Avaliação de um sistema descentralizado de tratamento de esgotos domésticos em escala real composto por tanque séptico e wetland construída híbrida

A concentração demográfica e de sistemas coletivos de esgotamento sanitário dentro do perímetro urbano da maioria dos municípios brasileiros, dificulta a viabilização do fornecimento de serviços de tratamento de esgotos domésticos à habitações e núcleos habitacionais isolados situados em áreas periurbanas e rurais, intensificando os danos provocados pela poluição de origem antrópica ao meio ambiente e à preservação da saúde pública. Para contribuir no equacionamento deste problema, o presente estudo teve por finalidade avaliar uma wetland construída híbrida em escala real, composta por uma unidade com fluxo contínuo subsuperficial vertical seguida por uma unidade de fluxo contínuo subsuperficial horizontal, cultivadas com capim Vetiver, para o tratamento de efluente proveniente de tanque séptico. A presente configuração experimental busca uma solução de baixo custo e simplificada para o tratamento descentralizado de esgotos domésticos. A estação experimental de tratamento de esgotos, parte integrante e um dos produtos da Rede Nacional de Tratamento de Esgotos Descentralizados RENTED, foi construída no Centro Tecnológico de Hidráulica CTH / Escola Politécnica EPUSP, campus Butantã da USP, em São Paulo. O esgoto bruto foi proveniente do Conjunto Residencial da USP e do restaurante central da Cidade Universitária. As vazões média e máxima de esgoto bruto, respectivamente, de 640L.d-1 e 1600L.d-1, foram aplicadas à entrada do TS de 5.000L e deste escoaram por gravidade à entrada da wetland construída híbrida, com TDH total de 2,8d e 1,1d, respectivamente, sob aplicação das vazões média e máxima de projeto. O monitoramento do experimento em campo, incluindo o período inicial de partida, durou 6 meses consecutivos. Foram avaliados os parâmetros físico-químicos e microbiológicos do esgoto bruto e do efluente do tanque séptico e das câmaras da wetland construída híbrida durante 97 dias consecutivos. Os resultados indicaram que tanto as mudas jovens quanto as adultas de capim Vetiver adaptaram-se bem às condições ambientais. As eficiências médias de remoção no efluente tratado final quanto à matéria orgânica carbonácea foram de 96 por cento para DBO5,20 e 90 por cento para DQO, 40 por cento para N-total, 23 por cento para N-amoniacal total, 60 por cento para P-total, 52 por cento para P-PO4, 74 por cento para SST, 96 por cento para SSV, 75 por cento para sólidos sedimentáveis, 44 por cento para SDV, 88 por cento para sulfeto total, e 97 por cento para óleos e graxas totais, variando entre 73 por cento a 100 por cento . Cerca de 80 por cento da fração orgânica da matéria nitrogenada presente no esgoto bruto foi removida. A remoção de coliformes termotolerantes foi, em média, de 2 e 3 unidades log, e de Escherichia Coli, média de 1 e 3 unidades log, respectivamente, sob aplicação das vazões máxima e média, Giardia sp, média de 99,995 por cento , Cryptosporidium sp, média de 98,7 por cento , Enterovírus, média de 99,6 por cento , e Ascaris sp, média de 0,10 ovo/L. A remoção de sulfetos propiciou a geração de efluente tratado sem odores desagradáveis. A diminuição da vazão aplicada e a elevação do TDH influenciaram positivamente no desempenho do sistema com relação às remoções dos parâmetros físico-químicos e microbiológicos. Com base no presente estudo, ficou evidente o benefício da associação de wetlands construídas com fluxo vertical e horizontal no tratamento de efluente de tanque séptico. O capim Vetiver apresentou bom potencial de utilização em wetlands 8 construídas para tratamento de esgotos domésticos. O sistema experimental de tratamento apresentou flexibilidade operacional, mantendo bom desempenho inclusive nos períodos de sobrecarga. A qualidade do efluente tratado final obtido no presente estudo atende às exigências de lançamento e aos padrões de emissão de efluentes líquidos em corpos dágua e em sistemas públicos de esgotamento sanitário definidos na legislação ambiental federal e do Estado de São Paulo. A tecnologia de wetlands construídas híbridas associada ao tratamento de efluentes de tanque séptico apresentou bom potencial para o tratamento descentralizado de esgotos domésticos, inclusive em regiões com pouca disponibilidade de área livre.

