Modelling of ellipsoidal nanowires : control and application

The properties of ellipsoidal nanowires are yet to be examined. They have likely applications in sensing, solar cells, microelectronics and cloaking devices. Little is known of the qualities that ellipse nanowires exhibit as we vary the aspect ratio with different dielectric materials and how varying these attributes affects plasmon coupling and propagation. It is known that the distance a plasmon can travel is further if it is supported by a thicker circular nanowire, while thinner nanowires are expected to be able to increase QD coupling. Ellipsoidal nanowires may be a good compromise due to their ability to have both thin and thick dimensions. Furthermore it has been shown that the plasmon resonances along the main axis of an ellipsoidal particle is governed by the relative aspect ratio of the ellipsoid, which may lead to further control of the plasmon. Research was done by the use of COMSOL Multiphysics by looking at the fundamental plasmon mode supported by an ellipsoidal nanowire and then studying this mode for various geometrical parameters, materials and illumination wavelength. Accordingly it was found that ellipsoidal nanowires exhibit a minimum for the wavenumber and a maximum for the propagation distance at roughly the same dimensions - Highlighting that there is an aspect ratio for which there is poor coupling but low loss. Here we investigate these and related attributes.

Does sustainable housing construction provide the home owner with a greater investment return?

Over the past 20 years there has been a considerable push at all three tiers of Government and private industry in Australia to improve the energy efficiency and sustainability levels of residential housing. A number of these initiatives have been voluntary, such as solar power and solar heating rebates, with other mandatory measures being incorporated into building standards and codes. Although the importance of energy efficiency and sustainable materials have been widely conveyed both at the academic and public level, it does not always reflect in the residential house purchase decision by typical house buyers, including residential property investors. This paper will analyse a range of housing markets in Brisbane to determine the investment performance of those markets over the past 3 years to determine any significant differences between new residential suburbs and older residential suburbs where houses have not been constructed to the current energy efficiency and sustainability guidelines. The range of suburbs to be analysed will focus on middle to lower high value suburbs, with a particular focus on residential housing in Master Planned Communities to determine if socio-economic factors and development size and scope have an impact of the purchase and investment performance of sustainable houses in comparison to older housing stock. The paper confirms that the residential property market shows a higher capital return for residential property built under stricter sustainability guidelines than similar located and type of property built prior to the BCA 2004 and older style project type homes erected prior to 2000.

Facebook, telecollaboration, and international access to technology in the classroom

This study uses the well-known social networking site, Facebook (FB), for a study of differences in perceptions on the use of technologies in the classroom around the world. This study is part of a larger project exploring telecollaboration and the use of online discussions between graduate students in an online masters program based in Australia and students in the graduate education program at a regional university in Greece. Postings reveal more similarities between the situations and perceptions of the participants from the different countries than differences. Most participants indicated that while they and their students had access in general to computers and the internet, they did not necessarily have this access in the classroom. Even when technologies were available in schools, participants identified a critical need for professional development to increase teachers’ use of ICT. These findings are relevant to educators and policy development in terms of implementation of ICT or social networking in the language classroom.

Redistribution and technology adoption under uncertainty : a political economy perspective

We examine the role of politico-economic influences on macroeconomic performance within the framework of an endogenous growth model with costly technology adoption and uncertainty. The model is aimed at understanding the diversity in growth and inequality experiences across countries. Agents adopt either of two risky technologies, one of which is only available through financial intermediaries, who are able to alleviate some of this risk. The entry cost of financial intermediation depends on the proportion of government revenue that is allocated towards cost-reducing financial development expenditure, and agents vote on this proportion. The results show that agents at the top and bottom ends of the distribution prefer alternative means of re-distribution, thereby effectively blocking the allocation of resources towards cost-reducing financial development expenditure. Thus political factors have a role in delaying financial and capital deepening and economic development. Furthermore, the model provides a political-economy perspective on the Kuznets curve; uncertainty interacts with the political economy mechanism to produce transitional inequality patterns that, depending on initial conditions, can unearth the Kuznets-curve experience. Finally, the political outcomes are inefficient relative to policies aimed at maximizing the collective welfare of agents in the economy.

Luxury brand identity : the influence of mobile digital technology

This thesis examined the influence of mobile digital technology on the brand identity of luxury brands. Specifically it focused on the use of mobile applications by automobile, hotel and beauty brands and compared the perceptions of marketing managers with consumers on how mobile applications influenced luxury brand identity and image. Outcomes of this research included a model to depict the ongoing process between mobile-mediated luxury brand identity and image, and a typology of luxury brand mobile applications listing key features of mobile-mediated luxemosphere. Overall findings suggest that the influence of mobile applications on luxury brand identity has been negative, as their brand image appeared to be degraded, resulting in diminishing the brand identity.

