Jaboticaba peel for jelly preparation: an alternative technology

The peel of jaboticaba is attractive regarding its nutritional, functional and sensory aspects. However, its use for consumption is still restricted due to the need of technological development in order to obtain processed preparations for its inclusion in the human diet. The purpose of this study was to produce jelly using the peel of jaboticaba and to characterize it chemically and sensorially. Diferent formulations were prepared, all with 50% of sugar and with different proportions of peel, pulp and pectin. The formulations, which were tested for preference, were the following: F1a (80% of peel, 20% of pulp and 0.5% of pectin) and F3b (50% of peel, 50% pulp and 1.0% of pectin). These formulations showed chemical composition of 216.44 mg phenolic compounds, 148.00 mg gallic acid.100 g-1, 10.42 mg flavonoids, and 12.10 mg catechin.100 g-1, and 80% acceptability index. The peel presented higher levels of nutrients than the pulp, especially as source of fiber, carbohydrates and natural pigments. Results indicated the feasibility of technological nutritional harnessing of the jaboticaba peel in obtaining jelly. The results also indicated good sensory and nutritional characteristics, acceptability, and antioxidant properties of natural pigments.

The use of cashew apple residue as source of fiber in low fat hamburgers

The main purpose of this study was to produce hamburgers with partial substitution of the meat with cashew apple residue powder. The powder residue was obtained after the extraction of the pulp and dehydration in stove with air circulation. Three formulations of hamburgers with increasing concentration of the residue as well as a control sample were prepared. The formulated products with cashew apple residue powder presented lower humidity and proteins and 35% lipid reduction. However, there was an increase in carbohydrates and pH with the addition of the powder from the cashew apple residue. Some formulations showed an improvement of the final product yield. The total dietary fiber value was between 0 and 7.66%, with higher content of insoluble dietary fiber. The addition of up to 10.70% of the residue did not cause significant sensory changes in the flavor of the samples. The production of hamburgers with a partial substitution of cow meat with the cashew apple residue could be a feasible option since it resulted in product with high nutritional quality that is rich or have high dietary fiber content and is low in fat.

Yield of albedo flour and pectin content in the rind of yellow passion fruit

In this study, it was evaluated the influence of different shapes, sizes, and maturation stages on the yield of albedo flour and pectin content of yellow passion fruit rinds. Random samples of 40 fruits were used, and the data were compared using significance intervals at 5%. Weight, skin color, fruit size and shape, pulp yield, mesocarp thickness, amount of epicarp and mesocarp, moisture content, and pectin yield were determined. The maturation stages were defined according to measurements of the yellow color of the skin. The shape and size patterns were defined according to the length/width ratio (equatorial diameter) of fruits. It was found that the epicarp thickness was not correlated to fruit shape and size, but it was thicker in ripe fruits. The mesocarp was thiner in small ripe fruits, but it did not change with fruit shape. Pulp yield was higher in ripe fruits, and it was not influenced by shape and size of fruits. It was concluded that the content of albedo flour can account for 3.9% of the weight of processed fruits, whereas the amount of pectin powder can account for up to 0.9% of the fruit weight.

Optimization of the extraction of carrageenan from Kappaphycus alvarezii using response surface methodology

This study aims to optimize an alternative method of extraction of carrageenan without previous alkaline treatment and ethanol precipitation using Response Surface Methodology (RSM). In order to introduce an innovation in the isolation step, atomization drying was used reducing the time for obtaining dry carrageenan powder. The effects of extraction time and temperature on yield, gel strength, and viscosity were evaluated. Furthermore, the extracted material was submitted to structural analysis, by infrared spectroscopy and nuclear magnetic resonance spectroscopy (¹H-NMR), and chemical composition analysis. Results showed that the generated regression models adequately explained the data variation. Carrageenan yield and gel viscosity were influenced only by the extraction temperature. However, gel strength was influenced by both, extraction time and extraction temperature. Optimal extraction conditions were 74 ºC and 4 hours. In these conditions, the carrageenan extract properties determined by the polynomial model were 31.17%, 158.27 g.cm-2, and 29.5 cP for yield, gel strength, and viscosity, respectively, while under the experimental conditions they were 35.8 ± 4.68%, 112.50 ± 4.96 g.cm-2, and 16.01 ± 1.03 cP, respectively. The chemical composition, nuclear magnetic resonance spectroscopy, and infrared spectroscopy analyses showed that the crude carrageenan extracted is composed mainly of κ-carrageenan.

Microencapsulation of babassu coconut milk

The objective of this study was to obtain babassu coconut milk powder microencapsulated by spray drying process using gum Arabic as wall material. Coconut milk was extracted by babassu peeling, grinding (with two parts of water), and vacuum filtration. The milk was pasteurized at 85 ºC for 15 minutes and homogenized to break up the fat globules, rendering the milk a uniform consistency. A central composite rotatable design with a range of independent variables was used: inlet air temperature in the dryer (170-220 ºC) and gum Arabic concentration (10-20%, w/w) on the responses: moisture content (0.52-2.39%), hygroscopicity (6.98-9.86 g adsorbed water/100g solids), water activity (0.14-0.58), lipid oxidation (0.012-0.064 meq peroxide/kg oil), and process yield (20.33-30.19%). All variables influenced significantly the responses evaluated. Microencapsulation was optimized for maximum process yield and minimal lipid oxidation. The coconut milk powder obtained at optimum conditions was characterized in terms of morphology, particle size distribution, bulk and absolute density, porosity, and wettability.

Antioxidant activities of kombucha prepared from three different substrates and changes in content of probiotics during storage

Kombucha is a health-promoting fermented beverage worldwide. The present study compared the free-radical scavenging abilities and total reducing power (TRP) of kombucha prepared from low-cost green tea (LGTK), black tea (BTK), and tea powder (TPK). LGTK had the highest scavenging abilities against 2,2-diphenyl-1-picrylhydrazyl (DPPH), superoxide anion and hydroxyl radicals, while BTK showed the highest TRP. Changes in content of probiotics in LGTK were investigated during storage as well. The number of acetic acid bacteria decreased moderately up to 10 days of storage. The number of lactic acid bacteria (LAB) decreased significantly, and their survival rate was only 0.98% at the 8th day of storage.