998 resultados para SOLID DOSAGE FORMS
Resumo:
This paper analyses the factors that determine solid waste service costs. The empirical analysis is based on information derived from a survey conducted in a sample of Galician municipalities. The results reveal economies of scale in municipalities of fewer than 50,000 inhabitants, such that cooperation between these municipalities could lead to cost savings. It also appears that private delivery is not cheaper than public delivery. Finally, designating a larger proportion of the total waste volume to recycling does not imply greater costs.
Resumo:
The technique of solid phase microextraction (SPME) was used for the extraction of halogenated contaminants of water samples from three cities of the State of São Paulo and the extracts were submitted to gas chromatographic analysis with electron capture detection (GC-ECD). In the samples of water collected at the city of São Paulo the detected level of trihalomethanes (THM) expressed as the sum of chloroform, dibromochloromethane and dichlorobromomethane, were higher than the permissible limit established by the Brazilian regulation. In the samples collected at the two other cities the level of any of the three THM remained below the sensitivity of the ECD.
Resumo:
Independent of the sample form (powder or film), XRD analysis of Ir0,3Ti(0,7-x)Ce xO2, (nominal) mixtures, for x=0, shows the formation of a solid solution phase between IrO2 and TiO2, as well as the rutile phases of IrO2 and TiO2. The presence of the anatase phase of TiO2 is also confirmed. The introduction of 30 mol% CeO2 in the mixture reveals the presence of the CeO2 and Ce2O3 phases, besides the already mentioned ones, in the powder. In the film form, however, an amorphous phase is identified. When all of the TiO2 is substituded by CeO2, for both sample forms, the only phases found are IrO2, CeO2 and Ce2O3. This result suggests cerium oxides are not capable of forming solid solutions with either IrO2 or (Ir,Ti)O2 acting solely as a dispersant matrix for these phases. These results are consistent with the much higher electrochemically active surface area when CeO2 is introduced in the binary Ti/Ir0,3Ti0,7O2 mixture. It was possible to establish a relationship between the electrochemical stability of the supported films and their crystalline structure. The unexpected presence of TiO2 and Ti2O3 in the Ti/Ir0,3Ce0,7O2 (film sample) is attributed to oxidation of the Ti support during the calcination step.
Resumo:
Complexation between acyclovir (ACV), an antiviral drug used for the treatment of herpes simplex virus infection, and beta-cyclodextrin (beta-CD) was studied in solution and in solid states. Complexation in solution was evaluated using solubility studies and nuclear magnetic resonance spectroscopy (¹H-NMR). In the solid state, X-ray diffraction, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and dissolution studies were used. Solubility studies suggested the existence of a 1:1 complex between ACV and beta-CD. ¹H-NMR spectroscopy studies showed that the complex formed occurs with a stoichiometry ratio of 1:1. Powder X-ray diffraction indicated that ACV exists in a semicrystalline state in the complexed form with beta-CD. DSC studies showed the existence of a complex of ACV with beta-CD. The TGA studies confirmed the DSC results of the complex. Solubility of ACV in solid complexes was studied by the dissolution method and it was found to be much more soluble than the uncomplexed drug.
Resumo:
Tarkastelen tutkimuksessani amerikkalaisen John Ashberyn (1927–) runoudessa lmenevää moniäänisyyttä. Runoutta pidetään yleensä yksiäänisenä puheena, kun taas omaanin ajatellaan erityisesti Mihail Bahtinin vaikutuksesta olevan luonnostaan oniääninen kirjallisuudenlaji. Ashberyn postmoderni runous haastaa tämän äsityksen. Ashbery tunnetaan vakiintuneita runouskäsityksiä vastaan kirjoittavana avantgarde-runoilijana. Pääasiallisina tutkimuskohteinani ovat Ashberyn pitkä runoelma nimeltä ”Litany” (1979) sekä lyhyiden runojen valikoima Your Name Here (2000). Vertailukohtana tarkastelen Ashberyn yhdessä James Schuylerin kanssa kirjoittamaa romaania A Nest of Ninnies (1969). Teoreettisena pohjana on käytetty Ashberyä käsittelevän muun tutkimuksen lisäksi muun muassa jälkistrukturalistisiin teorioihin liittyviä ajatuksia pronominien vaikutuksesta siihen miten lukija muodostaa käsityksen subjektiivisesta läsnäolosta runossa. Ashbery käyttää persoonapronomineja ilman selkeitä viittaussuhteita. Viittaussuhteiden hämärtymisen ja fragmentaarisuuden vuoksi Ashberyn runoja pidetään usein vaikeina, eikä niistä ole helppo löytää yhtä selkeää aihetta. Hajanaisuus on kuitenkin motivoitua, koska juuri se mahdollistaa moniäänisyyden ja avoimen tekstin, joka voi sisältää monia merkityksiä. Kun runossa ei ole yhden puhujan hallitsevaa ääntä, lukijan rooli merkitysten muodostajana nousee keskeiseksi. ”Litany” on selkeästi metatekstuaalinen runo, jossa fiktiivinen taso sekoittuu runouden, taiteen ja kritiikin mahdollisuuksien pohdintaan. Runo hahmottelee uudenlaista, moniäänistä teorian ja runouden rajoja purkavaa kommunikaation muotoa. Toisen persoonan pronominien voidaan runossa usein ajatella puhuttelevan lukijaa. Your Name Here -kokoelmassa puolestaan toisen persoonan pronominipositiot määrittyvät usein tietyiksi henkilöhahmoiksi runojen maailmassa, ja pronominipositioiden kautta runoissa rakentuu moniäänisiä dialogeja määrittymättömien henkilöhahmojen välille. Näin lukijan huomio suunnataan ensisijaisesti kommunikaation ja arkipäivän kielenkäytön kliseiden sävyihin ja asiayhteyksiin pikemminkin kuin yksittäisten lausumien sisältöön. A Nest of Ninnies -romaani toimii näennäisestä dialogisuudestaan huolimatta ennen kaikkea yksiäänisesti, sillä romaanin yksiulotteisten henkilöhahmojen esittämiä ajatuksia hallitsee parodioimaan pyrkivä kertojanääni. Ashberyn runojen ja romaanin tarkasteleminen osoittaa, että käsitys runoudesta väistämättä yksiäänisenä ja romaanista moniäänisenä ei ole kaikilta osin ongelmaton. Moniääninen, monimerkityksinen runo voi tarjota toiselle itsenäisen aseman.
