The Iron and Steel Industry in Asia: Development and Restructuring

The paper examines the development and restructuring of the iron and steel industry in Asian countries. Studying countries that have integrated steelworks with large blast furnaces (South Korea, Taiwan, China and India) and countries without (Thailand, Indonesia and Malaysia), the paper shows the difference in the development processes across the countries and across time, and points to the diversity of the development experience of these countries. The paper argues that significant differences in steel production technologies in terms of initial investment and minimum-efficient scale, the changing role of the state, and shifting demand structures in the domestic steel markets of each country have been the important factors that led to the differences in the development path of the steel industry in each country.

How has financial deepening affected poverty reduction in India? : empirical analysis using state-level panel data

This paper examines empirically whether financial deepening has contributed to poverty reduction in India. Using unbalanced panel data for 28 states and union territories between 1973 and 2004, we estimate models in which the poverty ratio is explained by financial deepening, controlling for international openness, inflation rate, and economic growth. From the dynamic generalised method of moments (GMM) estimation, we find that financial deepening and economic growth alleviate poverty, while international openness and the inflation rate have the opposite effect. These results are robust to changes in the poverty ratios in rural areas, urban areas, and the whole economy.

Development strategy in Bihar through revitalizing the agricultural sector : a preliminary analysis

Based mainly on secondary data and partly on primary information obtained through field surveys in selected rural areas in Bihar in 2011, this paper firstly argues the critical importance of agricultural growth for overall economic development, and then reviews the sluggish growth of agriculture in Bihar in the past and examines the major reasons for this. The long-term negligence of agricultural research (especially development and diffusion endeavors for improved rice varieties suitable to the local conditions of Bihar) by the state government and some sort of ‘backwardness’ in tube-well irrigation technology can be pointed out as important constraints. There is, in particular, the ‘paradox’ in Bihar agriculture of why rice and wheat yields have remained so low in spite of the relatively well-developed irrigation by tube-wells. Finally, by showing the process of a rapid increase in autumn and winter rice yields during the 1990s in West Bengal, it is suggested that Bihar farmers and policy-makers should learn from the experience of West Bengal in order to get some hints for the development of the rice sector in Bihar.

Gacaca and DDR : the disputable record of state-building in Rwanda

State-building is currently considered to be an indispensable process in overcoming state fragility: a condition characterized by frequent armed conflicts as well as chronic poverty. In this process, both the capacity and the legitimacy of the state are supposed to be enhanced; such balanced development of capacity and legitimacy has also been demanded in security sector reform (SSR), which is regarded as being a crucial part of post-conflict state-building. To enhance legitimacy, the importance of democratic governance is stressed in both state-building and SSR in post-conflict countries. In reality, however, the balanced enhancement of capacity and legitimacy has rarely been realized. In particular, legitimacy enhancement tends to stagnate in countries in which one of multiple warring parties takes a strong grip on state power. This paper tries to understand why such unbalanced development of state-building and SSR has been observed in post-conflict countries, through a case study of Rwanda. Analyses of two policy initiatives in the security sector - Gacaca transitional justice and disarmament, demobilization, and reintegration (DDR) - indicate that although these programs achieved goals set by the government, their contribution to the normative objectives promoted by the international community was quite debatable. It can be understood that this is because the country has subordinated SSR to its state-building process. After the military victory of the former rebels, the Rwandan Patriotic Front (RPF), the ruling elite prioritized the establishment of political stability over the introduction of international norms such as democratic governance and the rule of law. SSR was implemented only to the extent that it contributed to, and did not threaten, Rwanda's RPF-led state-building.

Development and institutionalization of communitarian thought in Thailand

In Thailand, communitarian ideas have been widely accepted and even institutionalized as a principle of national development plans and the Constitution of Thailand. This paper examines how and why the communitarian body of thought, described as "community culture thought," and originally created and shared within a small circle of social activists and academics in the early 1980s, came to be disseminated and authorized in Thai society. Contributors and participants, ways of expression, and avenues for disseminating this paradigm are the main topics in this paper. The paper reveals that these thoughts and concepts have been diversified and used as guiding principles by state elites, anti-state activists, and social reformists since the late 1980s. These people with such different political ideologies were connected through some key individuals. These critical connections networked them onto the same side for promoting communitarian thought in Thailand. When such leading advocates assumed key political positions, it was easy for them to push communitarian ideas into the guidelines and principles of state administration.

