RADIAÇÃO SOLAR TOTAL DENTRO E FORA DE FLORESTA TROPICAL ÚMIDA DE TERRA FIRME (TUCURUÍ, PARÁ)

Medidas de radiação solar global foram executadas dentro e fora de mata tropical úmida de terra firme durante o dia 07 de novembro de 1986, em Tucuruí, Pará. As intensidades de radiação solar incidentes em 3 sensores instalados aleatoriamente no chão da floresta e um sensor localizado em área aberta (sensor padrão) são avaliadas e intercomparadas. A radiação média que atinge o chão da floreeta foi 4.7% da radiação incidente em área aberta adjacente à floresta. As diferenças entre as medidas dos sensores da mata e o padrão pode ser atribuída à distribuição espacial heterogênea da radiação solar que alcança o chão da floresta.

VARIAÇÃO SAZONAL DE SULFATO, ENXOFRE TOTAL E MATÉRIA ORGÂNICA NO GÊNERO HUMIRIANTHERA,EM FUNÇÃO DA IDADE

No período de janeiro a dezembro de 1986 foram coletados 28 (vìnte e oito) espécimens de H. ampla e 09 (nove) de H. rupestris, nas idades adulta e jovem, para determinação dos teores de S04~ e S-total em folha, caule, tubércolo e no solo onde as mesmas se desenvolveram. Em H. ampla o teor de 504~ variou de 0,22-0,78% e em H. rupestris de 0,22-1,30%. O teor de 5 em H. ampla variou de 0,74-0,96% e em H. rupestris de 0,75-1,02%. O teor de S04~em H. ampla obedece a relação folha>tubérculo>caule independente da época e idade fisiológica, enquanto em H. rupestris a relação é tubérculo>folha>caule. 0 S apresenta um comportamento diferente, mantendo a relação tubérculo>caule>folha para H. ampla e tubérculo>folha>caule para H. rupestris. No solo onde H. ampla se desenvolveu não se observou variação do teor de S04~(0,52%) enquanto para H. rupestris a variação foi de 0,27-0,63% sendo maiores na época chuvosa. Devido a interrelação vegetação-solo analisou-se os teores de C-orgânico no material vegetal e no solo.

THE VEGETATION OF A SEASONAL VÁRZEA FOREST IN THE LOWER SOLIMÕES RIVER, BRAZILIAN AMAZONIA

The species composition of the seasonal várzea forest growing on a bank of the Ilha de Marchantaria / lower Solimões-Amazonas River, Brazil was studied in an area of slightly less than one hectare. Two biomass plots were harvested. Forty-seven arboreal species representing 46 genera in 25 families were recorded. Tree density was 1086 per hectare. Total basal area was 45 m2 ha1. Mean species density was 6.5 ± 1.98 per 100 m2. The most abundant species were Crataeva benthamii(Capparidaceae), Laetia corymbutosa(Flacourtiaceae) and Vitex cymosa(Verbenaceae). The highest basal area per species was 10.2 m2 for Pseudobombax munguba(Bombacaceae). The common species are known to be typical floristic elements of the seasonal varzea forest. Above ground dry biomass was equal to 97 and 255 t ha', respectively. Its chemical composition is characterized by comparatively high bioelement contents equal to 2.4 percent on the average. Calcium was the most important bioelement. Structure of the forest and age darings of trees allow the successional classification of the stands.

Using stated preference methods to assess environmental impacts of forest biomass power plants in Portugal

As a renewable energy source, the use of forest biomass for electricity generation is advantageous in comparison with fossil fuels, however the activity of forest biomass power plants causes adverse impacts, affecting particularly neighbouring communities. The main objective of this study is to estimate the effects of the activity of forest biomass power plants on the welfare of two groups of stakeholders, namely local residents and the general population and we apply two stated preference methods: contingent valuation and discrete choice experiments, respectively. The former method was applied to estimate the minimum compensation residents of neighbouring communities of two forest biomass power plants in Portugal would be willing to accept. The latter method was applied among the general population to estimate their willingness to pay to avoid specific environmental impacts. The results show that the presence of the selected facilities affects individuals’ well-being. On the other hand, in the discrete choice experiments conducted among the general population all impacts considered were significant determinants of respondents’ welfare levels. The results of this study stress the importance of performing an equity analysis of the welfare effects on different groups of stakeholders from the installation of forest biomass power plants, as their effects on welfare are location and impact specific. Policy makers should take into account the views of all stakeholders either directly or indirectly involved when deciding crucial issues regarding the sitting of new forest biomass power plants, in order to achieve an efficient and equitable outcome.

