Assessment of toxicological interactions of benzene and its primary degradation products (catechol and phenol) using a lux-modified bacterial bioassay

A bacterial bioassay has been developed to assess the relative toxicities of xenobiotics commonly found in contaminated soils, rivers, waters, and ground waters. The assay utilized decline in luminescence of lux- marked Pseudomonas fluorescens on exposure to xenobiotics. Pseudomonas fluorescens is a common bacterium in the terrestrial environment, providing environmental relevance to soil, river, and ground water systems. Three principal environmental contaminants associated with benzene degradation were exposed to the luminescence-marked bacterial biosensor to assess their toxicity individually and in combination. Median effective concentration (EC50) values for decline in luminescence were determined for benzene, catechol, and phenol and were found to be 39.9, 0.77, and 458.6 mg/L, respectively. Catechol, a fungal and bacterial metabolite of benzene, was found to be significantly more toxic to the biosensor than was the parent compound benzene, showing that products of xenobiotic biodegradation may be more toxic than the parent compounds. Combinations of parent compounds and metabolites were found to be significantly more toxic to the bioassay than were the individual compounds themselves. Development of this bioassay has provided a rapid screening system suitable for assessing the toxicity of xenobiotics commonly found in contaminated soil, river, and ground-water environments. The assay can be utilized over a wide pH range and is therefore more applicable to such environmental systems than bioluminescence-based bioassays that utilize marine organisms and can only be applied over a limited pH and salinity range.

A study protocol for a pilot randomised trial of a structured education programme for the self-management of type 2 diabetes for adults with intellectual disabilities

BACKGROUND: The need for structured education programmes for type 2 diabetes is a high priority for many governments around the world. One such national education programme in the United Kingdom is the DESMOND Programme, which has been shown to be robust and effective for patients in general. However, these programmes are not generally targeted to people with intellectual disabilities (ID), and robust evidence on their effects for this population is lacking. We have adapted the DESMOND Programme for people with ID and type 2 diabetes to produce an amended programme known as DESMOND-ID. This protocol is for a pilot trial to determine whether a large-scale randomised trial is feasible, to test if DESMOND-ID is more effective than usual care in adults with ID for self-management of their type 2 diabetes, in particular as a means to reduce glycated haemoglobin (Hb1Ac), improve psychological wellbeing and quality of life and promote a healthier lifestyle. This protocol describes the rationale, methods, proposed analysis plan and organisational and administrative details.

METHODS/DESIGN: This trial is a two arm, individually randomised, pilot trial for adults with ID and type 2 diabetes, and their family and/or paid carers. It compares the DESMOND-ID programme with usual care. Approximately 36 adults with mild to moderate ID will be recruited from three countries in the United Kingdom. Family and/or paid carers may also participate in the study. Participants will be randomly assigned to one of two conditions using a secure computerised system with robust allocation concealment. A range of data will be collected from the adults with ID (biomedical, psychosocial and self-management strategies) and from their carers. Focus groups with all the participants will assess the acceptability of the intervention and the trial.

DISCUSSION: The lack of appropriate structured education programmes and educational materials for this population leads to secondary health conditions and may lead to premature deaths. There are significant benefits to be gained globally, if structured education programmes are adapted and shown to be successful for people with ID and other cognitive impairments.

TRIAL REGISTRATION: Registered with International Standard Randomised Controlled Trial (identifier: ISRCTN93185560 ) on 10 November 2014.

Sustainable binders for concrete: a structured approach from waste screening to binder composition development

Worldwide, the building sector requires the production of 4 billion tonnes of cement annually, consuming more than 40% of global energy. Alkali activated “cementless” binders have recently emerged as a novel eco-friendly construction material with a promising potential to replace ordinary Portland cement. These binders consist of a class of inorganic polymer formed mainly by the reaction between an alkaline solution and an aluminosilicate source. Precursor materials for this reaction can be found in secondary material streams from different industrial sectors, from energy to agro-alimentary. However, the suitability of these materials in developing the polymerisation reaction must be assessed through a detailed chemical and physical characterisation, ensuring the availability of required chemical species in the appropriate quantity and physical state. Furthermore, the binder composition needs to be defined in terms of proper alkali activation dosages, water content in the mix, and curing conditions. The mix design must satisfy mechanical requirements and compliance to desired engineering properties (workability, setting time) for ensuring the suitability of the binder in replacing Portland cement in concrete applications. This paper offers a structured approach for the development of secondary material-based binders, from their identification to mix design and production procedure development. Essential features of precursor material can be determined through chemical and physical characterisation methods and advanced microscope techniques. Important mixing parameters and binder properties requirements are examined and some examples of developed binders are reported.

