Rockfall monitoring by Terrestrial Laser Scanning ¿ case study of the basaltic rock face at Castellfollit de la Roca (Catalonia, Spain)

This case study deals with a rock face monitoring in urban areas using a Terrestrial Laser Scanner. The pilot study area is an almost vertical, fifty meter high cliff, on top of which the village of Castellfollit de la Roca is located. Rockfall activity is currently causing a retreat of the rock face, which may endanger the houses located at its edge. TLS datasets consist of high density 3-D point clouds acquired from five stations, nine times in a time span of 22 months (from March 2006 to January 2008). The change detection, i.e. rockfalls, was performed through a sequential comparison of datasets. Two types of mass movement were detected in the monitoring period: (a) detachment of single basaltic columns, with magnitudes below 1.5 m3 and (b) detachment of groups of columns, with magnitudes of 1.5 to 150 m3. Furthermore, the historical record revealed (c) the occurrence of slab failures with magnitudes higher than 150 m3. Displacements of a likely slab failure were measured, suggesting an apparent stationary stage. Even failures are clearly episodic, our results, together with the study of the historical record, enabled us to estimate a mean detachment of material from 46 to 91.5 m3 year¿1. The application of TLS considerably improved our understanding of rockfall phenomena in the study area.

The adaptive function of melanin-based coloration in the tawny owl (Strix aluco) ; the proximate role of the melanocortin system

