Behavioural, physiological and morphological adaptations of the shanny (Blennius pholis) to the intertidal habitat

Immersed shannies (Blennius pholis) showed peak locomotory activity coincident with daylight high tides. Emersion caused cessation of breathing and bradycardia though Q02 was little affected. Q02 fell, however, when the abdomen was enclosed in an impermeable sheath to block cutaneous respiration. Gulping of air into the extensively vascular oesophagus probably also acts as a means of aerial respiration. Reimmersion of fish caused a transient bradycardia followed by a tachycardia and a fall in Q02 followed subsequently by a rise. The results are discussed in relation to the behavioural, circulatory, respiratory and morphological adaptations of the shanny to the intertidal habitat.

Volumetric properties, viscosity and refractive index of the protic ionic liquid, pyrrolidinium octanoate, in molecular solvents

Densities ([rho]) and viscosities ([eta]) of binary mixtures containing the Protic Ionic Liquid (PIL), pyrrolidinium octanoate with five molecular solvents: water, methanol, ethanol, n-butanol, and acetonitrile are determined at the atmospheric pressure as a function of the temperature and within the whole composition range. The refractive index of all mixtures (nD) is measured at 298.15†K. The excess molar volumes VE and deviation from additivity rules of viscosities [eta]E and refractive index [Delta][phi]n, of pyrrolidinium octanoate solutions were then deduced from the experimental results as well as apparent molar volumes V[phi]i, partial molar volumes and thermal expansion coefficients [alpha]p. The excess molar volumes VE are negative over the entire mole fraction range for mixture with water, acetonitrile, and methanol indicating strong hydrogen-bonding interaction for the entire mole fraction. In the case of longest carbon chain alcohols (such as ethanol and n-butanol)†+†pyrrolidinium octanoate solutions, the VE variation as a function of the composition describes an S shape. The deviation from additivity rules of viscosities is negative over the entire composition range for the acetonitrile, methanol, ethanol, and butanol, and becomes less negative with increasing temperature. Whereas, [eta]E of the {[Pyrr][C7CO2]†+†water} binary mixtures is positive in the whole mole fraction range and decreases with increasing temperature. the excess Gibbs free energies of activation of viscous flow ([Delta]G*E) for these systems were calculated. The deviation from additivity rules of refractive index [Delta][phi]n are positive over the whole composition range and approach a maximum of 0.25 in PIL mole fraction for all systems. The magnitude of deviation for [Delta][phi]n describes the following order: water†>†methanol†>†acetonitrile†>†ethanol. Results have been discussed in terms of molecular interactions and molecular structures in these binary mixtures.

Negative Aspects of Close Relationships as a Predictor of Increased Body Mass Index and Waist Circumference: The Whitehall II Study

Objectives. We investigated whether exposure to negative aspects of close relationships was associated with subsequent increase in body mass index (BMI) and waist circumference.
Methods. Data came from a prospective cohort study (Whitehall II) of 9425 civil servants aged 35 to 55 years at baseline (phase 1: 1985-1988). We assessed negative aspects of close relationships with the Close Persons Questionnaire (range 0-12) at phases 1 and 2 (1989-1990). We measured BMI and waist circumference at phases 3 (1991-1994) and 5 (1997-1999). Covariates at phase 1 included gender, age, marital status, ethnicity, BMI, employment grade, smoking, physical activity, fruit and vegetable consumption, and common mental disorder.
Results. After adjustment for sociodemographic characteristics and health behaviors, participants with higher exposure to negative aspects of close relationships had a higher likelihood of a 10% or greater increase in BMI and waist circumference (odds ratios per 1-unit increase 1.08 [95% confidence interval (CI)=1.02, 1.14; P=.007] and 1.09 [CI=1.04, 1.14; P <= .001], respectively) as well as a transition from the overweight (25 <= BMI <30) to the obese (BMI >= 30) category.
Conclusions. Adverse social relationships may contribute to weight gain.

Relationship between work stress and body mass index among 45,810 female and male employees

Objective: The proportion of overweight and obese people has grown rapidly, and obesity has now been widely recognized as an important public health problem. At the came time, stress has increased in working life. The 2 problems could be connected if work stress promotes unhealthy eating habits and sedentary behavior and thereby contributes to weight gain. This study explored the association between work stress and body mass index (BMI; kg/m(2)). Methods: We used cross-sectional questionnaire data obtained from 45,810 female and male employees participating in the ongoing Finnish Public Sector Cohort Study. We constructed individual-level scores, as well as occupational- and organizational-level aggregated scores for work stress, as indicated by the demand/control model and the effort-reward imbalance model. Linear regression analyses were stratified by sex and socioeconomic status (SES) and adjusted for age, marital status, job contract, smoking, alcohol consumption, physical activity, and negative affectivity. Results: The results with the aggregated scores showed that lower job control, higher job strain, and higher effort-reward imbalance were associated with a higher BMI. In men, lower job demands were also associated with a higher BMI. These associations were not accounted for by SES, although an additional adjustment for SES attenuated the associations. The results obtained with the individual-level scores were in the same direction, but the relationships were weaker than those obtained with the aggregated scores. Conclusions: This study shows a weak association between work stress and BMI.