Suitability, efficiency and microbiological safety of novel physical technologies for the processing of ready-to-eat meals, meats and pumpable products

Consumer studies and market reports show an increase in consumption of ready-to-eat (RTE) foods. Although conventional processing technologies can in most cases produce safe products, they can also lead to the degradation of nutritional compounds and negatively affect quality characteristics. Consumers strongly prefer food that is minimally processed with the maximum amount of health-promoting substances. Novel processing technologies as pre- or post-treatment decontamination methods or as substitutes of conventional technologies have the potential to produce foods that are safe, rich in nutrient content and with superior organoleptic properties. Combining novel with conventional processes can eliminate potential drawbacks of novel technologies. This review examines available scientific information and critically evaluates the suitability and efficiency of various novel thermal and nonthermal technologies in terms of microbial safety, quality as well as nutrient content on the production of RTE meals, meats and pumpable products.

Dual interfacial modifications of hierarchically structured iodine-doped ZnO photoanodes for high-efficiency dye-sensitized solar cells

A nanocomposite porous electrode structure consisting of hierarchical iodine-doped zinc oxide (I-ZnO) aggregates combined with the two simple solution-processed interfacial modifications i.e. a ZnO compact layer (CL) and a TiO2 protective layer (PL) has been developed in order to understand electron transport and recombination in the photoanode matrix, together with boosting the conversion efficiency of I-ZnO based dye-sensitized solar cells (DSCs). Electrochemical impedance spectra demonstrate that ZnO CL pre-treatment and TiO2 PL post-treatment synergistically reduce charge-transfer resistance and suppress electron recombination. Furthermore, the electron lifetime in two combined modifications of IZnO + CL + PL photoelectrode is the longest in comparison with the other three photoelectrodes. As a consequence, the overall conversion efficiency of I-ZnO + CL + PL DSC is significantly enhanced to 6.79%, with a 36% enhancement compared with unmodified I-ZnO DSC. Moreover, the stability of I-ZnO + CL + PL cell is improved as compared to I-ZnO one. The mechanism of electron transfer and recombination upon the introduction of ZnO CL and TiO2 PL is also proposed in this work.

Common Themes in Multi-block Structured Quad/Hex Mesh Generation

The automatic generation of structured multi-block quadrilateral (quad) and hexahedral (hex) meshes has been researched for many years without definitive success. The core problem in quad / hex mesh generation is the placement of mesh singularities to give the desired mesh orientation and distribution [1]. It is argued herein that existing approaches (medial axis, paving / plastering, cross / frame fields) are actually alternative views of the same concept. Using the information provided by the different approaches provides additional insight into the problem.

Analysis of the Second Harmonic Effect on Power Amplifier Intermodulation Products

A theoretical analysis is reported in this paper to investigate the effect that a second harmonic signal which might be present at an amplifier’s input has on generating additional intermodulation products, particularly the third-order intermodulation (IM3) products. The analysis shows that the amplitude of an extra generated IM3 component is equal to the product of the fundamental amplitude, the second harmonic amplitude, and the second order Taylor series coefficient. The effect of the second order harmonic on the IM3 is examined through a simulated example of a 2.22-GHz 10-W Class-EF amplifier whereby the IM3 levels have been reduced by 2-3 dB after employing a second harmonic termination stub at the input.

Cement As a Waste Form for Nuclear Fission Products: The Case of 90Sr and Its Daughters

One of the main challenges faced by the nuclear industry is the long-term confinement of nuclear waste. Because it is inexpensive and easy to manufacture, cement is the material of choice to store large volumes of radioactive materials, in particular the low-level medium-lived fission products. It is therefore of utmost importance to assess the chemical and structural stability of cement containing radioactive species. Here, we use ab initio calculations based on density functional theory (DFT) to study the effects of ⁹⁰Sr insertion and decay in C-S-H (calcium-silicate-hydrate) in order to test the ability of cement to trap and hold this radioactive fission product and to investigate the consequences of its β-decay on the cement paste structure. We show that ⁹⁰Sr is stable when it substitutes the Ca²⁺ ions in C-S-H, and so is its daughter nucleus ⁹⁰Y after β-decay. Interestingly, ⁹⁰Zr, daughter of ⁹⁰Y and final product in the decay sequence, is found to be unstable compared to the bulk phase of the element at zero K but stable when compared to the solvated ion in water. Therefore, cement appears as a suitable waste form for ⁹⁰Sr storage.

