Age-related changes in mouse bone permeability.

The determination of lacunar-canalicular permeability is essential for understanding local fluid flow in bone, which may indicate how bone senses changes in the mechanical environment to regulate mechano-adaptation. The estimates of lacunar-canalicular permeability found in the literature vary by up to eight orders of magnitude, and age-related permeability changes have not been measured in non-osteonal mouse bone. The objective of this study is to use a poroelastic approach based on nanoindentation data to characterize lacunar-canalicular permeability in murine bone as a function of age. Nine wild type C57BL/6 mice of different ages (2, 7 and 12 months) were used. Three tibiae from each age group were embedded in epoxy resin, cut in half and indented in the longitudinal direction in the mid-cortex using two spherical fluid indenter tips (R=238 μm and 500 μm). Results suggest that the lacunar-canalicular intrinsic permeability of mouse bone decreases from 2 to 7 months, with no significant changes from 7 to 12 months. The large indenter tip imposed larger contact sizes and sampled larger ranges of permeabilities, particularly for the old bone. This age-related difference in the distribution was not seen for indents with the smaller radius tip. We conclude that the small tip effectively measured lacunar-canalicular permeability, while larger tip indents were influenced by vascular permeability. Exploring the age-related changes in permeability of bone measured by nanoindentation will lead to a better understanding of the role of fluid flow in mechano-transduction. This understanding may help indicate alterations in bone adaptation and remodeling.

Modeling the carbon nanofiber addressed liquid crystal microlens array from experimentally observed optical phenomena

This paper presents a novel method of using experimentally observed optical phenomena to reverse-engineer a model of the carbon nanofiber-addressed liquid crystal microlens array (C-MLA) using Zemax. It presents the first images of the optical profile for the C-MLA along the optic axis. The first working optical models of the C-MLA have been developed by matching the simulation results to the experimental results. This approach bypasses the need to know the exact carbon nanofiber-liquid crystal interaction and can be easily adapted to other systems where the nature of an optical device is unknown. Results show that the C-MLA behaves like a simple lensing system at 0.060-0.276 V/μm. In this lensing mode the C-MLA is successfully modeled as a reflective convex lens array intersecting with a flat reflective plane. The C-MLA at these field strengths exhibits characteristics of mostly spherical or low order aspheric arrays, with some aspects of high power aspherics. It also exhibits properties associated with varying lens apertures and strengths, which concur with previously theorized models based on E-field patterns. This work uniquely provides evidence demonstrating an apparent "rippling" of the liquid crystal texture at low field strengths, which were successfully reproduced using rippled Gaussian-like lens profiles. © 2014 Published by Elsevier B.V.

Measuring the compressive viscoelastic mechanical properties of human cervical tissue using indentation.

The human cervix is an important mechanical barrier in pregnancy which must withstand the compressive and tensile forces generated from the growing fetus. Premature cervical shortening resulting from premature cervical remodeling and alterations of cervical material properties are known to increase a woman׳s risk of preterm birth (PTB). To understand the mechanical role of the cervix during pregnancy and to potentially develop indentation techniques for in vivo diagnostics to identify women who are at risk for premature cervical remodeling and thus preterm birth, we developed a spherical indentation technique to measure the time-dependent material properties of human cervical tissue taken from patients undergoing hysterectomy. In this study we present an inverse finite element analysis (IFEA) that optimizes material parameters of a viscoelastic material model to fit the stress-relaxation response of excised tissue slices to spherical indentation. Here we detail our IFEA methodology, report compressive viscoelastic material parameters for cervical tissue slices from nonpregnant (NP) and pregnant (PG) hysterectomy patients, and report slice-by-slice data for whole cervical tissue specimens. The material parameters reported here for human cervical tissue can be used to model the compressive time-dependent behavior of the tissue within a small strain regime of 25%.

