Implications of local lifecycle analyses and low carbon fuel standard design on gasohol transportation fuels

State and regional policies, such as low carbon fuel standards (LCFSs), increasingly mandate that transportation fuels be examined according to their greenhouse gas (GHG) emissions. We investigate whether such policies benefit from determining fuel carbon intensities (FCIs) locally to account for variations in fuel production and to stimulate improvements in FCI. In this study, we examine the FCI of transportation fuels on a lifecycle basis within a specific state, Minnesota, and compare the results to FCIs using national averages. Using data compiled from 18 refineries over an 11-year period, we find that ethanol production is highly variable, resulting in a 42% difference between carbon intensities. Historical data suggests that lower FCIs are possible through incremental improvements in refining efficiency and the use of biomass for processing heat. Stochastic modeling of the corn ethanol FCI shows that gains in certainty due to knowledge of specific refinery inputs are overwhelmed by uncertainty in parameters external to the refiner, including impacts of fertilization and land use change. The LCA results are incorporated into multiple policy scenarios to demonstrate the effect of policy configurations on the use of alternative fuels. These results provide a contrast between volumetric mandates and LCFSs. © 2011 Elsevier Ltd.

3D FE Analyses of Buried Pipeline with Elbows Subjected to Lateral Loading

This study investigates the interaction between soil and pipeline in sand subjected to lateral ground displacements with emphasis on the peak force exerted to a bended elbow-pipe. A series of three-dimensional (3D) finite-element (FE) analyses were performed in both opening and closing modes of the elbow section for different initial pipe bending angles. To model the mechanical behavior of sands, two soil models were adopted: Mohr-Coulomb and Nor-Sand soil model. Investigations also included the effects of pipe embedment depth and soil density. Results show that the opening mode exhibits higher ultimate forces and greater localized deformations than the closing mode. Nondimensional charts that account for pipeline location, bending angle, and soil density are developed. Soil-spring pipeline analyses of an elbow-pipe were performed using modified F-δ soil-spring models based on the 3D FE results and were compared to the findings of conventional spring model analyses using the standard two-dimensional soil-spring model. Results show that the pipe strain does not change in the closing mode case. However, in the opening mode case, the pipe strain computed by the modified analysis is larger than that by the conventional analysis and the difference is more pronounced when the pipe stiffness is stiffer. © 2011 American Society of Civil Engineers.

Market opportunity identification for minor crops for food security through value chain studies

The brochure is to contribute to the overall goal of stimulating the adaptation of pro-poor agri-food systems innovations to improve food security and sustainable natural resource management among rural poor farmers. The paper seeks to identify and exploit opportunities for expanding market access for minor crops and NRM products. The minor crops studied included cow pea, sorghum, groundnut, sweet potato and yam.

The feasibility of milkfish (Chanos chanos) aquaculture in Solomon Islands

Fish is crucial to food and nutrition security in Solomon Islands, and demand is expected to increase due to a growing population. However, it is projected that current capture fisheries production will not meet this growing demand. Aquaculture has the potential to mitigate the capture fishery shortfall, and the Government of Solomon Islands is prioritizing aquaculture as a solution to meet future food and income needs. Aquaculture in Solomon Islands is still in early development. Mozambique tilapia (Oreochromis mossambicus) is farmed for household consumption, but its prolific reproductive rate and resulting slow growth limit its potential as a commercial aquaculture species. More productive fish species that are not indigenous to Solomon Islands but are successfully farmed overseas could be introduced; however, such a decision needs to take into account the potential ecological or social impacts. For land-based pond aquaculture, the only indigenous species that has been farmed extensively elsewhere is milkfish (Chanos chanos). This report presents a feasibility assessment for milkfish farming in Solomon Islands. It synthesizes the current knowledge about milkfish farming and presents results of a 4-year study on the potential for milkfish aquaculture in Solomon Islands.

