Synoptic versus orographic control on stationary convective banding

Quasi-stationary convective bands can cause large localised rainfall accumulations and are often anchored by topographic features. Here, the predictability of and mechanisms causing one such band are determined using ensembles of the Met Office Unified Model at convection-permitting resolution (1.5 km grid length). The band was stationary over the UK for 3 h and produced rainfall accumulations of up to 34 mm. The amount and location of the predicted rainfall was highly variable despite only small differences between the large-scale conditions of the ensemble members. Only three of 21 members of the control ensemble produced a stationary rain band; these three had the weakest upstream winds and hence lowest Froude number. Band formation was due to the superposition of two processes: lee-side convergence resulting from flow around an upstream obstacle and thermally forced convergence resulting from elevated heating over the upstream terrain. Both mechanisms were enhanced when the Froude number was lower. By increasing the terrain height (thus reducing the Froude number), the band became more predictable. An ensemble approach is required to successfully predict the possible occurrence of such quasi-stationary convective events because the rainfall variability is largely modulated by small variations of the large-scale flow. However, high-resolution models are required to accurately resolve the small-scale interactions of the flow with the topography upon which the band formation depends. Thus, although topography provides some predictability, the quasi-stationary convective bands anchored by it are likely to remain a forecasting challenge for many years to come.

Calibration of structure in a distributed forecasting model for a semiarid flash flood: dynamic surface storage and channel roughness

Flash floods pose a significant danger for life and property. Unfortunately, in arid and semiarid environment the runoff generation shows a complex non-linear behavior with a strong spatial and temporal non-uniformity. As a result, the predictions made by physically-based simulations in semiarid areas are subject to great uncertainty, and a failure in the predictive behavior of existing models is common. Thus better descriptions of physical processes at the watershed scale need to be incorporated into the hydrological model structures. For example, terrain relief has been systematically considered static in flood modelling at the watershed scale. Here, we show that the integrated effect of small distributed relief variations originated through concurrent hydrological processes within a storm event was significant on the watershed scale hydrograph. We model these observations by introducing dynamic formulations of two relief-related parameters at diverse scales: maximum depression storage, and roughness coefficient in channels. In the final (a posteriori) model structure these parameters are allowed to be both time-constant or time-varying. The case under study is a convective storm in a semiarid Mediterranean watershed with ephemeral channels and high agricultural pressures (the Rambla del Albujón watershed; 556 km 2 ), which showed a complex multi-peak response. First, to obtain quasi-sensible simulations in the (a priori) model with time-constant relief-related parameters, a spatially distributed parameterization was strictly required. Second, a generalized likelihood uncertainty estimation (GLUE) inference applied to the improved model structure, and conditioned to observed nested hydrographs, showed that accounting for dynamic relief-related parameters led to improved simulations. The discussion is finally broadened by considering the use of the calibrated model both to analyze the sensitivity of the watershed to storm motion and to attempt the flood forecasting of a stratiform event with highly different behavior.

A DFT study of the structures, stabilities and redox behaviour of the major surfaces of magnetite Fe3O4

The renewed interest in magnetite (Fe3O4) as a major phase in different types of catalysts has led us to study the oxidation–reduction behaviour of its most prominent surfaces. We have employed computer modelling techniques based on the density functional theory to calculate the geometries and surface free energies of a number of surfaces at different compositions, including the stoichiometric plane, and those with a deficiency or excess of oxygen atoms. The most stable surfaces are the (001) and (111), leading to a cubic Fe3O4 crystal morphology with truncated corners under equilibrium conditions. The scanning tunnelling microscopy images of the different terminations of the (001) and (111) stoichiometric surfaces were calculated and compared with previous reports. Under reducing conditions, the creation of oxygen vacancies in the surface leads to the formation of reduced Fe species in the surface in the vicinity of the vacant oxygen. The (001) surface is slightly more prone to reduction than the (111), due to the higher stabilisation upon relaxation of the atoms around the oxygen vacancy, but molecular oxygen adsorbs preferentially at the (111) surface. In both oxidized surfaces, the oxygen atoms are located on bridge positions between two surface iron atoms, from which they attract electron density. The oxidised state is thermodynamically favourable with respect to the stoichiometric surfaces under ambient conditions, although not under the conditions when bulk Fe3O4 is thermodynamically stable with respect to Fe2O3. This finding is important in the interpretation of the catalytic properties of Fe3O4 due to the presence of oxidised species under experimental conditions.