Colour polymorphism is common in wild population. One of the main questioning of evolutionary biologists is to understand how different colour variants could have evolved and be maintained in fluctuating environments, a selective process that forces individuals to constantly adapt their strategies in order to survive. This issue is particularly true for traits that are genetically inherited. Natural selection erodes genotypes with lowest fitness (less adapted), reducing in turn global genetic variation within population. In this context, the study of the evolution and maintenance of melanin- based coloration is relevant since inter-individual variation in the deposition of these pigments is common in animal and plant kingdoms and is under strong genetic control. In this thesis, I focus on the specific case of the tawny owl (Strix aluco), a species displaying continuous variation in reddish pheomelanin-based coloration. Interestingly, empirical studies highlighted covariations between melanin-based coloration and important behavioural, physiological and life history traits. Recently, a genetic model pointed out the melanocortin system and their pleiotropic effects as a potential regulator of these covariations. Accordingly, this PhD thesis further investigates colour-specific behavioural, physiological, or life history strategies, while examining the proximate mechanisms underlying these reaction norms. We found that differently coloured tawny owls differently resolve fundamental trade-off between offspring number and quality (Chapter 1), light melanic individuals producing many low- quality offspring and dark, melanic ones producing few high-quality offspring. These reproductive strategies are likely to induce alternative physiological constraints. Indeed, we demonstrated that light melanic individuals produced higher levels of reactive oxygen species (ROS, Chapter 2), but also expressed higher levels of antioxidant (GSH, Chapters 2 & 3). Interestingly, we showed that light melanic breeding females could modulate their POMC prohormone levels according to the environmental conditions, while dark reddish ones produced constant levels of this prohormone {Chapter 4). Finally, we highlighted colour-specific patterns of prohormone convertase 1 (PCI) gene expression (Chapter 5), an enzyme responsible for POMC prohormone processing to ACTH and a- MSH, for instance. Altogether, these results provide strong evidence of colour-specific strategies, light and melanic tawny owls better coping with stressful and relaxed environments, respectively. Variation in melanin-based coloration is likely to be maintained by the heterogeneity of our study area and strong environmental stochasticity within and between years, these process favouring differently coloured tawny owls at different periods of time. From a proximate point of view, this PhD thesis supports the hypothesis that covariations between phenotypic traits and melanin-based coloration stems from the melanocortin system, especially the fundamental role of POMC gene expression and its processing to melanocortin peptides. - Le polymorphisme de couleur est une variation phénotypique très fréquente dans la nature. En biologie évolutive, une des problématiques clés est donc de comprendre comment différent morphes de couleur peuvent être apparus et maintenus au cours du temps dans des environnements aussi variables que les nôtres, surtout que ces fluctuations forcent ces morphes à s'adapter constamment pour assurer leur survie. Cette thématique est particulièrement réelle lorsque les variations phénotypiques sont héréditaires et donc sous forte influence génétique. La sélection naturelle a en effet le pouvoir d'éroder rapidement la variation génétique en éliminant les génotypes mal adaptés. Dans ce sens, l'étude de l'évolution, et de la maintenance de la coloration mélanique est donc tout à fait pertinente car la variation de coloration entre individus est très répandue à travers les règnes animal et végétal et sous forte influence génétique. Dans cette thèse, je me suis concentré sur le cas spécifique de la chouette hulotte (Strix aluco), une espèce présentant une variation continue dans la déposition de pigments pheomélaniques roux. De précédentes études ont déjà montré que cette variation de coloration était associée avec des variations de traits comportementaux, physiologiques ou d'histoire de vie. Récemment, une étude a souligné l'importance du système des mélanocortines et de leurs effets pléiotropes dans la régulation de ces covariations. En conséquence, cette thèse de doctoral a pour but d'étudier un peu plus les stratégies comportementales, physiologiques ou d'histoire de vie spécifiques à chaque morphe de couleur, tout en examinant un peu plus les mécanismes proximaux potentiellement à la base de ces normes de réactions. Nous constatons tout d'abord que les morphes de couleurs étaient associés à différentes stratégies dans la résolution de compromis telle que la production de beaucoup de jeunes ou des jeunes de qualité (Chapitre 1). Les morphes gris (dit peu mélaniques) ont tendance à produire beaucoup de jeunes mains de moindre qualité, alors que les morphes roux (dit fortement mélaniques) produisent moins de jeunes mais de meilleure qualité. Ces stratégies sont susceptibles alors d'induire certaines contraintes physiologiques. Par exemple, nous montrons que les morphes gris produisent plus de dérivés réactifs de l'oxygène (ROS, Chapitre 2), mais aussi plus d'antioxydants (GSH, Chapitres 2 & 3). Nous montrons ensuite que les femelles grises ont une plus grande capacité à moduler leur niveau de POMC prohormone dans le sang en fonction des conditions environnementales, alors que les femelles rousses gardent un niveau constant (Chapitre 4). Finalement, nous démontrons que les patterns d'expression du gène codant pour la prohormone convertase 1 varient chez des jeunes issus de parents gris ou roux (Chapitre 5). Ceci est particulièrement intéressant car cette enzyme permet de scinder la POMC prohormone en plusieurs peptides importants tels que l'ACTH ou l'a-MSH. En conclusion, ces résultats démontrent qu'il y a bel et bien des stratégies évolutives différentes entre les morphes de couleurs, les chouettes hulottes grises et rousses étant respectivement plus adaptés à des environnements stressants ou favorables. L'hétérogénéité de notre zone d'étude et la stochasticité environnementale qui caractérise ses habitats pourraient donc agir comme une source de sélection temporelle, laquelle favoriserait les différents morphes de couleurs à diverses périodes. D'un point de vue plus proximale maintenant, cette thèse de doctorat soutient l'hypothèse que les covariations observées entre la coloration mélanique et des traits phénotypiques importants sont modulées par les effets pléiotropes du système des mélanocortines, et met en avant le rôle prépondérant que pourrait jouer l'expression du gène POMC et sa post traduction en mélanocortines.

Angiotensin II-mediated adaptive and maladaptive remodeling of cardiomyocyte excitation-contraction coupling.