Colony development and physiological characterization of the edible blue-green alga, Nostoc sphaeroides (Nostocaceae, Cyanophyta)

The edible blue-green alga, Nostoc sphaeroides Kutzing, is able to form microcolonies and spherical macrocolonies. It has been used as a potent herbal medicine and dietary supplement for centuries because of its nutraceutical and pharmacological benefits. However, limited information is available on the development of the spherical macrocolonies and the environmental factors that affect their structure. This report described the morphogenesis of N. sphaeroides from single trichomes to macrocolonies. During the process, most structural features of macrocolonies of various sizes were dense maculas, rings, the compact core and the formation of liquid core; and the. laments within the macrocolonies showed different lengths and arrays depending on the sizes of macrocolonies. Meanwhile temperature and light intensity also strongly affected the internal structure of macrocolonies. As microcolonies further increased in size to form 30 mm macrocolonies, the colonies differentiated into distinct outer, middle and inner layers. The. laments of the outer layer showed higher maximum photosynthetic rates, higher light saturation point, and higher photosynthetic effciency than those of the inner layer; whereas the. laments of the inner layer had a higher content of chlorophyll a and phycobiliproteins than those of the outer layer. The results obtained in this study were important for the mass cultivation of N. sphaeroides as a nutraceutical product. (c) 2008 National Natural Science Foundation of China and Chinese Academy of Sciences. Published by Elsevier Limited and Science in China Press. All rights reserved.

Mechanisms of projectile penetration in Dyneema® encapsulated aluminum structures

Polymer composites comprising ultra-high molecular weight polyethylene (UHWMPE) fibers in a compliant matrix are now widely used in ballistic applications with varying levels of success. This is primarily due to a poor understanding of the mechanics of penetration of these composites in ballistic protection systems. In this study, we report experimental observations of the penetration mechanisms in four model systems impacted by a 12.7 mm diameter spherical steel projectile. The four model targets designed to highlight different penetration mechanisms in Dyneema® UHWMPE composites were: (i) a bare aluminum plate; (ii) the same plate fully encased in a 5.9 mm thick casing of Dyneema®; (iii) the fully encased plate with a portion of the Dyneema® removed from the front face so that the projectile impacts directly the Al plate; and (iv) the fully encased plate with a portion of the Dyneema® removed from the rear face so that the projectile can exit the Al plate without again interacting with the Dyneema®. A combination of synchronized high speed photography with three cameras, together with post-test examination of the targets via X-ray tomography and optical microscopy was used to elucidate the deformation and perforation mechanisms. The measurements show that the ballistic resistance of these targets increases in the order: bare Al plate, rear face cutout target, fully encased target and front face cutout target. These findings are explained based on the following key findings: (a) the ballistic performance of Dyneema® plates supported on a foundation is inferior to Dyneema® plates supported along their edges; (b) the apparent ballistic resistance of Dyneema® plates increases if the plates are given an initial velocity prior to the impact by the projectile, thereby reducing the relative velocity between the Dyneema® plate and projectile; and (c) when the projectile is fragmented prior to impact, the spatially and temporally distributed loading enhances the ballistic resistance of the Dyneema®. The simple model targets designed here have elucidated mechanisms by which Dyneema® functions in multi-material structures. © 2014 Elsevier Ltd.

Age-related changes in mouse bone permeability

The determination of lacunar-canalicular permeability is essential for understanding local fluid flow in bone, which may indicate how bone senses changes in the mechanical environment to regulate mechano-adaptation. The estimates of lacunar-canalicular permeability found in the literature vary by up to eight orders of magnitude, and age-related permeability changes have not been measured in non-osteonal mouse bone. The objective of this study is to use a poroelastic approach based on nanoindentation data to characterize lacunar-canalicular permeability in murine bone as a function of age. Nine wild type C57BL/6 mice of different ages (2, 7 and 12 months) were used. Three tibiae from each age group were embedded in epoxy resin, cut in half and indented in the longitudinal direction in the mid-cortex using two spherical fluid indenter tips (R=238 μm and 500 μm). Results suggest that the lacunar-canalicular intrinsic permeability of mouse bone decreases from 2 to 7 months, with no significant changes from 7 to 12 months. The large indenter tip imposed larger contact sizes and sampled larger ranges of permeabilities, particularly for the old bone. This age-related difference in the distribution was not seen for indents with the smaller radius tip. We conclude that the small tip effectively measured lacunar-canalicular permeability, while larger tip indents were influenced by vascular permeability. Exploring the age-related changes in permeability of bone measured by nanoindentation will lead to a better understanding of the role of fluid flow in mechano-transduction. This understanding may help indicate alterations in bone adaptation and remodeling. © 2013 Elsevier Ltd.

