Using simulation to assess the introduction of technology in a continuous operations process

Purpose – To investigate the role of simulation in the introduction of technology in a continuous operations process. Design/methodology/approach – A case-based research method was chosen with the aim to provide an exemplar of practice and test the proposition that the use of simulation can improve the implementation and running of conveyor systems in continuous process facilities. Findings – The research determines the optimum rate of re-introduction of inventory to a conveyor system generated during a breakdown event. Research limitations/implications – More case studies are required demonstrating the operational and strategic benefits that can be gained by using simulation to assess technology in organisations. Practical implications – A practical outcome of the study was the implementation of a policy for the manual re-introduction of inventory on a conveyor line after a breakdown event had occurred. Originality/value – The paper presents a novel example of the use of simulation to estimate the re-introduction rate of inventory after a breakdown event on a conveyor line. The paper highlights how by addressing this operational issue, ahead of implementation, the likelihood of the success of the strategic decision to acquire the technology can be improved.

Flow patterns, performance and scale-up of distillation trays

This work is concerned with the nature of liquid flow across industrial sieve trays operating in the spray, mixed, and the emulsified flow regimes. In order to overcome the practical difficulties of removing many samples from a commercial tray, the mass transfer process was investigated in an air water simulator column by heat transfer analogy. The temperature of the warm water was measured by many thermocouples as the water flowed across the single pass 1.2 m diameter sieve tray. The thermocouples were linked to a mini computer for the storage of the data. The temperature data were then transferred to a main frame computer to generate temperature profiles - analogous to concentration profiles. A comprehensive study of the existing tray efficiency models was carried out using computerised numerical solutions. The calculated results were compared with experimental results published by the Fractionation Research Incorporation (FRl) and the existing models did not show any agreement with the experimental results. Only the Porter and Lockett model showed a reasonable agreement with the experimental results for cenain tray efficiency values. A rectangular active section tray was constructed and tested to establish the channelling effect and the result of its effect on circular tray designs. The developed flow patterns showed predominantly flat profiles and some indication of significant liquid flow through the central region of the tray. This comfirms that the rectangular tray configuration might not be a satisfactory solution for liquid maldistribution on sieve trays. For a typical industrial tray the flow of liquid as it crosses the tray from the inlet to the outlet weir could be affected by the mixing of liquid by the eddy, momentum and the weir shape in the axial or the transverse direction or both. Conventional U-shape profiles were developed when the operating conditions were such that the froth dispersion was in the mixed regime, with good liquid temperature distribution while in the spray regime. For the 12.5 mm hole diameter tray the constant temperature profiles were found to be in the axial direction while in the spray regime and in the transverse direction for the 4.5 mm hole tray. It was observed that the extent of the liquid stagnant zones at the sides of the tray depended on the tray hole diameter and was larger for the 4.5 mm hole tray. The liquid hold-up results show a high liquid hold-up at the areas of the tray with low liquid temperatures, this supports the doubts about the assumptions of constant point efficiency across an operating tray. Liquid flow over the outlet weir showed more liquid flow at the centre of the tray at high liquid loading with low liquid flow at both ends of the weir. The calculated results of the point and tray efficiency model showed a general increase in the calculated point and tray efficiencies with an increase in the weir loading, as the flow regime changed from the spray to the mixed regime the point and the tray efficiencies increased from approximately 30 to 80%.Through the mixed flow regime the efficiencies were found to remain fairly constant, and as the operating conditions were changed to maintain an emulsified flow regime there was a decrease in the resulting efficiencies. The results of the estimated coefficient of mixing for the small and large hole diameter trays show that the extent of liquid mixing on an operating tray generally increased with increasing capacity factor, but decreased with increasing weir loads. This demonstrates that above certain weir loads, the effect of eddy diffusion mechanism on the process of liquid mixing on an operating tray to be negligible.

