Essential oil composition of Aloysia triphylla (L'Herit) Britton leaves cultivated in Botucatu, São Paulo, Brazil

The family Verbenaceae comprises about 175 genera and 2300 species, distributed in tropics and subtropics, mainly in temperate zone of southern hemisphere. The lemon verbena (Aloysia triphylla (L'Herit) Britton) is a perennial, bushy plant originally from South America. The essential oil of this plant is used in pharmaceutical, cosmetic and perfumery industry. Therapeutic properties include febrifuge, sedative, stomachical, diuretic, and antispasmodic activities. The present work aimed to identify the chemical composition of essential oil of Aloysia triphylla leaves. The study was done in Lageado Experimental Farm of the Department of Plant Production-Horticulture, Agronomical Sciences College, São Paulo State University Campus of Botucatu. Leaves of lemon verbena from Medicinal and Aromatic Plant Garden, were collected in the end of winter (September/2001). The essential oil was extracted by hydrodistillation, in Clevenger apparatus. 100 g of leaves were used in each extraction. Four extractions were performed during three hours. The essential oils of the leaves were analyzed in Gas Chromatography Mass spectrometry (CG-MS, Shimadzu, QP-5000), equipped with capillary column DB-5 (30 m × 0,25 mm × 0,25 mm), split 1/35, injector for 220 C°, detector for 230 C°, dragged by gas He (1,0 mL/min), with programmed temperature for 60 C° to 240 C°, 3 C°/min. The identification of the substances was held by comparison of their mass spectra with data of the CG-MS (Nist 62 lib), literature references and retention index of Kovats. The main constituents of essential oils were geranial (29.54 %), neral (27.01 %), limonene (15.93 %), geranyl acetate (4.0 %) and geraniol (3.96 %). This species possesses high quantity of monoterpenes and low quantity of sesquiterpenes.

Composition of coriander essential oil from Brazil

Coriander (Coriandrum sativum L.) is an annual and herbaceous plant, belonging to the Apiaceae family. Native of southern Europe and western Mediterranean region, this herb is cultivated world widely. This species, rich in linalool, has potential using as source of essential oil and as a medicinal plant. It has been used as analgesic, carminative, digestive, depurative, anti-rheumatic and antispasmodic agent. Its fruits (commonly called seeds) are used for flavoring candies, in cookery, perfumery, beverage and in tobacco industry. The aim of this study was to analyze the chemical composition of the seed essential oil of this species grown in Botucatu, São Paulo, Brazil. The experiment was carried out in Lageado Experimental Farm, Department of Plant Production, Agronomical Sciences College, São Paulo State University. The fruits were harvest 108 days after sowing. The essential oils were extracted by hydro distillation, in Clevenger apparatus. 50 g of fruits were used in each extraction. Three extractions were performed during three hours. The essential oils were analyzed in Gas Chromatography Mass Spectrometer (CG-MS, Shimadzu, QP-5000), equipped with DB-5 capillary column (30 m × 0,25 mm × 0,25 mm), split 1/20, injector for 240 C°, detector for 230 C°, dragged by gas He (1,7 mL/min), with programmed temperature for 40 C° (5 min)-150 C°, 4 C°/min; 150 C°-280 C°, 8 C°/min. The identification of the compounds was made by comparison of their spectra of masses with data from CG-MS (Nist 62 lib), literature references and retention index of Kovats. The 18 most important components were identified and quantified. The main components of the oil were linalool (77.48 %), γ-terpinene (4.64 %), α-pinene (3.97 %), limonene (1.28 %), geraniol (0.64 %) and 2-decenal (0.16 %).

Bioatividade de plantas medicinais no controle de Sclerotinia isolado de Stevia rebaudiana (Bert.) Bertoni

The microorganism Sclerotinia was isolated from roots of Stevia rebaudiana (Bert.) Bertoni in plantations in the northwest of Parana and submitted to the cultivation in the presence of extracts and vegetable balsams of Tarragon (Artemisia draconculus), Thyme (Thymus vulgaris), Manjerona (Origanum majorona), Mint citrata (Mintpiperita var. citrata), Purple Basil (Ocimum basilicum L.), Andiroba (Carapa guanensis) and Copaíba (Copaifera reticulata Ducke). The first five oils were extracted by steam drags, after the drying of the vegetable in greenhouse with circulation of air at 45°C. The last two were used in natura. A suspension (100ìl) of fungus previously cultivated, was added to each plate. The results show that after 7 days of incubation the thyme oils 10ìl, purple basil 25ìl, manjerona 25ìl, mint citrata 50ìl, tarragon 50ìl were capable to inhibit the growth of Sclerotinia, while the andiroba oil only reached this result with 200ìl. The copaiba balsam, even in the concentration of 500ìl, was unable to inhibit the growth of the microorganism.