Viscoelastic analysis of single-component and composite PEG and alginate hydrogels

Hydrogels, three-dimensional hydrophilic polymer networks, are appealing candidate materials for studying the cellular microenvironment as their substantial water content helps to better mimic soft tissue. However, hydrogels can lack mechanical stiffness, strength, and toughness. Composite hydrogel systems have been shown to improve upon mechanical properties compared to their singlecomponent counterparts. Poly (ethylene glycol) dimethacrylate (PEGDMA) and alginate are polymers that have been used to form hydrogels for biological applications. Singlecomponent and composite PEGDMA and alginate systems were fabricated with a range of total polymer concentrations. Bulk gels were mechanically characterized using spherical indentation testing and a viscoelastic analysis framework. An increase in shear modulus with increasing polymer concentration was demonstrated for all systems. Alginate hydrogels were shown to have a smaller viscoelastic ratio than the PEGDMA gels, indicating more extensive relaxation over time. Composite alginate and PEGDMA hydrogels exhibited a combination of the mechanical properties of the constituents, as well as a qualitative increase in toughness. Additionally, multiple hydrogel systems were produced that had similar shear moduli, but different viscoelastic behaviors. Accurate measurement of the mechanical properties of hydrogels is necessary in order to determine what parameters are key in modeling the cellular microenvironment. © 2014 The Chinese Society of Theoretical and Applied Mechanics; Institute of Mechanics, Chinese Academy of Sciences and Springer-Verlag Berlin Heidelberg.

Initiation of immersed granular avalanches.

By means of coupled molecular dynamics-computational fluid dynamics simulations, we analyze the initiation of avalanches in a granular bed of spherical particles immersed in a viscous fluid and inclined above its angle of repose. In quantitative agreement with experiments, we find that the bed is unstable for a packing fraction below 0.59 but is stabilized above this packing fraction by negative excess pore pressure induced by the effect of dilatancy. From detailed numerical data, we explore the time evolution of shear strain, packing fraction, excess pore pressures, and granular microstructure in this creeplike pressure redistribution regime, and we show that they scale excellently with a characteristic time extracted from a model based on the balance of granular stresses in the presence of a negative excess pressure and its interplay with dilatancy. The cumulative shear strain at failure is found to be ≃ 0.2, in close agreement with the experiments, irrespective of the initial packing fraction and inclination angle. Remarkably, the avalanche is triggered when dilatancy vanishes instantly as a result of fluctuations while the average dilatancy is still positive (expanding bed) with a packing fraction that declines with the initial packing fraction. Another nontrivial feature of this creeplike regime is that, in contrast to dry granular materials, the internal friction angle of the bed at failure is independent of dilatancy but depends on the inclination angle, leading therefore to a nonlinear dependence of the excess pore pressure on the inclination angle. We show that this behavior may be described in terms of the contact network anisotropy, which increases with a nearly constant connectivity and levels off at a value (critical state) that increases with the inclination angle. These features suggest that the behavior of immersed granular materials is controlled not only directly by hydrodynamic forces acting on the particles but also by the influence of the fluid on the granular microstructure.

Redescription of Difflugia tuberspinifera Hu, Shen, Gu et Gong, 1997 (Protozoa : Rhizopoda : Arcellinida : Difflugiidae) from China

The freshwater testate amoeba Difflugia tuberspinifera Hu et al. 1997 collected from pond and lake in China, is investigated by light and scanning electron microscopy. This little known taxon is redescribed and its morphology, biometry and ecology are supplied. After carefully comparison with other six similar species including Difflugia bartosi Stepanek, D. corona Wallich, D. corona cashi Deflandre, D. corona tuberculata Vucetich, D. muriformis Gauthier-Lievre et Thomas and Netzelia tuberculata (Wallich) Netzal we believe that the sub-spherical to spherical shell, the mulberry-shaped appearance, the 7-10 apertural tooth-like structures, the short collar and the conical spines numbering from 4 to 8 at the upper equatorial region in D. tuberspinifera set it apart from other species. Besides, statistical analysis indicates that D. tuberspinifera is a size-monomorphic species characterized by a main-size class and a small size range and the shell height is significant correlated with other morphometric characters at p < 0.05 excepting the number of aperture tooth-like structures and the number of spines. Moreover, D. tuberspinifera inhabits not only lotic but also lentic environment.

