact that research was having beyond the boundaries of the university and the wider academic sphere. While the REF continued the approach of previous research assessment exercises in attempting to measure the overall quality of research and teaching within the higher-education sector, it also expected institutions to evidence how some of their research had had ‘an effect on, change or benefit to the economy, society, culture, public policy or services, health, the environment or quality of life, beyond academia’ (REF 2012: 48). This article provides a case study in how researchers in one U.K. anthropology department were able to demonstrate the impact of their work in the public sphere successfully as part of this major audit exercise.

A Burkholderia Type VI Effector Deamidates Rho GTPases to Activate the Pyrin Inflammasome

Burkholderia cenocepacia is an opportunistic pathogen of the cystic fibrosis lung that elicits a strong inflammatory response. B. cenocepacia employs a type VI secretion system (T6SS) to survive in macrophages by disarming Rho-type GTPases, causing actin cytoskeletal defects. Here, we identified TecA, a non-VgrG T6SS effector responsible for actin disruption. TecA and other bacterial homologs bear a cysteine protease-like catalytic triad, which inactivates Rho GTPases by deamidating a conserved asparagine in the GTPase switch-I region. RhoA deamidation induces caspase-1 inflammasome activation, which is mediated by the familial Mediterranean fever disease protein Pyrin. In mouse infection, the deamidase activity of TecA is necessary and sufficient for B. cenocepacia-triggered lung inflammation and also protects mice from lethal B. cenocepacia infection. Therefore, Burkholderia TecA is a T6SS effector that modifies a eukaryotic target through an asparagine deamidase activity, which in turn elicits host cell death and inflammation through activation of the Pyrin inflammasome.

A comparison of theoretical Mg VI emission line strengths with active-region observations from SERTS

R-matrix calculations of electron impact excitation rates in N-like Mg VI are used to derive theoretical electron-density-sensitive emission line ratios involving 2s²2p³ - 2s2p⁴ transitions in the 269-403 Å wavelength range. A comparison of these with observations of a solar active region, obtained during the 1989 flight of the Solar EUV Rocket Telescope and Spectrograph (SERTS), reveals good agreement between theory and observation for the 2s²2p^{3 4}S - 2s2p ^{4 4}p transitions at 399.28, 400.67, and 403.30 Å, and the 2s²2p^{3 2}p - 2s2p^{4 2}D lines at 387.77 and 387.97 Å. However, intensities for the other lines attributed to Mg VI in this spectrum by various authors do not match the present theoretical predictions. We argue that these discrepancies are not due to errors in the adopted atomic data, as previously suggested, but rather to observational uncertainties or mis-identifications. Some of the features previously identified as Mg VI lines in the SERTS spectrum, such as 291.36 and 293.15 Å, are judged to be noise, while others (including 349.16 Å) appear to be blended.

Diseño de resortes helicoidales circulares a compresión aplicado a una matriz de corte existente en la escuela de Ingeniería Mecánica de la U.P.S.

El presente trabajo consiste en el estudio sobre el diseño de resortes helicoidales circulares a presión. El capítulo I contiene la Hipótesis, Objetivos (generales y específicos), cuestionamientos y alcances del tema de la presente tesis. El capítulo II presenta una información acerca de lsos istemas con miembros elásticos y la variación de la energía potencial elástica. El siguiente capítulo da a conocer las clases de resortes, su representación y acotación según las normas de dibujo técnico. El último capítulo trata sobre el desarrollo de la parte experimental de la tesis con el cálculo de un resorte helicoidal circular aplicado a una matriz de corte; procedimiento para el cálculo de estos elementos; y , el análisis de los valores obtenidos teóricamente con los reales.

Genotoxicity and cytotoxicity of Cr(VI) and Pb²+ in Pisum sativum

A toxicidade dos metais é uma problemática que envolve a saúde humana e o ambiente, sendo necessária uma vigilância constante e uma avaliação dos danos precisa e robusta. As plantas, como principal fonte alimentar e de produtos, são de vital importância à sociedade humana. Devido a serem seres sesseis, este grupo é um dos mais afectados por poluentes, tornandoos objectos de estudo extremamente interessantes. O objectivo desta tese foi avaliar os efeitos genotóxicos e citotóxicos do Cr(VI) e Pb2+ na espécie modelo Pisum sativum L. No capitulo I é introduzida a problemática da toxicidade de ambos os metais, com especial relevo nas plantas, bem como as abordagens mais actuais no estudo da geno e citotoxicidade. No capitulo II são apresentados os resultados dos estudos da genotoxicidade do Pb2+ (II-1) e Cr(VI) (II-2 e II-3), tendo sido realizados analises de dano ao DNA a vários níveis e alterações do ciclo celular (II-1 e II-2), bem como a detecção de instabilidade de microssatelites (II-1 e II-3), que é um indicador do estado funcional do mecanismo de reparação do DNA. O capítulo III aborda o efeito de stresses abióticos na capacidade fotossintética da espécie modelo. No capítulo III-1, realizou-se um estudo pioneiro de avaliação da aplicabilidade da citometria de fluxo no estudo da fotossíntese, mais concretamente no estado funcional e estrutural dos cloroplastos, quando expostos a um inibidor da fotossíntese (Paraquat). Os dados obtidos neste estudo encorajaram a aplicação da técnica nos capítulos III-2 e III-3, nos quais se analisaram os efeitos dos metais Pb2+ (III- 2) e Cr(VI) (III-3) na capacidade fotossintética de plantas expostas a este metal; em estudos que envolveram vários marcadores clássicos, para alem dos da citometria de fluxo. Finalmente, no capítulo IV são apresentadas as conclusões finais do trabalho, uma comparativa entre os efeitos e níveis de toxicidade dos dois metais em estudo e são apontadas algumas perspectivas para futuros estudos, levantadas pelos dados obtidos.