Estimation of ploidy and hybridization status by erythrocyte and nucleus size analysis in carps

The present experiment was designed to observe whether the nuclear volume and area are affected by the ploidy and hybrid status of the individual. Polyploidy was induced by heat shock treatment given at 44 ± 0.5°C for 30 seconds and 45 seconds which was found to be most effective (64.7%) for induction of triploidy in Cyprinus carpio. Cell and nuclear volume and cell and nuclear area varied significantly in triploid fishes as compared to those of controls. Triploid fishes showed significantly higher growth compared to diploid counterparts. It was also observed that catla x rohu hybrid and its parents showed significant difference in the nuclear volume and area of their erythrocytes. Except nuclear volume, all the parameters were significantly different between catla and catla x rohu hybrid. The hybrids showed a closer relationship with catla as compared to rohu.

Biology, stock size and catch of small pelagic fish along the coast of Mozambique

A compilation of all the available information on the main small pelagic fish resources of Mozambican waters is presented. Resource data on distribution areas, reproduction, age, growth and stock size are described. Actual catch and catch per unit of effort of the commercially exploited stocks are also given. Results of the preliminary assessment of the stocks of scad and mackerel and the problems involving the assessment of Kelee shad stock at Maputo Bay are discussed.

East African Inland Fisheries Research Organization Annual Report for year ended 31st December 1949

The present work is now concentrated mainly on the Tilapia fishery. As a result of past experience it is easier to direct efforts in a way likely to give useful results. Work on the Tilapia is now beyond the purely exploratory stage and these fishing experiments are being carried but in areas which are known to contain large numbers of Tilapia. Nets of different mesh size are being used in order to catch all stages of these fish. These nets are being fished at the surface and at the bottom, close to the shore and further out. The data collected should provide more precise information regarding the periodic migration, both vertical and horizontal, of these fish, a better understanding of their life history and breeding habits, and indicate' the potential possibilities of this fishery. These data should explain the variation in numbers of fish caught by Africans during different months of the year; they should also make it possible to determine more exactly the best type of net for use in this particular fishery.

Effect of size, morphology and crystallinity of seed crystal on the nucleation and growth of single grain Y-Ba-Cu-O

The effect of size, morphology and crystallinity of seed crystals on the nucleation and growth of large grain Y-Ba-Cu-O (YBCO) bulk superconductors fabricated by top seeded melt growth (TSMG) has been investigated. Seeding bulk samples with small, square shaped seed crystals leads to point nucleation and growth of the superconducting YBa2Cu3O7-y (Y-123) phase that exhibits the usual square habitual growth symmetry. The use of triangular and circular shaped seed crystals, however, modifies significantly the growth habit geometry of the grain. The use of large area seeds both increases the rate of epitaxial nucleation of the Y-123 phase and produces relatively large crystals in the incongruent melt, which decreases significantly the processing times of large grain samples. The present study is relevant to decrease processing times of samples with both preferred or no growth sectors and for multiple seeding of large grain samples which contain clean grain boundaries. © 2005 Published by Elsevier Ltd.

Tribological properties of mems materials measured on a small-scale device

Micro-electro-mechanical systems, MEMS, is a rapidly growing interdisciplinary technology within the general field of Micro-Systems Technology which deals with the design and manufacture of miniaturised machines with major dimensions at the scale of tens, to perhaps hundreds, of microns. Because they depend on the cube of a representative dimension, component masses and inertias rapidly become small as size decreases whereas surface and tribological effects, which often depend on area, become increasingly important. Although MEMS components and their areas of contact are small, tribological conditions, measured by contact pressures or acceptable wear rates, are demanding and technical and commercial success will require careful measurement and precise control of surface topography and properties. Fabrication of small numbers of MEMS devices designed to test potential material combinations can be prohibitively expensive and thus there is a need for small scale test facilities which mimic the contact conditions within a micro-machine without themselves requiring processing within a full semiconductor foundry. The talk will illustrate some initial experimental results from a small-scale experimental device which meets these requirements, examining in particular the performance of Diamond-Like-Carbon coatings on a silicon substrate. Copyright © 2005 by ASME.

