Técnicas de obtenção da posição de relação central em pacientes edêntulos

Edentulism causes loss of horizontal intermaxillary relationship, which is defined by the condyle position in the joint cavities, called centric relation. The correct record of centric relation in edentulous pacients has a strong influence on the treatment final result and is considered one of the most difficult clinical steps to achieve success. The aim of this study was to describe the main centric relation recording methods for edentulous patients reported in the literature. The study described physiological methods such as swallowing and pull tongue back, manipulative and graphic methods. It is concluded that the combination of different methods facilitates the correct centric relation record. Dentists must have a good knowledge of those techniques to perform this procedure satisfactorily.

Princípios de redução das fraturas panfaciais: revisão de literatura

Are called panfacial fractures when the upper, middle and lower facial thirds present fractures concurrently. In clinical practice, came to imply the involvement of two facial thirds. Panfacial fractures are usually accompanied by other systemic lesions that impair the patient's life and therefore require primary treatment. Almost invariably are associated with damage to soft tissues and severe losses of bone structures which may lead to severe facial deformations and malocclusions. The panfacial fractures treatment is complex because often there isn’t a stable bone structure to guide the reduction of various fractures. Several orders of treatment have been proposed, but they are variations of the two classical approaches "bottom to top and inside-out" and "top to bottom and out-inside". The aim of this paper is to discuss the principles of management and panfacial fractures treatment, emphasizing the sequence of fracture reduction and highlighting its indications, advantages and disadvantages, through literature review and reports of surgical clinic cases. We conclude that the exact sequence of fracture reduction is not as important as developing a treatment plan that allows accurate positioning of the fractured segments.

Percepção de acadêmicos de odontologia sobre o envelhecimento

The changes on learning space where Dentistry Students stay in front of social reality, by university extension, represent a strategy to form dentists according to Brazilian Curricular Directresses. In Araçatuba Dental School (FOA-UNESP), one of alternatives to add students on real locals of dentistry practices is the “Always Smiling Project – Dental Attention for institutionalized elderly in Araçatuba City, São Paulo State – Brazil”. The aim of this study was to verify the self-perception of dentistry students about aging before and after participation in this Project during one school year. To data collection, an instrument with 3 opened questions was performed and applied on 45 students, in the beginning of activities in 2009 and after 8 months. The answers were analyzed by content categorization. The results showed that the perception of students about old people was negative relating them with frail person that needs help and the students’ expectations were higher about clinical aspects of attention. In the end of school year was clear the difference of students’ comprehension about aging and their thoughts demonstrated the empathy resulting from relation. Besides, students related knowledge gain and noted that health attention involve others aspects that are over than biological space. It was possible to conclude that insertion of students in “Always Smiling” contributed to reflection and learn about aging process and suggest that practices like these should be added in Brazilian Universities.

Aplicação de princípios de ergonomia no atendimento odontológico

The dentist has been suggested as a professional vulnerable to labor risks mainly related to working posture. This study examined the application of ergonomics principles during the dental attendances made by university student of the last period of the Araçatuba Dental University. Twenty-four attendants were photographed and the images were digitally analyzed for the verification of 10 requirements that determine a healthy labor posture, defined by the project ISO Standard / TC 106/SC 6 N 411. It was observed that 50% of items from the check list obtained higher percentages of negative replies. The students had greater difficulties as to the correct position of the angle between the upper and lower leg when sitting, the ideal adjustment of the light focus reflector in the field of work and the patient positioning. It was concluded that the dental attendances were held without compliance with the ergonomic requirements. The greatest difficulties regarding the work posture were the sitting posture, the light beam and the patient positioning. Students need better guidance about ergonomic principles and requirements, which should occur at any time of life, but earliest they are installed, greater the benefits, assimilation and incorporation of adequate working postures will be. We need a reform that addresses all sectors of the dental system, so that learning and application of ergonomics in dentistry become effective, efficient and effective.

Protocolo radiográfico para a instalação de mini-implantes: descrição da técnica

In the last decade mini-screws have gained popularity in orthodontics field and a correct placement of mini-screws is a critical point to the success of the skeletal anchorage. A careful clinical and radiographic diagnostic before insertion mini-screw is an essential requirement to achieve the central point of the radicular septum. The correct application of these pre-surgical procedures should avoid possible iatrogenic damages in periodontal ligament, dental roots, nasomaxillary cavities, or even important vascular tissues. As of today, periapical radiographs is a regular pre surgical procedure during mini-screw insertion technique. Nevertheless, accurate execution of the radiographic parallax technique can offer to us useful and precise radiographic images, to decide the right local insertion of mini-screws in to the septum bone. The purpose of this paper is to describe the ¬application of new positioning circular guides in conjunction with a ¬parallax radiographic protocol before placement of orthodontic mini-screws.

