A semi-automatic computerized method to measure baroreflex-mediated heart rate responses that reduces interobserver variability

Arterial baroreflex sensitivity estimated by pharmacological impulse stimuli depends on intrinsic signal variability and usually a subjective choice of blood pressure (BP) and heart rate (HR) values. We propose a semi-automatic method to estimate cardiovascular reflex sensitivity to bolus infusions of phenylephrine and nitroprusside. Beat-to-beat BP and HR time series for male Wistar rats (N = 13) were obtained from the digitized signal (sample frequency = 2 kHz) and analyzed by the proposed method (PRM) developed in Matlab language. In the PRM, time series were low-pass filtered with zero-phase distortion (3rd order Butterworth used in the forward and reverse direction) and presented graphically, and parameters were selected interactively. Differences between basal mean values and peak BP (deltaBP) and HR (deltaHR) values after drug infusions were used to calculate baroreflex sensitivity indexes, defined as the deltaHR/deltaBP ratio. The PRM was compared to the method traditionally (TDM) employed by seven independent observers using files for reflex bradycardia (N = 43) and tachycardia (N = 61). Agreement was assessed by Bland and Altman plots. Dispersion among users, measured as the standard deviation, was higher for TDM for reflex bradycardia (0.60 ± 0.46 vs 0.21 ± 0.26 bpm/mmHg for PRM, P < 0.001) and tachycardia (0.83 ± 0.62 vs 0.28 ± 0.28 bpm/mmHg for PRM, P < 0.001). The advantage of the present method is related to its objectivity, since the routine automatically calculates the desired parameters according to previous software instructions. This is an objective, robust and easy-to-use tool for cardiovascular reflex studies.

How computer programmers work : understanding software development in practise

Hur arbetar en framgångsrik programmerare? Uppgifterna att programmera datorspel och att programmera industriella, säkerhetskritiska system verkar tämligen olika. Genom en noggrann empirisk undersökning jämför och kontrasterar avhandlingen dessa två former av programmering och visar att programmering innefattar mer än teknisk förmåga. Med utgångspunkt i hermeneutisk och retorisk teori och med hjälp av både kulturvetenskap och datavetenskap visar avhandlingen att programmerarnas tradition och värderingar är grundläggande för deras arbete, och att båda sorter av programmering kan uppfattas och analyseras genom klassisk texttolkningstradition. Dessutom kan datorprogram betraktas och analyseras med hjälp av klassiska teorier om talproduktion i praktiken - program ses då i detta sammanhang som ett slags yttranden. Allt som allt förespråkar avhandlingen en återkomst till vetenskapens grunder, vilka innebär en ständig och oupphörlig cyklisk rörelse mellan att erfara och att förstå. Detta står i kontrast till en reduktionistisk syn på vetenskapen, som skiljer skarpt mellan subjektivt och objektivt, och på så sätt utgår från möjligheten att uppnå fullständigt vetande. Ofullständigt vetande är tolkandets och hermeneutikens domän. Syftet med avhandlingen är att med hjälp av exempel demonstrera programmeringens kulturella, hermeneutiska och retoriska natur.

Manual and semi-automatic quantification of in vivo ¹H-MRS data for the classification of human primary brain tumors

In vivo proton magnetic resonance spectroscopy (¹H-MRS) is a technique capable of assessing biochemical content and pathways in normal and pathological tissue. In the brain, ¹H-MRS complements the information given by magnetic resonance images. The main goal of the present study was to assess the accuracy of ¹H-MRS for the classification of brain tumors in a pilot study comparing results obtained by manual and semi-automatic quantification of metabolites. In vivo single-voxel ¹H-MRS was performed in 24 control subjects and 26 patients with brain neoplasms that included meningiomas, high-grade neuroglial tumors and pilocytic astrocytomas. Seven metabolite groups (lactate, lipids, N-acetyl-aspartate, glutamate and glutamine group, total creatine, total choline, myo-inositol) were evaluated in all spectra by two methods: a manual one consisting of integration of manually defined peak areas, and the advanced method for accurate, robust and efficient spectral fitting (AMARES), a semi-automatic quantification method implemented in the jMRUI software. Statistical methods included discriminant analysis and the leave-one-out cross-validation method. Both manual and semi-automatic analyses detected differences in metabolite content between tumor groups and controls (P < 0.005). The classification accuracy obtained with the manual method was 75% for high-grade neuroglial tumors, 55% for meningiomas and 56% for pilocytic astrocytomas, while for the semi-automatic method it was 78, 70, and 98%, respectively. Both methods classified all control subjects correctly. The study demonstrated that ¹H-MRS accurately differentiated normal from tumoral brain tissue and confirmed the superiority of the semi-automatic quantification method.

