Clinical primary flexor tendon repair and rehabilitation: The Bern Experience

In this chapter we present our experience with treatment of zone 2 flexor tendon repair using a six-strand repair technique combined with postoperative place-and-hold exercise. The six-strand Lim/Tsai repair technique combined with place-and-hold exercises demonstrated better digital function compared to a two-strand repair without place-and-hold exercises. Range of motion in the Lim/Tsai repair group appeared to be increased without a higher rate of ruptures but with a shorter rehabilitation period. The fact that the two groups differed in both suture techniques and rehabilitation programs made it impossible to know whether the better results in the group of Lim/Tsai were due to the six-strand repair or the place-and-hold exercises or both. Despite the obvious benefit of early active mobilization, an active motion protocol may not always be possible to apply in a substantial number of patients due to concomitant injuries, the quality of the surgical repair or patient factors (swelling, pain, limited compliance). Since August 2006 a staged rehabilitation program (“stop and go”) was introduced within our unit using early active controlled flexion (green), place-and-hold (yellow), or passive flexion exercises (red) introduced by Kleinert-Duran. Our experience using the six-strand suture repair technique and “stop and go” is outlined.

Fluid-structure interaction of an elastic pipe immersed inside a coaxial rigid pipe: a model for the Tullio phenomenon

An axisymmetric, elastic pipe is filled with an incompressible fluid and is immersed in a second, coaxial rigid pipe which contains the same fluid. A pressure pulse in the outer fluid annulus deforms the elastic pipe which invokes a fluid motion in the fluid core. It is the aim of this study to investigate streaming phenomena in the core which may originate from such a fluid-structure interaction. This work presents a numerical solver for such a configuration. It was developed in the OpenFOAM software environment and is based on the Arbitrary Lagrangian Eulerian (ALE) approach for moving meshes. The solver features a monolithic integration of the one-dimensional, coupled system between the elastic structure and the outer fluid annulus into a dynamic boundary condition for the moving surface of the fluid core. Results indicate that our configuration may serve as a mechanical model of the Tullio Phenomenon (sound-induced vertigo).

Contribution of APOBEC3G/F Activity to the Development of Low-Abundance Drug-Resistant HIV-1 variants.

Plasma drug-resistant minority HIV-1 variants (DRMV) increase the risk of virological failure to first-line NNRTI antiretroviral therapy (ART). The origin of DRMVs in ART-naive patients, however, remains unclear. In a large pan-European case-control study investigating the clinical relevance of pre-existing DRMVs using 454 pyrosequencing, the six most prevalent plasma DRMVs detected corresponded to G-to-A nucleotide mutations (V90I, V106I, V108I, E138K, M184I and M230I). Here, we evaluated if such DRMVs could have emerged from APOBEC3G/F activity. Out of 236 ART-naïve evaluated subjects, APOBEC3G/F hypermutation signatures were detected in plasma viruses of 14 (5.9%) individuals. Samples with minority E138K, M184I, and M230I mutations, but not those with V90I, V106I, or V108I were significantly associated with APOBEC3G/F activity (Fisher's p<0.005), defined as presence of >0.5% of sample sequences with an APOBEC3G/F signature. Mutations E138K, M184I and M230I co-occurred in the same sequence as APOBEC3G/F signatures in 3/9 (33%), 5/11 (45%) and 4/8 (50%) of samples, respectively; such linkage was not found for V90I, V106I or V108I. In-frame STOP codons were observed in 1.5% of all clonal sequences; 14.8% of them co-occurred with APOBEC3G/F signatures. APOBEC3G/F-associated E138K, M184I and M230I appeared within clonal sequences containing in-frame STOP codons in 2/3 (66%), 5/5 (100%) and 4/4 (100%) of the samples. In a reanalysis of the parent case-control study, presence of APOBEC3G/F signatures was not associated with virological failure. In conclusion, the contribution of APOBEC3G/F editing to the development of DRMVs is very limited and does not affect the efficacy of NNRTI ART.