Chinese Intellectuals and China`s Policy toward Japan

This dissertation aims at integrating two scholarships: state-society relation studies and Chinese foreign policy analysis. I created Two-level Perception Gap Model to analyze different intellectual groups' relations with party-state by confirming Chinese intellectuals play a role in CFP making in general, China's Japan policy in particular. This model is an alternative approach, instead of conventional wisdom patron-client approach, to explain and analyze the pluralized intellectual-state relations in China. This model first analyzed the role of two intellectual groups, namely think tank scholars and popular nationalist, in China's Japan policy making, and then based on these analyses it explains the interactional patterns between these two intellectual groups and party-state. I used three case studies, which represented different types of issue, Chinese attitude toward the U.S.-Japan alliance and the Japanese defense policy, the controversy over the Yasukuni Shrine Visit, and the territorial dispute over the Diaoyu/Senkaku Islands, to examine this model. First, I examined think tank scholar groups and the extent they influenced "core interest issue and sensitive issue (Issue 1)," Chinese attitude toward the U.S.-Japan alliance and the Japanese defense policy, and their international patterns with party-state. Chapter 3 compares the responses of Chinese officials to the changes in the defense policy of Japan to the analyses from the think tank scholars. As the model assumes, results show that think tank scholars' analyses are consistent with China's policy position; nevertheless, it is difficult to confirm their analyses have influence on Chinese attitude toward the U.S.-Japan alliance and the Japanese defense policy. Based on the analysis of journal articles, most articles do not provide policy suggestions or simply provide suggestions that do not deviate from the policy. As Gu's theory of pluralist institutionalism and my hypothesis points out, most think tank scholars are establishment intellectuals so they tend to be self-disciplined. Second, this model provide a new concept "patriotic dilemma" for analyzing the challenge and constraints brought by popular nationalist discourses and public mobilization to Chinese foreign policy decision makers. Chapter 4 investigated the cases study of the controversy over the Yasukuni Shrine Visit, defined as "major/minor interest issue/ sensitive issue (Issue 3)," and the discourses from the popular nationalist, mainly focusing on anti-Japanese activists. The chapter also observes their influence on nationalist public opinions and analyzes how the nationalist public opinions constrain the policy choices among decision makers. Results strongly supported the hypothesis of patriotic dilemma that, although the popular nationalist group and public opinions constrained the policy choices of Chinese decision makers in the short term, they were unable to change the fundamental policy direction. Third, chapter 5 also focuses on anti-Japanese activists and examines the model with the case of the territorial dispute over the Diaoyu/Senkaku Islands. The result supported that hypothesis that China's policy change was not because of the influence from popular nationalist's discourses or public opinions but because of the change of priority of this issue, from major/minor interest issue to core interest issue. These two chapters also indicate that the patron-client model is unable to describe the popular nationalist. An alternative approach, such as the concept "patriotic dilemma" is needed to describe the relations between the popular nationalist and the government.

Reaproveitamento de lamas residuais do processo de fabricação do concreto.

Nos dias atuais, um dos maiores problemas de uma central dosadora de concreto são as sobras de resíduos de concretos que retornam nos caminhões, das obras gerando lamas decantadas com pH elevado caracterizando-a como resíduo perigoso e representando gastos elevados com destinação. O objetivo do presente trabalho visa estudar em detalhes a composição da lama residual do processo de fabricação do concreto excluindo o agregado graúdo, verificando qual é a influência de sua adição no concreto. Com isso, pretende-se estudar algumas formas de tratamento e viabilizar economicamente o seu reaproveitamento em substituição ao agregado miúdo. Para esse estudo foram coletadas duas amostras desse material cimentício, sendo uma coletada diretamente do tanque de decantação e a segunda coletada da própria lavagem dos caminhões betoneiras. Elas foram submetidas a ensaios de caracterização como: análise termogravimétrica (TG), granulometria a laser e calorimetria e ensaios de concreto fresco (reologia e abatimento) e concreto endurecido. Para a viabilização econômica foi realizado um estudo de caso em três centrais dosadoras de concreto, afim de identificar perdas de materiais, custos de destinação e custo variável na fabricação de concreto. Os resultados mostraram que a forma de coleta do material cimentício influencia na finura do material conforme ensaio de granulometria e densidade aparente, mas não foi possível obter cimento anidro. A possibilidade de utilização da lama em concretos foi possível com ajuda de aditivos superplastificantes, mas para a viabilização economicamente viável a cadeia produtiva do concreto estudou-se um teor ótimo de substituição da lama pelo agregado miúdo.

