Efeito da temperatura no armazenamento de uvas apirênicas minimamente processadas

O trabalho teve como objetivo avaliar a qualidade pós-colheita de três cultivares de uvas de mesa sem semente submetidas ao processamento mínimo e armazenadas sob refrigeração e à temperatura ambiente. Para tanto, foram utilizadas uvas das cultivares BRS Clara, BRS Linda e BRS Morena, produzidas na Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Uva e Vinho/Estação Experimental de Viticultura Tropical, em Jales-SP. Os cachos, depois de higienizados e imersos em água clorada a 200 mg de cloro.L-1 por 5 minutos, foram mantidos em câmara fria, a 12ºC, por 12 h. As bagas foram degranadas e lavadas em solução de álcool a 70%, por 5 segundos. Depois de escorrido o excesso da solução alcoólica, as bagas foram acondicionadas em bandejas de tereftalato de polietileno (PET) transparente com tampa e com capacidade para 500 mL. Cada unidade, contendo 200 g de bagas, foi armazenada a 12±1,8ºC e 24±0,8ºC, por 12 dias. Avaliaram-se, a cada três dias, a perda de massa fresca, a aparência, a coloração e os teores de sólidos solúveis (SS) e de acidez titulável (AT). A temperatura de 12ºC manteve a turgidez, a coloração, as qualidades organoléptica (relação SS/AT) e comercial das bagas das três cultivares testadas, por nove dias, enquanto no armazenamento à temperatura ambiente (24ºC), ocorre perda da qualidade comercial das bagas aos três dias para as cvs. BRS Clara e BRS Linda, e aos seis dias para a cv. BRS Morena.

Conservação pós-colheita de goiabas 'Kumagai': efeito do estádio de maturação e da temperatura de armazenamento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho, Temperatura Corporal e Qualidade dos Ovos de Poedeiras Alimentadas com Vitaminas D e C em Três Temperaturas Ambiente

O experimento foi conduzido em câmara climática para determinar os efeitos das vitaminas D3 e C sobre o desempenho, temperatura corporal e qualidade dos ovos de poedeiras em três temperaturas: termoneutra (24,8º a 27,0º C), estresse calórico cíclico (26,2º C por 16h e 32,1º C por 8h) e estresse calórico constante (30,0º a 32,0º C). Foram utilizadas 144 galinhas brancas com 31 semanas num delineamento inteiramente ao acaso em arranjo fatorial 3x3x3: vitamina D3 (2500, 3000 e 3500 UI/kg), vitamina C (0, 200 e 400 ppm) e temperatura ambiente (termoneutra, estresse calórico cíclico e constante). As características avaliadas foram: consumo de ração (CR), produção de ovos (PO), peso dos ovos (PE), massa de ovos (MO), conversão alimentar (CA), porcentagens de albúmem (AL) e de gema (GE), unidade Haugh (UH), índice de gema (IG), porcentagem de casca (PC), espessura de casca (EC), gravidade específica dos ovos (GO), temperaturas dorsal (TD) e retal (TR). A vitamina D3 interferiu nas características PC, EC, GO e TD; a vitamina C no IG, PC e GO. A temperatura ambiente não afetou somente a UH. Concluiu-se que níveis mais altos de vitamina D3 e níveis de 200 ou 400 ppm de vitamina C na dieta podem melhorar a qualidade da casca e que o estresse calórico prejudicou as principais características avaliadas.

Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico

This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technological option for the high-frequency electronic power converters development. The resonant converter operates at 50 kW output power under a 400 kHz frequency and it is constituted by inverter cells using ultra-fast IGBT devices. In order to minimize the turn-off losses, the inverter cells operates in a ZVS mode referred by a modified PLL loop that maintains this condition stable, despite the load variations. The sequential pulse gating command strategy used it allows to operate the IGBT devices on its maximum power limits using the derating and destressing current scheme, as well as it propitiates a frequency multiplication of the inverters set. The output converter is connected to a series resonant circuit constituted by the applicator ICTP torch, a compensation capacitor and an impedance matching RF transformer. At the final, are presented the experimental results and the many tests achieved in laboratory as form to validate the proposed new technique

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Efeito da temperatura ambiente e do sistema de criação sobre as exigências de energia metabolizável para mantença de aves reprodutoras pesadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bianisotropia uniaxial em estruturas irradiantes com multicamadas e supercondutores

This work presents a theoretical and numerical analysis of parameters of a rectangular microstrip antenna with bianisotropic substrate, and including simultaneously the superconducting patch. The full-wave Transverse Transmission Line - TTL method, is used to characterize these antennas. The bianisotropic substrate is characterized by the permittivity and permeability tensors, and the TTL gives the general equations of the electromagnetic fields of the antennas. The BCS theory and the two fluids model are applied to superconductors in these antennas with bianisotropic for first time. The inclusion of superconducting patch is made using the complex resistive boundary condition. The resonance complex frequency is then obtained. Are simulated some parameters of antennas in order to reduce the physical size, and increase the its bandwidth. The numerical results are presented through of graphs. The theoretical and computational analysis these works are precise and concise. Conclusions and suggestions for future works are presented