Habitat associations of the red squirrel Sciurus vulgaris and grey squirrel S-carolinensis in Northern Ireland

A survey of red and grey squirrel habitat associations in Northern Ireland was conducted between September 1994 and August 1995. Two hundred and sixty-one sites were visited and a list of habitat characteristics for each site was noted. Multiple discriminant function analysis of the habitat type was employed to group squirrel occurrence, while contingency analysis examined independence of habitat type and squirrel species presence. Habitat associations differed between the two species. One-way ANOVAs of habitat data suggested that sites occupied by red squirrels only were predominantly coniferous, at higher altitude and latitude and much larger in area than sites occupied by grey squirrels only, which were mostly deciduous. When both species were sympatric, sites were more likely to be coniferous and larger in area than sites occupied by either species. Grey squirrels were less frequent than expected in upland plantations and more frequent than expected in parkland and gardens; the opposite was true for red squirrels. The mean distance between sites with only red squirrels and the nearest site with grey squirrels was greater than the mean distance between sites with only grey squirrels and the nearest site with red squirrels. An approach to conserving the red squirrel in view of the continued expansion in the grey squirrel's distribution in Ireland is discussed.

Habitat effects on the spatial ecology of the European badger (Meles meles)

This study investigates how habitat variation affects sett density, the number of animals per social group and group territory size in the badger (Meles meles). Identical methods were applied in three habitat types: lowland parkland with mixed woodland, pastoral farmland and upland rough pasture with moorland, representing areas of presumed good, medium and poor badger habitat, respectively. Contiguous main setts were identified and bait-marking was used to estimate territory size. Group size was estimated by direct enumeration. Variation in sett density, group size and territory size supported the hypothesis that badger group and territory size are influenced by habitat type. This was further supported by analyses of data from other studies in the British Isles. The implications for badger spatial ecology, badger survey techniques and the badger's role in the epidemiology of TB are discussed.

Range expansion in an invasive small mammal: influence of life-history and habitat quality.

Invasive species pose a major threat to biodiversity but provide an opportunity to describe the processes that lead to changes in a species’ range. The bank vole (Myodes glareolus) is an invasive rodent that was introduced to Ireland in the early twentieth century. Given its continuing range expansion, the substantial empirical data on its spread thus far, and the absence of any eradication program, the bank vole in Ireland represents a unique model system for studying the mechanisms influencing the rate of range expansion in invasive small mammals. We described the invasion using a reaction–diffusion model informed by empirical data on life history traits and demographic parameters. We subsequently modelled the processes involved in its range expansion using a rule-based spatially explicit simulation. Habitat suitability interacted with density-dependent parameters to influence dispersal, most notably the density at which local populations started to donate emigrating individuals, the number of dispersing individuals and the direction of dispersal. Whilst local habitat variability influenced the rate of spread, on a larger scale the invasion resembled a simple reaction–diffusion process. Our results suggest a Type 1 range expansion where the rate of expansion is generally constant over time, but with some evidence for a lag period following introduction. We demonstrate that a two-parameter empirical model and a rule-based spatially explicit simulation are sufficient to accurately describe the invasion history of a species that exhibits a complex, density-dependent pattern of dispersal.

On generating set index functions for randomized caches

Caches hide the growing latency of accesses to the main memory from the processor by storing the most recently used data on-chip. To limit the search time through the caches, they are organized in a direct mapped or set-associative way. Such an organization introduces many conflict misses that hamper performance. This paper studies randomizing set index functions, a technique to place the data in the cache in such a way that conflict misses are avoided. The performance of such a randomized cache strongly depends on the randomization function. This paper discusses a methodology to generate randomization functions that perform well over a broad range of benchmarks. The methodology uses profiling information to predict the conflict miss rate of randomization functions. Then, using this information, a search algorithm finds the best randomization function. Due to implementation issues, it is preferable to use a randomization function that is extremely simple and can be evaluated in little time. For these reasons, we use randomization functions where each randomized address bit is computed as the XOR of a subset of the original address bits. These functions are chosen such that they operate on as few address bits as possible and have few inputs to each XOR. This paper shows that to index a 2(m)-set cache, it suffices to randomize m+2 or m+3 address bits and to limit the number of inputs to each XOR to 2 bits to obtain the full potential of randomization. Furthermore, it is shown that the randomization function that we generate for one set of benchmarks also works well for an entirely different set of benchmarks. Using the described methodology, it is possible to reduce the implementation cost of randomization functions with only an insignificant loss in conflict reduction.