Cardiac hypertrophy is associated with alterations in cardiomyocyte excitation-contraction coupling (ECC) and Ca(2+) handling. Chronic elevation of plasma angiotensin II (Ang II) is a major determinant in the pathogenesis of cardiac hypertrophy and congestive heart failure. However, the molecular mechanisms by which the direct actions of Ang II on cardiomyocytes contribute to ECC remodeling are not precisely known. This question was addressed using cardiac myocytes isolated from transgenic (TG1306/1R [TG]) mice exhibiting cardiac specific overexpression of angiotensinogen, which develop Ang II-mediated cardiac hypertrophy in the absence of hemodynamic overload. Electrophysiological techniques, photolysis of caged Ca(2+) and confocal Ca(2+) imaging were used to examine ECC remodeling at early ( approximately 20 weeks of age) and late ( approximately 60 weeks of age) time points during the development of cardiac dysfunction. In young TG mice, increased cardiac Ang II levels induced a hypertrophic response in cardiomyocyte, which was accompanied by an adaptive change of Ca(2+) signaling, specifically an upregulation of the Na(+)/Ca(2+) exchanger-mediated Ca(2+) transport. In contrast, maladaptation was evident in older TG mice, as suggested by reduced sarcoplasmic reticulum Ca(2+) content resulting from a shift in the ratio of plasmalemmal Ca(2+) removal and sarcoplasmic reticulum Ca(2+) uptake. This was associated with a conserved ECC gain, consistent with a state of hypersensitivity in Ca(2+)-induced Ca(2+) release. Together, our data suggest that chronic elevation of cardiac Ang II levels significantly alters cardiomyocyte ECC in the long term, and thereby contractility, independently of hemodynamic overload and arterial hypertension.

Mechanism of HFR1 function in adaptive growth responses in "Arabidopsis thaliana"

AbstractPlants are sessile organisms, which have evolved an astonishing ability to sense changes in their environment. Depending on the surrounding conditions, such as changes in light and temperature, plants modulate the activity of important transcriptional regulators. The shade avoidance syndrome (SAS) is one important mechanism for shade-intolerant plants to adapt their growth in high vegetative density. In shaded conditions plants sense a diminished red/far-red ratio via the phytochrome system and respond with morphological changes such as elongation growth of stems and petioles. The Phytochrome Interacting Factors 4 and 5 (PIF4 and PIF5) are positive regulators of the SAS and required for a full response (Lorrain et al, 2008). They regulate the SAS by inducing the expression of shade avoidance marker genes such as PIL1, ATHB2, XTR7 and HFR1 (Hornitschek et al, 2009; Lorrain et al, 2008).I investigated the molecular mechanism underlying the regulation of the SAS by HFR1 (long Hypocotyl in FR light). Although HFR1 is a PIF-related bHLH transcription factor, we discovered that HFR1 is a non-DNA binding protein. Moreover, we revealed that HFR1 inhibits an exaggerated SAS by forming non-DNA binding heterodimers with PIF4 and PIF5 (Hornitschek et al, 2009). This negative feedback loop is an important mechanism to limit elongation growth also in elevated temperatures. HFR1 accumulation and activity are highly temperature-dependent and the increased activity of HFR1 at warmer temperatures also provides an important restraint on PIF4-driven elongation growth (Foreman et al, 2011).Finally we performed a genome-wide analysis to determine how PIF4 and PIF5 regulate growth in response to shade. We identified potential PIF5- target genes, which represent many well-known shade-responsive genes. Our analysis of gene expression also revealed a role of PIF4 and PIF5 in simulated sun possibly via the regulation of auxin sensitivity.RésuméLes plantes sont des organismes sessiles ayant développé une capacité surprenante à détecter des changements dans leur environnement. En fonction des conditions extérieures, telles que les variations de lumière ou de température, elles adaptent l'activité d'importants régulateurs transcriptionnels. Le syndrome d'évitement de l'ombre (SAS), est un mécanisme important pour les plantes intolérantes à l'ombre leur permettant d'adapter leur croissance lorsqu'elles se développent dans des conditions de végétations très denses. Dans ces conditions, les plantes détectent une réduction de la quantité relative de lumière rouge par rapport à la lumière rouge-lointain (rapport R/FR). Ce changement, perçu via le système des phytochromes, induit des modifications morphologiques telle qu'une élongation des tiges et des pétioles. Les protéines PIF4 et PIF5 (Phytochrome Interacting Factors) sont des régulateurs positifs du SAS et sont nécessaires pour une réponse complète (Lorrain et al, 2008). Ces facteurs de transcription régulent le SAS en induisant l'expression de gènes marqueurs de cette réponse tels que PIL1, ATHB2, XTR7 et HFR1 (Hornitschek et al, 2009; Lorrain et al, 2008).J'ai étudié les mécanismes moléculaires sous-jacents à la régulation du SAS par HFR1 (long Hypocotyl in FR light). HFR1 est un facteur de transcription type bHLH de la famille des PIF, quoique nous ayons découvert que HFR1 est une protéine ne se liant pas à Γ ADN. Nous avons montré que HFR1 inhibe un SAS exagéré en formant des heterodimères avec PIF4 et PIF5 (Hornitschek et al, 2009). Nous avons également montré que cette boucle de régulation négative est également un mécanisme important pour limiter la croissance de l'élongation dans des conditions de fortes températures. De plus l'accumulation et l'activité de HFR1 augmentent avec la température ce qui permet d'inhiber plus fortement l'effet activateur de PIF4 sur la croissance.Enfin, nous avons effectué une analyse génomique à large échelle afin de déterminer comment PIF4 et PIF5 régulent la croissance en réponse à l'ombre. Nous avons identifié les gènes cibles potentiels de PIF5, correspondant en partie à des gènes connus dans la réponse de l'évitement de l'ombre. Notre analyse de l'expression des gènes a également révélé un rôle important de PIF4 et PIF5 dans des conditions de croissance en plein soleil, probablement via la régulation de la sensibilité à l'auxine.