The innovation process of a privately-owned enterprise and a state-owned enterprise in China

This study compares the innovation process of a privately-owned enterprise and a state-owned enterprise in China using their patent data. Huawei and ZTE were selected for this study because they experienced the same historical environment in the same industry from the same region in China leaving their owner types as their critical difference. This study investigates the difference in the innovation process in R&D between a privately-owned and a state-owned enterprise by analyzing (1) domestic and international patent application pattern, (2) co-application and co-applicants, (3) knowledge accumulation inside Huawei and ZTE, and (4) knowledge spillover to domestic and foreign firms.

Development of corrosion of steel bars embedded in mortar made with slag from secondary metallurgy

The aim of this work is to study the evolution of the corrosion rate of reinforcements embedded in mortar specimens that have been partly or fully replaced by the sand ladle furnace white slag. Prisms are manufactured mortar 6cm x 8cm x 2cm in which are embedded reinforcing steel bars of 6mm diameter B500SD. At the time of mixing were added varying amounts of chloride ion content by weight of cement (0%, 0.4%, 0.8%, 1.2%, 2%). The specimens were made totally or partially replacing the white slag, getting four different mixes depending on the degree of substitution. After curing the specimens for 28 days in moist chambers proceeded to dry up naturally. Here are gradually dampened by its conservation in a moist chamber, periodically measuring the corrosion rate of the bars using the technique of polarization curve. The results, in terms of corrosion current and corrosion potential, were compared with those obtained on standard samples, without replacement by slag aggregate. The analysis of results allows us to know, depending on the type of mortar used, the chloride threshold with the depassivation produced steel and the corrosion rates achieved in steels in the active state in terms of mortar moisture, obtained from qualitatively using gravimetric techniques. The results achieved to date support the conclusion that no significant differences in the behavior against corrosion induced by chloride ions, between the steel bars embedded in standard samples and the steel bars embedded in samples including with aggregates from slag. Both the chloride threshold resulting in the depassivation steel as the corrosion rate reached through the bars in an active state are very similar in both types of mortars when they have the same moisture content.

