Cognitive-reminiscence therapy and usual care for depression in young adults: study protocol for a randomized controlled trial

Background
Depression is a common affliction for young adults, and is associated with a range of adverse outcomes. Cognitive-reminiscence therapy is a brief, structured intervention that has been shown to be highly effective for reducing depressive symptoms, yet to date has not been evaluated in young adult populations. Given its basis in theory-guided reminiscence-based therapy, and incorporation of effective therapeutic techniques drawn from cognitive therapy and problem-solving frameworks, it is hypothesized to be effective in treating depression in this age group.

Methods and design
This article presents the design of a randomized controlled trial implemented in a community-based youth mental health service to compare cognitive-reminiscence therapy with usual care for the treatment of depressive symptoms in young adults. Participants in the cognitive-reminiscence group will receive six sessions of weekly, individual psychotherapy, whilst participants in the usual-care group will receive support from the youth mental health service according to usual procedures. A between-within repeated-measures design will be used to evaluate changes in self-reported outcome measures of depressive symptoms, psychological wellbeing and anxiety across baseline, three weeks into the intervention, post-intervention, one month post-intervention and three months post-intervention. Interviews will also be conducted with participants from the cognitive-reminiscence group to collect information about their experience receiving the intervention, and the process underlying any changes that occur.

Discussion
This study will determine whether a therapeutic approach to depression that has been shown to be effective in older adult populations is also effective for young adults. The expected outcome of this study is the validation of a brief, evidence-based, manualized treatment for young adults with depressive symptoms.

A cluster-randomised, controlled trial to assess the impact of a workplace osteoporosis prevention intervention on the dietary and physical activity behaviours of working women: study protocol

Background Osteoporosis is a debilitating disease and its risk can be reduced through adequate calcium consumption and physical activity. This protocol paper describes a workplace-based intervention targeting behaviour change in premenopausal women working in sedentary occupations. Method/Design A cluster-randomised design was used, comparing the efficacy of a tailored intervention to standard care. Workplaces were the clusters and units of randomisation and intervention. Sample size calculations incorporated the cluster design. Final number of clusters was determined to be 16, based on a cluster size of 20 and calcium intake parameters (effect size 250 mg, ICC 0.5 and standard deviation 290 mg) as it required the highest number of clusters. Sixteen workplaces were recruited from a pool of 97 workplaces and randomly assigned to intervention and control arms (eight in each). Women meeting specified inclusion criteria were then recruited to participate. Workplaces in the intervention arm received three participatory workshops and organisation wide educational activities. Workplaces in the control/standard care arm received print resources. Intervention workshops were guided by self-efficacy theory and included participatory activities such as goal setting, problem solving, local food sampling, exercise trials, group discussion and behaviour feedback. Outcomes measures were calcium intake (milligrams/day) and physical activity level (duration: minutes/week), measured at baseline, four weeks and six months post intervention. Discussion This study addresses the current lack of evidence for behaviour change interventions focussing on osteoporosis prevention. It addresses missed opportunities of using workplaces as a platform to target high-risk individuals with sedentary occupations. The intervention was designed to modify behaviour levels to bring about risk reduction. It is the first to address dietary and physical activity components each with unique intervention strategies in the context of osteoporosis prevention. The intervention used locally relevant behavioural strategies previously shown to support good outcomes in other countries. The combination of these elements have not been incorporated in similar studies in the past, supporting the study hypothesis that the intervention will be more efficacious than standard practice in osteoporosis prevention through improvements in calcium intake and physical activity.

Offline grouping proof protocol for RFID systems

Several grouping proof protocols have been proposed over the years but they are either found to be vulnerable to certain attacks or do not comply with EPC Class-1 Gen-2 (C1G2) standard because they use hash functions or other complex encryption schemes. Also, synchronization of keys, forward security, proving simultaneity, creating dependence, detecting illegitimate tags, eliminating unwanted tag processing and denial-of-proof (DoP) attacks have not been fully addressed by many. Our protocol addresses these important gaps and is based on Quadratic Residues property where the tags are only required to use XOR, 128-bit Pseudo Random Number Generators (PRNG) and Modulo (MOD) operations which can be easily implemented on low-cost passive tags and hence achieves EPC C1G2 compliance.