Design and flight testing of an integrated solar powered UAV and WSN for remote gas sensing

This paper describes a generic and integrated solar powered remote Unmanned Air Vehicles (UAV) and Wireless Sensor Network (WSN) gas sensing system. The system uses a generic gas sensing system for CH4 and CO2 concentrations using metal oxide (MoX) and non-dispersive infrared sensors, and a new solar cell encapsulation method to power the UASs as well as a data management platform to store, analyse and share the information with operators and external users. The system was successfully field tested at ground and low altitudes, collecting, storing and transmitting data in real time to a central node for analysis and 3D mapping. The system can be used in a wide range of outdoor applications, especially in agriculture, bushfires, mining studies, opening the way to a ubiquitous low cost environmental monitoring. A video of the bench and flight test performed can be seen in the following link https://www.youtube.com/watch?v=Bwas7stYIxQ.

The use of artificial MicroRNA technology to control gene expression in Arabidopsis thaliana

In plants, double-stranded RNA (dsRNA) is an effective trigger of RNA silencing, and several classes of endogenous small RNA (sRNA), processed from dsRNA substrates by DICER-like (DCL) endonucleases, are essential in controlling gene expression. One such sRNA class, the microRNAs (miRNAs) control the expression of closely related genes to regulate all aspects of plant development, including the determination of leaf shape, leaf polarity, flowering time, and floral identity. A single miRNA sRNA silencing signal is processed from a long precursor transcript of nonprotein-coding RNA, termed the primary miRNA (pri-miRNA). A region of the pri-miRNA is partially self-complementary allowing the transcript to fold back onto itself to form a stem-loop structure of imperfectly dsRNA. Artificial miRNA (amiRNA) technology uses endogenous pri-miRNAs, in which the miRNA and miRNA*(passenger strand of the miRNA duplex) sequences have been replaced with corresponding amiRNA/ amiRNA*sequences that direct highly efficient RNA silencing of the targeted gene. Here, we describe the rules for amiRNA design, as well as outline the PCR and bacterial cloning procedures involved in the construction of an amiRNA plant expression vector to control target gene expression in Arabidopsis thaliana. © 2014 Springer Science+Business Media New York.

Australian Research to Encourage School Students’ Positive Use of Technology to Reduce Cyberbullying

Information and Communications Technology (ICT) has spread rapidly in Australia. Mobile phones, which increasingly have advanced capabilities including Internet access, mobile television and multimedia storage, are owned by 22% of Australian children aged 9-11 years and 73% of those aged 12-14 years (Australian Bureau of Statistics, 2012b), as well as by over 90% of Australians aged 15 years and over(Australian Communications and Media Authority (ACMA), 2010). Nearly 80% of Australian households have access to the Internet and 73% have a broadband Internet connection, ensuring that Internet access is typically reliable and high-speed (Australian Bureau of Statistics, 2012a). Ninety percent of Australian children aged 5-14 years (comprising 79% of 5-8 year olds; 96% of 9-11 year olds; and 98% of 12-14 year olds) reported having accessed the Internet during 2011-2012, a significant increase from 79% in 2008-2009 (Australian Bureau of Statistics, 2012b). Approximately 90% of 5-14 year olds have accessed the Internet both from home and from school, with close to 49% accessing the Internet from other places (Australian Bureau of Statistics, 2012b). Young people often make use of borrowed Internet access (e.g. in friends’ homes), commercial access (e.g. cybercafés), public access (e.g. libraries), and mobile device access in areas offering free Wi-Fi (Lim, 2009).

The affordances of social technology : a BPM perspective

Increasingly, organizations are looking to employ Social Technology (ST) to enhance their capability with Business Process Improvement (BPI). However, little is known about how the characteristics or qualities of ST actually influence an organizations' capability at Business Process Improvement (BPI). This paper discusses the potential role of ST in process improvement by presenting an a-priory model derived by an investigation of extant research. First, the qualities of social technology that potentially support high level action possibilities related to BPI are presented (we refer to these as affordances), next these affordances are mapped to the De Bruin (2009) BPM Maturity model as a first step to understanding how ST influences BPI. This work is expected to contribute to our knowledge and understanding of the relationship between ST and BPI, and will extend existing theory on Business Process Management capability and maturity.

Mathematical modelling of counter flow v-grove solar air collector

Double-pass counter flow v-grove collector is considered one of the most efficient solar air-collectors. In this design of the collector, the inlet air initially flows at the top part of the collector and changes direction once it reaches the end of the collector and flows below the collector to the outlet. A mathematical model is developed for this type of collector and simulation is carried out using MATLAB programme. The simulation results were verified with three distinguished research results and it was found that the simulation has the ability to predict the performance of the air collector accurately as proven by the comparison of experimental data with simulation. The difference between the predicted and experimental results is, at maximum, approximately 7% which is within the acceptable limit considering some uncertainties in the input parameter values to allow comparison. A parametric study was performed and it was found that solar radiation, inlet air temperature, flow rate and length have a significant effect on the efficiency of the air collector. Additionally, the results are compared with single flow V-groove collector.