Humanised xenograft models of bone metastasis revisited : novel insights into species-specific mechanisms of cancer cell osteotropism

The determinants and key mechanisms of cancer cell osteotropism have not been identified, mainly due to the lack of reproducible animal models representing the biological, genetic and clinical features seen in humans. An ideal model should be capable of recapitulating as many steps of the metastatic cascade as possible, thus facilitating the development of prognostic markers and novel therapeutic strategies. Most animal models of bone metastasis still have to be derived experimentally as most syngeneic and transgeneic approaches do not provide a robust skeletal phenotype and do not recapitulate the biological processes seen in humans. The xenotransplantation of human cancer cells or tumour tissue into immunocompromised murine hosts provides the possibility to simulate early and late stages of the human disease. Human bone or tissue-engineered human bone constructs can be implanted into the animal to recapitulate more subtle, species-specific aspects of the mutual interaction between human cancer cells and the human bone microenvironment. Moreover, the replication of the entire "organ" bone makes it possible to analyse the interaction between cancer cells and the haematopoietic niche and to confer at least a partial human immunity to the murine host. This process of humanisation is facilitated by novel immunocompromised mouse strains that allow a high engraftment rate of human cells or tissue. These humanised xenograft models provide an important research tool to study human biological processes of bone metastasis.

Monte Carlo-based diode design for correction-less small field dosimetry

Due to their small collecting volume diodes are commonly used in small field dosimetry. However the relative sensitivity of a diode increases with decreasing small field size. Conversely, small air gaps have been shown to cause a significant decrease in the sensitivity of a detector as the field size is decreased. Therefore this study uses Monte Carlo simulations to look at introducing air upstream to diodes such that they measure with a constant sensitivity across all field sizes in small field dosimetry. Varying thicknesses of air were introduced onto the upstream end of two commercial diodes (PTW 60016 photon diode and PTW 60017 electron diode), as well as a theoretical unenclosed silicon chip using field sizes as small as 5 mm × 5 mm . The metric D_(w,Q)/D_(Det,Q) used in this study represents the ratio of the dose to a point of water to the dose to the diode active volume, for a particular field size and location. The optimal thickness of air required to provide a constant sensitivity across all small field sizes was found by plotting D_(w,Q)/D_(Det,Q) as a function of introduced air gap size for various field sizes, and finding the intersection point of these plots. That is, the point at which D_(w,Q)/D_(Det,Q) was constant for all field sizes was found. The optimal thickness of air was calculated to be 3.3 mm, 1.15 mm and 0.10 mm for the photon diode, electron diode and unenclosed silicon chip respectively. The variation in these results was due to the different design of each detector. When calculated with the new diode design incorporating the upstream air gap, k_(Q_clin 〖,Q〗_msr)^(f_clin 〖,f〗_msr ) was equal to unity to within statistical uncertainty (0.5 %) for all three diodes. Cross-axis profile measurements were also improved with the new detector design. The upstream air gap could be implanted on the commercial diodes via a cap consisting of the air cavity surrounded by water equivalent material. The results for the unclosed silicon chip show that an ideal small field dosimetry diode could be created by using a silicon chip with a small amount of air above it.

Alternative structural design strategies for bridge decks in low traffic volume roads

This research is part of a major project with a stimulus that rose from the need to manage a large number of ageing bridges in low traffic volume roads (LTVR) in Australia. The project investigated, designed and consequently constructed, involved replacing an ageing super-structure of a 10m span bridge with a disused Flat-bed Rail Wagon (FRW). This research, therefore, is developed on the premises that the FRW can be adopted as the main structural system for the bridges in LTVR network. The main focus of this research is to present two alternate deck wearing systems (DWS) as part of the design of the FRW as road bridge deck conforming to AS5100 (2004). The bare FRW structural components were first examined for their adequacy (ultimate and serviceability) in resisting the critical loads specified in AS5100(2004). Two options of DWSs were evaluated and their effects on the FRW examined. The first option involved usage of timber DWS; the idea of this option was to use all the primary and secondary members of the FRW in load sharing and to provide additional members where weaknesses in the original members arose. The second option involved usage of reinforced concrete DWS with only the primary members of the FRW sharing the AS5100 (2004) loading. This option inherently minimised the risk associated with any uncertainty of the secondary members to their structural adequacy. This thesis reports the design phases of both options with conclusions of the selection of the ideal option for better structural performance, ease of construction and cost. The comparison carried out here focuses on the distribution of the traffic load by the FRW as a superstructure. Advantages and disadvantages highlighting cost comparisons and ease of constructability of the two systems are also included.