An Investigation into the adoption and implementation of computer aided production management systems:using the Rogers model of adoption and implementation and a social constuctionist account of technology

The research investigates the processes of adoption and implementation, by organisations, of computer aided production management systems (CAPM). It is organised around two different theoretical perspectives. The first part is informed by the Rogers model of the diffusion, adoption and implementation of innovations, and the second part by a social constructionist approach to technology. Rogers' work is critically evaluated and a model of adoption and implementation is distilled from it and applied to a set of empirical case studies. In the light of the case study data, strengths and weaknesses of the model are identified. It is argued that the model is too rational and linear to provide an adequate explanation of adoption processes. It is useful for understanding processes of implementation but requires further development. The model is not able to adequately encompass complex computer based technologies. However, the idea of 'reinvention' is identified as Roger's key concept but it needs to be conceptually extended. Both Roger's model and definition of CAPM found in the literature from production engineering tend to treat CAPM in objectivist terms. The problems with this view are addressed through a review of the literature on the sociology of technology, and it is argued that a social constructionist approach offers a more useful framework for understanding CAPM, its nature, adoption, implementation, and use. CAPM it is argued, must be understood on terms of the ways in which it is constituted in discourse, as part of a 'struggle for meaning' on the part of academics, professional engineers, suppliers, and users.

A techno-economic assessment of the use of fast pyrolysis bio-oil from UK energy crops in the production of electricity and combined heat and power

This thesis investigates the cost of electricity generation using bio-oil produced by the fast pyrolysis of UK energy crops. The study covers cost from the farm to the generator’s terminals. The use of short rotation coppice willow and miscanthus as feedstocks was investigated. All costs and performance data have been taken from published papers, reports or web sites. Generation technologies are compared at scales where they have proved economic burning other fuels, rather than at a given size. A pyrolysis yield model was developed for a bubbling fluidised bed fast pyrolysis reactor from published data to predict bio-oil yields and pyrolysis plant energy demands. Generation using diesel engines, gas turbines in open and combined cycle (CCGT) operation and steam cycle plants was considered. The use of bio-oil storage to allow the pyrolysis and generation plants to operate independently of each other was investigated. The option of using diesel generators and open cycle gas turbines for combined heat and power was examined. The possible cost reductions that could be expected through learning if the technology is widely implemented were considered. It was found that none of the systems analysed would be viable without subsidy, but with the current Renewable Obligation Scheme CCGT plants in the 200 to 350 MWe range, super-critical coal fired boilers co-fired with bio-oil, and groups of diesel engine based CHP schemes supplied by a central pyrolysis plant would be viable. It was found that the cost would reduce with implementation and the planting of more energy crops but some subsidy would still be needed to make the plants viable.

Creating a culture for critical and situated technology use through effective learning design

The purpose of this concise paper is to propose, with evidence gathered through a systematic evaluation of an academic development programme in the UK, that training in the use of new and emerging learning technologies should be holistically embedded in every learning and training opportunity in learning, teaching and assessment in higher education, and not only as stand-alone modules or one-off opportunities. The future of learning in higher education cannot afford to allow Universities to disregard that digital literacy is an expected professional skill for their entire staff.

Entrepreneurial profile of the UK in the light of the Global Entrepreneurship and Development Index

In this research summary, we provide a novel look into the entrepreneurial profile of the UK in an international context. We use a new method – the Global Entrepreneurship and Development Index GEDI – to identify the entrepreneurial strengths and weaknesses of the UK economy, as well as to identify potential bottlenecks that hold back the performance of the UK relative to other advanced economies. We perform a Penalty for Bottleneck analysis to identify the bottlenecks in the UK's entrepreneurial profile. We also explore optimal resource allocation for UK's policy for National Systems of Entrepreneurship.

Personality profile of male adolescents with Tourette syndrome:a controlled study

Tourette syndrome is a neurodevelopmental disorder characterized by multiple tics and commonly associated with behavioral problems, especially obsessive-compulsive disorder and attention-deficit hyperactivity disorder (ADHD). The presence of specific personality traits has been documented in adult clinical populations with Tourette syndrome but has been underresearched in younger patients. We assessed the personality profiles of 17 male adolescents with Tourette syndrome and 51 age- and gender-matched healthy controls using the Minnesota Multiphasic Personality Inventory-Adolescent version, along with a standardized psychometric battery. All participants scored within the normal range across all Minnesota Multiphasic Personality Inventory-Adolescent version scales. Patients with Tourette syndrome scored significantly higher than healthy controls on the Obsessiveness Content Scale only (P = .046). Our findings indicate that younger male patients with Tourette syndrome do not report abnormal personality traits and have similar personality profiles to healthy peers, with the exception of obsessionality traits, which are likely to be related to the presence of comorbid obsessive compulsive symptoms rather than tics.