Culture of bovine ovarian follicle wall sections maintained the highly estrogenic profile under basal and chemically defined conditions

Follicle cultures reproduce in vitro the functional features observed in vivo. In a search for an ideal model, we cultured bovine antral follicle wall sections (FWS) in a serum-free defined medium (DM) known to induce 17β-estradiol (E2) production, and in a nondefined medium (NDM) containing serum. Follicles were sectioned and cultured in NDM or DM for 24 or 48 h. Morphological features were determined by light microscopy. Gene expression of steroidogenic enzymes and follicle-stimulating hormone (FSH) receptor were determined by RT-PCR; progesterone (P4) and E2 concentrations in the media were measured by radioimmunoassay. DM, but not NDM, maintained an FWS morphology in vitro that was similar to fresh tissue. DM also induced an increase in the expression of all steroidogenic enzymes, except FSH receptor, but NDM did not. In both DM and NDM, there was a gradual increase in P4 throughout the culture period; however, P4 concentration was significantly higher in NDM. In both media, E2 concentration was increased at 24 h, followed by a decrease at 48 h. The E2:P4 ratio was higher in DM than in NDM. These results suggest that DM maintains morphological structure, upregulates the expression of steroidogenic enzyme genes, and maintains steroid production with a high E2:P4 ratio in FWS cultures.

Software business expansion through distribution channel : Case M-Files - Denmark

The purpose of this study was to find out how a software company can successfully expand business to the Danish software market through distribution channel. The study was commissioned by a Finnish software company and it was conducted using a qualitative research method by analyzing external and internal business environment, and interviewing Danish ICT organizations and M-Files personnel. Interviews were semi-structured interviews, which were designed to collect comprehensive information on the existing ICT and software market in Denmark. The research used three external and internal analyzing frameworks; PEST analysis (market level), Porter´s Five Force analysis (industry level competition) and SWOT analysis (company level). Distribution channels theory was a base to understand why and what kind of distribution channels the case company uses, and what kind of channels target markets companies’ uses. Channel strategy and design were integrated to the industry level analysis. The empirical findings revealed that Denmark has very business friendly ICT environment. Several organizations have ranked Denmark´s information and communication technology as the best in the world. Denmark’s ICT and software market are relatively small, compared to many other countries in Europe. Danish software market is centralized. Largest software clusters are in the largest cities; Copenhagen, Aarhus, Odense and Aalborg. From these clusters, software companies can most likely find suitable resellers. The following growing trends are clearly seen in the software market: mobile and wireless applications, outsourcing, security solutions, cloud computing, social business solutions and e-business solutions. When expanding software business to the Danish market, it is important to take into account these trends. In Denmark distribution channels varies depending on the product or service. For many, a natural distribution channel is a local partner or internet. In the public sector solutions are purchased through a public procurement process. In the private sector the buying process is more straight forwarded. Danish companies are buying software from reliable suppliers. This means that they usually buy software direct from big software vendors or local partners. Some customers prefer to use professional consulting companies. These consulting companies can strongly influence on the selection of the supplier and products, and in this light, consulting companies can be important partners for software companies. Even though the competition is fierce in ECM and DMS solutions, Danish market offers opportunities for foreign companies. Penetration to the Danish market through reseller channel requires advanced solutions and objective selection criteria for channel partners. Based on the findings, Danish companies are interested in advanced and efficient software solutions. Interest towards M-Files solutions was clearly seen and the company has excellent opportunity to expand business to the Danish market through reseller channel. Since the research explored the Danish ICT and software market, the results of the study may offer valuable information also to the other software companies which are expanding their business to the Danish market.