Confidence in the police : balancing public image with community safety : a comparative review of the literature

Examining the evolution of British and Australian policing, this comparative review of the literature considers the historical underpinnings of policing in these two countries and the impact of community legitimacy derived from the early concepts of policing by consent. Using the August 2011 disorder in Britain as a lens, this paper considers whether, in striving to maintain community confidence, undue emphasis is placed on the police's public image at the expense of community safety. Examining the path of policing reform, the impact of bureaucracy on policing and the evolving debate surrounding police performance, this review suggests that, while largely delivering on the ideal of an ethical and strong police force, a preoccupation with self-image may in fact result in tarnishing the very thing British and Australian police forces strive to achieve – their standing with the public. This paper advocates for a more realistic goal of gaining public respect rather than affection in order to achieve the difficult balance between maintaining trust and respect as an approachable, ethical entity providing firm, confident policing in this ever-evolving, modern society.

Business model experimentation : what is the role of deign-led prototyping in developing novel business models?

This book presents readers with the opportunity to fundamentally re-evaluate the processes of innovation and entrepreneurship, and to rethink how they might best be stimulated and fostered within our organizations and communities. The fundamental thesis of the book is that the entrepreneurial process is not a linear progression from novel idea to successful innovation, but is an iterative series of experiments, where progress depends on the persistence and resilience of the individuals involved, and their ability and to learn from failure as well as success. From this premise, the authors argue that the ideal environment for new venture creation is a form of “experimental laboratory,” a community of innovators where ideas are generated, shared, and refined; experiments are encouraged; and which in itself serves as a test environment for those ideas and experiments. This environment is quite different from the traditional “incubator,” which may impose the disciplines of the established firm too early in the development of the new venture.

Preventing public sector corruption : the relationship between parliamentary committees and corruption commissions

Parliamentary committees fulfil several important functions within the Parliament, with one of these being the oversight of various agencies including those that are designed to reduce corruption within the police service and other public sector agencies. The cross-party nature of committees combined with the protections of Parliament make them powerful agencies. Prenzler & Faulkner (2010) suggest that the ideal system for an agency that has oversight of a public sector integrity commission should include monitoring by a parliamentary committee, with an inspector attached to the committee. This occurs in Queensland, New South Wales and Western Australia. There has been very little research conducted on the role of parliamentary committees with oversight responsibilities for public sector integrity agencies. This paper will address this gap by examining the relationship between a parliamentary committee, a parliamentary inspector and a corruption commission. Queensland’s Parliamentary Crime and Misconduct Committee (PCMC/the Committee) and the Parliamentary Crime and Misconduct Commissioner (the Commissioner) provide oversight of the Crime and Misconduct Commission (CMC). By focussing on the PCMC and the Commissioner, the paper will examine the legislative basis for the Committee and Commissioner and their respective roles in providing oversight of the CMC. One key method by which the PCMC provides oversight of the CMC is to conduct and publish a review of the CMC every three years. Additionally, the paper will identify some of the similarities and differences between the PCMC and other committees that operate within the Queensland Parliament. By doing so, the paper will provide insights into the relationships that exist between corruption commissions, parliamentary committees and parliamentary inspectors and demonstrate the important role of the parliamentary committee in preventing instances of public sector corruption.

Learning opportunities : a partnership, connecting learning with projects

Major construction projects undertaken on university campuses are an ideal opportunity to connect learners in related disciplines to the real thing. How often do universities take that opportunity, make the connection and value add to projects being carried out? Discussion with students and academic staff will consistently generate enthusiasm for creating learning activities and resources related to projects. Some typical disciplines are project management, all fields of engineering, architecture, interior design and information technology. Some other areas that may not at first seem obvious are business, marketing, communication and public relations. The authors will provide a case study based on the new Queensland University of Technology (QUT) Science and Engineering Centre project of how the partnership between QUT and Leighton Contractors, the managing contractor, has delivered excellent learning opportunities through the design and construction phases of the Science and Engineering Centre project.