Identificação de bandas espectrais para detecção de cultura de cana-de-açúcar sadia e doente utilizando câmara hiperespectral embarcada em VANT

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Disposição construtiva em cadeira de banho para indivíduos com deficiência física motora e/ou com falta de estabilidade ou sustentação do tronco corporal

O presente modelo de utilidade descreve uma disposição construtiva em cadeira de banho para indivíduos com deficiência física motora e/ou com falta de estabilidade ou sustentação do tronco corporal que apresenta a estrutura do assento e do encosto de espuma de polietileno expandido de alta densidade, substituindo os convencionais revestimentos de material sintético, que não garante conforto ao usuário quando molhado e que se degenera rapidamente tendo em vista a umidade a que se encontra exposto, e alavancas dispostas nas laterais do assento interligadas à braços que se projetam descendentes com porção extrema inferior dotada de um batente que envolve a porção anterior das rodas frontais, evitando os tombamentos frontais nas situações de alteração do posicionamento do usuário em relação ao centro de gravidade da cadeira.

Análise das tensões em próteses implantossuportadas esplintadas, variando o tipo de conexão protética e a inclinação do implante: estudo pelo método dos elementos finitos tridimensionais não linear

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise do comportamento da bateria utilizada em sistemas fotovoltáicos de pequeno porte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparativo ergonômico de duas metododologias para aquisição de coordenadas tridimensionais do posto de trabalho do operador de trato

This research aimed to the comparison between two methods for obtaining three-dimensional coordinates of the controls of the upper limbs of the job of the tractor operator. The methods used were based on NBR / NM / ISO 5353 - Road machines, tractors and agricultural and forestry machinery – Reference point of the seat. The first method used follows the principles recommended by the standard NBR/NM/ISO/5353 The second method is an adaptation of this standard with the introduction of a laser measuring equipment developed by Silva (2009). The results were compared statistically to evaluate differences between the methodological processes involved. In this research, data was collected thought a brand new tractor Massey Ferguson model MF 292, awarded by the dealership from Londrina. The results have shown a considerable variation between the traditional measurement process and the laser measuring. It must be considered that this variation can be used to calibrate the tractor controls positioning, therefore the tractor is not in accordance to ABNT.

Parâmetros construtivos de kirigami tridimensional de 90 graus de abertura

Origami folds and kirigami cuts merged in an oriental technique called Origamic Architecture (or 3D kirigami) that has intrinsic relationships with geometry as well as these paper arts. Despite its potential, it is not very used as a didactic resource because of the lack of parameters in its construction. There are many studies about programs development and computational language to help the design of pop-up structures, as origamic architecture is also known. However, there are few studies concerning the study of positioning the lines and creases, which is essential in the process of creating a 3D kirigami design, especially in the development of spatial perception of the figure. Limited to the 90o open type models, this article is about the establishment of some initial guidelines for design of an origamic architecture through visual elements as point, line and shape. It is presented some basic models to illustrate the constructive parameters detected as well as some models elaborated by the author, showing the viability of the guidelines established.

A criança com necessidades especiais no projeto de equoterapia da UNESP

O Projeto de Extensão Universitária “EQUOTERAPIA: uma atividade motora para o desenvolvimento de Pessoas com deficiências” tem como objetivo oferecer atividades motoras para pessoas com deficiências, promovendo o desenvolvimento dos aspectos neuropsicomotor com a utilização do cavalo. Os resultados encontrados até o momento foram: em relação a praticante do sexo feminino (6 anos) com paralisia cerebral teve como objetivo do programa controle motor, equilíbrio e interação, encontrando-se como resultados parciais: avaliação da postura – evolução de ruim para regular; melhora no posicionamento de cabeça e realinhamento do tronco; controle de tônus muscular; interação - diminuiu a insegurança e aumentou o contato tátil com o cavalo. O praticante do sexo masculino de 10 anos sem quadro clínico conclusivo teve como objetivo controle de tronco, diminuição dos reflexos patológicos, diminuição da hipotonia. Os resultados parciais apresentaram: diferenças quanto aos reflexos patológicos; controle de tronco; equilíbrio; coordenação motora; diminuição da hipotonia. A praticante do sexo feminino de 12 anos com distúrbio emocional teve como objetivo auto-confiança, auto-estima, aprendizagem, relacionamento interpessoal. Em seus resultados parciais observou-se superação da dificuldade com a fase de aproximação e montaria. O praticante do sexo masculino de 12 anos com deficiência visual objetivou em seu programa maiores interesses pelas atividades escolares e equilíbrio corporal. Foi possível analisar nos resultados parciais: melhor relacionamento com familiares; melhora no equilíbrio e coordenação motora; melhora na utilização do Braille. Pudemos assim verificar que a mudança de ambiente (casa e/ou escola – ambiente equoterápico) teve relação com a capacidade de aprendizagem dos praticantes, além disto, analisamos diferenças no comportamento motor dos praticantes, sendo observadas evoluções posturais, coordenação motora, equilíbrio. Conclui-se a importância de desenvolver o projeto de equoterapia, sendo possível aprimorar conhecimentos científicos e analisar diferentes casos.