Semantic middleware development for the Internet of Things

After the extraordinary spread of the World Wide Web during the last fifteen years, engineers and developers are pushing now the Internet to its next border. A new conception in computer science and networks communication has been burgeoning during roughly the last decade: a world where most of the computers of the future will be extremely downsized, to the point that they will look like dust at its most advanced prototypes. In this vision, every single element of our “real” world has an intelligent tag that carries all their relevant data, effectively mapping the “real” world into a “virtual” one, where all the electronically augmented objects are present, can interact among them and influence with their behaviour that of the other objects, or even the behaviour of a final human user. This is the vision of the Internet of the Future, which also draws ideas of several novel tendencies in computer science and networking, as pervasive computing and the Internet of Things. As it has happened before, materializing a new paradigm that changes the way entities interrelate in this new environment has proved to be a goal full of challenges in the way. Right now the situation is exciting, with a plethora of new developments, proposals and models sprouting every time, often in an uncoordinated, decentralised manner away from any standardization, resembling somehow the status quo of the first developments of advanced computer networking, back in the 60s and the 70s. Usually, a system designed after the Internet of the Future will consist of one or several final user devices attached to these final users, a network –often a Wireless Sensor Network- charged with the task of collecting data for the final user devices, and sometimes a base station sending the data for its further processing to less hardware-constrained computers. When implementing a system designed with the Internet of the Future as a pattern, issues, and more specifically, limitations, that must be faced are numerous: lack of standards for platforms and protocols, processing bottlenecks, low battery lifetime, etc. One of the main objectives of this project is presenting a functional model of how a system based on the paradigms linked to the Internet of the Future works, overcoming some of the difficulties that can be expected and showing a model for a middleware architecture specifically designed for a pervasive, ubiquitous system. This Final Degree Dissertation is divided into several parts. Beginning with an Introduction to the main topics and concepts of this new model, a State of the Art is offered so as to provide a technological background. After that, an example of a semantic and service-oriented middleware is shown; later, a system built by means of this semantic and service-oriented middleware, and other components, is developed, justifying its placement in a particular scenario, describing it and analysing the data obtained from it. Finally, the conclusions inferred from this system and future works that would be good to be tackled are mentioned as well. RESUMEN Tras el extraordinario desarrollo de la Web durante los últimos quince años, ingenieros y desarrolladores empujan Internet hacia su siguiente frontera. Una nueva concepción en la computación y la comunicación a través de las redes ha estado floreciendo durante la última década; un mundo donde la mayoría de los ordenadores del futuro serán extremadamente reducidas de tamaño, hasta el punto que parecerán polvo en sus más avanzado prototipos. En esta visión, cada uno de los elementos de nuestro mundo “real” tiene una etiqueta inteligente que porta sus datos relevantes, mapeando de manera efectiva el mundo “real” en uno “virtual”, donde todos los objetos electrónicamente aumentados están presentes, pueden interactuar entre ellos e influenciar con su comportamiento el de los otros, o incluso el comportamiento del usuario final humano. Ésta es la visión del Internet del Futuro, que también toma ideas de varias tendencias nuevas en las ciencias de la computación y las redes de ordenadores, como la computación omnipresente y el Internet de las Cosas. Como ha sucedido antes, materializar un nuevo paradigma que cambia la manera en que las entidades se interrelacionan en este nuevo entorno ha demostrado ser una meta llena de retos en el camino. Ahora mismo la situación es emocionante, con una plétora de nuevos desarrollos, propuestas y modelos brotando todo el rato, a menudo de una manera descoordinada y descentralizada lejos de cualquier estandarización, recordando de alguna manera el estado de cosas de los primeros desarrollos de redes de ordenadores avanzadas, allá por los años 60 y 70. Normalmente, un sistema diseñado con el Internet del futuro como modelo consistirá en uno o varios dispositivos para usuario final sujetos a estos usuarios finales, una red –a menudo, una red de sensores inalámbricos- encargada de recolectar datos para los dispositivos de usuario final, y a veces una estación base enviando los datos para su consiguiente procesado en ordenadores menos limitados en hardware. Al implementar un sistema diseñado con el Internet del futuro como patrón, los problemas, y más específicamente, las limitaciones que deben enfrentarse son numerosas: falta de estándares para plataformas y protocolos, cuellos de botella en el procesado, bajo tiempo de vida de las baterías, etc. Uno de los principales objetivos de este Proyecto Fin de Carrera es presentar un modelo funcional de cómo trabaja un sistema basado en los paradigmas relacionados al Internet del futuro, superando algunas de las dificultades que pueden esperarse y mostrando un modelo de una arquitectura middleware específicamente diseñado para un sistema omnipresente y ubicuo. Este Proyecto Fin de Carrera está dividido en varias partes. Empezando por una introducción a los principales temas y conceptos de este modelo, un estado del arte es ofrecido para proveer un trasfondo tecnológico. Después de eso, se muestra un ejemplo de middleware semántico orientado a servicios; después, se desarrolla un sistema construido por medio de este middleware semántico orientado a servicios, justificando su localización en un escenario particular, describiéndolo y analizando los datos obtenidos de él. Finalmente, las conclusiones extraídas de este sistema y las futuras tareas que sería bueno tratar también son mencionadas.

A review of the potential of renewable energy sources for the State of Jammu and Kashmir (India)

The future economic development trajectory for India is likely to result in rapid and accelerated growth in energy demand, with expected shortages. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy-conservation and energy-efficiency can make an important contribution in the national energy strategy, renewable energies will be essential to the solution and are likely to play an increasingly important role for the growth of grid power, providing energy access, reducing consumption of fossil fuels, and helping India pursue its low carbon progressive pathway. However, most of the states in India, like the northernmost State of Jammu and Kashmir (J&K), have experienced an energy crisis over a sustained period of time. As India intends to be one of the emerging powers of the 21st century, it has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within J&K and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.

