Rapid on-site evaluation of fine needle aspiration specimens by cytology scientists : a review of 3032 specimens

Objectives To determine: (1) the accuracy of cytology scientists at assessing specimen adequacy by rapid on-site evaluation (ROSE) at fine needle aspiration (FNA) cytology collections; and (2) whether thyroid FNA with ROSE has lower inadequacy rates than non-attended FNAs. Methods The ROSE of adequacy for 3032 specimens from 17 anatomical sites collected over a 20-month period was compared with the final report assessment of adequacy. ROSE was performed by 19 cytology scientists. The report profile for 1545 thyroid nodules with ROSE was compared with that for 1536 consecutive non-ROSE thyroid FNAs reported by the same cytopathologists during the study period. Results ROSE was adequate in 75% (2276/3032), inadequate in 12% (366/3032) and in 13% (390/3032) no opinion was rendered. Of the 2276 cases assessed as adequate by ROSE, 2268 (99.6%) were finally reported as adequate for assessment; eight specimens had adequacy downgraded on the final report. Fifty eight per cent of cases with a ROSE assessment of inadequate were reported as adequate (212/366), whereas 93% (363/390) with no opinion rendered were reported as adequate. The overall final report adequacy rate for the 3032 specimens was 94% (2843/3032). Confirmation of a ROSE of adequacy at reporting was uniformly high amongst the 19 scientists, ranging from 98% to 100%. The inadequacy rate for thyroid FNAs with ROSE (6%) was significantly (P < 0.0001) lower than for non-ROSE thyroid FNAs (17%). A significantly (P = 0.02) higher proportion of adequate ROSE thyroid specimens was reported with abnormalities, compared with non-ROSE thyroid collections. Conclusions Cytology scientists are highly accurate at determining specimen adequacy at ROSE for a wide range of body sites. ROSE of thyroid FNAs can significantly reduce inadequate reports.

Metachronous carcinomas in colorectum and its clinicopathological significance

PURPOSE The study was designed to examine the significance of colorectal metachronous carcinoma in a large cohort of patients. METHODS Over a mean follow-up period of 10 years, the clinicopathological features, microsatellite instability (MSI) and clinical follow-up of 56 patients with metachronous colorectal carcinoma were analysed. RESULTS The prevalence of metachronous colorectal carcinoma was 2.1 %. The metachronous colorectal carcinomas appeared between 7 and 246 months (mean = 66 months) after surgical resection of the index colorectal carcinomas. Thirty-six per cent (n = 20) of the metachronous carcinoma occurred more than 5 years after the operation of the index carcinoma. Of the 56 patients, 20 % (n = 11) of the metachronous colorectal carcinomas were mucinous adenocarcinoma. Cancers detected in the secondary operations (metachronous colorectal carcinomas), when compared with the primary index cancers, were smaller, showed higher proportions of mucinous adenocarcinoma and more often located in the proximal colon. Patients with metachronous colorectal cancers had higher prevalence of mucinous adenocarcinoma, loss of staining for MSI markers and better survival rates than other patients with colorectal cancers. CONCLUSIONS Patients with metachronous colorectal carcinomas have characteristic features, and attention to these features is important for better management of this group of cancer.

Reducing bubble defect on the outsole production process in the footwear manufacturing industry

The purpose of this study is to discover the significant factors causing the bubble defect on the outsoles manufactured by the Case Company. The bubble defect occurs approximately 1.5 per cent of the time or in 36 pairs per day. To understand this problem, experimental studies are undertaken to identify various factors such as injector temperature, mould temperature; that affects the production of waste. The work presented in this paper comprises a review of the relevant literature on the Six Sigma DMAIC improvement process, quality control tools, and the design of the experiments. After the experimentation following the Six Sigma process, the results showed that the defect occurred in approximately 0.5 per cent of the products or in 12 pairs per day; this decreased the production cost from 6,120 AUD per month to 2,040 AUD per month. This research aimed to reduce the amount of waste in men’s flat outsoles. Hence, the outcome of research presented in this paper should be used as a guide for applying the appropriate process for each type of outsole.