Resumo:
Several bioaffinity assays are based on the detection of an analyte which is bound on a solid substrate via biochemical interaction. These so called solid phase assays are based on the adhesion of the primary binding partner on a solid surface, which then binds the analyte to be detected. In this thesis work a novel solid phase based assay technology, known as spot technology, was developed. The spot technology is based on combination of high-capacity solid phases, concentrated in a spot format, utilising modified streptavidin molecules and recombinant antibody fragments. The reduction of the solid phase binding surface to a size of a spot enabled denser binding of the target molecules, providing improved signal intensities and signal-to-background ratio when applied in different solid phase immunoassays. Streptavidin-biotin interactions are commonly utilised in numerous different bioaffinity assays and the ultimate nature of streptavidin to bind biotin is among the strongest non-covalent interaction reported between two biomolecules. In this study native core streptavidin was chemically modified to provide polymerised streptavidin molecules with altered adsorption properties. These streptavidin conjugates, when coated onto polystyrene surface, provided enhanced biotin binding capacity and surface stability when compared to a reference coating constructed with native streptavidin. Furthermore, the combination of chemically modified streptavidin, sitespecifically biotinylated antibody fragments and the spot coating technology provided highly dense solid phase coating with improved binding properties. The performance of the spot assay technology was further demonstrated in different immunoassay configurations. Human thyroid stimulating hormone (TSH) and human cardiac troponin I (cTnI) were used as model analytes to show the applicability of the highly sensitive spot-based solid-phase immunoassay for detection of very low levels of analytes. It was demonstrated that the spot technology provided an assay concept with enhanced sensitivity and short turn-around times, characteristics that are highly suitable for point-of-care applications.
Resumo:
Agricultural wastes from cactus Cereus peruvianus and Opuntia ficus indica were investigated for protein production by solid substrate fermentation. Firstly, the polyelectrolytes were extracted and used in water cleaning as auxiliary of flocculation and coagulation. The remaining fibrous material and peels were used as substrate for fermentation with Aspergillus niger. Glucoamylase and cellulase were the main enzymes produced. Amino acids were determined by HPLC and protein by Lowry's method. After 120 hours of fermentation the protein increased by 12.8%. Aspartic acid (1.27%), threonine (0.97%), glutamic acid (0.88%), valine (0.70%), serine (0.68%), arginine (0.82%), and phenylalanine (0.51%) were the principal amino acids produced.
Resumo:
A rapid, expedient and enantioselective method for the synthesis of beta-hydroxy amines and monosubstituted aziridines in up to 99% e.e., via asymmetric transfer hydrogenation of a-amino ketones and cyclisation through treatment with tosyl chloride and base, is described. (1R,2R)-N-(para-toluenesulfonyl)-1,2-ethylenediamine with formic acid has been utilised as a ligand for the Ruthenium (II) catalysed enantioselective transfer hydrogenation of the ketones.The chiral 2-methyl aziridine, which is a potentially more efficient bonding agent for Rocket Solid Propellant has been successfully achieved.
Resumo:
The aim of this paper is to analyze the effects of intermunicipal cooperation and privatization on the delivery costs of urban solid waste services. The results of our empirical analysis, which we conducted among a sample of very small municipalities, indicate that small towns that cooperate incur lower costs for their waste collection service. Cooperation also raises collection frequency and improves the quality of the service in small towns. By contrast, the form of production, whether it is public or private, does not result in systematic differences in costs. Interestingly, the degree of population dispersion has a significant positive relation with service costs. No evidence of scale economies is found because, it would seem, small municipalities exploit them by means of intermunicipal cooperation.