Potential of the renewable energy development in Jammu and Kashmir, India

The future economic growth for India is likely to result in rapid and accelerated surge in energy demand, with expected shortages in terms of supply. Many of its current policies and strategies are aimed at the improvement and possible maximization of energy production from the renewable sector. It is also clear that while energy conservation and energy efficiency can make an important contribution, renewable energies will be essential to the solution and are likely to play an increasingly important role for providing enhanced energy access, reducing consumption of fossil fuels, and helping India pursue its low-carbon progressive pathway. However, most of the states in India, like the northernmost state of Jammu and Kashmir, have experienced an energy crisis over a sustained period of time and the government both at center and state level has to embark upon with these pressing issues in a more sustainable manner and accordingly initiate various renewable energy projects within these states. This paper will provide a broad-spectrum view about the energy situation within Jammu and Kashmir and will highlight the current policies along with future strategies for the optimal utilization of renewable energy resources.

Social issues in sustainable supply chain networks: state of the art and further research directions

The study of supply networks sustainability is a field with a long path behind. Nonetheless, most studies to date are focused on the environmental sub dimension of sustainability, while the social perspective in supply chain networks research still shows a potential for pioneering contri butions. Moreover, from the development standpoint we have observed a paradigm shift advancing from a narrow concept of development, centered on purely economic dimensions, towards more refined issues such as inclusive business, shared value or poverty footprint, all of which are highly related to supply chain activities. In this paper we present a review of the current state of the art on social sustainability of supply chains and we identify the main existing trends in this field. After conducting this study, we can state that a new sphere of knowledge is emerging at the interface between sustainable supply chain networks and development research. The academic community is called to play an important dovetailing role in this scenario by advancing both conceptual and methodological contributions.

Design and Development of 35 % Efficient and lOOOX CPV Module with Sufficient Optical Alignment Tolerance

Modules are an important part of the CPV system. By pursing, in our objective of a 35% efficiency module, we need to look forward a significant improvement in the state of the art of CPV modules since no commercial module is capable of achieving that efficiency. Achieving this efficiency will require high efficiency cells, progress in the optics lenses that are implemented in these modules, and also integration into module. Basic design of 35% CPV module is presented considering for practical and rapid industry application. The output is 385 W while its weight is only 18 kg. In spite of its high concentration ratio reaching 1,000 X, it acceptance angle is as high as 1.1 degree.

A component library to improve the reusability in the development of converged services

The evolution of communications networks to Next Generation Networks (NGN) has encouraged the development of new services. Nowadays, several technologies are being integrated into telecommunications services in order to provide new functionalities, resulting in what are known as converged services. The objective is to adapt the behavior of the services to the necessities of different users, generating customized services. Some of the main technologies involved in their development are those related to the Web. But due to this type of services implies the combination of different technologies, their development is a very complex process that has to be improved to reduce the time and cost required, with the aim of promoting the success of such services. This paper proposes to apply software reuse through the utilization of a component library and presents one focused on ECharts for SIP Servlets (E4SS). It is a framework, based on the SIP Servlet specification, which uses finite state machines for the definition of converged communications services. Also, to promote the use of the library, a methodology is proposed in order to facilitate the integration between the library operations and the software development cycle.

Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder

Con esta tesis ”Desarrollo de una Teoría Uniforme de la Difracción para el Análisis de los Campos Electromagnéticos Dispersados y Superficiales sobre un Cilindro” hemos iniciado una nueva línea de investigación que trata de responder a la siguiente pregunta: ¿cuál es la impedancia de superficie que describe una estructura de conductor eléctrico perfecto (PEC) convexa recubierta por un material no conductor? Este tipo de estudios tienen interés hoy en día porque ayudan a predecir el campo electromagnético incidente, radiado o que se propaga sobre estructuras metálicas y localmente convexas que se encuentran recubiertas de algún material dieléctrico, o sobre estructuras metálicas con pérdidas, como por ejemplo se necesita en determinadas aplicaciones aeroespaciales, marítimas o automovilísticas. Además, desde un punto de vista teórico, la caracterización de la impedancia de superficie de una estructura PEC recubierta o no por un dieléctrico es una generalización de varias soluciones que tratan ambos tipos de problemas por separado. En esta tesis se desarrolla una teoría uniforme de la difracción (UTD) para analizar el problema canónico del campo electromagnético dispersado y superficial en un cilindro circular eléctricamente grande con una condición de contorno de impedancia (IBC) para frecuencias altas. Construir una solución basada en UTD para este problema canónico es crucial en el desarrollo de un método UTD para el caso más general de una superficie arbitrariamente convexa, mediante el uso del principio de localización de los campos electromagnéticos a altas frecuencias. Esta tesis doctoral se ha llevado a cabo a través de una serie de hitos que se enumeran a continuación, enfatizando las contribuciones a las que ha dado lugar. Inicialmente se realiza una revisión en profundidad del estado del arte de los métodos asintóticos con numerosas referencias. As í, cualquier lector novel puede llegar a conocer la historia de la óptica geométrica (GO) y la teoría geométrica de la difracción (GTD), que dieron lugar al desarrollo de la UTD. Después, se investiga ampliamente la UTD y los trabajos más importantes que pueden encontrarse en la literatura. As í, este capítulo, nos coloca en la posición de afirmar que, hasta donde nosotros conocemos, nadie ha intentado antes llevar a cabo una investigación rigurosa sobre la caracterización de la impedancia de superficie de una estructura PEC recubierta por un material dieléctrico, utilizando para ello la UTD. Primero, se desarrolla una UTD para el problema canónico de la dispersión electromagnética de un cilindro circular eléctricamente grande con una IBC uniforme, cuando es iluminado por una onda plana con incidencia oblicua a frecuencias altas. La solución a este problema canónico se construye a partir de una solución exacta mediante una expansión de autofunciones de propagación radial. Entonces, ésta se convierte en una nueva expansión de autofunciones de propagación circunferencial muy apropiada para cilindros grandes, a través de la transformación de Watson. De esta forma, la expresión del campo se reduce a una integral que se evalúa asintóticamente, para altas frecuencias, de manera uniforme. El resultado se expresa según el trazado de rayos descrito en la UTD. La solución es uniforme porque tiene la importante propiedad de mantenerse continua a lo largo de la región de transición, a ambos lados de la superficie del contorno de sombra. Fuera de la región de transición la solución se reduce al campo incidente y reflejado puramente ópticos en la región iluminada del cilindro, y al campo superficial difractado en la región de sombra. Debido a la IBC el campo dispersado contiene una componente contrapolar a causa de un acoplamiento entre las ondas TEz y TMz (donde z es el eje del cilindro). Esta componente contrapolar desaparece cuando la incidencia es normal al cilindro, y también en la región iluminada cuando la incidencia es oblicua donde el campo se reduce a la solución de GO. La solución UTD presenta una muy buena exactitud cuando se compara numéricamente con una solución de referencia exacta. A continuación, se desarrolla una IBC efectiva para el cálculo del campo electromagnético dispersado en un cilindro circular PEC recubierto por un dieléctrico e iluminado por una onda plana incidiendo oblicuamente. Para ello se derivan dos impedancias de superficie en relación directa con las ondas creeping y de superficie TM y TE que se excitan en un cilindro recubierto por un material no conductor. Las impedancias de superficie TM y TE están acopladas cuando la incidencia es oblicua, y dependen de la geometría del problema y de los números de onda. Además, se ha derivado una impedancia de superficie constante, aunque con diferente valor cuando el observador se encuentra en la zona iluminada o en la zona de sombra. Después, se presenta una solución UTD para el cálculo de la dispersión de una onda plana con incidencia oblicua sobre un cilindro eléctricamente grande y convexo, mediante la generalización