National report of the frame survey 2006 in the Ugandan part of Lake Victoria

Fisheries Frame surveys have been carried out on Lake Victoria biannually since 2000 to determine· the number of fishers, fish landing sites, facilities at the landing sites. Information on the composition fishing crafts, their mode of propulsion, fishing gears and the fish species they target is also collected. This information is used to guide development and management of the lake's fisheries. The results of the four surveys carried out since 2000 show that the number of landing sites has decreased by 24% from 597 in 2000 to 481 in 2006, mainly as result of reorganisation of landing sites into Beach Management Units (BMUs). The fish landing sites continue to have inadequate facilities to service the fisheries industry e.g. in the 2006 survey only 11.2% of landing sites had fish shades; <0.6% had cold rooms; 3.5% had electricity; and only 35.5% had toilet facilities. Similarly, only 11.4% of landing sites had portable water; 2.5% had jetties, 3.7% had 'fish stores; and 36% were accessible by all weather roads. There is need to improve facilities servicing fisheries at landing sites, with major emphasis on sanitary facilities, especially toilets and portable water. The BMUs should be sensitised to prioritise the construction and utilisation of public toilet facilities at their respective landing sites. The ultimate aim should be to have public toilets at all fish landing sites. The trend of the various indicators of fishing effort has continued upwards: The total number of fishers increased by 43.5% from 37,721 in 2004 to 54,148 in 2006 and the number of fishing crafts increased (43.9%) from 16,775 in 2004 to 24,148 in 2006 over the same period. The total number of gillnets increased by 28.6% from 458,597 in 2004 to 589,777 in 2006 and the number of long line hooks increased by 136% from 968,848 to 2,285,609. The number of fishing crafts using outboard engines also increased from 3,173 in 2004 to 5,047 in 2006 suggesting that more fishers were going far in search of fish. There is still a large number of illegal gears especially beach seines, which increased by 58.8% from 954 in 2004 to 1420 in 2006. Efforts to remove these very destructive gears should be stepped up. There was also larger increase in number of illegal gillnets <5 inch mesh size. These increased by 63% from 56,246 in 2004 to 91,740 in 2006 compared with 23.8% increase of gillnets ~5 inch mesh size. There were also large increases in the numbers of gillnets of 5 and 5% inch mesh size, which increased by 48% and 130% from 2004 to 2006 implying a trend towards use of smaller gillnet mesh sizes. The number of traps which are used in shallow vegetated areas, flood plains and river mouths to target tilapiines and riverine species decreased drastically from 5,361 traps in 2004 to only 499 traps in 2006, a decrease of 974%, a phenomenon attributed to the receding water levels which have left the shallow vegetated areas dry. A total of 17,475 fishing crafts, 72% of all fishing crafts, in the Ugandan part of the lake are still using paddles and the. number of parachute crafts is also still very high, (Le. 5,064) comprising a high proportion (21 %) of the total number of fishing. There is need to promote the use of large fishing crafts with sails or a combination of sail and outboard motor. The Mukene fishery in the Ugandan waters of Lake Victoria has remained underdeveloped with only 9% of all fishing crafts operating in this fishery. Also less than 2% of fishing crafts with sails or motor operate in this fishery which implies that it is limited to near shore waters. Effort should be made to develop this fishery as it appears to have high potential, especially in deep offshore waters which are hardly fished.

Micro-vortex generator flow control for supersonic engine inlets

To investigate the flow control potential of micro-vortex generators for supersonic mixed-compression inlets, a basic model experiment has been designed which combines a normal shock wave with a subsonic diffuser. The diffuser is formed by a simple expansion corner, with a divergence angle of 6 degrees. The diffuser entry Mach numbers were M=1.3 and M=1.5 and a number of shock locations relative to the corner position were tested. Flow control was applied in the form of counter-rotating micro-vanes with heights of approximately 20% of boundary layer thickness. Furthermore, corner fences where employed to reduce sidewall effects. It was found that micro-vortex generators were able to significantly reduce the extent of flow separation under all conditions, but could not eliminate it altogether. Corner fences also demonstrated potential for improving the flow in rectangular cross section channels and the combination of corner fences with micro-vortex generators was found to give the greatest benefits. At M=1.3 the combination of corner fences and micro-vanes placed close to the diffuser entry could prevent separation for a wide range of conditions. At the higher diffuser entry Mach number the benefits of flow control were less significant although a reduction of separation size and an improved pressure recovery was observed. It is thought that micro-vortex generators can have significant flow control potential if they are placed close to the expected separation onset and when the adverse pressure gradient is not too far above the incipient separation level. The significant beneficial effects of corner fences warrant a more comprehensive further investigation. It is thought that the control methods suggested here are capable of reducing the bleed requirement on an inlet, which could provide significant performance advantages.