The political discourse and material practice of technology enhanced learning

Technology discloses man’s mode of dealing with Nature, the process of production by which he sustains his life, and thereby also lays bare the mode of formation of his social relations, and of the mental conceptions that flow from them (Marx, 1990: 372) My thesis is a Sociological analysis of UK policy discourse for educational technology during the last 15 years. My framework is a dialogue between the Marxist-based critical social theory of Lieras and a corpus-based Critical Discourse Analysis (CDA) of UK policy for Technology Enhanced Learning (TEL) in higher education. Embedded in TEL is a presupposition: a deterministic assumption that technology has enhanced learning. This conceals a necessary debate that reminds us it is humans that design learning, not technology. By omitting people, TEL provides a vehicle for strong hierarchical or neoliberal, agendas to make simplified claims politically, in the name of technology. My research has two main aims: firstly, I share a replicable, mixed methodological approach for linguistic analysis of the political discourse of TEL. Quantitatively, I examine patterns in my corpus to question forms of ‘use’ around technology that structure a rigid basic argument which ‘enframes’ educational technology (Heidegger, 1977: 38). In a qualitative analysis of findings, I ask to what extent policy discourse evaluates technology in one way, to support a Knowledge Based Economy (KBE) in a political economy of neoliberalism (Jessop 2004, Fairclough 2006). If technology is commodified as an external enhancement, it is expected to provide an ‘exchange value’ for learners (Marx, 1867). I therefore examine more closely what is prioritised and devalued in these texts. Secondly, I disclose a form of austerity in the discourse where technology, as an abstract force, undertakes tasks usually ascribed to humans (Lieras, 1996, Brey, 2003:2). This risks desubjectivisation, loss of power and limits people’s relationships with technology and with each other. A view of technology in political discourse as complete without people closes possibilities for broader dialectical (Fairclough, 2001, 2007) and ‘convivial’ (Illich, 1973) understandings of the intimate, material practice of engaging with technology in education. In opening the ‘black box’ of TEL via CDA I reveal talking points that are otherwise concealed. This allows me as to be reflexive and self-critical through praxis, to confront my own assumptions about what the discourse conceals and what forms of resistance might be required. In so doing, I contribute to ongoing debates about networked learning, providing a context to explore educational technology as a technology, language and learning nexus.

Resisting the final word:challenging stale media and policy representations of students’ performative technological encounters in university education

This article explores powerful, constraining representations of encounters between digital technologies and the bodies of students and teachers, using corpus-based Critical Discourse Analysis (CDA). It discusses examples from a corpus of UK Higher Education (HE) policy documents, and considers how confronting such documents may strengthen arguments from educators against narrow representations of an automatically enhanced learning. Examples reveal that a promise of enhanced ‘student experience’ through information and communication technologies internalizes the ideological constructs of technology and policy makers, to reinforce a primary logic of exchange value. The identified dominant discursive patterns are closely linked to the Californian ideology. By exposing these texts, they provide a form of ‘linguistic resistance’ for educators to disrupt powerful processes that serve the interests of a neoliberal social imaginary. To mine this current crisis of education, the authors introduce productive links between a Networked Learning approach and a posthumanist perspective. The Networked Learning approach emphasises conscious choices between political alternatives, which in turn could help us reconsider ways we write about digital technologies in policy. Then, based on the works of Haraway, Hayles, and Wark, a posthumanist perspective places human digital learning encounters at the juncture of non-humans and politics. Connections between the Networked Learning approach and the posthumanist perspective are necessary in order to replace a discourse of (mis)representations with a more performative view towards the digital human body, which then becomes situated at the centre of teaching and learning. In practice, however, establishing these connections is much more complex than resorting to the typically straightforward common sense discourse encountered in the Critical Discourse Analysis, and this may yet limit practical applications of this research in policy making.

The relative advantage of marketing over technological capabilities in influencing new product performance:the moderating role of country institutions

Marketing and technological capabilities are major drivers of new product performance. Prior research has suggested that marketing capabilities outperform technological capabilities. This study shows that the relative advantage of marketing over technological capabilities for new product performance depends on the institutional context in a country. Meta-analytic data of 341 effect sizes of the relationship between capabilities and new product performance taken from 50 articles with 57 independent samples and collected in 17 different countries reveal new contingencies to the capabilities framework. Although in general, marketing capabilities have a stronger influence than technological capabilities on new product performance, this effect is moderated by institutional context factors. The relative advantage decreases and even reverses with increasing growth rates; it further decreases with increasingly stronger rules of law in a country; and it increases in societies that put emphasis on self-expression values over survival values. These findings contribute to research on the utility of different capabilities, inform the institution-based view of firms in international marketing, and provide implications for international marketing managers.