QCD sum rules calculation of heavy Λ semileptonic decay

We set up sum rules for heavy lambda decays in a full QCD calculation which in the heavy quark mass limit incorporates the symmetries of heavy quark effective theory. For the semileptonic Λc decay we obtain a reasonable agreement with experiment. For the Λb semileptonic decay we find at the zero recoil point a violation of the heavy quark symmetry of about 20%. © 1998 Published by Elsevier Science B.V. All rights reserved.

Heavy λ semileptonic decay: A QCD sum rule approach

In this work we calculate the form factors of the Lambda(c) and Lambda(b) semileptonic decay using the QCD sum rules approach. We found that the form factors sum rules are more stable than the respective mass sum rules, and we get a decay rate for Lambda(c) compatible with experiment.

Optimized delta expansion for relativistic nuclear models

The optimized delta-expansion is a nonperturbative approach for field theoretic models which combines the techniques of perturbation theory and the variational principle. This technique is discussed in the lambda phi(4) model and then implemented in the Walecka model for the equation of state of nuclear matter. The results obtained with the delta expansion are compared with those obtained with the traditional mean field, relativistic Hartree and Hartree-Fock approximations.

Biology and oncogenicity of the Kaposi sarcoma herpesvirus K1 protein

The Kaposi sarcoma-associated herpesvirus (KSHV), or human herpesvirus 8, is a gammaherpesvirus etiologically linked to the development of Kaposi sarcoma, primary effusion lymphomas, and multicentric Castleman disease in humans. KSHV is unique among other human herpesviruses because of the elevated number of viral products that mimic human cellular proteins, such as a viral cyclin, a viral G protein-coupled receptor, anti-apoptotic proteins (e.g. v-bcl2 and v-FLIP), viral interferon regulatory factors, and CC chemokine viral homologues. Several KSHV products have oncogenic properties, including the transmembrane K1 glycoprotein. KSHV K1 is encoded in the viral ORFK1, which is the most variable portion of the viral genome, commonly used to discriminate among viral genotypes. The extracellular region of K1 has homology with the light chain of lambda immunoglobulin, and its cytoplasmic region contains an immunoreceptor tyrosine-based activation motif (ITAM). KSHV K1 ITAM activates several intracellular signaling pathways, notably PI3K/AKT. Consequently, K1 expression inhibits proapoptotic proteins and increases the life-span of KSHV-infected cells. Another remarkable effect of K1 activity is the production of inflammatory cytokines and proangiogenic factors, such as vascular endothelial growth factor. KSHV K1 immortalizes primary human endothelial cells and transforms rodent fibroblasts in vitro; moreover, K1 induces tumors in vivo in transgenic mice expressing this viral protein. This review aims to consolidate and discuss the current knowledge on this intriguing KSHV protein, focusing on activities of K1 that can contribute to the pathogenesis of KSHV-associated human cancers. Copyright © 2015 John Wiley & Sons, Ltd.

Analysis of experimental tendinitis in rats treated with laser and platelet-rich plasma therapies by Raman spectroscopy and histometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A first-derivative spectrophotometric method for the determination of ciprofloxacin hydrochloride in ophthalmic solution

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tecnologias de aplicação de produtos fitossanitários no controle de percevejos pragas na cultura da soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Luminous efficiency enhancement of PVK based OLEDs with fac-[ClRe(CO)(3)(bpy)]

The luminous efficiency of organic light-emitting diodes based on poly(N-vinylcarbazole), PVK, was improved by adding fac-[ClRe(CO)(3)(bpy)], bpy = 2,2`-bipyridine, to PVK host. Emissive layers with various Re(I) complex/host ratio were employed and optoelectronic properties were compared with the single PVK device. The single PVK device exhibits a characteristic electroluminescence with blue emission, lambda(max) 420 nm, assigned to the PVK excimer. On the other hand, the intense and broad band at lambda(max) 580 nm of the Re(I) complex/PVK OLEDs is ascribed to the metal-to-ligand charge transfer excited state emission of fac-[ClRe(CO)(3)(bpy)]. At 30 V, the device luminous efficiency increased from 16 mcd/A for the single PVK device to 211 mcd/A for the 11% (w/w) Re(I) complex/PVK OLED, in which fac-[ClRe(CO)(3)(bpy)] acts as an electron-trap in PVK films. The device current is space-charge limited and exhibits typical emissive layer thickness dependence. (C) 2011 Elsevier B.V. All rights reserved.

A simple criterion to predict the glass forming ability of metallic alloys

A new and simple criterion with which to quantitatively predict the glass forming ability (GFA) of metallic alloys is proposed. It was found that the critical cooling rate for glass formation (R-C) correlates well with a proper combination of two factors, the minimum topological instability (lambda(min)) and the Delta h parameter, which depends on the average work function difference (Delta phi) and the average electron density difference (Delta n(ws)(1/3)) among the constituent elements of the alloy. A correlation coefficient (R-2) of 0.76 was found between R-c and the new criterion for 68 alloys in 30 different metallic systems. The new criterion and the Uhlmann's approach were used to estimate the critical amorphous thickness (Z(C)) of alloys in the Cu-Zr system. The new criterion underestimated R-C in the Cu-Zr system, producing predicted Z(C) values larger than those observed experimentally. However, when considering a scale factor, a remarkable similarity was observed between the predicted and the experimental behavior of the GFA in the binary Cu-Zr. When using the same scale factor and performing the calculation for the ternary Zr-Cu-Al, good agreement was found between the predicted and the actual best GFA region, as well as between the expected and the observed critical amorphous thickness. (C) 2012 American Institute of Physics. [doi:10.1063/1.3676196]

Reducing the parameter space for unparticle-inspired models using white dwarf masses

Based on astrophysical constraints derived from Chandrasekhar's mass limit for white dwarfs, we study the effects of the model on the parameters of unparticle-inspired gravity, on scales Lambda(U) > 1 TeV and d(U) approximate to 1.