del problema canónico correspondiente al cilindro circular. La solución asintótica es uniforme porque se mantiene continua a lo largo de la región de transición, en las inmediaciones del contorno de sombra, y se reduce a la solución de rayos ópticos en la zona iluminada y a la contribución de las ondas de superficie dentro de la zona de sombra, lejos de la región de transición. Cuando se usa cualquier material no conductor se excita una componente contrapolar que tiende a desaparecer cuando la incidencia es normal al cilindro y en la región iluminada. Se discuten ampliamente las limitaciones de las fórmulas para la impedancia de superficie efectiva, y se compara la solución UTD con otras soluciones de referencia, donde se observa una muy buena concordancia. Y en tercer lugar, se presenta una aproximación para una impedancia de superficie efectiva para el cálculo de los campos superficiales en un cilindro circular conductor recubierto por un dieléctrico. Se discuten las principales diferencias que existen entre un cilindro PEC recubierto por un dieléctrico desde un punto de vista riguroso y un cilindro con una IBC. Mientras para un cilindro de impedancia se considera una impedancia de superficie constante o uniforme, para un cilindro conductor recubierto por un dieléctrico se derivan dos impedancias de superficie. Estas impedancias de superficie están asociadas a los modos de ondas creeping TM y TE excitadas en un cilindro, y dependen de la posición y de la orientación del observador y de la fuente. Con esto en mente, se deriva una solución UTD con IBC para los campos superficiales teniendo en cuenta las dependencias de la impedancia de superficie. La expansión asintótica se realiza, mediante la transformación de Watson, sobre la representación en serie de las funciones de Green correspondientes, evitando as í calcular las derivadas de orden superior de las integrales de tipo Fock, y dando lugar a una solución rápida y precisa. En los ejemplos numéricos realizados se observa una muy buena precisión cuando el cilindro y la separación entre el observador y la fuente son grandes. Esta solución, junto con el método de los momentos (MoM), se puede aplicar para el cálculo eficiente del acoplamiento mutuo de grandes arrays conformados de antenas de parches. Los métodos propuestos basados en UTD para el cálculo del campo electromagnético dispersado y superficial sobre un cilindro PEC recubierto de dieléctrico con una IBC efectiva suponen un primer paso hacia la generalización de una solución UTD para superficies metálicas convexas arbitrarias cubiertas por un material no conductor e iluminadas por una fuente electromagnética arbitraria. ABSTRACT With this thesis ”Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder” we have initiated a line of investigation whose goal is to answer the following question: what is the surface impedance which describes a perfect electric conductor (PEC) convex structure covered by a material coating? These studies are of current and future interest for predicting the electromagnetic (EM) fields incident, radiating or propagating on locally smooth convex parts of highly metallic structures with a material coating, or by a lossy metallic surfaces, as for example in aerospace, maritime and automotive applications. Moreover, from a theoretical point of view, the surface impedance characterization of PEC surfaces with or without a material coating represents a generalization of independent solutions for both type of problems. A uniform geometrical theory of diffraction (UTD) is developed in this thesis for analyzing the canonical problem of EM scattered and surface field by an electrically large circular cylinder with an impedance boundary condition (IBC) in the high frequency regime, by means of a surface impedance characterization. The construction of a UTD solution for this canonical problem is crucial for the development of the corresponding UTD solution for the more general case of an arbitrary smooth convex surface, via the principle of the localization of high frequency EM fields. The development of the present doctoral thesis has been carried out through a series of landmarks that are enumerated as follows, emphasizing the main contributions that this work has given rise to. Initially, a profound revision is made in the state of art of asymptotic methods where numerous references are given. Thus, any reader may know the history of geometrical optics (GO) and geometrical theory of diffraction (GTD), which led to the development of UTD. Then, the UTD is deeply investigated and the main studies which are found in the literature are shown. This chapter situates us in the position to state that, as far as we know, nobody has attempted before to perform a rigorous research about the surface impedance characterization for material-coated PEC convex structures via UTD. First, a UTD solution is developed for the canonical problem of the EM scattering by an electrically large circular cylinder with a uniform IBC, when it is illuminated by an obliquely incident high frequency