Are we there yet? Exploring empowerment at the microscale in the South African wine industry

Empowerment is a standard but ambiguous element of development rhetoric and so, through the socially complex and contested terrain of South Africa, this paper explores its potential to contribute to inclusive development. Investigating micro-level engagements with the national strategy of Broad-Based Black Economic Empowerment (B-BBEE) in the South African wine industry highlights the limitations, but also potential, of this single domain approach. However, latent paternalism, entrenched interests and a ‘dislocated blackness’ maintain a complex racial politics that shapes both power relations and the opportunities for transformation within the industry. Nonetheless, while B-BBEE may not, in reality, be broad-based its manifestations are contributing to challenging racist structures and normalising changing attitudes. This paper concludes that, to be transformative, empowerment needs to be re-embedded within South Africa as a multi-scalar, multi-dimensional dialogue and, despite the continuation of structural constraints, positions the local as a critical scale at which to initiate broader social change.

L’éternel retour du "travail des enfants" dans les politiques publiques au Burkina Faso : perspective historique

Dans une perspective historique, ce chapitre cherche à comprendre comment le travail des enfants a été construit comme « problème » dans les politiques publiques au Burkina Faso. En remontant aux politiques coloniales françaises dans le pays, il se propose de répondre à la question suivante : face à l’émergence et au renforcement des politiques publiques de lutte contre le travail des enfants, assiste-t-on à une disparition du modèle de l’enfant du lignage qui percevait l’enfant comme une « richesse » et une force de travail complémentaire? Le chapitre présente d’abord la construction progressive du travail des enfants en « problème » de politiques publiques pendant la colonisation. Il analyse ensuite l’évolution et la portée de l’intervention des gouvernements successifs après l’indépendance pour imposer une nouvelle vision de l’enfant (l’enfant de la Nation). Enfin, il révèle que malgré l’engouement récent pour la prise en compte du point de vue l’enfant, le statut de l’enfant travailleur comme sujet peine à être reconnu. L’analyse globale montre une tension permanente, à des degrés différents, entre les modèles de l’enfant de la nation, de l’enfant du lignage et de l’enfant sujet : ce qui traduit aussi la complexité du travail des enfants et de sa lutte au Burkina Faso contemporain. Le texte est issu d’un travail de terrain mené au Burkina Faso en 2008 et 2009 dans le cadre de notre thèse.

Mobilisations contre le travail des enfants au Burkina Faso : quelquees considérations de la dimension genre

La lutte contre le travail des enfants au Burkina Faso a resurgi dans la scène publique ces dix dernières années avec un engouement sans précédent aussi bien de la part des acteurs étatiques, des ONG que des organismes onusiens. Ce chapitre traite, dans une double perspective sociologique et anthropologique, de la dimension « genre » de cette lutte et cherche à voir dans quelle mesure celle-ci est prise en compte (ou non) dans les pratiques concrètes de retrait d’enfants des travaux considérés comme dangereux. Peut-on parler de politiques et de programmes « genrés » dans le champ de la lutte contre le travail des enfants au Burkina Faso ? Le chapitre est structuré en trois parties. Il présente d’abord les éléments caractéristiques de l’approche genre dans la lutte contre le travail des enfants. Ensuite, il aborde les politiques et les acteurs de cette lutte au Burkina Faso, en décrivant les processus de problématisation et publicisation de la question. Enfin, il traite du cas spécifique d’un projet triennal de retrait d’enfants des mines artisanales des régions du Nord et du Sahel burkinabè pour questionner la prise en compte du genre, des obstacles sociaux, culturels et d’autres contraintes possibles à l’égalité fille-garçon dans cette intervention. Il questionne par ailleurs la part des acteurs de terrain dans la (re)production des normes et des rôles sexués. Les données sont issues de quatre années de recherche menée au Burkina Faso entre 2008 et 2011, auprès d’acteurs engagés dans la production des politiques de lutte et/ou engagés dans la lutte concrète, mais également avec des enfants, parents et employeurs.

Evidence of a topographic signal in surface soil moisture derived from ENVISAT ASAR wide swath data

The susceptibility of a catchment to flooding is affected by its soil moisture prior to an extreme rainfall event. While soil moisture is routinely observed by satellite instruments, results from previous work on the assimilation of remotely sensed soil moisture into hydrologic models have been mixed. This may have been due in part to the low spatial resolution of the observations used. In this study, the remote sensing aspects of a project attempting to improve flow predictions from a distributed hydrologic model by assimilating soil moisture measurements are described. Advanced Synthetic Aperture Radar (ASAR) Wide Swath data were used to measure soil moisture as, unlike low resolution microwave data, they have sufficient resolution to allow soil moisture variations due to local topography to be detected, which may help to take into account the spatial heterogeneity of hydrological processes. Surface soil moisture content (SSMC) was measured over the catchments of the Severn and Avon rivers in the South West UK. To reduce the influence of vegetation, measurements were made only over homogeneous pixels of improved grassland determined from a land cover map. Radar backscatter was corrected for terrain variations and normalized to a common incidence angle. SSMC was calculated using change detection. To search for evidence of a topographic signal, the mean SSMC from improved grassland pixels on low slopes near rivers was compared to that on higher slopes. When the mean SSMC on low slopes was 30–90%, the higher slopes were slightly drier than the low slopes. The effect was reversed for lower SSMC values. It was also more pronounced during a drying event. These findings contribute to the scant information in the literature on the use of high resolution SAR soil moisture measurement to improve hydrologic models.