Korean ubiquitous-eco-city : a smart-sustainable urban form or a branding hoax?

The buzzwords of zero-carbon, low-carbon, carbon-neutral, smart-eco and ubiquitous-eco have become common brands for the sustainable eco-cities of the 21st century. This paper focuses on one of these city types ‘ubiquitous-eco-city’ (u-eco-city). The principal premise of a u-eco-city is to provide a high quality of life and place to residents, workers and visitors with low-to-no negative impacts on the natural environment by using state-of-the-art technologies in the planning, development and management stages. The paper aims to put this premise into a test and address whether u-eco-city is a dazzling smart and sustainable urban form that constitutes an ideal 21st century city model or just a branding hoax. This paper explores recent developments and trends in the ubiquitous technologies, infrastructures, services and management systems, and their utilisation and implications for the development of u-eco-cities. The paper places Korean u-eco-city initiatives under microscope, and critically discusses their prospects in forming a smart and sustainable urban form and become an ideal city model.

The importance of individual difference : examining anthropomorphic tendency and responses to spokes-characters

Anthropomorphism is a cognitive bias, which occurs when individuals see human characteristics in a non-human agent, object or animal. Anthropomorphism is especially interesting to marketers, because once anthropomorphic bias has been triggered, it can lead to a greater feeling of connectedness to a non-human agent (Tam, Lee and Chao, 2013), the emulation of behaviours (Aggarwal and McGill, 2012) or greater attribution of brand personality and brand liking (Delbaere, McQuarrie and Phillips, 2011). Importantly, research now shows that levels of this tendency vary between individuals (Waytz, Cacioppo and Epley, 2010), but research to date has failed to focus on how anthropomorphic tendency influences individual responses to marketing communications messages. Spokes-characters present an ideal context through which to examine this gap, given that they function as personified brands, designed to trigger consumer anthropomorphic tendency. Further, little is understood about how spokes-characters operate and which consumers will prefer them to their human counterparts. Like anthropomorphic research, much empirical work to date has focused on design and outcomes, examining the sender’s encoding process and the feedback generated, but ignoring the individual decoding process that is so important to understanding individual differences and message effectiveness. The current research employs three experiments using an online survey with stimulus exposure to show that anthropomorphic tendency, personality similarity and spokes-character type all have relevance to the understanding of this complex relationship. Study one and two indicate that while a human spokesperson is still preferred by many, higher levels of anthropomorphic tendency increase likeability of cartoon spokes characters. Study three highlights the importance of personality similarity, which further increases likability. Additional analyses provide key findings concerning the nature of anthropomorphic tendency as an individual difference and trait. This research contributes to a greater understanding of anthropomorphism theory and fills existing gaps in the consumer psychology and marketing communications literature.

Reimagining learning spaces : A research report for the Queensland Council for Social Science Innovation

