Active cooling of low-concentrating hybrid PV/Thermal collectors

A series of measurements on the performance of solar cell string modules with low-concentrating CPC reflectors with a concentration factor C ˜ 4X have been carried out. To minimise the reduction in efficiency due to high cell temperatures, the modules were cooled. Four different way of cooling were tested:1) The thermal mass of the module was increased, 2) passive air cooling was used by introducing a small air gap between the module and the reflector, 3) the PV cells were cooled by a large cooling fin, 4) the module was actively cooled by circulating cold water on the back. The best performance was given with the actively cooled PV module which gave 2,2 times the output from a reference module while for the output from the module with a cooling fin the value was 1,8.Active cooling is also interesting due to the possibility of co-generation of thermal and electrical energy which is discussed in the paper. Simulations, based on climate data from Stockholm, latitude 59.4°N, show that there are good prospects for producing useful temperatures of the cooling fluid with only a slightly reduced performance of the electrical fraction of the PV thermal hybrid system.

Determination of Thermal and Blue Light Photochemical Hazard Protection needed by Automatic Welding filters

Recent developments in biological research, has shown that the initial maximum permissible exposure (MPE) limits for protection of workers from risks associated with artificial optical radiations were more stringent than needed. Using the most recent MPE limits for artificial optical radiation this piece of work was focused on the investigation of the level of visible light attenuation needed by automatic welding filters in case of switching failure. Results from the comparison of different exposure standards were employed in investigating the need of Vis/IR and blue light transmittance requirement for automatic welding filters. Real and arbitrary spectra were taken into consideration for the worst and best case scenarios of artificial optical radiations. An excel worksheet developed during the execution of this project took into consideration the exposure from different light sources and the precision of the spectrometer used in measuring the transmittances of a welding filter. The worksheet was developed and tested with known product properties to investigate the validity of its formulation. The conclusion drawn from this project was that attenuation in the light state will be needed for products with the darkest state shade 11 or higher. Also shown is that current welding filter protects the eye well enough even in the case of switching failure.

How to make active interactions in Japanese as a second language.

This paper analyzes Japanese language classes at Dalarna University in Sweden that are held through a web conferencing system. It discusses how students’ learning and language acquisition can be supported by making better use of the available features of using a web conferencing system for language lessons. Of particular interest is the existence of an “information gap” among students, created because of the limits posed by distance communication. Students who take Japanese courses at Dalarna University usually access classes from their home, which are located all over Sweden or even abroad. This fact can be utilized in language classes because the “information gap” can lead to interactions that are essential for language learning. In order to make use of this natural “information gap” and turn it into an opportunity for communication, our classes used a teaching method called “personalization” [Kawaguchi, 2004].  “Personalization” aims to persuade students to express their own ideas, opinions, feelings and preferences. The present analysis suggests that “personalization” in web-based language classes is a surprisingly effective teaching method. By making students explain about things at home (why they have them, what they use them for, or why they are important), students become motivated to express themselves in Japanese. This makes communication meaningful and enhances students’ interest in improving their vocabulary. Furthermore, by knowing each other, it becomes easier to create a ”supportive classroom environment” [Nuibe, 2001] in which students feel able to express themselves. The analysis suggests that that web-based education can be seen not simply as a supplement to traditional face-to face classroom education, but as a unique and effective educational platform in itself.