J/psi Polarization in pp Collisions at root s=7 TeV

The ALICE Collaboration has studied J/psi production in pp collisions at root s = 7 TeV at the LHC through its muon pair decay. The polar and azimuthal angle distributions of the decay muons were measured, and results on the J/psi polarization parameters lambda(theta) and lambda(phi) were obtained. The study was performed in the kinematic region 2: 5 < y < 4, 2 < p(t) < 8 GeV/c, in the helicity and Collins-Soper reference frames. In both frames, the polarization parameters are compatible with zero, within uncertainties.

Strangeness Enhancement in Cu-Cu and Au-Au Collisions at root s(NN)=200 GeV

We report new STAR measurements of midrapidity yields for the Lambda, (Lambda) over bar, K-S(0), Xi(-), (Xi) over bar (+), Omega(-), (Omega) over bar (+) particles in Cu + Cu collisions at root s(NN) = 200 GeV, and midrapidity yields for the Lambda, (Lambda) over bar, K-S(0) particles in Au + Au at root s(NN) = 200 GeV. We show that, at a given number of participating nucleons, the production of strange hadrons is higher in Cu + Cu collisions than in Au + Au collisions at the same center-of-mass energy. We find that aspects of the enhancement factors for all particles can be described by a parametrization based on the fraction of participants that undergo multiple collisions.

Population divergence of Melipona scutellaris (Hymenoptera: Meliponina) in two restricted areas in Bahia, Brazil

Melipona scutellaris Latreille has great economic and ecological importance, especially because it is a pollinator of native plant species. Despite the importance of this species, there is little information about the conservation status of their populations. The objective of this study was to assess the diversity in populations of M. scutellaris coming from a Semideciduous Forest Fragment and an Atlantic Forest Fragment in the Northeast Brazil, through geometric morphometric analysis of wings in worker bees. In each area, worker bees were collected from 10 colonies, 10 workers per colony. To assess the diversity on the right wings of worker bees, 15 landmarks were plotted and the measures were used in analysis of variance and multivariate analysis, principal component analysis, discriminant analysis and clustering analysis. There were significant differences in the shape of the wing venation patterns between colonies of two sites (Wilk's lambda = 0.000006; p < 0.000001), which is probably due to the geographical distance between places of origin which impedes the gene flow between them. It indicates that inter and intrapopulation morphometric variability exists (p < 0.000001) in M. scutellaris coming from two different biomes, revealing the existence of diversity in these populations, which is necessary for the conservation of this bee species.

Modeling the growth rate and lag time of different strains of Salmonella enterica and Listeria monocytogenes in ready-to-eat lettuce

The growth parameters (growth rate, mu and lag time, lambda) of three different strains each of Salmonella enterica and Listeria monocytogenes in minimally processed lettuce (MPL) and their changes as a function of temperature were modeled. MPL were packed under modified atmosphere (5% O-2, 15% CO2 and 80% N-2), stored at 7-30 degrees C and samples collected at different time intervals were enumerated for S. enterica and L monocytogenes. Growth curves and equations describing the relationship between mu and lambda as a function of temperature were constructed using the DMFit Excel add-in and through linear regression, respectively. The predicted growth parameters for the pathogens observed in this study were compared to ComBase, Pathogen modeling program (PMP) and data from the literature. High R-2 values (0.97 and 0.93) were observed for average growth curves of different strains of pathogens grown on MPL Secondary models of mu and lambda for both pathogens followed a linear trend with high R2 values (>0.90). Root mean square error (RMSE) showed that the models obtained are accurate and suitable for modeling the growth of S. enterica and L monocytogenes in MP lettuce. The current study provides growth models for these foodborne pathogens that can be used in microbial risk assessment. (C) 2011 Elsevier Ltd. All rights reserved.

Influence of the type of phospholipid head and of the conformation of the polyelectrolyte on the growth of calcium carbonate thin films on LB/LbL matrices

Calcium carbonate is one of the most important biominerals, and it is the main constituent of pearls, seashells, and teeth. The in vitro crystallization of calcium carbonate using different organic matrices as templates has been reported. In this work, the growth of calcium carbonate thin films on special organic matrices consisting of layer-by-layer (LbL) polyelectrolyte films deposited on a pre-formed phospholipid Langmuir-Blodgett (LB) film has been studied. Two types of randomly coiled polyelectrolytes have been used: lambda-carrageenan and poly(acrylic acid). A precoating comprised of LB films has been prepared by employing a negatively charged phospholipid, the sodium salt of dimyristoilphosphatidyl acid (DMPA), or a zwitterionic phospholipid, namely dimyristoilphosphatidylethanolamine (DMPE). This approach resulted in the formation of particulate calcium carbonate continuous films with different morphologies, particle sizes, and roughness, as revealed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The crystalline structure of the calcium carbonate particles was analyzed by Raman spectroscopy. The randomly coiled conformation of the polyelectrolytes seems to be the main reason for the formation of continuous films rather than CaCO3 isolated crystals. (C) 2012 Elsevier B.V. All rights reserved.