Establishment of a Developmental Compartment Requires Interactions between Three Synergistic Cis-regulatory Modules.

The subdivision of cell populations in compartments is a key event during animal development. In Drosophila, the gene apterous (ap) divides the wing imaginal disc in dorsal vs ventral cell lineages and is required for wing formation. ap function as a dorsal selector gene has been extensively studied. However, the regulation of its expression during wing development is poorly understood. In this study, we analyzed ap transcriptional regulation at the endogenous locus and identified three cis-regulatory modules (CRMs) essential for wing development. Only when the three CRMs are combined, robust ap expression is obtained. In addition, we genetically and molecularly analyzed the trans-factors that regulate these CRMs. Our results propose a three-step mechanism for the cell lineage compartment expression of ap that includes initial activation, positive autoregulation and Trithorax-mediated maintenance through separable CRMs.

Business Process Reengineering - Liiketoimintaprosessin uudistaminen Helsingin ja Uudenmaan sairaanhoitopiirin laboratorioliikelaitoksessa

Tutkimuksen tavoitteena on selvittää laboratoriotutkimuksien liiketoimintaprosessin uudistamisen hyödyt ja haitat Helsingin ja Uudenmaan sairaanhoitopiirin laboratorioliikelaitokselle. Tutkimuksessa selvitetään myös, kannattaako HUSLAB:n uudistaa nykyistä laboratoriotutkimuksien liiketoimintaprosessiaan sekä mitkä ovat liiketoimintaprosessin uudistamisen vaikutukset HUSLAB:lle. Tutkimuksessa mallinnetaan laboratoriotutkimuksien nykyinen liiketoimintaprosessi, jonka pohjalta muodostetaan kuvaus uudistettavasta prosessista. Prosessien välisiä eroja tutkitaan tarkemmin HUSLAB:n yhdessä toimipisteessä. Tutkimuksessa selvitetään, kuinka toimipisteen kustannusrakenne ja toimintamalli muuttuisivat prosessin uudistamisen myötä. Tutkimuksen empiiristen tulosten mukaan HUSLAB:n ei kannata uudistaa laboratoriotutkimuksien liiketoimintaprosessiaan tutkimuksessa kuvatulla tavalla. Liiketoimintaprosessin uudistaminen osoittautui kannattamattomaksi, koska uudistamisen haitat muodostuivat hyötyjä suuremmiksi. Vaikka BPR:ää ei kannatta toteuttaa tutkimuksessa esitetyllä tavalla, voi BPR kuitenkin olla tulevaisuudessa varteenotettava vaihtoehto HUSLAB:n toimintaa muutettaessa.

“Of Spitzenkandidaten and European Leaders”: Is the new 2014 "politicized” Presidency of the Commission going to be a real step forward in the EU legitimization process?

Thanks to ART.17.7 of the Lisbon Treaty, the European Council now has to “take into account” the results of EP Elections when selecting a candidate for the role of Commission President. The European Parliament has grabbed the opportunity to launch the first electoral race for spitzenkandidaten to the Presidency. Is this the start of a new democratizing (and thus, politicizing) process for the European Union? This dissertation will try to give a possible answer to the dilemma by constructing a comprehensive framework around EP Elections 2014 that will involve both the Commission and the Parliament and an analysis of the debate beyond legal provisions and the possibility of a politicized presidency of the Commission.

Design and physicochemical stability studies of paediatric oral formulations of sildenafil

Abstract Personalized medicine is a challenging research area in paediatric treatments. Elaborating new paediatric formulations when no commercial forms are available is a common practice in pharmacy laboratories; among these, oral liquid formulations are the most common. But due to the lack of specialized equipment, frequently studies to assure the efficiency and safety of the final medicine cannot be carried out. Thus the purpose of this work was the development, characterization and stability evaluation of two oral formulations of sildenafil for the treatment of neonatal persistent pulmonary hypertension. After the establishment of a standard operating procedure (SOP) and elaboration, the physicochemical stability parameters appearance, pH, particle size, rheological behaviour and drug content of formulations were evaluated at three different temperatures for 90 days. Equally, prediction of long term stability, as well as, microbiological stability was performed. Formulations resulted in a suspension and a solution slightly coloured exhibiting fruity odour. Formulation I (suspension) exhibited the best physicochemical properties including Newtonian behaviour and uniformity of API content above 90% to assure an exact dosification process.