Water heating and dehumidification with heat pump utilizing solar, ambient and waste heat

The low temperature operation of a heat pump makes it an excellent match for the use of solar energy. At the National University of Singapore, a solar assisted heat pump system has been designed, fabricated and installed to provide water heating and drying. The system also utilizes the air con waste heat, which would normally be released to atmosphere adding to global warming. Experimental results show that the twophase unglazed solar evaporator-collector, instead of losing energy to the ambient, gained a significant amount due to low operating temperature of the collector. As a result, the collector efficiency attains a value greater than 1, when conventional collector equations are used. With this evaporator-collector, the system can be operated even in the absence of solar irradiation. The waste heat was collected from an air-con system, which maintained a room at 20-22 oC. In the condenser side, water at 60 oC was produced at a rate of 3 liter/minute and the drying capacity was 2.2kg/hour. Maximum COP of the system was found to be about 5.5.

Biogas in Bangladesh : challenges and strategies

The people of Bangladesh are underprivileged from continuous grid electricity. Despite the plentiful supply of renewable sources of energy in Bangladesh, currently their contribution to the electricity supply remains inconsequential. Use of renewable energy is considered an indispensable component of sustainable energy systems, as renewable energy resources emit less greenhouse gas emissions compared to other non-renewable energy systems. Out of the various renewable sources, solar and biogas and to a limited extend, wind and hydro-power are effectively used. Though the biogas production was the leading and most appropriate renewable energy resource in our country, it has become notably insignificant due to the lack of appropriate strategies and institutional settings. To address this, this article examines Bangladesh's current energy strategies and institutional settings and investigates future strategies for the advancement of biogas production. This article argues that further significant efforts could be made toward energy sustainability in Bangladesh and the development for a national sustainable energy policy.

Sitooter-i

As part of the process of renewing its City Centre Master Plan, Brisbane City Council and its CBD are hosting an Ideas Fiesta between April 11th- 3rd May 2013. It hopes to generate new ideas, showcase design concepts, and stimulate interest in imagining the future of the city centre. Events will be held in a variety of city outdoor spaces, streets, laneways and venues to identify catalyst projects and explore design ideas for the city centre. In the City Botanic Gardens ‘Sunday reserved for you’ on 21st April and ‘A shot of green’ on Wednesday 24th April are some of the events planned and are the setting for innovative items of park furniture and other activities. A sitooterie (Scottish) is an outdoor space to sit… a place to enjoy nature. This Sitooter-i has been digitally designed for CNC fabrication with the ergonomics of reclining, lounging, just sitting or jumping around in mind. It was assembled by staff and students from Queensland University of Technology and is made from locally sourced plywood components which are easily dismantled for re-use elsewhere. But this Sitooter-i inspired by natural forms is also both physically and technologically interactive. Sensors record sound, light and temperature in their interactions with users. This data may be relayed as LED lights played in rhythm along frame edges or used by Brisbane City Council to assess frequency and style of use, perhaps revealing the effectiveness of its performance and the preferences of its users. See: http://sitooteri.wordpress.com/

What predicts mental health in midlife and older women? Results from the Australian Healthy Aging of Women Study

Objectives: Previous research has linked unhealthy lifestyle with a range of negative health outcomes in women. As women age however, they may have fewer performance expectations, but may view their health more positively. Clearly, the experiences of midlife and older women in relation to health and wellbeing need further exploration. The purpose of this study is to examine the factors associated with poor health-related quality of life in midlife (HRQoL) and older Australian women. Methods: The Australian longitudinal Healthy Aging of Women (HOW) study prospectively examines HRQoL, chronic disease and modifiable lifestyle factors midlife and older women as they age. Random sampling was used to select rural and urban based women from South-East Queensland, Australia. Data were collected from 386 women at three time points over the last decade (2001, 2004 and 2011). Results: The average age of women in this study was 65 years (SD = 2.82). Almost three-quarters (73%, n = 248) of the sample were married or living as though married, nine per cent (n = 30) were separated or divorced and a small proportion were had never married (n = 13). Most (86%, n = 291) of the women sample reported being Australian born, around one quarter (34%, n = 114) had completed additional study since leaving school (university degree or diploma). Over half (55%, n = 186) of participants were retired, one quarter (25%, n = 85) were in paid employment and the remained were unemployed (1%, n = 4), unable to work because of illness (2%, n = 6) or worked within the home (17%, n = 56). Using data collected over time we examined the relationship between a range of modifiable lifestyle factors and mental health using structural equation modelling. The overall model exhibited a good fit with the data. Poor sleep quality was associated with reduced mental health while better mental health was reported in women who exercised regularly and satisfied with their currently weight. As hypothesized, past mental health was a significant mediator of current mental health. Conclusions: These findings demonstrate that the mental health of women is complex and needs to be understood not only in terms of current lifestyle but also in relation to previously reported health status.