plane wave. A solution to this canonical problem is first constructed in terms of an exact formulation involving a radially propagating eigenfunction expansion. The latter is converted into a circumferentially propagating eigenfunction expansion suited for large cylinders, via the Watson transformation, which is expressed as an integral that is subsequently evaluated asymptotically, for high frequencies, in a uniform manner. The resulting solution is then expressed in the desired UTD ray form. This solution is uniform in the sense that it has the important property that it remains continuous across the transition region on either side of the surface shadow boundary. Outside the shadow boundary transition region it recovers the purely ray optical incident and reflected ray fields on the deep lit side of the shadow boundary and to the modal surface diffracted ray fields on the deep shadow side. The scattered field is seen to have a cross-polarized component due to the coupling between the TEz and TMz waves (where z is the cylinder axis) resulting from the IBC. Such cross-polarization vanishes for normal incidence on the cylinder, and also in the deep lit region for oblique incidence where it properly reduces to the GO or ray optical solution. This UTD solution is shown to be very accurate by a numerical comparison with an exact reference solution. Then, an effective IBC is developed for the EM scattered field on a coated PEC circular cylinder illuminated by an obliquely incident plane wave. Two surface impedances are derived in a direct relation with the TM and TE surface and creeping wave modes excited on a coated cylinder. The TM and TE surface impedances are coupled at oblique incidence, and depend on the geometry of the problem and the wave numbers. Nevertheless, a constant surface impedance is found, although with a different value when the observation point lays in the lit or in the shadow region. Then, a UTD solution for the scattering of an obliquely incident plane wave on an electrically large smooth convex coated PEC cylinder is introduced, via a generalization of the canonical circular cylinder problem. The asymptotic solution is uniform because it remains continuous across the transition region, in the vicinity of the shadow boundary, and it recovers the ray optical solution in the deep lit region and the creeping wave formulation within the deep shadow region. When a coating is present a cross-polar field term is excited, which vanishes at normal incidence and in the deep lit region. The limitations of the effective surface impedance formulas are discussed, and the UTD solution is compared with some reference solutions where a very good agreement is met. And in third place, an effective surface impedance approach is introduced for determining surface fields on an electrically large coated metallic circular cylinder. Differences in analysis of rigorouslytreated coated metallic cylinders and cylinders with an IBC are discussed. While for the impedance cylinder case a single constant or uniform surface impedance is considered, for the coated metallic cylinder case two surface impedances are derived. These are associated with the TM and TE creeping wave modes excited on a cylinder and depend on observation and source positions and orientations. With this in mind, a UTD based method with IBC is derived for the surface fields by taking into account the surface impedance variation. The asymptotic expansion is performed, via the Watson transformation, over the appropriate series representation of the Green’s functions, thus avoiding higher-order derivatives of Fock-type integrals, and yielding a fast and an accurate solution. Numerical examples reveal a very good accuracy for large cylinders when the separation between the observation and the source point is large. Thus, this solution could be efficiently applied in mutual coupling analysis, along with the method of moments (MoM), of large conformal microstrip array antennas. The proposed UTD methods for scattered and surface EM field analysis on a coated PEC cylinder with an effective IBC are considered the first steps toward the generalization of a UTD solution for large arbitrarily convex smooth metallic surfaces covered by a material coating and illuminated by an arbitrary EM source.

Development and characterization of an FK photovoltaic concentrator for maximum conversion efficiency

The outdoor measurements of a single-cell concentrator PV module reaching a regressed 35.6% efficiency and a maximum peak efficiency of 36.0% (both corrected @Tcell=25ºC) are presented. This is the result of the joint effort by LPI and Solar Junction to demonstrate the potential of combining their respective state-of-the-art concentrator optics and solar cells. The LPI concentrator used is an FK, which is an advanced nonimaging concentrator using 4-channel Köhler homogenization, with a primary Fresnel lens and a refractive secondary made of glass. Solar Junction’s cell is a triplejunction solar cell with the A-SLAMTM architecture using dilute-nitrides.