Projeto de extensão FUTFEB

Introdução: O Projeto de Extensão FutFEB procura estimular o interesse dos alunos do ensino médio, técnico e fundamental para seguirem carreira nas áreas de engenharia e ciência da computação. Para isso são utilizados robôs móveis simples em conjunto com material didático e audiovisual para despertar de forma lúdica, através de palestras e demonstrações práticas, o interesse dos jovens para os desafios e atrativos das carreiras tecnológicas. Essas atividades são desenvolvidas por alunos do Colégio Técnico Industrial e da Faculdade de Engenharia do Campus de Bauru. Objetivos: Propiciar condições para que os alunos do Colégio Técnico Industrial e da Faculdade de Engenharia desenvolvam atividades de pesquisa e desenvolvimento sobre robôs móveis autônomos funcionando como complemento e estímulo a sua formação acadêmica nas áreas de engenharia elétrica, mecânica, e computação. Assim, espera-se a criação da cultura e de um ambiente propícios para desenvolvimento de pesquisas e de inovação tecnológica, que ajudem a consolidar os Cursos Técnicos, de Graduação e PósGraduação da FEB. Métodos: O uso de robôs móveis em cursos de engenharia ou cursos visando o desenvolvimento tecnológico não é uma novidade. Inúmeros experimentos são relatados na literatura, sendo que esta abordagem tem se tornado quase que uma obrigatoriedade nos cursos de boa qualidade [Hoopes, 2003], [Martin, 1994], [Miglino, 1998]. Um dos pilares desta nova linha de ensino tecnológico é o trabalho desenvolvido por Resnick no MIT [Kafai & Resnick, 1996] que é parte importante do conhecido Projeto LEGO Mindstorms. Esta perspectiva altera significativamente o posicionamento do estudante, dando-lhe maturidade profissional e responsabilidade. Com isso espera-se formar um profissional mais capacitado tanto no aspecto de fundamentos e conceitos técnicos, como na capacidade de empreender e inovar. Também existe a expectativa de que muitos dos trabalhos desenvolvidos sejam transformados em projetos de Iniciação Científica. Resultados: toda a tecnologia utilizada no conceito Futebol de Robôs continua sendo desenvolvida e aprimorada, diversos trabalhos científicos de ponta podem ser encontrados na literatura recente, trabalhos que abordam entre outros temas, o problema da navegação autônoma dos robôs móveis. Apresenta-se a seguir trabalhos de alunos vinculados ao Projeto de Extensão FutFEB, submetidos ao Congresso de Iniciação Científica da UNESP - 2011.- Software de Mapeamento para Navegação de Robôs Móveis Autônomos.- Sensoriamento por Infra-Vermelho para Robôs Móveis Autônomos.- Sensoriamento por Ultra-Som para Robôs Móveis Autônomos.- Segmentação de Imagens Coloridas para Reconhecimento de Objetos.- Algoritmos de Subtração de Plano de Fundo em Frames de Vídeo.

A constituição de uma questão sociocientífica em um grupo de professores: um processo polifônico de desvelamento da realidade concreta

This article presents part of a broader research and seeks to elucidate the process of setting up a Socio-scientific Issue in a group of teachers at a public school. Assuming that a Socioscientific Issue must aggregate those involved in the educational process in situations of dialogue, argumentation and construction of a positioning, we understand that the recognition of the controversy or of the legitimacy of the theme in the context at stake is crucial to achieving the desired goals. Thus, starting from subsidies from the Critical Theory of Society, we characterize the process of setting up a Socio-scientific Issue among teachers as an exercise of unveiling the concrete reality, listing problematic, controversial and open to criticism aspects of Science and Technology. Thus, the Socio-scientific Issue is listed out in the group as soon as it is established a polyphonic dialogue where all participants stand, recognize the fertility of the themefor the intendededucational context and can speak of it with propriety.

O tratamento de questões sociocientíficas na formação de futuros professores de ciências: possibilidades e desafios nas vozes dos licenciandos

The perspective STSE (Science-Technology-Society-Environment) was recently implemented in the training courses for science teachers in Brazil, and proposes greater coordination of scientific knowledge with subjective questions that constitute the science, enables discussion of the nature of science and its implications for social and environmental issues. The present work aims to contribute to training of science teachers that approximates the current demands of contemporary society. Having as theoretical reasons the implications of STSE Movement in science teaching, we bring some considerations on pedagogical practices of undergraduates in Biological Sciences held within its Supervised. Through content analysis of the speeches of undergraduates, we can identify contributions and limitations that treatment of socio-scientific issues (SSI) revealed in the process, putting to discuss some aspects that are tangent training teachers committed to a contextualized view of science and scientific training. It discusses, among them, the relationship theory and practice in supervised training of future teachers’ conceptions about the implications of the STSE perspective in science teaching and science teacher positioning ahead controversial themes.