Model-based testing of software systems : functionality and performance

Software is a key component in many of our devices and products that we use every day. Most customers demand not only that their devices should function as expected but also that the software should be of high quality, reliable, fault tolerant, efficient, etc. In short, it is not enough that a calculator gives the correct result of a calculation, we want the result instantly, in the right form, with minimal use of battery, etc. One of the key aspects for succeeding in today's industry is delivering high quality. In most software development projects, high-quality software is achieved by rigorous testing and good quality assurance practices. However, today, customers are asking for these high quality software products at an ever-increasing pace. This leaves the companies with less time for development. Software testing is an expensive activity, because it requires much manual work. Testing, debugging, and verification are estimated to consume 50 to 75 per cent of the total development cost of complex software projects. Further, the most expensive software defects are those which have to be fixed after the product is released. One of the main challenges in software development is reducing the associated cost and time of software testing without sacrificing the quality of the developed software. It is often not enough to only demonstrate that a piece of software is functioning correctly. Usually, many other aspects of the software, such as performance, security, scalability, usability, etc., need also to be verified. Testing these aspects of the software is traditionally referred to as nonfunctional testing. One of the major challenges with non-functional testing is that it is usually carried out at the end of the software development process when most of the functionality is implemented. This is due to the fact that non-functional aspects, such as performance or security, apply to the software as a whole. In this thesis, we study the use of model-based testing. We present approaches to automatically generate tests from behavioral models for solving some of these challenges. We show that model-based testing is not only applicable to functional testing but also to non-functional testing. In its simplest form, performance testing is performed by executing multiple test sequences at once while observing the software in terms of responsiveness and stability, rather than the output. The main contribution of the thesis is a coherent model-based testing approach for testing functional and performance related issues in software systems. We show how we go from system models, expressed in the Unified Modeling Language, to test cases and back to models again. The system requirements are traced throughout the entire testing process. Requirements traceability facilitates finding faults in the design and implementation of the software. In the research field of model-based testing, many new proposed approaches suffer from poor or the lack of tool support. Therefore, the second contribution of this thesis is proper tool support for the proposed approach that is integrated with leading industry tools. We o er independent tools, tools that are integrated with other industry leading tools, and complete tool-chains when necessary. Many model-based testing approaches proposed by the research community suffer from poor empirical validation in an industrial context. In order to demonstrate the applicability of our proposed approach, we apply our research to several systems, including industrial ones.