Molecular evolution of microcephalin, a gene determining human brain size

Microcephalin gene is one of the major players in regulating human brain development. It was reported that truncated mutations in this gene can cause primary microcephaly in humans with a brain size comparable with that of early hominids. We studied the m

Scale characteristics in relation to size in cichlid fish, Oreochromis mossambicus

Teleostean scale characteristics like length, width, number of circuli, primary radii, secondary radii and ctenii were studied to delineate its relationship with total length in a euryhaline fish, Oreochromis mossambicus (perciformes: cichlidae). Statistical analysis proved a positive correlation between the scale characteristics and fish size. The characteristics of midlateral scales indicated that these scales appeared first during squamation chronology. Further observations also indicated that differences in salinity could modify the morphometries of scales.

Size related feeding patterns and electivity indices of silver barb (Barbodes gonionotus Bleeker) from a pond, Bangladesh

The feeding patterns with respect to quality and quantity of food of silver barb, Barbodes gonionotus varied with their size and development. The results indicated that the fish in the size group I (7-25 mm TL) were fairly omnivore with particular liking for rotifera, green and blue-green algae while the size group II (25.1-44 mm TL) and III (44.1-55 mm TL) were omnivore with higher tendency of feeding on debris, aquatic plants, green algae, blue-green algae and rotifera. However, the fish of the size group IV (55.1-80 mm TL) were found to be herbivore with feeding preference for aquatic plants, green and blue-green algae. In all the size groups, debris was the most dominant food item. Feeding preference of the fish showed clear ontogenetic shift. The electivity indices revealed that the fish were selective feeder.

Size frequency distribution and carapace length-total length relationship of Acetes chinensis in the Kutubdia channel of Bangladesh coast

The seasonal mean size distribution of A. chinensis were estimated as 29.229mm ±4.77, 25.125mm ±2.55, 25.165mm ±2.29 and 32.44mm ±3.63 for annual, monsoon, postmonsoon and pre-monsoon period, respectively. Seasonal mean carapace length distribution were estimated as 9.37mm ±1.457, 8.063mm ±0.63,8.258mm ±0.59 and 10.37mm ±l.ll3 for annual, monsoon, post-monsoon and the pre-monsoon season. The carapace length and total length relationships was found to be TL= - 1.39±3.23 CL. Linear relation was found in arithmetic and as well as logarithmic scale.

An observation of performances in carp-prawn polyculture in respect of fingerlings size and water area

Performances of fingerling size and water area was studied. Seven species of fish included 25% of Hypophthalmichthys molitrix, 15% of Gada catla, 20% of Labeo rohita, 10% of Cirrhinus mrigala, 10% of Ctenophyringodon idella and 20% of Macrobrachium rosenbergii were stocked at the rate of 8,000 individual/ha along Barbodes gonionoms at 6.0g weight size with a stocking density of 2,000 indl./ ha. Survival of all species was in the range of 39.9 to 96.3% except M. rosenbergii The highest survival was obtained from L. rohita (96.3%) followed by C mrigala (96.0 %)., B. gonionotus (92.3%), C idella (90.6%), H. molitrix (84.0%), C cada (81.7%) respectively. While the survival of M. rosenbergiiwas 13.1%. The highest production of 4912 kg/ha/yr was obtained from the bigger ponds (0.4 ha) stocked with 20-32g size of fingerlings, while lowest production (3123 kg/ha/yr) from small pond (0.1 ha) stocked with 3-10 g fingerlings. Economic analysis shows the highest net profit in bigger ponds stocked with bigger fish seed.

Food of two size-groups of the catfish Mystus giulio (Hamilton-Buchanan) in Vemblai canal, Vypeen Island

The stomach contents of two length-groups of the catfish Mystus gulio collected from Vemblai Canal in Vypeen Island (Kochi) were examined by frequency of occurrence and points methods. Analyses using standard indices proved difference in diet composition between the two size-groups.