Resumo:
The empirical literature about factors explaining local government delivery choices has traditionally focused the attention on the public or private production dilemma. However, hybrid organizational forms such as mixed public-private firms are increasingly used in several European countries. This paper makes use of survey data from Spanish municipalities to examine motivations of local governments for engaging in hybrid organizational forms. Data refer to two very relevant local services: water distribution and solid waste collection. The empirical analysis indicates that the use of mixed firms emerge as a type of pragmatically based ‘third way’ between pure public and pure private production. Indeed, local governments make use of mixed firms when cost considerations (scale economies, transaction costs and soon), financial constraints and private interests exert contradictory pressures. On the contrary, political and ideological factors do not play any significant role on the local government decision of engaging or not in joint ventures with private partners.
Resumo:
This study concerns certain problems inherent to the determination of fat-soluble vitamins in food, from extraction methods to identification and quantification. The discussion involves the main official and unofficial extraction methods coupled with spectrophotometric and HPLC techniques in which vitamins samples are obtained through liquid-liquid-solid and liquid-liquid-solid-solid extraction, indispensable to the analytical separation of different chemical compounds with vitamin functions. A saponification stage, possibly coupled with supercritical fluid extraction appears to be mandatory in the determination of vitamins A and E in their alcoholic forms. Alternative identification and quantification procedures are outlined: biological and chemical assays, analytical separations by HPLC (normal and reversed-phase), UV detection (all fat-soluble vitamins) and fluorescence detection (retinoids and tocopherols). Automation from sample preparation to quantification stages increases the data acquisition rate.
Resumo:
Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) or octogen is a white crystalline substance which occurs in four polymorphous forms. It is used in a wide variety of military and industrial formulations owing to its suitable properties. Researchers have demonstrated the usefulness of this energetic material in explosive components. In the present work we apply differential scanning calorimetry (DSC) to measure the a ® d solid-solid phase transition energy of HMX. The results obtained by Kissinger's and Ozawa's methods were 487 and 495 kJ/mol, respectively.
Resumo:
A solid phase extraction procedure using Amberlite XAD-1180/Pyrocatechol violet (PV) chelating resin for the determination of iron and lead ions in various environmental samples was established. The procedure is based on the sorption of lead(II) and iron(III) ions onto the resin at pH 9, followed by elution with 1 mol/L HNO3 and determination by flame atomic absorption spectrometry. The influence of alkaline, earth alkaline and some transition metals, as interferents, are discussed. The recoveries for the spiked analytes were greater than 95%. The detection limits for lead and iron by FAAS were 0.37 µg/L and 0.20 µg/L, respectively. Validation of the method described here was performed by using three certified reference materials (SRM 1515 Apple Leaves, SRM 2711 Montana Soil and NRCC-SLRS-4 Riverine Water). The procedure was successfully applied to natural waters and human hair.
Resumo:
The ERP repetition priming paradigm has been shown to be sensitive to the processing differences between regular and irregular verb forms in English and German. The purpose of the present study is to extend this research to a language with a different inflectional system, Spanish. The design (delayed visual repetition priming) was adopted from our previous study on English, and the specific linguistic phenomena we examined are priming relations between different kinds of stem (or root) forms. There were two experimental conditions: In the first condition, the prime and the target shared the same stem form, e.g., "ando-andar" [I walk-to walk], whereas in the second condition, the prime contained a marked (alternated) stem, e.g., "duermo-dormir" [I sleep-to sleep]. A reduced N400 was found for unmarked (nonalternated) stems in the primed condition, whereas marked stems showed no such effect. Moreover, control conditions demonstrated that the surface form properties (i.e., the different degree of phonetic and orthographic overlap between primes and targets) do not explain the observed priming difference. The ERP priming effect for verb forms with unmarked stems in Spanish is parallel to that found for regularly inflected verb forms in English and German. We argue that effective priming is possible because prime target pairs such as "ando-andar" access the same lexical entry for their stems. By contrast, verb forms with alternated stems (e.g., "duermo") constitute separate lexical entries, and are therefore less powerful primes for their corresponding base forms.
Resumo:
Solid-state MBz compounds, where M stands for bivalent Mn, Fe, Co, Ni, Cu and Zn and Bz is benzoate, have been synthesized. Simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), infrared spectroscopy and complexometry were used to characterize and to study the thermal behaviour of these compounds. The procedure used in the preparation of the compounds via reaction of basic carbonates with benzoic acid is not efficient in eliminating excess acid. However the TG-DTA curves permitted to verify that the binary compounds can be obtained by thermosynthesis, because the benzoic acid can be eliminated before the thermal decomposition of these compounds. The results led to information about the composition, dehydration, thermal stability, thermal decomposition and structure of the isolated compounds. On heating, these compounds decompose in two (Mn, Co, Ni, Zn) or three (Fe, Cu) steps with formation of the respective oxide (Mn3O4, Fe2O3, Co3O4, NiO, CuO and ZnO) as final residue. The theoretical and experimental spectroscopic studies suggest a covalent bidentate bond between ligand and metallic center.