Examination of Heterogeneous Crossing Sequences Between Toner and Rollerball Pen Strokes by Digital Microscopy and 3-D Laser Profilometry

The determination of line crossing sequences between rollerball pens and laser printers presents difficulties that may not be overcome using traditional techniques. This research aimed to study the potential of digital microscopy and 3-D laser profilometry to determine line crossing sequences between a toner and an aqueous ink line. Different paper types, rollerball pens, and writing pressure were tested. Correct opinions of the sequence were given for all case scenarios, using both techniques. When the toner was printed before the ink, a light reflection was observed in all crossing specimens, while this was never observed in the other sequence types. The 3-D laser profilometry, more time-consuming, presented the main advantage of providing quantitative results. The findings confirm the potential of the 3-D laser profilometry and demonstrate the efficiency of digital microscopy as a new technique for determining the sequence of line crossings involving rollerball pen ink and toner. With the mass marketing of laser printers and the popularity of rollerball pens, the determination of line crossing sequences between such instruments is encountered by forensic document examiners. This type of crossing presents difficulties with optical microscopic line crossing techniques involving ballpoint pens or gel pens and toner (1-4). Indeed, the rollerball's aqueous ink penetrates through the toner and is absorbed by the fibers of the paper, leaving the examiner with the impression that the toner is above the ink even when it is not (5). Novotny and Westwood (3) investigated the possibility of determining aqueous ink and toner crossing sequences by microscopic observation of the intersection before and after toner removal. A major disadvantage of their study resides in destruction of the sample by scraping off the toner line to see what was underneath. The aim of this research was to investigate the ways to overcome these difficulties through digital microscopy and three-dimensional (3-D) laser profilometry. The former was used as a technique for the determination of sequences between gel pen and toner printing strokes, but provided less conclusive results than that of an optical stereomicroscope (4). 3-D laser profilometry, which allows one to observe and measure the topography of a surface, has been the subject of a number of recent studies in this area. Berx and De Kinder (6) and Schirripa Spagnolo (7,8) have tested the application of laser profilometry to determine the sequence of intersections of several lines. The results obtained in these studies overcome disadvantages of other methods applied in this area, such as scanning electron microscope or the atomic force microscope. The main advantages of 3-D laser profilometry include the ease of implementation of the technique and its nondestructive nature, which does not require sample preparation (8-10). Moreover, the technique is reproducible and presents a high degree of freedom in the vertical axes (up to 1000 μm). However, when the paper surface presents a given roughness, if the pen impressions alter the paper with a depth similar to the roughness of medium, the results are not always conclusive (8). It becomes difficult in this case to distinguish which characteristics can be imputed to the pen impressions or the quality of the paper surface. This important limitation is assessed by testing different types of paper of variable quality (of different grammage and finishing) and the writing pressure. The authors will therefore assess the limits of 3-D laser profilometry technique and determine whether the method can overcome such constraints. Second, the authors will investigate the use of digital microscopy because it presents a number of advantages: it is efficient, user-friendly, and provides an objective evaluation and interpretation.

Adaptive statistical iterative reconstruction reduces patient radiation dose in neuroradiology CT studies.