Care in the community? Interpretations of a fractured goat bone from Neolithic Jarmo, Iraq

A case study of a goat metatarsal exhibiting a complex diaphyseal fracture from Pottery Neolithic Jarmo in the Central Zagros region of the eastern Fertile Crescent is here described and analysed. The Central Zagros is one of the areas with the earliest evidence for goat domestication. The significance of the pathology may be viewed within the context of domestic goat ecology in the landscape of Jarmo, potentially impacting browsing behaviour (goats raise themselves on their hind limbs to browse) and movement with the herd in the landscape (the terrain around Jarmo is very steep in places, which would be difficult for an animal to navigate on three legs). In the light of this, possible levels of care that the Neolithic human community may have afforded this animal are discussed – from a situation where therapeutic intervention may have occurred, to one of stall confinement of the animal to allow the pathology to heal, to a position of simple awareness of the condition – and how this impacts on our understanding of changes in attitudes towards animals through the process of domestication.

Advances in the stochastic modelling of satellite-derived rainfall estimates using a sparse calibration dataset

As satellite technology develops, satellite rainfall estimates are likely to become ever more important in the world of food security. It is therefore vital to be able to identify the uncertainty of such estimates and for end users to be able to use this information in a meaningful way. This paper presents new developments in the methodology of simulating satellite rainfall ensembles from thermal infrared satellite data. Although the basic sequential simulation methodology has been developed in previous studies, it was not suitable for use in regions with more complex terrain and limited calibration data. Developments in this work include the creation of a multithreshold, multizone calibration procedure, plus investigations into the causes of an overestimation of low rainfall amounts and the best way to take into account clustered calibration data. A case study of the Ethiopian highlands has been used as an illustration.

Why your customers’ social identities matter

The article looks at the role of consumers' social identities in their purchasing decisions, and hence in the creation of effective marketing strategies. It says that people generally belong to multiple social groups, any one of which may have the most salience for them in a given situation. It reports on social psychology research on how a person's connection with a particular social identity can be triggered and discusses the idea in the context of marketing products including the Toyota Prius hybrid-electric automobile, Nescafé instant coffee, and the Jeep all-terrain vehicle. INSET: Lessons of the Stanford Prison Experiment.

Quantifying particle size and turbulent scale dependence of dust uplift in the Sahara using aircraft measurements

The first size-resolved airborne measurements of dust fluxes and the first dust flux measurements from the central Sahara are presented and compared with a parameterization by Kok (2011a). High-frequency measurements of dust size distribution were obtained from 0.16 to 300 µm diameter, and eddy covariance fluxes were derived. This is more than an order of magnitude larger size range than previous flux estimates. Links to surface emission are provided by analysis of particle drift velocities. Number flux is described by a −2 power law between 1 and 144 µm diameter, significantly larger than the 12 µm upper limit suggested by Kok (2011a). For small particles, the deviation from a power law varies with terrain type and the large size cutoff is correlated with atmospheric vertical turbulent kinetic energy, suggesting control by vertical transport rather than emission processes. The measured mass flux mode is in the range 30–100 µm. The turbulent scales important for dust flux are from 0.1 km to 1–10 km. The upper scale increases during the morning as boundary layer depth and eddy size increase. All locations where large dust fluxes were measured had large topographical variations. These features are often linked with highly erodible surface features, such as wadis or dunes. We also hypothesize that upslope flow and flow separation over such features enhance the dust flux by transporting large particles out of the saltation layer. The tendency to locate surface flux measurements in open, flat terrain means these favored dust sources have been neglected in previous studies.

