O~(5+)离子入射在金属表面形成L壳层X射线产生截面的研究

<正>迄今为止,K壳层电离的研究已取得了长足的进展。人们已对各不同入射离子轰击各种靶元素,在很大的能区范围内测量了K壳层X射线产生截面,而L壳层的实验数据则不够完善。本实验测量了

“第七届全国绿色环保肥料(农药)新技术、新产品交流会”专题报告

本次会议有27个专题报告,各具特色、异彩纷呈,突出展现了腐植酸肥料(农药)领域开发应用的最新研究和开发进展。为了让读者了解本次会议取得的成果,本栏目按会议专题报告顺序,将报告提要、报告中具有代表性的图或表、报告人简介和报告评价等内容编辑刊出。见21～45页。

大兴安岭林区火烧迹地木腐菌主要类群的初步研究

对大兴安岭林区火烧迹地的 17种主要木腐菌进行了报道 ,并就它们的生态习性和生态功能进行探讨 .通过对火烧林分和非过火林分主要木腐菌类群变化的研究 ,确定在火烧迹地森林生态系统演替过程中的先锋菌物主要有 8种 ,常见菌 4种 ,以及在寒温带针叶林生态系统中的珍稀和濒危的木腐菌 3种 ,并探讨了珍稀或濒危菌物的保护对策 .

利用GIS和RS确定长白山自然保护区森林景观分布的环境范围

在对遥感数据进行景观分类和对环境因子进行空间表达基础上 ,在地理信息系统的支持下 ,确定长白山自然保护区森林景观分布的环境 (包括年均温、年降水量、坡度和坡向 )范围 .结果表明 ,从苔原、岳桦、云冷杉到阔叶红松林 ,最适海拔高度范围依次为 1780～ 2 2 12、170 5～ 195 6、10 4 2～ 16 2 5、82 3～ 1184m ;最适温度范围分别为 - 4 .75～ - 2 .4 0℃、- 3.4 2～ - 2 .0 7℃、- 1.4 9～ 1.39℃、0 .71～ 2 .37℃ ;最适降水范围分别为 10 34～ 1110、10 14～ 10 6 0、883～ 10 17、82 4～ 92 5mm ;长白山自然保护区的森林景观主要分布在平、缓坡地上 ,并与坡向关系密切 ,苔原在各个坡向上均有分布 ,且在各个坡向上分布面积的变化不大 ;岳桦、云冷杉林、阔叶红松林、山杨白桦林主要呈现北、西北向分布 ,其次为东北、西向分布 ;落叶松林主要为东北向分布 ,其次为东和北向分布 ;疏林主要为西向分布 ,其次为西南、西北和南向分布 ;风倒区主要为西、西南、西北向分布 .

用二进小波分析方法对华北地区强震活动期的研究

利用二进小波变换对华北地区1300～1996年的强震时间序列进行了多尺度分解,并据此划分了不同的地震活动期。认为公元1300年之后,华北地区的强震存在两个平静期(1350～1450年、1700～1780年)和两个活跃期(1450～1700年、1780～1996年)。与以往华北强震的活动期划分方案进行比较,本文的结果在总体规律上与以前的研究差别不大,但在第三、第四地震活动期中活跃期起始界限的划分上比其它方法略有提前,而在平静期的划分上相对较短。文中采用32a尺度的小波分析信号进行分析,既考虑了较大尺度上地震

Effect of core structure on the fluorescence properties of hyperbranched poly(phenylene sulfide)

We functionalize the focal group of hyperbranched poly(phenylene sulfide) (HPPS) with benzyl, phenyl, and naphthyl group, respectively. DSC analysis shows that T-g of HPPS is increased from 55 to 93 degrees C by functionalization of the focal group with a conjugated naphthyl group. The fluorescence properties of the three core-functionalized HPPS' are studied under the comparison with the original HPPS.