Repair of Annulus fibrosus with Genipin-enhanced Fibrin Hydrogel and silk membrane- fleece

Introduction Low back pain is often caused by a trauma causing disc herniation and /or disc degeneration. Although there are some promising approaches for nucleus pulposus repair, the inner tissue of the intervertebral disc (IVD) so far no treatment or repair is available for annulus fibrosus (AF) injuries. Here we aimed to develop a new method to seal and repair AF injuries by using a silk fleece composite and a genipin enhanced hydrogel. Methods Bovine (b) IVDs were harvested under aseptic conditions and kept in free swelling conditions for 24h in high-glucose DMEM containing 5% bovine serum for equilibration (1). A circular 2mm biopsy punch (Polymed Medical Center, Switzerland) was used to form a reproducible defect in the AF. For filling the defect and keeping the silk composite in place a human-derived fibrin gel (Baxter Tisseel, Switzerland) enhanced with 4.2mg/ml of the cross linker genipin (Wako Chemicals GmbH, Germany) was used. The silk composite consists of a mesh- and a membrane side (Spintec Engineering GmbH, Germany); the membrane is facing outwards to form a seal. bIVDs were cultured in vitro for 14 days either under dynamic load in a custom-built bioreactor under physiological conditions (0.2MPa load and ±2° torsion at 0.2Hz for 8h/day) or static diurnal load of 0.2MPa (2). At the end of culture discs were checked for seal failure, disc height, metabolic activity, cell death by necrosis (LDH assay), DNA content and glycosaminoglycan content. Results Silk composite maintained its position throughout the 14 days of culture under loaded conditions. Although repaired discs performed slightly lower in cell activity, DNA and GAG content were in the range of the control. Also LDH resulted in similar values compared to control discs (Fig 1). Height loss in repaired discs was in the same range as for static diurnal loaded control samples. For dynamically loaded samples the decrease was comparable to the injured, unrepaired discs. Fig 1 LDH of repaired discs compared to control disc after 24h in free swelling conditions for equilibration and first three loading cycles. Conclusions Silk-genipin-fibrin reinforced hydrogel is a promising approach to close AF defects as tested by two degree of freedom loading. In further experiments cytocompatibility of genipin has to be investigated. References 1. Chan SC, Gantenbein-Ritter B. Preparation of intact bovine tail intervertebral discs for organ culture. J Vis Exp 2012, Feb 2;60(60):e3490. 2. Walser J, Ferguson SJ, Gantenbein-Ritter B. Design of a mechanical loading device to culture intact bovine caudal motional segments of the spine under twisting motion. In: Davies J, editors. Replacing animal models: a practical guide to creating and using biomimetic alternatives. Chichester, UK: John Wiley & Sons, Ltd.; 2012. p. 89-105. Acknowledgements This project is funded by the Gerbert Rüf Stiftung project # GRS-028/13 and the Swiss National Science Project SNF #310030_153411.

Computer Assisted Diagnosis and Treatment Planning of Femoroacetabular Impingement (FAI)