Wood specific gravity of trees and forest types in the southern Peruvian Amazon

Estimates of terrestrial biomass depend critically on reliable information about the specific gravity of the wood of forest trees. The study reported on here was carried out in the southern Peruvian Amazon and involved collection of wood samples from trees (70 spp.) in intact forest stands. Results demonstrate the high degree of variability in specific gravity (ovendry weight/green volume) in trees at single locations. Three forest types (swamp, high terrace forest with alluvial soil, and sandy-soil forest) had values close to the average reported for tropical forest woods (.69). Two early successional forest types, which make up as much as 12% of the total vegetated area in this part of the Amazon, had values significantly lower (.40). An increase in specific gravity with increasing age of the tree, which has been reported in some spe cies of tropical-forest woods, is seen in a positive relationship between specific gravity and di ameter for a species prevalent in one plot. Increases in specific gravity with tree and forest age may be significant in estimating changes in carbon stores over time.

A review of squeaking in ceramic total hip prostheses

The occurrence of audible squeaking in some patients with ceramic-on-ceramic (CoC) hip prostheses is a cause for concern. Considering multifactor contributing to this phenomenon, many studies have been conducted over the last decade. Great efforts have been put on understanding the mechanics of the hip squeaking to gain a deep insight into factors resulting in sound emission from hip articulation. Disruption of fluid-film lubrication and friction were reported as main potential causes of hip squeaking, while patient and surgical factors as well as design and material of hip implants were identified as affecting factors. This review article therefore summarised the recent available literature on this subject to provide a platform for future developments. Moreover, high wear rates and ceramic liner fracture as viable consequences of hip squeaking were discussed.

Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material

Nowadays, the concrete production sector is challenged by attempts to minimize the usage of raw materials and energy consumption, as well as by environmental concerns. Therefore, it is necessary to choose better options, e.g. new technologies or materials with improved life-cycle performance. One solution for using resources in an efficient manner is to close the materials' loop through the recycling of materials that result either from the end-of-life of products or from being the by-product of an industrial process. It is well known that the production of Portland cement, one of the materials most used in the construction sector, has a significant contribution to the environmental impacts, mainly related with carbon dioxide emission. Therefore, the study and utilization of by-products or wastes usable as cement replacement in concrete can supply more sustainable options, provided that these type of concrete produced has same durability and equivalent quality properties as standard concrete. This work studied the environmental benefits of incorporating different percentages of two types of fly ashes that can be used in concrete as cement replacement. These ashes are waste products of power and heat production sectors using coal or biomass as fuels. The results showed that both ashes provide a benefit for the concrete production both in terms of environmental impact minimization and a better environmental performance through an increase in cement replacement. It is possible to verify that the incorporation of fly ashes is a sustainable option for cement substitution and a possible path to improve the environmental performance of the concrete industry.

Soil mineral N dynamics beneath mixtures of leaves from legume and fruit trees in Central Amazonian multi-strata agroforests

Long term applications of leguminous green mulch could increase mineralizable nitrogen (N) beneath cupuaçu trees produced on the infertile acidic Ultisols and Oxisols of the Amazon Basin. However, low quality standing cupuaçu litter could interfere with green mulch N release and soil N mineralization. This study compared mineral N, total N, and microbial biomass N beneath cupuaçu trees grown in two different agroforestry systems, north of Manaus, Brazil, following seven years of different green mulch application rates. To test for net interactions between green mulch and cupuaçu litter, dried gliricidia and inga leaves were mixed with senescent cupuaçu leaves, surface applied to an Oxisol soil, and incubated in a greenhouse for 162 days. Leaf decomposition, N release and soil N mineralization were periodically measured in the mixed species litter treatments and compared to single species applications. The effect of legume biomass and cupuaçu litter on soil mineral N was additive implying that recommendations for green mulch applications to cupuaçu trees can be based on N dynamics of individual green mulch species. Results demonstrated that residue quality, not quantity, was the dominant factor affecting the rate of N release from leaves and soil N mineralization in a controlled environment. In the field, complex N cycling and other factors, including soil fauna, roots, and microclimatic effects, had a stronger influence on available soil N than residue quality.