Chemical, bacteriological and sensory examination of split, dried, smoked bream on the market in Zambia

A critical examination of the market quality of split, dried and smoked bream (Tilapia spp.) was chemically, bacteriologically and organoleptically conducted for the period of August 1968 to January 1969. The aim of this survey was to obtain basic information for the development of national quality standards for the commodity. Relationships of cooked meat score to pH, fish size, appearance and smell score, and water content wcre significantly correlated and responsive. Therefore, these parameters were proposed to be used as indices for the quality standards of the products.

Analysis of competition in the wholesale and retail markets for fish in Kisumu, Kenya

This study analyses competition in the wholesale and retail fish marketing system in Kisumu, which is Kenya's largest fish market. It is based on cross sectional and time series primary data collected in a survey involving 88 retailers and 47 wholesale traders of fish in the town. Stratified random sampling method was used in selecting the respondents, Concentration ratios, Lorenz curves and Gini coefficients are derived and evaluated for both markets. They demonstrate that market shares are unequally distributed among the wholesalers and retailers. The Gini coefficients are 0.37 and 0.45 for the whole and retail markets respectively. Based on a Gini coefficient cut-off level of 0.4, it is concluded that the wholesale fish market exhibits effective competition while the retail outlet has oligopolistic tendencies. The implication of this level of competition to price efficiency is discussed. Intervention measures to enhance competition in the market are recommended.

XMolecular Cloning and Sequence Analyses of cDNAs Encoding Seven C2type Lectin2like Protein Subunits from Daboia russellii siamensis

按照Promega 公司的mRNA 提取试剂盒操作手册, 从圆斑蝰蛇( Daboia russellii siamensis ) 的毒腺中提 取mRNA ; 利用RT2PCR 的方法进行体外扩增, 获得C - 型凝集素蛋白的基因, 克隆到pMD182T 载体中。随机挑 选14 个阳性克隆进行核酸测序, 获得7 个编码不同蛇毒C - 型凝集素样蛋白亚基的cDNA , 分别命名为DRS2L1 、 DRS2L2 、DRS2L3 、DRS2L4 、DRS2L5 、DRS2L6 和DRS2L7 。由基因序列推导出的氨基酸序列表明, 克隆到的7 个蛇 毒C - 型凝集素样蛋白的亚基中均有糖识别结构域存在。BLAST 分析显示, 仅有DRS2L1 的蛋白序列与目前已知 的蛇毒C - 型凝集素样蛋白的α亚基相似。序列同源性比较并结合半胱氨酸位点分析, 推测DRS2L1 和DRS2L2 可能分别是圆斑蝰蛇毒Ⅹ因子激活剂的轻链LC2 和LC1 。DRS2L3 和DRS2L4 可能是高分子量的蛇毒C - 型凝集 素样蛋白的β亚基, 而DRS2L5 和DRS2L6 可能是低分子量的蛇毒C - 型凝集素样蛋白的β亚基。DRS2L7 可能是 类似于血小板膜糖蛋白Ib 结合蛋白的β亚基。

The practical feasibility of using RFID in a metal environment

Passive Radio Frequency Identification (RFID) has revolutionized the way in which products are identified. This paper considers the effect of metals on the performance of RFID at ultra high frequency (UHF). The paper establishes read patterns in space, highlighting the interference of RF waves due to three different metals, one ferrous and the other two non ferrous, when placed behind a transponder. The effect of thickness of the metal plate is also examined. Different metals have been found to have different interference effects although there are some similarities in their read patterns related to their material properties. Also experiments have been carried out to identify and establish various methods of improving this performance. Finally, differences between performance-measuring parameters, namely attenuating transmitted power and calculating read rate at a fixed attenuation are established and possible reasons of these observations are presented. © 2007 IEEE.

Seismic analyses of shallow tunnels by dynamic centrifuge tests and finite elements

The increments of internal forces induced in a tunnel lining during earthquakes can be assessed with several procedures at different levels of complexity. However, the substantial lack of well-documented case histories still represents a difficulty in order to validate any of the methods proposed in literature. To bridge this gap, centrifuge model tests were carried out on a circular aluminium tunnel located at two different depths in dense and loose dry sand. Each model has been instrumented for measuring soil motion and internal loads in the lining and tested under several dynamic input signals. The tests performed represented an experimental benchmark to calibrate dynamic analyses with different approaches to account for soil-tunnel kinematic interaction. © 2009 IOS Press.