A protocol for improving fabrication yield of thin SU-8 microcantilevers for use in an aptasensor

SU-8 negative photoresist has been extensively employed in the fabrication of microfluidics and microelectromechanical systems. This is due to its advantages including ease of fabrication using limited equipment, biocompatibility, excellent chemical resistance, and compatibility with silicon processing. In addition, its low Young’s modulus compared to silicon has made it an excellent choice for microcantilever structure development especially for sensing applications. This paper presents a fabrication protocol for the development of thin SU-8 microcantilevers. Factors such as baking temperatures and release methods that influence the fabrication yield of SU-8 microcantilevers are considered. The influence of the baking temperature on the deformation of the SU-8 structure is investigated using the finite element method and verified experimentally. Three release methods are studied including a dry release method using fluorocarbon film, and two wet release methods using OmniCoat sacrificial layer and polymethyl methacrylate (PMMA) sacrificial layer. The wet release method using PMMA sacrificial layer produced the highest yield. An aptasensor is formed using the SU-8 microcantilever, and its deflection measured for thrombin detection.

Development and assessment of an incremental fatigue protocol for contemporary dance

Nine trained contemporary dancers performed a modality-specific, heart-rate-monitored, choreographed fatiguing dance protocol with an assumption of fatigue at volitional exhaustion (RPE 16). Postural stability was assessed as the variability of ground reaction forces and the centre of pressure during the performance of a flat-foot arabesque. Psychological response was assessed using self-reported fatigue, psychological distress (PD), and psychological well-being (PWB) (Subjective Exercise Experience Scale). After reaching RPE 16 in 15.7 ± 2.6 mins, heart rate decreased to the post-warm-up level within 64 ± 9 sec. Variability of ground reaction forces or the centre of pressure was not changed. There were no significant changes in fatigue, psychological distress, or psychological well-being. Within fatigue, there was a significant increase in the item tired (p = 0.04). As supported by the heart rate data and RPE, the protocol achieved an appropriate level of physical demand. No changes in the stability indices were observed, possibly attributed to the rapid recovery in heart rate. The expression of only tiredness suggests the use of a disassociative attentional style by the dancers. The project represents pilot work toward the validation of a monitoring process that supports dancer health and awareness training.

Cost-effectiveness of reducing salt intake in the Pacific Islands: protocol for a before and after intervention study

Background
There is broad consensus that diets high in salt are bad for health and that reducing salt intake is a cost-effective strategy for preventing chronic diseases. The World Health Organization has been supporting the development of salt reduction strategies in the Pacific Islands where salt intakes are thought to be high. However, there are no accurate measures of salt intake in these countries. The aims of this project are to establish baseline levels of salt intake in two Pacific Island countries, implement multi-pronged, cross-sectoral salt reduction programs in both, and determine the effects and cost-effectiveness of the intervention strategies.

Methods/Design
Intervention effectiveness will be assessed from cross-sectional surveys before and after population-based salt reduction interventions in Fiji and Samoa. Baseline surveys began in July 2012 and follow-up surveys will be completed by July 2015 after a 2-year intervention period.

A three-stage stratified cluster random sampling strategy will be used for the population surveys, building on existing government surveys in each country. Data on salt intake, salt levels in foods and sources of dietary salt measured at baseline will be combined with an in-depth qualitative analysis of stakeholder views to develop and implement targeted interventions to reduce salt intake.

Discussion
Salt reduction is a global priority and all Member States of the World Health Organization have agreed on a target to reduce salt intake by 30% by 2025, as part of the global action plan to reduce the burden of non-communicable diseases. The study described by this protocol will be the first to provide a robust assessment of salt intake and the impact of salt reduction interventions in the Pacific Islands. As such, it will inform the development of strategies for other Pacific Island countries and comparable low and middle-income settings around the world.