Evaluation of positioning error-induced pixel shifts on satellite linear push-broom imagery

Georeferencing is one of the major tasks of satellite-borne remote sensing. Compared to traditional indirect methods, direct georeferencing through a Global Positioning System/inertial navigation system requires fewer and simpler steps to obtain exterior orientation parameters of remotely sensed images. However, the pixel shift caused by geographic positioning error, which is generally derived from boresight angle as well as terrain topography variation, can have a great impact on the precision of georeferencing. The distribution of pixel shifts introduced by the positioning error on a satellite linear push-broom image is quantitatively analyzed. We use the variation of the object space coordinate to simulate different kinds of positioning errors and terrain topography. Then a total differential method was applied to establish a rigorous sensor model in order to mathematically obtain the relationship between pixel shift and positioning error. Finally, two simulation experiments are conducted using the imaging parameters of Chang’ E-1 satellite to evaluate two different kinds of positioning errors. The experimental results have shown that with the experimental parameters, the maximum pixel shift could reach 1.74 pixels. The proposed approach can be extended to a generic application for imaging error modeling in remote sensing with terrain variation.

Limitations to recording larger mammalian predators in savannah using camera traps and spoor

Traditionally, spoor (tracks, pug marks) have been used as a cost effective tool to assess the presence of larger mammals. Automated camera traps are now increasingly utilized to monitor wildlife, primarily as the cost has greatly declined and statistical approaches to data analysis have improved. While camera traps have become ubiquitous, we have little understanding of their effectiveness when compared to traditional approaches using spoor in the field. Here, we a) test the success of camera traps in recording a range of carnivore species against spoor; b) ask if simple measures of spoor size taken by amateur volunteers is likely to allow individual identification of leopards and c) for a trained tracker, ask if this approach may allow individual leopards to be followed with confidence in savannah habitat. We found that camera traps significantly under-recorded mammalian top and meso-carnivores, with camera traps more likely under-record the presence of smaller carnivores (civet 64%; genet 46%, Meller’s mongoose 45%) than larger (jackal sp. 30%, brown hyena 22%), while leopard was more likely to be recorded by camera trap (all recorded by camera trap only). We found that amateur trackers could be beneficial in regards to collecting presence data; however the large variance in measurements of spoor taken in the field by volunteers suggests that this approach is unlikely to add further data. Nevertheless, the use of simple spoor measurements in the field by a trained field researcher increases their ability to reliably follow a leopard trail in difficult terrain. This allows researchers to glean further data on leopard behaviour and habitat utilisation without the need for complex analysis.

The utility of convection-permitting ensembles for the prediction of stationary convective bands

This study examines convection-permitting numerical simulations of four cases of terrain-locked quasi-stationary convective bands over the UK. For each case, a 2.2-km grid-length 12-member ensemble and 1.5-km grid-length deterministic forecast are analyzed, each with two different initialization times. Object-based verification is applied to determine whether the simulations capture the structure, location, timing, intensity and duration of the observed precipitation. These verification diagnostics reveal that the forecast skill varies greatly between the four cases. Although the deterministic and ensemble simulations captured some aspects of the precipitation correctly in each case, they never simultaneously captured all of them satisfactorily. In general, the models predicted banded precipitation accumulations at approximately the correct time and location, but the precipitating structures were more cellular and less persistent than the coherent quasi-stationary bands that were observed. Ensemble simulations from the two different initialization times were not significantly different, which suggests a potential benefit of time-lagging subsequent ensembles to increase ensemble size. The predictive skill of the upstream larger-scale flow conditions and the simulated precipitation on the convection-permitting grids were strongly correlated, which suggests that more accurate forecasts from the parent ensemble should improve the performance of the convection-permitting ensemble nested within it.

Uncertainties in tidally adjusted estimates of sea level rise flooding (bathtub model) for the Greater London

Sea-level rise (SLR) from global warming may have severe consequences for coastal cities, particularly when combined with predicted increases in the strength of tidal surges. Predicting the regional impact of SLR flooding is strongly dependent on the modelling approach and accuracy of topographic data. Here, the areas under risk of sea water flooding for London boroughs were quantified based on the projected SLR scenarios reported in Intergovernmental Panel on Climate Change (IPCC) fifth assessment report (AR5) and UK climatic projections 2009 (UKCP09) using a tidally-adjusted bathtub modelling approach. Medium- to very high-resolution digital elevation models (DEMs) are used to evaluate inundation extents as well as uncertainties. Depending on the SLR scenario and DEMs used, it is estimated that 3%–8% of the area of Greater London could be inundated by 2100. The boroughs with the largest areas at risk of flooding are Newham, Southwark, and Greenwich. The differences in inundation areas estimated from a digital terrain model and a digital surface model are much greater than the root mean square error differences observed between the two data types, which may be attributed to processing levels. Flood models from SRTM data underestimate the inundation extent, so their results may not be reliable for constructing flood risk maps. This analysis provides a broad-scale estimate of the potential consequences of SLR and uncertainties in the DEM-based bathtub type flood inundation modelling for London boroughs.