Biomass accumulation, photochemical efficiency of photosystem II, nutrient contents and nitrate reductase activity in young rosewood plants (Aniba rosaeodora Ducke) submitted to different NO3-:NH4+ ratios

The rosewood (Aniba rosaeodora Ducke) is a native tree species of Amazon rainforest growing naturally in acidic forest soils with reduced redox potential. However, this species can also been found growing in forest gaps containing oxide soils. Variations in the forms of mineral nitrogen (NO3- or NH4+) may be predicted in these different edaphic conditions. Considering that possibility, an experiment was carried out to analyze the effects of different NO3-:NH4+ ratios on the growth performance, mineral composition, chloroplastid pigment contents, photochemical efficiency photosystem II (PSII), and nitrate redutase activity (RN, E.C.1.6.6.1) on A. rosaeodora seedlings. Nine-month-old seedlings were grown in pots with a washed sand capacity of 7.5 kg and submitted to different NO3-:NH4+ ratios (T1 = 0:100%, T2 = 25:75%, T3 = 50:50%, T4 = 75:25%, and T5 = 100:0%). The lowest relative growth rate was observed when the NO3-:NH4+ ratio was equal to 0:100%. In general, high concentrations of NO3- rather than NH4+ favored a greater nutrient accumulation in different parts of the plant. For the chloroplastid pigment, the highest Chl a, Chl b, Chl tot, Chl a/b and Chl tot/Cx+c contents were found in the treatment with 75:25% of NO3-:NH4+, and for Chl b and Cx+c it was observed no difference. In addition, there was a higher photochemical efficiency of PSII (Fv/Fm) when high NO3- concentrations were used. A linear and positive response for the nitrate reductase activity was recorded when the nitrate content increased on the culture substrate. Our results suggest that A. rosaeodora seedlings have a better growth performance when the NO3- concentrations in the culture substrate were higher than the NH4+ concentrations.

Methodological limitations of counting total leukocytes and thrombocytes in reptiles (Amazon turtle, Podocnemis expansa): an analysis and discussion

The aim of this paper is to compare three different methods for counting white blood cells [WBC] (Natt and Herrick method, estimation with 1,000 and 2,000 erythrocytes) and three methods for counting total thrombocytes [TT] (Wojtaszek method, estimation with 1,000 and 2,000 erythrocytes) in a South American freshwater turtle species, Podocnemis expansa, Schweigger 1812 (Reptilia, Pelomedusidae). Direct WBC counts using the Natt and Herrick method showed limitations, which are discussed here. The WBC and TT counts using 1,000 erythrocytes from blood smears are not recommended for Amazon turtles nor other reptilian species, since wide variation in counts can be observed. Estimation methods for determining WBC and TT based on 2,000 erythrocytes of blood smears were most acceptable because they allow a differentiation between leukocytes and thrombocytes and also had a smaller variation. The methods investigated here for the Amazon turtle, which have been widely used in other reptile species, provided evidence that the most acceptable method is not that of using diluted stains and a hemocytometer.

Measurements of the Total and Differential Higgs Boson Production Cross Sections Combining the H→γγ and H→ZZ∗→4ℓ Decay Channels at s√=8 TeV with the ATLAS Detector

Measurements of the total and differential cross sections of Higgs boson production are performed using 20.3 fb−1 of pp collisions produced by the Large Hadron Collider at a center-of-mass energy of s√=8 TeV and recorded by the ATLAS detector. Cross sections are obtained from measured H→γγ and H→ZZ∗→4ℓ event yields, which are combined accounting for detector efficiencies, fiducial acceptances and branching fractions. Differential cross sections are reported as a function of Higgs boson transverse momentum, Higgs boson rapidity, number of jets in the event, and transverse momentum of the leading jet. The total production cross section is determined to be σpp→H=33.0±5.3(stat)±1.6(sys)pb. The measurements are compared to state-of-the-art predictions.