Femoroacetabular impingement (FAI) is a dynamic conflict of the hip defined by a pathological, early abutment of the proximal femur onto the acetabulum or pelvis. In the past two decades, FAI has received increasing focus in both research and clinical practice as a cause of hip pain and prearthrotic deformity. Anatomical abnormalities such as an aspherical femoral head (cam-type FAI), a focal or general overgrowth of the acetabulum (pincer-type FAI), a high riding greater or lesser trochanter (extra-articular FAI), or abnormal torsion of the femur have been identified as underlying pathomorphologies. Open and arthroscopic treatment options are available to correct the deformity and to allow impingement-free range of motion. In routine practice, diagnosis and treatment planning of FAI is based on clinical examination and conventional imaging modalities such as standard radiography, magnetic resonance arthrography (MRA), and computed tomography (CT). Modern software tools allow three-dimensional analysis of the hip joint by extracting pelvic landmarks from two-dimensional antero-posterior pelvic radiographs. An object-oriented cross-platform program (Hip2Norm) has been developed and validated to standardize pelvic rotation and tilt on conventional AP pelvis radiographs. It has been shown that Hip2Norm is an accurate, consistent, reliable and reproducible tool for the correction of selected hip parameters on conventional radiographs. In contrast to conventional imaging modalities, which provide only static visualization, novel computer assisted tools have been developed to allow the dynamic analysis of FAI pathomechanics. In this context, a validated, CT-based software package (HipMotion) has been introduced. HipMotion is based on polygonal three-dimensional models of the patient’s pelvis and femur. The software includes simulation methods for range of motion, collision detection and accurate mapping of impingement areas. A preoperative treatment plan can be created by performing a virtual resection of any mapped impingement zones both on the femoral head-neck junction, as well as the acetabular rim using the same three-dimensional models. The following book chapter provides a summarized description of current computer-assisted tools for the diagnosis and treatment planning of FAI highlighting the possibility for both static and dynamic evaluation, reliability and reproducibility, and its applicability to routine clinical use.

Printed Narrative: The Festival Books for Archduke Ernest of Austria from Brussels and Antwerp 1594

Workshop „The Narrative in Eastern and Western Art“, Graduate School of Letters, Kyoto, 2-5 December 2013 Abstract by Ivo Raband, University of Berne Printed Narrative: The Festival Books for Ernest of Austria from Brussels and Antwerp 1594 During the early modern period the medium of the festival book became increasingly more important as an object of ‘political narration’ throughout Europe. Focusing on Netherlandish examples from the sixteenth and seventeenth centuries, my talk will focus on the festival books printed for the Joyous Entries of Archduke Ernest of Austria (1553–1595). Ernest was appointed Governor General of the Netherlands by King Philipp II in 1593, being the first Habsburg Prince to reside in Brussels since 30 years. In Brussels and Antwerp, the Archduke was greeted with the traditional Blijde Imkomst, Joyous Entry, which dates back to the fourteenth century and was a necessity to actually become the sovereign of Brabant and Antwerp and to uphold the privileges of the cities. Decorated with ephemeral triumphal arches, stages, and tableaux vivants, both cities welcomed Ernest and, at the same time, demonstrated their civic self-assurance and negotiated their statuses. In honor of these events of civic power, the city magistrates commissioned festival books. These books combine a Latin text with a description of the events and the ephemeral structures, including circa 30 engravings and etchings. Being the only visual manifestation of the Joyous Entries, the books became important representational objects. The prints featured in festival books will be my point of departure for discussing the importance of narrative political prints and the concept of the early modern festival book as a ‘political object’. By comparing the prints from Ernest’s entries with others from the period between 1549 and 1635, I will show how the prints became as important as the event itself. Thus, I want to pose the question of whether it would have been possible to substitute a printed version of the event for the actual ceremony.

Twenty years' experience with the Swiss data registry for assisted reproductive medicine: outcomes, key trends and recommendations for improved practice.

QUESTIONS UNDER STUDY The impact of assisted reproductive technology (ART) on Swiss demography was quantified. From 1993 to 2012 the number of deliveries, including multiples, generated by ART was compared with overall delivery numbers. Swiss experts in ART collaborated in a consensus to increase successful outcomes, to reduce the incidence of complications of ART and to validate recommendations through statistical review of available data. METHODS Data generated between 1993 and 2012 and published by the Federal Office of Statistics (BfS) were compared with the Swiss database on ART (FIVNAT-CH) as organised by the Swiss Society of Reproductive Medicine (SGRM). From these analyses a panel of Swiss experts in ART extracted recommendations to improve current practice, to prevent complications related to ART and to recommend changes in current Swiss legislation dealing with ART. RESULTS Since 1993 the age of women giving birth rose together with the number of women asking for ART. This demographic trend was reflected in a rise in the number of deliveries generated by ART (in 2012: 2.2%) and the proportion of multiple births (in 2012: 17.6%). The outcome of ART was most negatively influenced by the age of the treated patient. The number of retrieved oocytes decisively impacted the likelihood of delivery, the risk of multiple births and the incidence of ovarian hyperstimulation syndrome. CONCLUSIONS Optimal ovarian stimulation should be designed for the retrieval of 10 to 15 oocytes per treatment. Swiss legislation should enable and stimulate a policy of elective single embryo transfer to avoid multiple births.