Ohjelmistotestauksen käytänteet Suomessa

Ohjelmistotestauksen merkitys on kasvanut sen mukaan mitä enemmän ohjelmisto-tuotteet vaikuttavat jokapäiväisesseen elämämme. Tämän vuoksi yritysten investointien ja laadunvarmentamisen yhteys on ilmeinen. Organisaatiot panostavat yhä enemmän ei–funktionaaliseen testaukseen, kuten turvallisuuden, suorituskyvyn ja käytettävyyden testaamiseen. Tämän työn tarkoituksena on tutkia ohjelmistotestauksen nykytilannetta Suomessa. Syy tähän on uudistaa ja parantaa ohjelmistotestauksen kurssitarjontaa Turun yliopistossa vastaamaan parhaalla mahdollisella tavalla yritysten tarvetta. Opinnäyte on toteutettu replikaatio-tutkimuksena. Pääosa kyselystä sisältää kysymyksiä ohjelmistotestauksen menetelmistä ja työkaluista testausprosessin toimintojen aikana. Lisäksi on yleisiä kysymyksiä yrityksistä ja niiden ohjelmistotestausympäristöistä. Kyselyssä otetaan myös kantaa yritysten käyttämiin monenlaisiin testaus-tasoihin, -tyyppeihin ja testauksessa kohdattuihin haasteisiin. Tämä opinnäyte perustuu testausprosessistandardeihin. Ohjelmistotestausstandardit ovat keskeisessä asemassa tässä työssä, vaikka ne ovat olleet viime aikoina vahvan kritiikin kohteena. Epäilys standardien välttämättömyyteen on syntynyt muutoksista ohjelmistokehityksessä. Tämä työ esittelee tulokset ohjelmistotestauksen käytännöistä. Tuloksia on verrattu aiheeseen liittyvän aiemman kyselyn (Lee, Kang, & Lee, 2011) tuloksiin. Ajanpuutteen havaitaan olevan suuri haaste ohjelmistotestauksessa. Ketterä ohjelmistokehitys on saavuttanut suosiota kaikissa vastaajien yrityksissä. Testauksen menetelmät ja työkalut testauksen arviointiin, suunnitteluun ja raportointiin ovat hyvin vähäisessä käytössä. Toisaalta testauksen menetelmien ja työkalujen käyttö automaattiseen testauksen toteuttamiseen ja virheiden hallintaan on lisääntynyt. Järjestelmä-, hyväksyntä-, yksikkö- ja integraatiotestaus ovat käytössä kaikkien vastaajien edustamissa yrityksissä. Kaikkien vastaajien mielestä regressio- sekä tutkiva- ja ei-funktionaalinen testaus ovat tärkeitä tekniikoita.

The best practices in the formation phase of Sino-Finnish joint ventures in China: For Finnish software companies

This study discusses the formation phase of Chinese-Finnish joint ventures in China. The purpose of this thesis is to create best practices for Finnish software companies in forming a joint venture with a local Chinese company in China. Therefore, the main research question, in what are the best practices for forming Sino-Finnish joint ventures in China for Finnish software firms, is examined through four different themes within the joint venture formation phase; the motives, the partner se- lection, the choice of a joint venture type and joint venture negotiations. The theoretical background of the study consists of literature relating to the establishment process of Sino-Western joint ventures in China. The empirical research conducted for this study is based on the expert interviews. The empirical data was gathered via nine semi-structured interviews with both Chinese and Finnish experts in software and technology industry, who have experience or knowledge in establishing Sino-Finnish joint ventures in China. Thematic analysis was used to cat- egorize and interpret the interview data. In addition, a thematic network was built to act as a basis of the analysis. According to the main findings, the main motives for Finnish software companies to establish a joint venture in China are lack of skills or experience, little resources to enter on their own, and China’s large market. The main motives for Chinese companies are to gain new technology or man- agerial skills, and expand internationally. The intellectual property rights (IPR) have recently im- proved a lot in China, but the Finnish companies’ knowledge on IPR is inadequate. The Finnish software companies should conduct a market and industry research in order to understand their po- sition in the market and to find a suitable location and potential joint venture partners. It is essential to define partner selection criteria and partner attributes. In addition, it is important to build the joint venture around complementary motives and a win-win situation between the joint venture partners. The Finnish companies should be prepared that the joint venture negotiations will be challenging and they will take a long time. The challenges can be overcome by gaining understanding about the Chinese culture and business environment. The findings of this study enhance understanding of the joint venture formation phase in China. This study provides guidelines for Finnish software companies to establish a joint venture in China. In addition, this study brings new insights to the Sino-Western joint venture literature with its soft- ware industry context. Future research is, however, necessary in order to gain an understanding of the advantages and disadvantages of a joint venture as an entry mode into China for Finnish soft- ware companies