Oil wastes as unconventional substrates for rhamnolipid biosurfactant production by Pseudomonas aeruginosa LBI

Oil wastes were evaluated as alternative low-cost substrates for the production of rhamnolipids by Pseudomonas aeruginosa LBI strain. Wastes obtained from soybean, cottonseed, babassu, palm, and corn oil refinery were tested. The soybean soapstock waste was the best substrate, generating 11.7 g/L of rhamnolipids with a surface tension of 26.9 mN/m, a critical micelle concentration of 51.5 mg/L, and a production yield of 75%. The monorhamnolipid RhaC10C10 predominates when P. aeruginosa LBI was cultivated on hydrophobic substrates, whereas hydrophilic carbon sources form the dirhamnolipid Rha2C10C10 predominantly. © 2005 American Chemical Society and American Institute of Chemical Engineers.

Composição do óleo essencial de rubim (Leonurus sibiricus L. - Lamiaceae)

The essential oils are found in a great number of Lamiaceae family species, but few researches were carried out on this subject. This work had as a goal to identify the Leonurus sibiricus L. (rubim) essential oil composition. Rubim leaves and flowers in infusion are able to avoid vomit, diarrhea, and are also indicated in cold, cough, bronchitis and rheumatisms cases. In order to know what are the phytochemical compositions involved, it was used the gas chromatography techniques with mass spectrometry (GC-MS) as methodology. The results showed 70% volatility compound by trans-cariophylene, alpha-humulene and germacrene-D. Other substances like gamacadinene, beta-bourborene and alpha-copaene were found like compounds of this essential oil species.

Effects of olive oil and its minor constituents on serum lipids, oxidative stress, and energy metabolism in cardiac muscle

Recent lines of evidence suggest that the beneficial effects of olive oil are not only related to its high content of oleic acid, but also to the antioxidant potential of its polyphenols. The aim of this work was determine the effects of olive oil and its components, oleic acid and the polyphenol dihydroxyphenylethanol (DPE), on serum lipids, oxidative stress, and energy metabolism on cardiac tissue. Twenty four male Wistar rats, 200 g, were divided into the following 4 groups (n = 6): control (C), OO group that received extra-virgin olive oil (7.5 mL/kg), OA group was treated with oleic acid (3.45 mL/kg), and the DPE group that received the polyphenol DPE (7.5 mg/kg). These components were administered by gavage over 30 days, twice a week. All animals were provided with food and water ad libitum The results show that olive oil was more effective than its isolated components in improving lipid profile, elevating high-density lipoprotein, and diminishing low-density lipoprotein cholesterol concentrations. Olive oil induced decreased antioxidant Mn-superoxide dismutase activity and diminished protein carbonyl concentration, indicating that olive oil may exert direct antioxidant effect on myocardium. DPE, considered as potential antioxidant, induced elevated aerobic metabolism, triacylglycerols, and lipid hydroperoxides concentrations in cardiac muscle, indicating that long-term intake of this polyphenol may induce its undesirable pro-oxidant activity on myocardium. © 2006 NRC Canada.

Reguladores vegetais na produção de biomassa e teor de óleos essenciais em Cymbopogon citratus (DC.) Stapf, em diferentes épocas do ano

The purpose of the present research was to evaluate the effect of plant growth regulators in biomass production and essential oil yield content in lemongrass (Cymbopogon citratus (DC.) Stapf), in different seasons. The experiment was conducted on São Manuel Experimental Farm, Faculdade de Ciências Agronômicas, UNESP - Botucatu. Which plants were randomly assigned into blocks to treatments with three repetitions. The treatments consisted of GA3 (50 and 100 mg L-1); Ethrel (100 and 200 mg L-1); CCC (500 and 1000 mg L-1); Alar 85 (1000 and 2000 mg L-1); Accel (20 and 40 mg 0L-1) and control. Four applications of plant growth regulators were realized every three months. After 40 days of each foliar spray, the plants were cut to determine the fresh weight and essential oil yield. The application of plant growth regulators did not increase the biomass production, showing difference among collect periods when the major production was detected at the fourth collect (summer). The greatest essential oil yield was found at the second collect (winter). In the present study, the used concentrations of plant growth regulators did not increase biomass neither essential oil yield.