Synthesis and characterization of magnetite dodecahedron nanostructure by hydrothermal method

Magnetite dodecahedral nanocrystals were fabricated using ethlenediamine tetraacetic acid (EDTA)-mediated hydrothermal route. Scanning electron microscopy images displayed that the products were almost dodecahedrons. The length of two different ribs were about 300 and 200 nm, respectively. X-ray diffraction patterns showed that the products were the cubic inverse spinel structure. Fourier transform infrared spectrum directly provided evidence of the EDTA bound to a specific surface of the precipitated magnetic nanocrystal.

Synthesis, characterization and assembly of BiOCl nanostructure and their photocatalytic properties

In this article, a two-dimensional (2D) nanoplate and a 3D hierarchical structure of BiOCl were synthesized through a simple sonochemical route. Compared with previous preparation methods, the 2D nanoplates can be prepared at a relatively short time (about 30 min) with low energy used. Additionally, these 2D nanoplates can easily assemble into a 3D hierarchical structure with the surfactant reagents. The obtained products were well crystallized and subsequently characterized by a range of methods, such as X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission microscopy (HRTEM), selected area electron diffraction (SAED) and Raman spectroscopy.

Hydrothermal synthesis and luminescent properties of Y2O3:Tb3+ and Gd2O3:Tb3+ microrods

One-dimensional (1D) Y2O3:Tb3+ and Gd2O3:Tb3+ microrods have been successfully prepared through a large-scale and facile hydrothermal method followed by a subsequent calcination process in N-2/H-2 mixed atmosphere. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (IR), thermogravimetric analysis (TGA), energy-dispersive X-ray spectra (EDX). scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-formed products via the hydrothermal process could transform to cubic Y2O3:Tb3+ and Gd2O3:Tb3+ with the same morphology and slight shrinking in size after a postannealing process.

Synthesis and chain-length dependent properties of monodisperse oligo(9,9-di-n-octylfluorene-2,7-vinylene)s

A series of monodisperse oligo(9,9-di-n-octylfluorene-2,7-vinylene)s (OFVs) with fluorene units up to 11 has been synthesized following a divergent approach. Chain length was found to affect not only photophysical properties but also thermal properties. Absorption and photoluminescence spectra are red-shifted with increasing chain length. The effective conjugated length has been extrapolated to be as long as 19 fluorene vinylene units, indicative of a well-conjugated system. With the number of fluorene units > 5, the oligomers exhibit nematic mesomorphism. Glass transition temperature (T-g) and clearing point temperature (T-c) increase with increasing molecular length and with those of OFV11 up to 71 and 230 degrees C, respectively. The oligomers can form uniform films by solution casting for fabrication of light-emitting diodes. With a device structure of ITO/ PEDOT:PSS/OFV11/Ca/Al, a current efficiency of 0.8 cd.A(-1) at a brightness of 1300 cd.m(-2) along with a maximum brightness of 2690 cd.m(-2) have been realized. This performance is notably superior to that of the corresponding polymer.

Polyimides derived from 3,3 '-bis(N-aminophthalimide)

A novel diamine, 3,3'-bis(N-aminophthalimide) (BAPI), was prepared from 3,3'-bis(N-phenylphthalimide). Its structure was determined via IR, H-1 NMR, N-15 NMR, elemental analysis, and single-crystal X-ray diffraction analysis. A series of homo- and copolyimides were synthesized by a conventional one-step method in p-chlorophenol. The characteristic IR absorption bands of hydrazine-based imide groups were near 1780, 1750, 1350, 1100, and 730 cm(-1). The polymers showed good solubility in polar aprotic solvents and phenols at room temperature. The temperatures of 5% weight loss (T-5%) of the polyimides ranged from 495 to 530 degrees C in air. DMTA analyses indicated that the glass-transition temperatures (Tgs) of the polyimides were in the range 371-432 degrees C. These polymers had cutoff wavelengths between 350 and 400 nm. The polyimide films of 6FDA/BAPI and 4,4'-HQPDA/BAPI were colorless; other films were pale yellow or yellow.

Fabrication of Au(111) single-crystal nanoisland-arrayed electrode ensembles by template-directed seeding growth

A new and simple approach for preparation of Au(111) single-crystal nanoisland - arrayed electrode ensembles, based on fine colloidal Au monolayer-directed seeding growth, is reported.