Comment on 'processing and microstructure of single grain uranium-doped Y-Ba-Cu-O superconductor'

We comment on the paper by N Hari Babu et al. (2002 Supercond. Sci. Technol. 15 104-10) and point out misinterpretations of the chemical composition of U-bearing deposits observed in Y123. The observed small deposits are those of new compounds which do not contain Cu, rather than refined Y211 plus U, as stated by the authors. We further note that extensive literature, not quoted, is in disagreement by nearly an order of magnitude concerning the values of Pt and U doping at which the optimum value of Jc is obtained. Other related information, presently in the literature, which may be helpful to those working with this high temperature superconducting chemical system, is presented.

Socio-cultural influences on sanitation, fish handling and artisanal fish processing within the fishing communities

The fishery sector in Uganda has seen important changes in the last two decades. Among the changes registered, is the expansion of fish markets locally, regionally and internationally. Upon which, remarkable benefits have been realized at local and national levels, for instance, it is estimated that an average of 40m$ is being earned annually as foreign exchange. Besides, presently fish accounts for over 50% of total animal protein in take. However, it is argued that sustaining these gains has become an up hill task due to failure to maintain fish quality as a result of the rudimentary and inappropriate sanitary, fish handling and artisanal fish processing practices that both directly and indirectly affect the quality of fish and fish products. Therefore, against this background, a study of 507 respondents was undertaken among the Lake Victoria Communities specifically in Wakiso, Mayuge and Mukono districts. The study examined the perceptions of fishers on the social cultural practices of sanitation, fish handling and artisanal fish processing and consequently identified factors that influenced these practices.

National Agricultural Research Organisation. Fisheries Resources Research Institute Annual Report 2000/2001

It is now clear that fisheries resources are among the key assets contributing to the national development objective of poverty eradication through providing food, employment, income and export earnings. It was recently reported in the papers that monthly fish exports had increased by 23% and fetched about US$ 10 Million during the month of November 2001 alone. This value may be underestimated as it is based solely on recorded exports from fish processing factories numbering 12. Although fisheries resources are renewable they can be depleted through unsustainable exploitation. It is therefore important to ensure that there is guided development and management of this asset so that it can continue contributing to the livelihood of the people who depend on it. Therefore, FIRRI contributes to the fisheries sub-sector developmental objective of ensuring increased and sustainable fishery production and utilization by providing information to guide sustainable management of capture fisheries resources and development of aquaculture.

Sanitation, fish handling and artisanal fish processing within fishing communities: socio-cultural influences

postive transformation of the fisheries sector in Uganda has of recent been scatted by failure to mountain fish quality and safety,akey prerequiste for retaining and gaining fish markets. The social cultural study established the extent to which social cutural practices had affected the levels and the use of sanitation facilities,fish handling facilities and artisanal fish processing techniques and the factors that influenced these practices in the fishing communities of lake victoria. This information is of significance for the purpose of advocacy and mobilization of fishers in order to improve sanitation, fish handling and artisanal fishing processing situation in the fishing communities.

Alternative uses of partitioning interwell tracer tests for DNAPL source zone characterisation

The heterogeneous nature of the subsurface and associated DNAPL morphologies often poses the greatest limitation to source zone clean-up strategies. Hence, detailed site characterisation techniques are required. The data presented in this paper has been collected from a series of laboratory 2-D tank experiments and numerical simulations of Partitioning Interwell Tracer Tests (PITT) in a wide range of aquifer conditions and DNAPL morphologies. Alternative uses of tracer breakthrough data have been developed In order to characterise the mass flux generated from the DNAPL source. By combining the laboratory and numerical data, a relationship between normalised mass flux and tracer-based average source zone DNAPL saturation has been established. Knowledge of such a relationship allows remediation targets to be identified, clean-up efficiencies to be evaluated, and increases the accuracy of any risk assessment.

200 mile Exclusive Economic Zone and fishery development in Sri Lanka

Following details of the marine fishery resources of Sri Lanka, prospects for fishery development with respect to the 200-mile Economic Zone are examined, outlining also the 5-year fisheries development plan (1979-83).

De-scummer for beche-de-mer processing

An improved method for processing sea cucumber (beche-de-mer) is described. Details of a machine named de-scummer are presented. The traditional method for preparation is discussed, and the new method outlined; this involves burying boiled sea cucumber in clean sand contained in cement pits for periods of 6-8 h. The animals are then transferred to the de-scummer for mechanical treatment and are boiled again. After this they are dried.

Millisecond processing beyond chip technology: From electronics to photonics

There is a clear and increasing interest in short time annealing processing far below one second, i.e. the lower limit of Rapid Thermal Processing (RTP) called spike annealing. This was driven by the need of suppressing the so-called Transient Enhanced Diffusion in advanced boronimplanted shallow pn-junctions in silicon technology. Meanwhile the interest in flash lamp annealing (FLA) in the millisecond range spread out into other fields related to silicon technology and beyond. This paper reports on recent experiments regarding shallow junction engineering in germanium, annealing of ITO layers on glass and plastic foil to form an conductive layer as well as investigations which we did during the last years in the field of wide band gap semiconductor materials (SiC, ZnO). A more common feature evolving from our work was related to the modeling of wafer stress during millisecond thermal processing with flash lamps. Finally recent achievements in the field of silicon-based light emission basing on Metal-Oxide-Semiconductor Light Emitting Devices will be reported. © 2007 IEEE.

Advanced thermal processing of semiconductor materials in the msec-range

This paper reviews the advances that flash lamp annealing brings to the processing of the most frequently used semiconductor materials, namely silicon and silicon carbide, thus enabling the fabrication of novel microelectronic structures and materials. The paper describes how such developments can translate into important practical applications leading to a wide range of technological benefits. Opportunities in ultra-shallow junction formation, heteroepitaxial growth of thin films of cubic silicon carbide on silicon, and crystallization of amorphous silicon films, along with the technical reasons for using flash lamp annealing are discussed in the context of state-of-the-art materials processing. © 2005 IEEE.