The purpose of the Reimagining Learning Spaces project was to conduct an empirical study that would result in findings to inform the design and use of physical school facilities and examine the ways in which these constructions influence pedagogy. The study focused on newly-established school libraries in Queensland, many of which had been established with funding from the Federal Government’s Building the Education Revolution economic stimulus program. To explore the field, the study sought multiple perspectives that included those of school students as well as teacher-librarians and other key school staff, addressing the following focus question: - How does the physical environment of school libraries influence pedagogic practices and learning outcomes? Further research questions that guided the inquiry included: - What are the implications for teacher-librarians when transitioning into a new library learning space? - How do members of the school community (principals, teachers, teacher-librarians and students) experience the creation of a new school library learning space? - How do school students imagine the design and use of engaging library learning spaces? An extensive review explored Australian and international literature based on the research questions, focused on the following major areas: • School library renewal: trends in reimagining the place of libraries in virtual and real space • School libraries as learning spaces: the expanded role of school libraries in whole-school pedagogical support. • The role of teacher-librarians in new times • Built environments and the implications for learning • Learners and learning in newly established spaces • Learning space design: perspectives, research and principles • Pedagogical principles and voices of experience • Transitions to newly created learning spaces Approach Using an innovative qualitative research design, Reimagining Learning Spaces investigated learner and teacher perspectives across three intersecting domains exploring: - Imagined spaces: learners’ imaginative concepts of learning within engaging learning environments; - Emerging spaces: experiences of teacher-librarians in the transition into new spaces for learning, and - Established spaces: learners’ and teachers’ perceptions of ways in which the physical environment influences and shapes pedagogy. Seven schools that had recently benefitted from the BER program became the research sites at which data were collected from teacher-librarians, teachers, school leaders and students. With this range of participants, an appropriately diverse set of data collection tools was developed, including video interviews, drawings, and focus groups. Evocative narrative case studies (Simons 2009) were developed from the data, representing the voices of users of learning spaces. Key findings The study’s findings are presented in this report and complemented by an array of visual materials on the project web site http:// The report includes: • a set of seven cases studies that reveal nuanced experiences of designing and creating school libraries, based on the narrative of key stakeholders (teacher-librarians, teachers, students and principals) • thematic discussion of student imaginings of their ideal school library, based on drawings and narrative of students at the seven case study schools • critical analysis of the case study and student imaginings, focusing on implications for (re)designing school learning spaces and pedagogy, and responding to the study’s overarching research question - .17 recommendations to support: designing, transitioning and reimagining pedagogy; leadership; and policy development

Porous graphene and nanomeshes

This chapter briefly introduces the concepts and modeling of gas/isotope separation by two dimensional carbon frameworks, i.e. porous graphene and carbon nanomeshes, on the basis of reviewing recent literatures. The small size of evenly distributed pores on these carbon frameworks make them ideal not only for the separation of small gas molecules but also for isotope separation by utilizing the different zero point energies induced by confinement of the pores. The related simulations were treated by transition state theory, an affordable yet precise method that could be adopted in combination with different levels of theory. Such method could be employed to evaluate the performance, as well as to aid the design, of other 2D carbon frameworks toward the goal of gas/isotope separation in the future.

Contemporary actor training in Australia

This professional doctorate included a major research project investigating the efficacy of acting methodologies taught at four leading Australian actor-training institutions - National Institute of Dramatic Art, Queensland University of Technology, Victorian College of the Arts, and Western Australian Academy of Performing Arts. This study represents the first review of its kind, in which the 'castability' of acting graduates from each of these schools was scrutinized by industry leaders. The study not only reveals the methodologies and philosophies of each school but determines an ideal set of practices for future consideration. The doctorate also included two practice-led projects examining the candidate's transition from actor and teacher of actors to theatre director. The candidate's qualitative study was also underpinned by reflective practice on her extensive professional experience as actor, teacher and director.

Shaping the conversation : how management consultants engage knowledge boundary processes

This paper aims to contribute to an understanding of what actually takes place during consulting engagements. It draws on data collected from a qualitative case study of eight engagements by a niche consultancy in Australia to describe how consultants actively engage boundary crossing processes to address knowledge boundaries encountered during formal interactions with clients. While consultants actively managed knowledge boundary processes during interactions, by applying techniques such as evoking an ‘ideal state’ for clients, the engagements also yielded many missed opportunities for knowledge transformation.

Parliamentary committee reviews of police oversight agencies : a Queensland case study

The suggested model of an ideal public sector corruption commission includes oversight by a parliamentary committee with an attached parliamentary inspector (Prenzler, 2009). However, little research has been conducted on parliamentary oversight of corruption commissions. In Queensland, a role of the Parliamentary Crime and Misconduct Committee, which has the Parliamentary Crime and Misconduct Commissioner attached, is to review the Crime and Misconduct Commission every three years. This paper considers the public written and oral submissions made to the Parliamentary Crime and Misconduct Committee in the four reviews of the Crime and Misconduct Committee conducted to date (2004, 2006, 2009 and 2012). By doing this, the paper will begin to identify the gaps in our understanding of the relationship between parliamentary committees and public sector corruption commissions and the processes used by parliamentary committees to provide oversight of corruption commissions.