P3L-3 Viscosity measurement of Newtonian liquids using the complex reflection coefficient

This work presents the implementation of the ultrasonic shear reflectance method for viscosity measurement of Newtonian liquids using wave mode conversion from longitudinal to shear waves and vice-versa. The method is based on measuring the complex reflection coefficient (magnitude and phase) at a solid-liquid interface. Viscosity measurements were made in the range from 1 to 3.5MHz at 22.5°C for automotive oil (SAE40) and at 15°C for olive oil. Moreover, measurements of the olive oil were also conducted in the range from 15 to 30°C at 3.5MHz. The experimental results agree with those provided by a rotational viscometer. © 2006 IEEE.

Avaliação da distribuição da densidade em MDF a partir da técnica da onda de ultra-som

The goal of this research was to determine the density distribution in medium density fiberboard (MDF), manufactured with polyurethane derived from castor oil using, ultrasonic wave technique. The equipment used in this test is Steinkamp BP7 with plan and exponential transducers, both with 45 kHz frequencies, located in several zones on the plate in order to determine wave ultrasonic velocity. The Pinus caribaea and Eucalyptus grandis fiberboard were manufactured in the quality control and products development laboratory of Duratex with 500 mm long, 500 mm large, 8 and 15 mm of thickness. Three MDF for each fiber specimen and thickness were fabricated, totalizing twelve plates tested. The MDF were produced with 5% polyurethane addition, in temperature of 160°C, tension press of 53 bars and addition of moisture content of 12%. For determination of fiberboard density, samples were extracted from the same zones where the wave ultrasonic velocity was determined. In this case, DAX-Ray equipment was used. Statistical analysis shows good agreement with wave ultrasonic velocity and the density profile, validating the application of non-destructive technique in order to determine the density profile of MDF's.

Nerolidol, an antiulcer constituent from the essential oil of Baccharis dracunculifolia DC (Asteraceae)

In this study, the antiulcerogenic effect of essential oil from Baccharis dracunculifolia was evaluated using the model of acute gastric lesions induced by ethanol. The ulcerative lesion index (ULI) was significantly reduced by oral administration of the essential oil of B. dracunculifolia at doses of 50, 250 and 500 mg/kg which reduced the lesions by 42.79, 45.70 and 61.61%, respectively. The analysis of the chemical composition of the essential oil from B. dracunculifolia by GC showed that this was composed mainly of mono- and sesquiterpenes and the majority compound was nerolidol. Therefore, antiulcerogenic activity of nerolidol (50, 250 and 500 mg/kg) was investigated using ethanol-, indomethacin- and stress-induced ulcer models in rat. In the stress-induced ulcer model, a significant reduction of the ULI in animals treated with nerolidol (50, 250 and 500 mg/kg) and cimetidine (100 mg/kg) was observed, compared to the control group (p < 0.05). The percentage of inhibition of ulcer was 41.22, 51.31, 56.57 and 53.50% in groups treated with 50, 250, 500 mg/kg of nerolidol and 100 mg/kg of cimetidine (positive control), respectively. Regarding ethanol- and indomethacin-induced ulcer models, it was observed that the treatment with nerolidol (250 and 500 mg/kg) significantly reduced the ULI in comparison with the control group (p < 0.05). The dose of 50 mg/kg reduced the parameters analyzed but this was not statistically significant. In the ethanol-induced model percentage of inhibition of ulcer was 34.20, 52.63, 87.63 and 50.87% in groups treated with 50, 250, 500 mg/kg of nerolidol and 30 mg/kg of omeprazol (positive control), respectively. In indomethacin-ulcer the percentage of inhibition of ulcer was 34.69, 40.80, 51.02 and 46.93% in groups treated with 50, 250, 500 mg/kg of nerolidol and 100 mg/kg of cimetidine (positive control), respectively. The results of this study show that nerolidol displays antiulcer activity, as it significantly inhibited the formation of ulcers induced in different animal models. However, further pharmacological and toxicological investigations, to delineate the mechanism(s) of action and the toxic effects, are required to allow the use of nerolidol for the treatment of gastric ulcer. © 2007 Verlag der Zeitschrift für Naturforschung.

