The design and construction of flat rectangular otter boards for bottom trawling: a review

The design and construction of the otter board is a subject of great importance for economy in trawling. This review incorporates a historical resume tracing the change and development• of otter boards. The size of the otter board and its relationship with the horse power of the engine and size of the net and the methods of rigging are dealt with. The factors influencing the horizontal spread are discussed. The effect of the angles of attack, heel and tilt and the ground reaction on the force coefficients have been reviewed and discussed with particular reference to flat rectangular otter boards used for bottom trawling. A short account of other designs of otter boards used for improved efficiency is given. Suggestion for improving the efficacy of otter boards based on the work hitherto done has been made. The contributions relating to the various aspects of design and performance of trawl boards carried out till 1969 have been considered.

Results of comparative fishing trials with rectangular flat and rectangular curved otter boards

The communication deals with the results of comparative fishing operations conducted to study the effectiveness of rectangular flat and rectangular curved otter boards. Based on the analysis of data gathered during the course of actual field trials, following conclusions have been drawn: the average catch per hour of trawling was more by 22 kg during attachment of rectangular curved otter boards. The average horizontal spread between rectangular curved otter boards in action was more by 13% and works out to 50% of the head-rope length of the net including sweeps. The towing resistance of the gear with horizontally curved otter boards was more by 10%.

Expert system for prestressed concrete bridge design

The development of an expert system, BRIDEX, for the design of prestressed concrete bridges is discussed in this paper. Design of multi-span continuous pre-stressed concrete bridges pose considerable difficulties to designers because of the large number of parameters involved and their complex interactions. The design is often perceived as an iterative process of generation, evaluation and modification of trial designs. It takes years of experience to develop an understanding of the design process. BRIDEX is aimed at providing guidance to the designers by suggesting appropriate range of values for the design parameters. The knowledge within BRIDEX is mainly based on fundamental principles developed by a careful study of the intricacies involved in the design process, while heuristics are used only to supplement this knowledge. The BRIDEX approach ensures that the whole design evolves sequentially as the design proceeds, module after module.

Movement of deposited water on turbomachinery rotor blade surfaces

A theoretical approach for calculating the movement of liquid water following deposition onto a turbomachine rotor blade is described. Such a situation can occur during operation of an aero-engine in rain. The equation of motion of the deposited water is developed on an arbitrarily oriented plane triangular surface facet. By dividing the blade surface into a large number of facets and calculating the water trajectory over each one crossed in turn, the overall trajectory can be constructed. Apart from the centrifugal and Coriolis inertia effects, the forces acting on the water arise from the blade surface friction, and the aerodynamic shear and pressure gradient. Non- dimensionalisation of the equations of motion provides considerable insight and a detailed study of water flow on a flat rotating plate set at different stagger angles demonstrates the paramount importance of blade surface friction. The extreme cases of low and high blade friction are examined and it is concluded that the latter (which allows considerable mathematical generalisation) is the most likely in practice. It is also shown that the aerodynamic shear force, but not the pressure force, may influence the water motion. Calculations of water movement on a low-speed compressor blade and the fan blade of a high bypass ratio aero-engine suggest that in low rotational speed situations most of the deposited water is centrifuged rapidly to the blade tip region. Copyright © 2006 by ASME.

Sri Lanka: is it a mid-plate platelet?

Two observations suggest the possibility that Sri Lanka is acting as a small-mid-plate platelet moving very slowly within and relative to the larger Indian plate. First, sediments of the Bengal Deep-Sea Fan off the SSE continental margin are folded and uplifted in a manner similar to the deformation from front of accretionary prisms where thick sediment columns are passing into subduction zones. And second, subsidence rates in the area of presumed spreading or continuing stretching of continental crust, the Cauvery-Palk Strait-Gulf of Mannar Basin, have not decreased during the Cenozoic as would be predicted by an aborted rift or aulacogen model, but instead appear to have accelerated during the Neogene. Information available on other phenomena which re predicted by the model is at the present time inadequate for evaluation.

Thermal characterization of SOI CMOS micro hot-plate gas sensors

This work reports on thermal characterization of SOI (silicon on insulator) CMOS (complementary metal oxide semiconductor) MEMS (micro electro mechanical system) gas sensors using a thermoreflectance (TR) thermography system. The sensors were fabricated in a CMOS foundry and the micro hot-plate structures were created by back-etching the CMOS processed wafers in a MEMS foundry using DRIE (deep reactive ion etch) process. The calibration and experimental details of the thermoreflectance based thermal imaging setup, used for these micro hot-plate gas sensor structures, are presented. Experimentally determined temperature of a micro hot-plate sensor, using TR thermography and built-in silicon resistive temperature sensor, is compared with that estimated using numerical simulations. The results confirm that TR based thermal imaging technique can be used to determine surface temperature of CMOS MEMS devices with a high accuracy. © 2010 EDA Publishing/THERMINIC.

Proximate composition of five species of flat fishes

Five species of flat fishes, namely Cynoglossus semifaciatus, C. lida, C. bilineatus, C. macrolepidotus and Psettodes erumei caught in trawlers off Mangalore were analysed for proximate composition of different body parts. These data are discussed in terms of their variability and applications. In whole body of C. lida and C. semifaciatus mean values for moisture, protein, fat and ash content on dry basis respectively were 75.9%, 75.3%, 7.1%, 16.1% and 78.9%, 75.6%. 7.9% and 16.6%. Mean values of these constituents of edible parts in the same order for C. semifaciatus and Psettodes erumei were 77.3%, 80.7%, 7.8%, 10.8% and 77.4%, 86.2%, 3.5% and 11.1% respectively.

Effect of incubation period on plate count of raw ices and frozen fish

The total viable counts were estimated in one hundred and sixty five samples of raw, iced and frozen fish using incubation periods of 24, 48, 72 and 96h. For raw fish, 24h and for iced and frozen fish 48h incubation of the plates were found to be adequate. Variation between samples was significant at 1% level for raw iced and frozen samples.

On the comparative efficiency of "V" shaped and rectangular flat otter boards for trawling off Veraval, north west coast of India

V shaped all steel boards, with their inherent stability to tide over obstacles and mud, interchangeability of starboard and portside boards are found to be superior to conventional flat rectangular boards for bottom trawling. These are cheaper in construction, offer less resistance and give longer service. Comparative trials with the two types of boards showed significant difference in tension between the boards but not in catch or horizontal opening.

Advantages of liquid nitrogen freezing of Penaeus monodon over conventional plate freezing

Liquid nitrogen frozen products are biochemically and organoleptically superior to conventional plate frozen products but beneficial effect of liquid nitrogen freezing over conventional plate freezing can exist only up to 59 days at a commercial storage temperature of -18°C.