Controle cooperativo aplicado a sistemas de posicionamento dinâmico.

Hoje em dia com o crescente aumento da exploração de petróleo e gás em águas profundas, há um aumento na demanda por operações offshore envolvendo a cooperação entre unidades flutuantes. Tais operações requerem um alto nível de planejamento e coordenação, o que na maioria dos casos é feito com a troca de informação no nível de operação, com cada unidade flutuante comandada independentemente. Exemplos de operações deste tipo vão desde operações de alívio passando por operações de instalação de equipamento submarino, até operações de pesquisa envolvendo múltiplas unidades flutuantes dotadas de sistema de posicionamento dinâmico (DP). As vantagens do controle cooperativo surgem com a redução do erro da distância relativa durante a manutenção do posicionamento ou durante a execução de manobras de posicionamento conjuntas. No presente trabalho, os conceitos de controle de consenso são aplicados de forma combinada com o sistema DP de cada navio. A influência dos ganhos do controlador cooperativo no sistema como um todo será discutida, utilizando-se técnicas de análise da resposta em frequência. Simulações completas no domínio do tempo e experimentos usando modelos em escala serão utilizados para se demonstrar o funcionamento do controle cooperativo. Todas as simulações serão conduzidas no simulador Dynasim e os ensaios experimentais no tanque de provas da Engenharia Naval da Escola Politécnica da Universidade de São Paulo. Além disso, serão feitas comparações entre os experimentos em tanque de provas e simulações numéricas equivalentes, demonstrando-se a validade dos ensaios numéricos. Será também demonstrado que os requisitos de projetos adotados são atendidos pelos ensaios em tanque de provas. .

Gas Storage Scale-up at Room Temperature on High Density Carbon Materials

In relation to the current interest on gas storage demand for environmental applications (e.g., gas transportation, and carbon dioxide capture) and for energy purposes (e.g., methane and hydrogen), high pressure adsorption (physisorption) on highly porous sorbents has become an attractive option. Considering that for high pressure adsorption, the sorbent requires both, high porosity and high density, the present paper investigates gas storage enhancement on selected carbon adsorbents, both on a gravimetric and on a volumetric basis. Results on carbon dioxide, methane, and hydrogen adsorption at room temperature (i.e., supercritical and subcritical gases) are reported. From the obtained results, the importance of both parameters (porosity and density) of the adsorbents is confirmed. Hence, the densest of the different carbon materials used is selected to study a scale-up gas storage system, with a 2.5 l cylinder tank containing 2.64 kg of adsorbent. The scale-up results are in agreement with the laboratory scale ones and highlight the importance of the adsorbent density for volumetric storage performances, reaching, at 20 bar and at RT, 376 g l-1, 104 g l-1, and 2.4 g l-1 for CO2, CH4,and H2, respectively.

Activated Carbon Fibre Monoliths for Hydrogen Storage

Porous adsorbents are currently investigated for hydrogen storage application. From a practical point of view, in addition to high porosity developments, high material densities are required, in order to confine as much material as possible in a tank device. In this study, we use different measured sample densities (tap, packing, compacted and monolith) for analyzing the hydrogen adsorption behavior of activated carbon fibres (ACFs) and activated carbon nanofibres (ACNFs) which were prepared by KOH and CO2 activations, respectively. Hydrogen adsorption isotherms are measured for all of the adsorbents at room temperature and under high pressures (up to 20 MPa). The obtained results confirm that (i) gravimetric H2 adsorption is directly related to the porosity of the adsorbent, (ii) volumetric H2 adsorption depends on the adsorbent porosity and importantly also on the material density, (iii) the density of the adsorbent can be improved by packing the original adsorbents under mechanical pressure or synthesizing monoliths from them, (iv) both ways (packing under pressure or preparing monoliths) considerably improve the storage capacity of the starting adsorbents, and (v) the preparation of monoliths, in addition to avoid engineering constrains of packing under mechanical pressure, has the advantage of providing high mechanical resistance and easy handling of the adsorbent.