Networking Notch : regulation of Notch traffic and signaling crosstalk

Utvecklingen av flercelliga organismer är en mångfacetterad process som kräver kommunikation celler emellan. Under utvecklingen av en organism måste cellerna göra vissa val, vilket bestämmer riktningen för deras fortsatta utveckling. Utgående från dessa val erhåller cellerna egenskaper som är karaktäristiska för olika celltyper. Notch-signalräckan är en viktig reglerare av valet mellan olika cellöden. Notch-signalräckan aktiveras när Notch-receptorer som uttrycks på ytan av en cell binder till Notch-ligander som uttrycks på ytan av en annan närliggande cell. Denna avhandling belyser mekanismerna som reglerar omsättningen av såväl Notch-receptorer som -ligander till och från cellmembranen, samt ökar förståelsen för hur dessa mekanismer påverkar Notch-medierade cellöden i stamceller. Internalisering av Notch receptorer anses nödvändigt för fullständig aktivering av Notch-signalvägen. De bakomliggande molekylära mekanismerna är dock fortfarande oklara. Vi har upptäckt att atypiskt protein kinas Cζ (aPKCζ) reglerar internaliseringen av Notch-receptorer. aPKCζ fosforylerar Notch, vilket leder till receptorns internalisering, men effekten är beroende av receptorns signaleringsstatus. Vi visar att aPKCζ reglerar Notch-signaleringen och styr både neuroners och muskelcellers differentiering. Ytterligare har vi analyserat samspelet mellan cellskelettet och Notch-signalvägen. Våra resultat visar att intermediärfilamenten, en del av cellskelettet, är viktiga reglerare av Notch-signaleringen både under neuronal och vaskulär utveckling. Intermediärfilamenten vimentin och GFAP reglerar uttrycket av Notch-ligander vid cellmembranen i hjärnans stödceller, astrocyterna, och påverkar därmed neuronala stamcellers cellödesbeslut. Vimentin är även viktigt reglerare av Notch-signalräckan vid angiogenesen. Celler som saknar vimentin uppvisar avvikande Notch-signalering emedan möss som saknar vimentin påvisar en fördröjd utveckling av vaskulaturen under embryonalstadiet. ------------------------------------------------- Monisoluisten organismien kehittyminen on monimutkainen prosessi, joka vaatii viestintää solujen välillä. Kehittymisen aikana solut joutuvat tiettyjen valintojen eteen, mitkä tulevat määrittämään niiden erilaistumisen suunnan. Solut omaksuvat solutyypille ominaisia ominaisuuksia näihin valintoihin perustuen Notch-signalointireitti säätelee solujen erilaistumista eri suuntiin. Notch-signalointireitti aktivoituu, kun Notch-reseptori yhden solun pinnalla sitoo Notch-ligandin toisen, viereisen solun solukalvolla. Tutkimukseni lisää tuntemusta Notch-reseptoreiden ja ligandien solun sisäisestä liikennöinnistä ja sitä säätelevistä mekanismeista, sekä tämän säätelyn vaikutuksista kantasulojen erilaistumiseen. Notch-signalointireitin aktivoituminen vaatii reseptoreiden ja ligandien sisäistämisen solukalvolta, mutta taustalla olevat ja sisäistymistä säätelevät mekanismit ovat vielä epäselviä. Tutkimukseni osoittaa, että atyyppinen proteiinikinaasi Cζ (aPKCζ) säätelee Notch-reseptoreiden endosytoosia. Endosytoosin lopputulos riippuu siitä onko reseptori aktivoitunut ligandin välityksellä vai ei. Tuloksemme osoittavat aPKCζ säätelevän Notch-signalointia ja kontrolloivan sekä hermosolujen, että lihassolujen erilaistumista. Analysoimme myös Notch-signaloinnin ja solun tukirangan vuorovaikutuksia. Välikokoiset filamentit, jotka ovat osa tukirankaa, säätelevät Notch-signalointia neuronaalisen erilaistumisen sekä verisuonten uudismuodostumisen aikana. Vimentiini ja GFAP ovat välikokoisia säikeitä, jotka säätelevät Notch-ligandien ekspressiota astrosyyttien, eli aivojen hermotukisolujen solukalvolla. Vimentiini säätelee myös Notch-signalointireittiä angiogeneesin aikana. Vimentiiniä vailla olevilla soluilla ilmenee heikentynyttä Notch-signalointia, joka voidaan liittää hiirillä ilmenevään vimenttiinin puutteesta johtuvaan viivästyneeseen verisuonien kehitykseen.