Bayesian signal processing

The application of Bayes' Theorem to signal processing provides a consistent framework for proceeding from prior knowledge to a posterior inference conditioned on both the prior knowledge and the observed signal data. The first part of the lecture will illustrate how the Bayesian methodology can be applied to a variety of signal processing problems. The second part of the lecture will introduce the concept of Markov Chain Monte-Carlo (MCMC) methods which is an effective approach to overcoming many of the analytical and computational problems inherent in statistical inference. Such techniques are at the centre of the rapidly developing area of Bayesian signal processing which, with the continual increase in available computational power, is likely to provide the underlying framework for most signal processing applications.

A practical demonstration of scalable, parallel mesh generation

Cambridge Flow Solutions Ltd, Compass House, Vision Park, Cambridge, CB4 9AD, UK Real-world simulation challenges are getting bigger: virtual aero-engines with multistage blade rows coupled with their secondary air systems & with fully featured geometry; environmental flows at meta-scales over resolved cities; synthetic battlefields. It is clear that the future of simulation is scalable, end-to-end parallelism. To address these challenges we have reported in a sequence of papers a series of inherently parallel building blocks based on the integration of a Level Set based geometry kernel with an octree-based cut-Cartesian mesh generator, RANS flow solver, post-processing and geometry management & editing. The cut-cells which characterize the approach are eliminated by exporting a body-conformal mesh driven by the underpinning Level Set and managed by mesh quality optimization algorithms; this permits third party flow solvers to be deployed. This paper continues this sequence by reporting & demonstrating two main novelties: variable depth volume mesh refinement enabling variable surface mesh refinement and a radical rework of the mesh generation into a bottom-up system based on Space Filling Curves. Also reported are the associated extensions to body-conformal mesh export. Everything is implemented in a scalable, parallel manner. As a practical demonstration, meshes of guaranteed quality are generated for a fully resolved, generic aircraft carrier geometry, a cooled disc brake assembly and a B747 in landing configuration. Copyright © 2009 by W.N.Dawes.

Monsoon trawl ban and its effects on the livelihood of trawl labourers: the case with Versova fishing village in Maharashtra

Indian fisheries sector in view of its potential contribution to national income, nutritional security, employment opportunities, social objectives and export earnings, plays an important role in the socio-economic development of the country. Fisheries sector contributes 4.3% to the agricultural GDP and export earnings are presently valued at over INR 68 billion from a volume of 460,000 tons. In addition, it provides direct and indirect employment and dependency for over seven million people in the country. With an estimated production potential of 8.4 million tons, the present level of production in the country is 5.9 million tons with almost equal contribution from both marine and inland sectors. The estimated fisheries potential from the Indian exclusive economic zone was found to be 3.9 million tons. But in spite of the increased efforts in fish production, the catch stagnates around 2.9 million tons. The stagnation in catches, mainly due to the over exploitation of dwindling marine resources, forced the government to impart some management measures to regulate the fishery and for the sustenance of the marine resources. The monsoon trawl ban in fisheries was one of the major reforms, which had created a substantial increase in fish production in the past few years. The ban on trawling during monsoon season was introduced in Maharashtra, after a series of studies, from 1992 for a period of 65 days from 10 June to 15 August or Naralipoornima, whichever is earlier. A notable increase in production from the marine sector of the country occurred in the post-ban period. Nevertheless, it had created problems in employment, poverty and income distribution of fishermen during the ban period and was always a matter of unrest between mechanized and traditional sectors of fishing. The aim of this study was to understand the impact of the ban on monsoon trawling in employment pattern, poverty and income distribution of fishermen along the coast of Maharashtra. The study was conducted at the Versova fishing village, Mumbai, and provides reflections on the possible impact of monsoon ban in the livelihood and standard of living of the fishermen in the state.

Consumption pattern and consumer preference for value-added fish and fish products in north zone of India

Present paper attempts to analyze consumption pattern and consumer preferences towards value-added fish and fish products in north zone of India. Results reveal that socio economic variables affect consumption of value-added fish and fish products. A total of 49 percent respondents were of middle age group (35 to 50 years). All were literates except 7% from the rural area. All were purchasing fish at least once in 15 days. A total of 90% respondents in rural, 11% in semi urban and 50% in urban area were unaware of value-added fish and fish products. About 10% of respondents had consumed it, out of which most were from urban area. Demand analysis by Cobb Douglas (CD) Demand function revealed that when price of fish, price of the substitutes, income of family and family size were used as independent variables, variation in demand of fish explained by CD Demand function was about 39% in urban area, 24% in semi urban area and 22% in rural area. From Garette ranking technique major problems in fish consumption found were irregular supply, lack of fresh fish, high price and presence of bones in fish. While lack of awareness, unavailability, no preference and unacceptable taste were major problems for consumption of value-added fish and fish products.

Statistical quality control charts on attributes in fish processing technology

Apart from the use of statistical quality control chart for variables or attributes of food products in a food processing industry, the application of these charts for attributes of fishery products is explained. Statistical quality control chart for fraction defectives is explained by noting defective fish sausages per shift from a sausage industry while control chart for number of defectives is illustrated for number of defective fish cans in each hour of its production of a canning industry. C-chart is another type of control chart which is explained here for number of defects per single fish fillet sampled a1l random for every five minutes in a processing industry. These statistical quality control charts help in the more economic use of resource, time and labour than control charts for variables of products. Also control charts for attributes exhibit the quality history of finished products at different times of production thereby minimizing the risk of consumer rejection.