Evaluating Spirulina as a protein source in Nile Tilapia (Oreochromis niloticus) grow-out diets

Aquaculture growth has intensified the need for a diversification of nutritionally appropriate aquafeed ingredients. The purpose of this study was to evaluate Spirulina, a blue-green microalgae, and soybean meal as the sole protein sources in grow-out Tilapia diets. We constructed 3 experimental diets with soybean meal and 0,15, 30, and 45% Spirulina (SBM, SP15, SP30, and SP45 respectively) as their main protein sources. We compared these diets to a commercial Tilapia diet (CC). Additionally, to evaluate the benefit of fishmeal inclusion, fishmeal was added (2 and 10%) to the most successful Spirulina containing diet (FM2, FM10). We evaluated these experimental diets based on their physical properties, palatability, growth potential, waste production, and overall cost. No significant differences in growth performance were found between any of the diets. Total ammonia nitrogen (TAN) and total phosphorus (TP) levels in each tank were significantly affected by diet (p<0.05). CC had significantly higher TP than the experimental diets and SP15 had significantly higher TAN than the other diets. Only CC was found to be significantly more palatable than the experimental diets, and Spirulina inclusion was inversely correlated to pellet stability. Lastly, SP15 was the most profitable experimental diet. We recommend eliminating fishmeal from grow-out Tilapia diets in favour of soybean meal and Spirulina. Spirulina should, however, be limited to 15% to avoid the negative effects it has on stability and profitability, and its possible effect on feed intake.

Investigation of Performance Enhancements for a Liquid-Desiccant Solar Air-Conditioner

Thermally driven liquid-desiccant air-conditioners (LDAC) are a proven but still developing technology. LDACs can use a solar thermal system to reduce the operational cost and environmental impact of the system by reducing the amount of fuel (e.g. natural gas, propane, etc.) used to drive the system. LDACs also have a key benefit of being able to store energy in the form of concentrated desiccant storage. TRNSYS simulations were used to evaluate several different methods of improving the thermal and electrical coefficients of performance (COPt and COPe) and the solar fraction (SF) of a LDAC. The study analyzed a typical June to August cooling season in Toronto, Ontario. Utilizing properly sized, high-efficiency pumps increased the COPe to 3.67, an improvement of 55%. A new design, featuring a heat recovery ventilator on the scavenging-airstream and an energy recovery ventilator on the process-airstream, increased the COPt to 0.58, an improvement of 32%. This also improved the SF slightly to 54%, an increase of 8%. A new TRNSYS TYPE was created to model a stratified desiccant storage tank. Different volumes of desiccant were tested with a range of solar array system sizes. The largest storage tank coupled with the largest solar thermal array showed improvements of 64% in SF, increasing the value to 82%. The COPe was also improved by 17% and the COPt by 9%. When combining the heat recovery systems and the desiccant storage systems, the simulation results showed a 78% increase in COPe and 30% increase in COPt. A 77% improvement in SF and a 17% increase in total cooling rate were also predicted by the simulation. The total thermal energy consumed was 10% lower and the electrical consumption was 34% lower. The amount of non-renewable energy needed from the natural gas boiler was 77% lower. Comparisons were also made between LDACs and vapour-compression (VC) systems. Dependent on set-up, LDACs provided higher latent cooling rates and reduced electrical power consumption. Negatively, a thermal input was required for the LDAC systems but not for the VC systems.