Rickettsia-like organism infection in a freshwater cultured fish Ophiocephalus argus C. in China

From 2001 to 2002, a new and emergent infectious disease of Ophiocephalus argus occurred in a fishery in Hubei Province, China, with an incidence of 60% similar to 70% and a mortality as high as 100 %. The diseased fish showed an enlarged abdomen, the millet-like nodules in internal organs, and the swollen kidney which was composed of 5 similar to 10 sarcoma-like bodies in cream or gray-white colour or ulcerated into beandregs-like substance. Light microscopic observation revealed the basophilic or acidphilic inclusions in cytoplasm of the cells and the granulomas, a diffusive chronic inflammation in internal organs. Further analysis under an electron microscope indicated that the intracytoplasmic inclusions were rickettsia-like organisms (RLOs) that are either spherical or coccoid, with variable size, ranging from 0.5 similar to 1.5 mum in diameter, and enclosed within membrane-bound cytoplasmic vacuoles. RLO had a central nucleoid region with some fine filamentous structures and an electron-dense granule. Its cytoplasm contained abundant ribosomal bodies. Occasionally, RLO appeared to be divided by binary fission. RLOs were also observed in the homogenized tissue of infected fish. The results suggested that the death of cultured O. argus was caused by RLO infection.

Description of two new myxosporean species parasitic in freshwater fishes from the Yangtze River in China

Two new species of myxosporeans (Myxosporea: Myxidiidae), Myxidium tuanfengensis sp. n. and Zschokkella saurogobionis sp. n., Parasitic in freshwater fishes collected from the Yangtze River of China are described in this paper. M. tuanfengensis was found in the liver parenchyma and intestine lumen of Leptobotia taeniops Sauvage, 1878, while Z. saurogobionis was found in the gall bladder of Saurogobio dumerili Bleeker, 1871. The diagnostic characters of M. tuanfengensis are: round or elliptical polysporous plasmodia averaging 118 mum in size; spore oval in frontal view with smooth surface and nearly spindle-shape in sutural view with slightly sinuous sutural ridge, averaging 19.5 x 9.75 x 8.9 mum in size; two large spherical polar capsules 6.8 mum in diameter, with polar filament wound in 4 to 5 coils. The diagnostic characters of Z. saurogobionis are: spore elliptical in both frontal and sutural view measuring 18.3 x 9.8 x 10.8 mum in size; fine sutural ridge in S-form, spore shell marked with 10 to 12 distinct lines paralleled with the sutural line; two spherical polar capsules, 6.7 mum in diameter, with polar filament in 5 coils.

Four new terrestrial species of Marionina (Clitellata, Enchytraeidae) from China and re-examination of M. hoVbaueri Moller

Enchytraeid surveys were made in China, mainly along the Changjiang (Yangtze) River Basin, during the period 1991-1999. Among the findings, four terrestrial species of Marionina are new to science and well illustrate the taxonomic complexity of the genus as currently defined. Marionina sinica sp. n. is characterized by a specific chaetal distribution, the marionine pattern of the dorsal blood vessel, and elongate, fusiform, spermathecal ectal ducts. Marionina sacculata sp. n. is distinguished by the possession of a pair of pouch-like oesophageal appendages in IV, the lack of lateral chaetae in VII-XI, a marionine pattern of the dorsal blood vessel, and short spermathecal ectal ducts gradually expanding into spherical ampullae. Both M. sinica and M. sacculata have minute bodies (2-3 mm long in vivo) and lack spermathecal accessory glands. The former species shows its closest aYnities with the European M. brendae Rota, 1995, whereas the latter is closest to the German M. hoVbaueri Moller, 1971, for which an amended diagnosis is provided. Marionina seminuda sp. n. has only ventral chaetal bundles, distributed from III onwards and bisetose. It is similar to the Holarctic M. subterranea (Knollner, 1935) in lacking entirely the lateral chaetae and in having the brain incised posteriorly, the dorsal vessel bifurcating behind the pharynx, and coelomocytes containing opaque granules, but diVers from it in having the longest chaetae in preclitellar segments and gland cells distributed all over the spermathecal ectal ducts. Marionina righiana sp. n. is diagnosed by the location of the head pore on the prostomium, the absence of lateral chaetae from VIII ( VII or IX) onwards, the possession of free spermathecae extending backwards through one to four segments, the brain deeply incised posteriorly, the lumbricilline pattern of the dorsal blood vessel, and the opacity of coelomocytes in vivo. Prior to this study, members of the genus so atypical as M. righiana with respect to the position of the head pore and the structure of the spermathecae were known only from South American soils. Until the taxonomy of Marionina has been more thoroughly assessed and revised, the assignment of the four species to this large assemblage should be regarded as tentative.