Preparation and characterization of castor oil-based polyurethane/poly(o- methoxyaniline) blend film

Blends made up of castor oil-based polyurethane (PU) and poly(o-methoxyaniline) (POMA) were obtained in the form of films by casting and characterized by FTIR, UV-Vis-NIR spectroscopy, and electrical conductivity measurements. Doping was carried out by immersing the films in 1.0M HCl aqueous solution. Chemical bonds between NCO group of PU and NH group of POMA were observed by means of FTIR spectra. The UV-Vis-NIR spectra indicated that the presence of the PU in the blend does not affect doping and formation of the POMA phase. The electrical conductivity research was in the range of 10-3 S/cm. © 2007 Wiley Periodicals, Inc.

Fatty acid production by four strains of Mucor hiemalis grown in plant oil and soluble carbohydrates

Four Mucor hiemalis strains (M1, M2, M3 and M4), isolated from soil at a depth of 0 - 15 cm in the Juréia-Itatins Ecology Station (JIES), in the state of São Paulo, Brazil and were evaluated for the production of γ-linolenic (GLA) and other unsaturated fatty acids. Five growth variables (temperature, pH, carbon source, nitrogen source, and vegetable oils) were studied. Liquid media containing 2% vegetable oil (palm oil, canola oil, soybean oil, sesame oil, or sunflower oil) or 2% carbohydrate (fructose, galactose, glycerol, glucose, lactose, maltose, sucrose, sorbitol or xylose) and 1% yeast extract as a nitrogen source were used. The greatest biomass production was observed with M3 and M4 strains in palm oil (91.5 g l -1) and sunflower oil (68.3 g l -1) media, respectively. Strain M4 produced greater quantities of polyunsaturated acids in medium containing glucose. The GLA production in the M4 biomass was 1,132.2 mg l -1 in glucose medium. Plant oils were inhibitors of fatty acid production by these strains. © 2007 Academic Journals.

Influence of grinding on the roundness, residual stresses and microstructure of VC131 steel analysed by varying the type of cutting fluid

This paper by R. E. Catai, E. C. Bianchi, P. R de Águia and M. C. Alves reports on the results of an analysis made of roundness errors, residual stresses, and SEM micrographs of VC131 steel. The analysis involved workpieces ground with two types of cutting fluid: synthetic cutting fluid and emulsive oil. In this study, the cutting parameters were kept constant while the type of cutting fluid was varied. The amount of cutting fluid injected in the process was also varied, aiming to identify the ideal amount required to obtain good results without causing structural damage to the workpiece. The SEM analyses of roundness errors and residual stresses revealed that, of the two cutting fluids, emulsive oil provided better tensions due to its greater lubricating power.

A Simple maxwell Based Model in Order to Represent the frequency-dependent viscosity measured by ultrasound

A previous work showed that viscosity values measured high frequency by ultrasound agreed with the values at low frequency by the rotational viscometer when conditions are met, such as relatively low frequency viscosity. However, these conditions strongly reduce the range of the measurement cell. In order to obtain a measurement range and sensitivity high frequency must used, but it causes a frequency-dependent decrease on the viscosity values. This work introduces a new simple in order to represent this frequency-dependent behavior.model is based on the Maxwell model for viscoelastic , but using a variable parameter. This parameter has physical meaning because it represents the linear behavior the apparent elasticity measured along with the viscosity by .Automotive oils SAE 90 and SAE 250 at 22.5±0.5oC viscosities at low frequency of 0.6 and 6.7 Pa.s, respectively,tested in the range of 1-5 MHz. The model was used in to fit the obtained data using an algorithm of non-linear in Matlab. By including the viscosity at low frequency an unknown fitting parameter, it is possible to extrapolate its . Relative deviations between the values measured by the and extrapolated using the model for the SAE 90 and SAE 250 oils were 5.0% and 15.7%, respectively.©2008 IEEE.