Beyond niche thinking: Market selection in science-based ventures

Matching a new technology to an appropriate market is a major challenge for new technology-based firms (NTBF). Such firms are often advised to target niche-markets where the firms and their technologies can establish themselves relatively free of incumbent competition. However, technologies are diverse in nature and do not benefit from identical strategies. In contrast to many Information and Communication Technology (ICT) innovations which build on an established knowledge base for fairly specific applications, technologies based on emerging science are often generic and so have a number of markets and applications open to them, each carrying considerable technological and market uncertainty. Each of these potential markets is part of a complex and evolving ecosystem from which the venture may have to access significant complementary assets in order to create and sustain commercial value. Based on dataset and case study research on UK advanced material university spin-outs (USO), we find that, contrary to conventional wisdom, the more commercially successful ventures were targeting mainstream markets by working closely with large, established competitors during early development. While niche markets promise protection from incumbent firms, science-based innovations, such as new materials, often require the presence, and participation, of established companies in order to create value. © 2012 IEEE.

Market-pull and technology-push in manufacturing start-ups in emerging industries

Purpose - As traditional manufacturing, previously vital to the UK economy, is increasingly outsourced to lower-cost locations, policy makers seek leadership in emerging industries by encouraging innovative start-up firms to pursue competitive opportunities. Emerging industries can either be those where a technology exists but the corresponding downstream value chain is unclear, or a new technology may subvert the existing value chain to satisfy existing customer needs. Hence, this area shows evidence of both technology-push and market-pull forces. The purpose of this paper is to focus on market-pull and technology-push orientations in manufacturing ventures, specifically examining how and why this orientation shifts during the firm's formative years. Design/methodology/approach - A multiple case study approach of 25 UK start-ups in emerging industries is used to examine this seldom explored area. The authors offer two models of dynamic business-orientation in start-ups and explain the common reasons for shifts in orientation and why these two orientations do not generally co-exist during early firm development. Findings - Separate evolution paths were found for strategic orientation in manufacturing start-ups and separate reasons for them to shift in their early development. Technology-push start-ups often changed to a market-pull orientation because of new partners, new market information or shift in management priorities. In contrast, many of the start-ups beginning with a market-pull orientation shifted to a technology-push orientation because early market experiences necessitated a focus on improving processes in order to increase productivity or meet partner specifications, or meet a demand for complementary products. Originality/value - While a significant body of work exists regarding manufacturing strategy in established firms, little work has been found that investigates how manufacturing strategy emerges in start-up companies, particularly those in emerging industries. © Emerald Group Publishing Limited.

Multiply conditioned analyses of stratification in highly swirling methane/air flames

The effects of stratification on a series of highly swirling turbulent flames under globally lean conditions (φg=0.75) are investigated using a new high-spatial resolution multi-scalar dataset. This dataset features two key properties: high spatial resolution which approaches the 60 micron optical limit of the measurement system, and a wavelet oversampling methodology which significantly reduces the influence of noise. Furthermore, the very large number of realizations (30,000) acquired in the stratified cases permits statistically significant results to be obtained even after aggressive conditioning is applied. Data are doubly conditioned on equivalence ratio and the degree of stratification across the flame in each instantaneous realization. The influence of stoichiometry is limited by conditioning on the equivalence ratio at the location of peak CO mass fraction, which is shown to be a good surrogate for the location of peak heat release rate, while the stratification is quantified using a linear gradient in equivalence ratio across the instantaneous flame front. This advanced conditioning enables robust comparisons with the baseline lean premixed flame. Species mass fractions of both carbon monoxide and hydrogen are increased in temperature space under stratified conditions. Stratification is also shown to significantly increase thermal gradients, yet the derived three-dimensional flame surface density is shown to be relatively insensitive to stratification. Whilst the presence of instantaneous stratification broadens the curvature distribution relative to the premixed case, the degree of broadening is not significantly influenced by the range of global stratification ratios examined in this study. © 2012 The Combustion Institute.