Studies on morphogenesis and cellular interactions of Rana grylio virus in an infected fish cell line

A pathogenic virus (RGV), isolated from diseased pig frog Rana grylio with lethal syndrome, was investigated with regard to morphogenesis and cellular interactions in EPC cells, a cell Line from fish. Different stages of virus amplification, maturation and assembly were observed at nucleus, cytoplasm and cellular membranes. The matured virus particles, were not only distributed diffusely in nucleus, cytoplasm and cellular surface, but also aggregated as pseudocrystalline arrays in the cytoplasm. Virions were released by budding from the plasma membranes, or following cell lysis. Various types of cell damage, such as small vacuoles, spherical inclusions, and swollen and empty mitochondria, were also found. Some typical characteristics of RGV, such as the symmetrical shape of the virions, replication process involving both nuclear and cytoplasmic phases, budding release from cellular membrane and intracellular membrane, viromatrix and paracrystalline aggregation in cytoplasm, and its acute pathogenic effects, were observed to be similar to that of other iridoviruses. Therefore, the RGV appears to be a member of the Iridoviridae based on these studies. (C) 1999 Elsevier Science B.V. All rights reserved.

Three different viruses observed from the tissues of diseased mandarin fish Siniperca chuatsi

Three different kinds of viruses, the spherical virus SCSV with a diameter of about 280 nm, the rhabdovirus SCRV with a size about 250 x 120 nm, and the baculovirus SCBV with a size about 200 x 100 nm, were observed from the tissues of diseased mandarin fish Siniperca chuatsi with outbreak of infection and acute lethality. This phenomenon implicated that the reason why the epizootic disease of mandarin fish could not be quenched by only one kind of virus vaccine can be explained by the fact that the fish may be infected by different kinds of viruses. Therefore, more attention should be paid to the complexity of virus pathogens in the prevention strategy for mandarin fish diseases.

Electronic structures of wurtzite ZnO, BeO, MgO and p-type doping in Zn1-xYxO (Y = Mg, Be)

Using the density function theory within the generalized gradient approximation, the band structures of wurtzite ZnO, BeO and MgO have been calculated. The effective-mass parameters are fitted using the calculated eigenvalues. The Dresselhaus spin-orbit effect appears in the k[1 00] direction, and is zero in the high symmetry direction k[00 1]. The orderings of valence band split by the crystal-field and spin-orbit coupling in wurtzite ZnO, BeO and MgO are identified by analyzing the wave function characters calculated by projecting the wave functions onto p-state in the spherical harmonics. For wurtzite ZnO, the ordering of valence band is Still Gamma(7) > Gamma(9) > Gamma(7) due to the negative spin-orbit coupling splitting energy and the positive crystal-field splitting energy. Thus, the Thomas' conclusion is confirmed. For wurtzite BeO and MgO, although their orderings of valence bands are Gamma(7) > Gamma(9) > Gamma(7) too, the origins of their orderings are different from that of wurtzite ZnO. Zn1-x,YxO (Y = Mg, Be) doped with N and P atoms have been studied using first-principles method. The calculated results show that N atom doped in Zn1-x BexO has more shallow acceptor energy level with increasing the concentration of Be atom. (C) 2008 Elsevier B.V. All rights reserved.