Protocol for a collaborative meta-analysis of 5-HTTLPR, stress, and depression

Background: Debate is ongoing about what role, if any, variation in the serotonin transporter linked polymorphic region (5-HTTLPR) plays in depression. Some studies report an interaction between 5-HTTLPR variation and stressful life events affecting the risk for depression, others report a main effect of 5-HTTLPR variation on depression, while others find no evidence for either a main or interaction effect. Meta-analyses of multiple studies have also reached differing conclusions.

Methods/Design: To improve understanding of the combined roles of 5-HTTLPR variation and stress in the development of depression, we are conducting a meta-analysis of multiple independent datasets. This coordinated approach utilizes new analyses performed with centrally-developed, standardized scripts. This publication documents the protocol for this collaborative, consortium-based meta-analysis of 5-HTTLPR variation, stress, and depression.

Study eligibility criteria: Our goal is to invite all datasets, published or unpublished, with 5-HTTLPR genotype and assessments of stress and depression for at least 300 subjects. This inclusive approach is to minimize potential impact from publication bias.

Data sources: This project currently includes investigators from 35 independent groups, providing data on at least N = 33,761 participants.  The analytic plan was determined prior to starting data analysis. Analyses of individual study datasets will be performed by the investigators who collected the data using centrally-developed standardized analysis scripts to ensure a consistent analytical approach across sites. The consortium as a group will review and interpret the meta-analysis results.

Discussion: Variation in 5-HTTLPR is hypothesized to moderate the response to stress on depression. To test specific hypotheses about the role of 5-HTTLPR variation on depression, we will perform coordinated meta-analyses of de novo results obtained from all available data, using variables and analyses determined a priori. Primary analyses, based on the original 2003 report by Caspi and colleagues of a GxE interaction will be supplemented by secondary analyses to help interpret and clarify issues ranging from the mechanism of effect to heterogeneity among the contributing studies. Publication of this protocol serves to protect this project from biased reporting and to improve the ability of readers to interpret the results of this specific meta-analysis upon its completion.

Design of a norm-bounded LQG controller for power distribution networks with distributed generation

This paper presents a novel excitation control design to improve the voltage profile of power distribution networks with distributed generation and induction motor loads. The system is linearised by perturbation technique. Controller is designed using the linear-quadratic-Gaussian (LQG) controller synthesis method. The LQG controller is addressed with norm-bounded uncertainty. The approach considered in this paper is to find the smallest upper bound on the H∞ norm of the uncertain system and to design an optimal controller based on this bound. The design method requires the solution of a linear matrix inequality. The performance of the controller is tested on a benchmark power distribution system. Simulation results show that the proposed controller provides impressive oscillation damping compared to the conventional excitation controller.

Genetic algorithm based PI controller tuning for induction motor drive with ANN flux estimator

This paper presents a Genetic Algorithm (GA) based fast speed response controller for poly-phase induction motor drive. Here the proportional and integral gains of PI controller are optimized by GA to achieve quick speed response. An adaptive Recurrent Neural Network (RNN) with Real Time Recurrent Learning (RTRL) algorithm is proposed to estimate rotor flux. An online tuning scheme to update the weight of RNN is presented to overcome stator resistance variation problem. This tuning scheme requires torque estimator to calculate the torque error. Space vector modulation (SVM) technique is used to produce the motor input voltage. Simulation tests have been performed to study the dynamic performances of the drive system for both the classical PI and the genetic algorithm based PI controllers.

Stability analysis of grid-connected photovoltaic systems using a linear zero dynamic controller

This paper proposed a new linear zero dynamic controller (LZDC) for

Bloom filter based secure and anonymous DSR protocol in wireless ad hoc networks

Wireless ad hoc networks, especially in the hostile environment, are vulnerable to traffic analysis which allows the adversary to trace the routing messages and the sensitive data packets. Anonymity mechanism in ad hoc networks is a critical securing measure method employed to mitigate these problems. In this paper, we propose a novel secure and anonymous source routing protocol, called SADSR, based on Dynamic Source Routing (DSR) for wireless ad hoc networks. In the proposed scheme, we use the pseudonym, pseudonym based cryptography and the bloom filter to establish secure and anonymous routing in wireless ad hoc networks. Compared to other anonymous routing protocol, SADSR is not only anonymous but also the secure in the routing discover process and data transmission process.