BIDIRECTIONAL AC-DC CONVERTERS USING ONE CYCLE CONTROL (OCC) FOR ELECTRIC VEHICLES

The electric vehicle (EV) market has seen a rapid growth in the recent past. With an increase in the number of electric vehicles on road, there is an increase in the number of high capacity battery banks interfacing the grid. The battery bank of an EV, besides being the fuel tank, is also a huge energy storage unit. Presently, it is used only when the vehicle is being driven and remains idle for rest of the time, rendering it underutilized. Whereas on the other hand, there is a need of large energy storage units in the grid to filter out the fluctuations of supply and demand during a day. EVs can help bridge this gap. The EV battery bank can be used to store the excess energy from the grid to vehicle (G2V) or supply stored energy from the vehicle to grid (V2G ), when required. To let power flow happen, in both directions, a bidirectional AC-DC converter is required. This thesis concentrates on the bidirectional AC-DC converters which have a control on power flow in all four quadrants for the application of EV battery interfacing with the grid. This thesis presents a bidirectional interleaved full bridge converter topology. This helps in increasing the power processing and current handling capability of the converter which makes it suitable for the purpose of EVs. Further, the benefit of using the interleaved topology is that it increases the power density of the converter. This ensures optimization of space usage with the same power handling capacity. The proposed interleaved converter consists of two full bridges. The corresponding gate pulses of each switch, in one cell, are phase shifted by 180 degrees from those of the other cell. The proposed converter control is based on the one-cycle controller. To meet the challenge of new requirements of reactive power handling capabilities for grid connected converters, posed by the utilities, the controller is modified to make it suitable to process the reactive power. A fictitious current derived from the grid voltage is introduced in the controller, which controls the converter performance. The current references are generated using the second order generalized integrators (SOGI) and phase locked loop (PLL). A digital implementation of the proposed control ii scheme is developed and implemented using DSP hardware. The simulated and experimental results, based on the converter topology and control technique discussed here, are presented to show the performance of the proposed theory.

A Strong Europe in a Globalized World: From the Hungarian to the Polish presidency of the Council of the European Union. ACES Working Papers, 2011

On June 17, 2011, the Center for Transatlantic Relations – together with the Center for European Policy Analysis, the Polish Institute of International Affairs in Warsaw, and the Embassies of Hungary and Poland – hosted authors writing on the theme “A Strong Europe in a Globalized World,” and who offered in-depth, substantive reflections about how the United States and Europe can work together more closely in meeting global challenges. Drawing on the agendas of the outgoing and incoming EU Presidencies of the Council of the European Union – Hungary and Poland respectively – authors focused on the importance of a strong US-EU partnership in the face of mounting global challenges, from the current financial and economic crisis through the insecurities of energy markets and the promise of the Arab Spring. Authors explored in depth four key areas of shared interests: A Global Perspective (Transatlantic Partnership in a Globalized World); Achievements and Deliverables of Eastern Partnership; Euro-Atlantic Perspectives for the Balkans; and Common Challenges of Energy Security. Senior Hungarian and Polish government officials, subject matter experts, private sector actors, and think tank scholars participated.

Growth, survival, gene expression, microbiota and tryptic activity during feeding of Scophthalmus maximus first feeding larvae with beta-glucan (MacroGard)

Reflecting the natural biology of mass spawning fish aquaculture production of fish larvae is often hampered by high and unpredictable mortality rates. The present study aimed to enhance larval performance and immunity via the oral administration of an immunomodulator, beta-glucan (MacroGard®) in turbot (Scophthalmus maximus). Rotifers (Brachionus plicatilis) were incubated with or without yeast beta-1,3/1,6-glucan in form of MacroGard® at a concentration of 0.5 g/L. Rotifers were fed to first feeding turbot larvae once a day. From day 13 dph onwards all tanks were additionally fed untreated Artemia sp. nauplii (1 nauplius ml/L). Daily mortality was monitored and larvae were sampled at 11 and 24 dph for expression of 30 genes, trypsin activity and size measurements. Along with the feeding of beta-glucan daily mortality was significantly reduced by ca. 15% and an alteration of the larval microbiota was observed. At 11 dph gene expression of trypsin and chymotrypsin was elevated in the MacroGard® fed fish, which resulted in heightened tryptic enzyme activity. No effect on genes encoding antioxidative proteins was observed, whilst the immune response was clearly modulated by beta-glucan. At 11 dph complement component c3 was elevated whilst cytokines, antimicrobial peptides, toll like receptor 3 and heat shock protein 70 were not affected. At the later time point (24 dph) an anti-inflammatory effect in form of a down-regulation of hsp 70, tnf-alpha and il-1beta was observed. We conclude that the administration of beta-glucan induced an immunomodulatory response and could be used as an effective measure to increase survival in rearing of turbot.