Long-term Outcome After Monosegmental L4/5 Stabilization for Degenerative Spondylolisthesis With the Dynesys Device.

STUDY DESIGN Retrospective analysis of prospectively collected clinical data. OBJECTIVE To assess the long-term outcome of patients with monosegmental L4/5 degenerative spondylolisthesis treated with the dynamic Dynesys device. SUMMARY OF BACKGROUND DATA The Dynesys system has been used as a semirigid, lumbar dorsal pedicular stabilization device since 1994. Good short-term results have been reported, but little is known about the long-term outcome after treatment for degenerative spondylolisthesis at the L4/5 level. METHODS A total of 39 consecutive patients with symptomatic degenerative lumbar spondylolisthesis at the L4/5 level were treated with bilateral decompression and Dynesys instrumentation. At a mean follow-up of 7.2 years (range, 5.0-11.2 y), they underwent clinical and radiographic evaluation and quality of life assessment. RESULTS At final follow-up, back pain improved in 89% and leg pain improved in 86% of patients compared with preoperative status. Eighty-three percent of patients reported global subjective improvement. Ninety-two percent would undergo the surgery again. Eight patients (21%) required further surgery because of symptomatic adjacent segment disease (6 cases), late-onset infection (1 case), and screw breakage (1 case). In 9 cases, radiologic progression of spondylolisthesis at the operated segment was found. Seventy-four percent of operated segments showed limited flexion-extension range of <4 degrees. Adjacent segment pathology, although without clinical correlation, was diagnosed at the L5/S1 (17.9%) and L3/4 (28.2%) segments. In 4 cases, asymptomatic screw loosening was observed. CONCLUSIONS Monosegmental Dynesys instrumentation of degenerative spondylolisthesis at L4/5 shows good long-term results. The rate of secondary surgeries is comparable to other dorsal instrumentation devices. Residual range of motion in the stabilized segment is reduced, and the rate of radiologic and symptomatic adjacent segment degeneration is low. Patient satisfaction is high. Dynesys stabilization of symptomatic L4/5 degenerative spondylolisthesis is a possible alternative to other stabilization devices.

Investigación en el campo del arte : Presentación de un caso y niveles de anclaje

Muchas veces en la investigación en el campo del arte los términos son ambiguos si no se los precisa. Retomamos la distinción entre cuestiones ontológicas (tipos de objetos de investigación), epistemológicas (conocimientos producidos) y metodológicas propiamente dichas (discusiones en torno de los vínculos con las Ciencias Sociales). A su vez distinguimos la investigación en el campo del arte de la investigación artística (IENA) propiamente dicha, reservando para esta última los sentidos de un tipo de indagación estética creativa en la incorporación de nuevos lenguajes y modalidades de obras. El trabajo busca ser una excusa para que, presentando una exploración en curso dentro de la casa/museo El fogón de los arrieros, podamos actualizar brevemente un debate sobre dos concepciones vinculadas: la IENA y la investigación sobre objetos artísticos. Además de arriesgar una propuesta de abordaje con matriz de datos para estratificar los niveles de análisis, dejando interrogantes para sucesivos planteos que contengan los rasgos propios de la pesquisa teórica y práctica sobre artes.