Little boxes : changing perceptions and including young people in socially sustainable participatory planning

In recent years, a great deal has been written about the benefits and ethics of including young people in participative decision-making. This has been accompanied by a burgeoning interest in including their views in participatory planning exercises that has not always been realised in practice. Drawing on a detailed analysis of the perceptions of adults and young people involved in a participatory planning exercise on Australia‟s Gold Coast, we believe that there are two major hurdles to the „full‟ engagement of young people that are in some respects two sides of the same coin: the sometimes paternalistic perceptions and often dismissive attitude that many adults have towards the participation of young people; and the perceptions that young people may have of themselves and their subordinate place in an adult-dominated planning environment. Together, such views act to place limitations on the participation of young people because they set up unrealistic expectations for both adult and younger participants in terms of how and why young people participate, and what this participation should „look and feel‟ like. In this paper, through the metaphor of boxes, we propose a number of issues that should be addressed when involving young people in participatory planning processes to ensure the most from their participation for all involved.

Building a community of learners within the STEM higher education classroom

Building rich and authentic learning experiences in the STEM classroom, is a challenge for many educators within Higher Education. While many Higher Education Institutions have embraced the need to transform current teaching and learning practices and include a range of online tools, this has often been met with some resistance and approaches that do not always recognise the academic who are a critical component to the success of the transformational process. Over the last decade the Internet has evolved from being a tool used by a few dedicated educators to one that is being used by the majority of educators. However, what is important is how this great resource is used in teaching and learning to allow students to build knowledge. The ability for students to construct knowledge and engage in higher order thinking skills is at the heart of educational practices, and building a community of learners has the potential to support these practices, especially within STEM education. This paper explores the relationship between students and an academic teaching in a technology rich STEM learning environment and their adoption of social community and shared tools. In particular the paper reports on the critical components that make a successful community of learners and the educational tools and approaches that were successfully used to enhance the student learning experience in a STEM classroom.

Making optimal and justifiable asset maintenance decisions

Maintenance decisions for large-scale asset systems are often beyond an asset manager's capacity to handle. The presence of a number of possibly conflicting decision criteria, the large number of possible maintenance policies, and the reality of budget constraints often produce complex problems, where the underlying trade-offs are not apparent to the asset manager. This paper presents the decision support tool "JOB" (Justification and Optimisation of Budgets), which has been designed to help asset managers of large systems assess, select, interpret and optimise the effects of their maintenance policies in the presence of limited budgets. This decision support capability is realized through an efficient, scalable backtracking- based algorithm for the optimisation of maintenance policies, while enabling the user to view a number of solutions near this optimum and explore tradeoffs with other decision criteria. To assist the asset manager in selecting between various policies, JOB also provides the capability of Multiple Criteria Decision Making. In this paper, the JOB tool is presented and its applicability for the maintenance of a complex power plant system.

Pipeline renewal decision support : a case study using LinEAR in a water pipeline network

This paper presents a case study for the application of a Linear Engineering Asset Renewal decision support software tool (LinEAR) at a water distribution network in Australia. This case study examines how the LinEAR can assist water utilities to minimise their total pipeline management cost, to make a long-term budget based on mathematically predicted expenditure, and to present calculated evidence for supporting their expenditure requirements. The outcomes from the study on pipeline renewal decision support demonstrate that LinEAR can help water utilities to improve the decision process and save renewal costs over a long-term by providing an optimum renewal schedules. This software can help organisation to accumulate technical knowledge and prediction future impact of the decision using what-if analysis.

Letter to Lady Chatterley

A letter written to Lady Chatterley, a fictional character in a novel by D H Lawrence. The topic of the letter is the influence of fictional characters on a reader's sense of self.

Minimizing the effects of overfitting and collinearity in construction cost estimation : a new hybird approach

Research problem: Overfitting and collinearity problems commonly exist in current construction cost estimation applications and obstruct researchers and practitioners in achieving better modelling results. Research objective and method: A hybrid approach of Akaike information criterion (AIC) stepwise regression and principal component regression (PCR) is proposed to help solve overfitting and collinearity problems. Utilization of this approach in linear regression is validated by comparing it with other commonly used approaches. The mean square error obtained by leave-one-out cross validation (MSELOOCV) is used in model selection in deciding predictive variables.