Exploiting evidence from unstructured data to enhance master data management

Master data management (MDM) integrates data from multiple
structured data sources and builds a consolidated 360-
degree view of business entities such as customers and products.
Today’s MDM systems are not prepared to integrate
information from unstructured data sources, such as news
reports, emails, call-center transcripts, and chat logs. However,
those unstructured data sources may contain valuable
information about the same entities known to MDM from
the structured data sources. Integrating information from
unstructured data into MDM is challenging as textual references
to existing MDM entities are often incomplete and
imprecise and the additional entity information extracted
from text should not impact the trustworthiness of MDM
data.
In this paper, we present an architecture for making MDM
text-aware and showcase its implementation as IBM InfoSphere
MDM Extension for Unstructured Text Correlation,
an add-on to IBM InfoSphere Master Data Management
Standard Edition. We highlight how MDM benefits from
additional evidence found in documents when doing entity
resolution and relationship discovery. We experimentally
demonstrate the feasibility of integrating information from
unstructured data sources into MDM.

Neurology assessment by objective structured video examination (OSVE)

Summary
Background
The ability to carry out a neurological examination and make an appropriate differential diagnosis is one of the mainstays of our final Bachelor of Medicine (MB) exam; however, with the introduction of objective structured clinical examinations (OSCEs) it has become impossible to arrange for adequate numbers of suitable real patients to participate in the exam.

Context
It is vital that newly qualified doctors can perform a basic neurological examination, interpret the physical signs and formulate a differential diagnosis.

It is vital that newly qualified doctors can perform a basic neurological examination

Innovation
Since 2010 we have introduced an objective structured video examination (OSVE) of a neurological examination of a real patient as part of our final MB OSCE exam. The students view clips of parts of the examination process. They answer questions on the signs that are demonstrated and formulate a differential diagnosis.

Implications
This type of station is logistically a lot easier to organise than a large number of real patients at different examination sites. The featured patients have clearly demonstrated signs and, as every student sees the same patient, are perfectly standardised. It is highly acceptable to examiners and performed well as an assessment tool. There are, however, certain drawbacks in that we are not examining the student's examination technique or their interaction with the patient. Also, certain signs, in particular the assessment of muscle tone and power, are more difficult for a student to estimate in this situation

Effects of tobacco products on the attachment and growth of periodontal ligament fibroblasts

BACKGROUND: Cigarette smoking is one of the most significant risk factors in the development and further advancement of inflammatory periodontal disease, however, the role of either nicotine or its primary metabolite cotinine in the progression of periodontitis is unclear. This study aimed to investigate the effects of nicotine and cotinine on the attachment and growth of fibroblasts derived from human periodontal ligament (PDL).

METHODS: Primary cultures were prepared from the roots of extracted premolar teeth. Cells were used at both low (P3 to P5) and high (P11 to P13) passage. Cell numbers were determined over 14 days using either the 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay or with a Coulter counter. Cultures were exposed to culture medium supplemented with 1) 15% fetal calf serum (FCS) only; 2) 1% FCS only; 3) 1% FCS and nicotine (concentration range 5 ng/ml to 10 mg/ml); or 4) 1% FCS and cotinine (concentration range 0.5 ng/ml to 10 microg/ml).

RESULTS: Nicotine significantly (P <0.05, by ANOVA) inhibits attachment and growth of low passage cells at concentrations >1 mg/ml and high passage PDL fibroblasts at concentrations >0.5 mg/ml. Cotinine, at the highest concentration used (10 microg/ml), appeared to inhibit attachment and growth of both low and high passage fibroblasts but this was not statistically significant (P >0.05, by ANOVA).

CONCLUSIONS: Tobacco products inhibit attachment and growth of human PDL fibroblasts. This may partly explain the role of these substances in the progression of periodontitis.