INTRODUCTION: Adaptive statistical iterative reconstruction (ASIR) can decrease image noise, thereby generating CT images of comparable diagnostic quality with less radiation. The purpose of this study is to quantify the effect of systematic use of ASIR versus filtered back projection (FBP) for neuroradiology CT protocols on patients' radiation dose and image quality. METHODS: We evaluated the effect of ASIR on six types of neuroradiologic CT studies: adult and pediatric unenhanced head CT, adult cervical spine CT, adult cervical and intracranial CT angiography, adult soft tissue neck CT with contrast, and adult lumbar spine CT. For each type of CT study, two groups of 100 consecutive studies were retrospectively reviewed: 100 studies performed with FBP and 100 studies performed with ASIR/FBP blending factor of 40 %/60 % with appropriate noise indices. The weighted volume CT dose index (CTDIvol), dose-length product (DLP) and noise were recorded. Each study was also reviewed for image quality by two reviewers. Continuous and categorical variables were compared by t test and free permutation test, respectively. RESULTS: For adult unenhanced brain CT, CT cervical myelography, cervical and intracranial CT angiography and lumbar spine CT both CTDIvol and DLP were lowered by up to 10.9 % (p < 0.001), 17.9 % (p = 0.005), 20.9 % (p < 0.001), and 21.7 % (p = 0.001), respectively, by using ASIR compared with FBP alone. Image quality and noise were similar for both FBP and ASIR. CONCLUSION: We recommend routine use of iterative reconstruction for neuroradiology CT examinations because this approach affords a significant dose reduction while preserving image quality.

Active Contour-Based Segmentation of Head and Neck with Adaptive Atlas Selection

This paper presents automated segmentation of structuresin the Head and Neck (H\&N) region, using an activecontour-based joint registration and segmentation model.A new atlas selection strategy is also used. Segmentationis performed based on the dense deformation fieldcomputed from the registration of selected structures inthe atlas image that have distinct boundaries, onto thepatient's image. This approach results in robustsegmentation of the structures of interest, even in thepresence of tumors, or anatomical differences between theatlas and the patient image. For each patient, an atlasimage is selected from the available atlas-database,based on the similarity metric value, computed afterperforming an affine registration between each image inthe atlas-database and the patient's image. Unlike manyof the previous approaches in the literature, thesimilarity metric is not computed over the entire imageregion; rather, it is computed only in the regions ofsoft tissue structures to be segmented. Qualitative andquantitative evaluation of the results is presented.

Non-contact microdrilling of mouse zona pellucida with an objective-delivered 1.48-microns diode laser.

BACKGROUND and OBJECTIVE: A non-touch laser-induced microdrilling procedure is studied on mouse zona pellucida (ZP). STUDY DESIGN/MATERIALS and METHODS: A 1.48-microns diode laser beam is focused in a 8-microns spot through a 45x objective of an inverted microscope. Mouse zygotes, suspended in a culture medium, are microdrilled by exposing their ZP to a short laser irradiation and allowed to develop in vitro. RESULTS: Various sharp-edged holes can be generated in the ZP with a single laser irradiation. Sizes can be varied by changing irradiation time (3-100 ms) or laser power (22-55 mW). Drilled zygotes present no signs of thermal damage under light and scanning electron microscopy and develop as expected in vitro, except for a distinct eight-shaped hatching behavior. CONCLUSION: The microdrilling procedure can generate standardized holes in mouse ZP, without any visible side effects. The hole formation can be explained by a local photothermolysis of the protein matrix.

Traitement au laser des trous maculaires [Laser treatment of macular holes]

OBJECTIVE: To study a new technic of laser treatment of macular holes. METHODS: 21 eyes with stage II-IV macular hole were treated with Argon-green laser. Pigment epithelium in the area of the hole was whitened with spots of 100-200 microns, 100-300 mW. We expected this treatment to create a cellular proliferation that could close and contract the hole. Follow-up after treatment ranged from 3 to 24 months (mean: 9.3 months). RESULTS: Within one month after treatment, the macular hole was closed in 7 eyes (33%) and partially closed in 5 eyes (24%). The visual acuity increased from 1 to 5 lignes (ETDRS chart) in 9 eyes (43%), it remained the same in 9 eyes (43%) and decreased from 1 to 2 lignes in 3 eyes (14%). CONCLUSION: Laser treatment of macular holes seems to be effective and could be proposed as an alternative to the patients who cannot be operated on by vitrectomy and gas tamponade.