Quantificação de cianeto total nas etapas de processamento das farinhas de mandioca dos grupos seca e d'água

O objetivo deste trabalho foi quantificar a concentração de cianeto total durante as etapas de produção da farinha de mandioca dos grupos seca e d'água. Em relação à farinha seca, a concentração de cianeto total na raiz de mandioca diminuiu de 160±11,8 mg HCN/kg para 149±12,3 mg HCN/kg após a trituração, 68±2,5 mg HCN/kg após a prensagem e chegando a 5±0,2 mg HCN/kg no produto final, após o processo de torração. Na produção da farinha d'água, a raiz de mandioca apresentava teor de cianeto total de 321±21,6 mg HCN/kg e durante o processo de fermentação da raiz, o teor de cianeto total nas primeiras 24 horas de fermentação era de 297±2,7 mg HCN/kg chegando a 64±2,3 mg HCN/kg após 96 horas em repouso no tanque. Após trituração e prensagem da massa fermentada, os valores diminuíram para 50±0,6 e 36±0,4 mg HCN/kg, respectivamente, obtendo-se no produto final a concentração de 9±0,1 mg HCN/kg, sendo evidenciado a eficiência do processo de destoxificação em ambos os processamentos.

Distribuição de mercúrio total em sedimentos da plataforma continental Amazônica: Brasil

Este estudo foi desenvolvido na Plataforma Continental do Amazonas (PCA) com o objetivo de determinar os níveis de Hg total no sedimento de fundo, e assim contribuir como matriz ambiental indicadora para o plano geral de gerenciamento costeiro na região norte do Brasil. Foram amostrados 20 pontos entre maio e junho dos anos de 1999 a 2002, 2005 e 2007. Os resultados indicam não haver evidências de atividades antrópicas relacionadas à contaminação de mercúrio na região. Os teores encontrados variaram entre 0,047 e 0,166 mg kg-1 com média 0,085±0,026 mg kg-1, estando dentro do intervalo de "background" referido para os rios amazônicos não contaminados, que é de 0,05 a 0,28 mg kg-1. As concentrações de Hg no sedimento, especialmente no sedimento lamoso, mostraram uma estreita dependência com os teores de argila (material fino) e matéria orgânica, corroborando mecanismos geoquímicos importantes na dinâmica do metal. A maior adsorção do mercúrio pode estar associada ao aumento dos teores de compostos (óxidos e hidróxidos) de ferro, alumínio, manganês e os minerais primários e secundários formadores das rochas da bacia de drenagem amazônica.

Biomass production and essential oil yield from leaves, fine stems and resprouts using pruning the crown of Aniba canelilla (H.B.K.) (Lauraceae) in the Central Amazon

Aniba canelilla (H.B.K.) Mez. is a tree species from Amazon that produces essential oil. The oil extraction from its leaves and stems can be an alternative way to avoid the tree cutting for production of essential oil. The aim of this study was to analyse factors that may influence the essential oil production and the biomass of resprouts after pruning the leaves and stems of A. canelilla trees. The tree crowns were pruned in the wet season and after nine months the leaves and stems of the remaining crown and the resprouts were collected, in the dry season. The results showed that the essential oil yield and chemical composition differed among the stems, leaves and resprouts. The stems' essential oil production differed between the seasons and had a higher production in the resprouting stems than the old stems of the remaining crown. The production of essential oil and leaf biomass of resprouts were differently related to the canopy openness, indicating that light increases the production of the essential oil and decreases the biomass of resprouting leaves. This study revealed that plant organs differ in their essential oil production and that the canopy openness must be taken into account when pruning the A. canelilla tree crown in order to achieve higher oil productivity.

Brachyuran crustaceans from the bycatch of prawn fisheries at the mouth of the Amazon river

The present paper is a pioneering study on the Brachyura bycatch associated with the artisan prawn fisheries at the mouth of the Amazon River. The study was conducted at four collection sites distributed along the mouth of the Amazon River between the months of January/2009 and January/2010. The animals were caught using handcrafted traps called "matapi", which are used by prawn fisherman in the region. Twenty matapis were used at each collection site. A total of 145 specimens were captured and six species were identified, all belonging to the Trichodactylidae family - Sylviocarcinus maldonadoensis, S. pictus, S. devillei, Valdivia serrata, Dilocarcinus septemdentatus and D. pagei. The most representative species, S. maldonadoensis, S. pictus and S. devillei were classified as regular. Regarding the composition of the capture, there were three specimens of D. pagei , only one male specimen of D. septemdentatus, forty-eight specimens of S. maldonadoensis, sixty-eight specimens of S. pictus, twenty-two specimens of S. devillei and three specimens of V. serrata. In all months, the brachyuran fauna showed a considerably lower biomass when compared to the prawns, representing only 5% of the catch, in a ratio of 1:0.06. For most species, the number of males was always higher than the number of females in almost all collection months.