Correlation of the Roughometer to the High-Speed Laser Profiler, MLR-97-7, 1997

The Iowa Department of Transportation has been using the Bureau of Public Roads (BPR) Roughometer as part of its detour analysis process for more than 20 years. Advances in technology have made the BPR Roughometer obsolete for ride quality testing. High-speed profilers that can collect the profile of the road at highway speeds are the standard ride instruments for determining ride quality on pavements. The objective of the project was to develop a correlation between the BPR Roughometer and the high-speed laser South Dakota type Profiler (SD Profiler). Nineteen pavement sections were chosen to represent the range of types and conditions for detours. Three computer simulation models were tested on the profiler profiles. The first model is the International Ride Index (IRI) which is considered the standard index for reporting ride quality in the United States. The second model is the Ride Number (RN) developed by the University of Michigan Transportation Research Institute and the third model used is a quarter-car simulation of the BPR Roughometer (ASTM E-1170) which should match the speed and range of roadway features experienced by Iowa's BPR Roughometer Unit. The BPR Roughometer quarter-car model provided the best overall correlation with Iowa's BPR Roughometer.

Insights from insects about adaptive social information use.

Copying others can greatly improve individual fitness and is fundamental for the organisation of societies. Yet in some situations it is better to ignore social information and either explore the world individually or use personal information obtained through prior experience. Insects provide excellent models to study the strategic use of social information, but insights from recent research have rarely been viewed in the light of social learning strategies. Here we discuss how insects tailor their reliance on social information to those circumstances for which it is most beneficial, and suggest that insects and vertebrates use similar information-use strategies. We highlight future research avenues, including the use of molecular tools to study the genetic and genomic basis of social information use.

Aplicaciones del laser de baja potencia en odontologia

La utilización de la tecnología láser en Odontología ha tenido una constante evolución y desarrollo. Con este trabajo se pretende hacer una actualización desde un punto de vista crítico, científico y objetivo de los avances y aplicaciones que se han publicado sobre el láser de baja potencia en el ámbito de cada una de las especialidades odontológicas. Asimismo, se exponen sus características, las normas de seguridad necesarias para su utilización, sus efectos secundarios y sus contraindicaciones.

Aplicaciones del laser de diodo en odontologia

El láser de diodo tiene numerosas aplicaciones en la especialidad de Cirugía Bucal siendo utilizado preferentemente para realizar intervenciones quirúrgicas sobre los tejidos blandos siempre que no impliquen un excesivo sangrado. En Endodoncia, Implantología Bucofacial y Periodoncia se emplea por su importante efecto bactericida. También se utiliza en procedimientos de blanqueamiento dentario. Es importante controlar adecuadamente el tiempo de aplicación y la potencia de trabajo para evitar el sobrecalentamiento de los tejidos vecinos, lo que produciría su necrosis. Siempre que se utilice el láser de diodo se debe efectuar la protección ocular recomendada tanto para el profesional, sus ayudantes y personal auxiliar, como para el paciente.

Aplicaciones del laser de CO2 en odontologia

La incorporación de las nuevas tecnologías en las ciencias de la salud es, hoy en día, una realidad, ante la cual los profesionales sanitarios deben estar preparados. La tecnología láser ofrece numerosas ventajas en casi la totalidad de las especialidades odontológicas. De la amplia gama de láseres disponibles, el láser de CO2 destaca por sus aplicaciones en el ámbito de la cirugía bucal, especialmente en la cirugía de los tejidos blandos, aunque su uso también ha sido estudiado en otras disciplinas como la odontología conservadora y la endodoncia. Su uso no está exento de riesgos, y el odontólogo especializado en cirugía bucal debe poseer los conocimientos y las habilidades pertinentes para su utilización. Las características del láser de CO2 permiten una cirugía rápida y cómoda para el profesional y unas molestias postoperatorias mínimas para el paciente.