Regenerated cellulose ultrafiltration membranes in the treatment of pulp and paper mill process waters

Ultrafiltration (UF) is widely applied in different separation processes in the pulp and paper industry. The growing need to protect the environment, a lack of pure water and an interest in producing high-value chemicals from compounds present in process waters will probably lead to an increase in the use of UF in the pulp and paper industry. The efficiency and cost-effectiveness of a UF process depends on the applied membrane. The membrane should have a high and stable filtration capacity, a particular selectivity and a long operational lifetime. To meet these requirements a membrane should have a low fouling tendency. In addition, it should withstand the prevailing operational and chemical conditions. This thesis evaluates the performance and applicability of the regenerated cellulose (RC) membranes 00030T and C2 in the treatment of pulp and paper mill process waters based on the requirements above. The results demonstrated that both the tested RC membranes fulfilled well the requirement of high filtration capacity. In addition, in the filtration of a paper mill clear filtrate (CF) the RC membranes were not as greatly affected by variations in the CF quality as a polysulphone membrane. Furthermore, due to their extreme hydrophilicity and weak charge the fouling tendency of the membranes can be expected to be low in pulp and paper mill filtration applications. It is, however, known that fouling cannot be totally avoided even when the membrane is chosen very carefully. This study indicated that carbohydrates influenced negatively on permeability and caused fouling in the filtration of groundwood mill circulation water. Thus, a pre-treatment effectively reducing the amount of carbohydrates might help to maintain a stable capacity. However, the results of the thesis also showed that the removal of some of the possible foulants might just increase the harmful effect of others. Multivariate examination was useful in the understanding of the complicated factors causing the unstable capacity. The thesis also revealed that the 00030T and C2 membranes can be used at high pressure (max. tested pressure 12 bar). The C2 membrane, having a sponge-like substructure, was more pressure resistant, and its performance was more stable at high pressure compared to the UCO30T membrane containing macrovoids in its substructure. Both tested membranes can, according to the results, also be used at temperatures as high as 70°C in acidic, neutral and alkaline conditions. However, the use at extreme conditions might cause faster ageing of the membranes compared to ageing in neutral conditions. The thesis proved that both the tested RC membranes are very suitable for pulp and paper mill applications and that the membranes can be utilised in processes operating in challenging conditions. Thus, they could be used in more demanding applications than supposed earlier.

Facilitating coordination improvement efforts in cross-functional process development programs

Business process improvement is a common approach in increasing the effectiveness of an organization. It can be seen as an effort to increase coordination between units. Process improvement has proved to be challenging, and most management consultation firms facilitate organizations in this kind of initiatives. Cross-functional improvement is one of the main areas for internal consultants as well. However, the needs, challenges and means of cross-functional help have been rarely discussed in the literature. The objective of this thesis is on one hand to present a conceptual and descriptive framework to help understand the challenges of facilitating coordination improvement efforts in cross-functional improvement programs, and on the other hand to develop and test feasible solutions for some facilitation situations. The research questions are: 1. Why and in what kind of situations do organizations need help in developing coordination in cross-functional processes? 2. How can a facilitator help organizations in improving coordination to develop cross-functional processes? The study consists of two parts. The first part is an overview of the dissertation, and the second part comprises six research publications. The theoretical background for the study are the differentiation causing challenges in cross-functional settings, the coordination needed to improve processes, change management principles, methods and tools, and consultation practises. Three of the publications introduce tools for helping in developing prerequisites, planning responsibilities and supporting learning during the cross-functional program. The three other papers present frameworks to help understand and analyse the improvement situation. The main methodological approaches used in this study are design science research, action research and case research. The research data has been collected from ten cases representing different kinds of organizations, processes and developing situations. The data has been collected mainly by observation, semi-structured interviews and questionnaires. The research contributes to the rare literature combining coordination theories and process improvement practises. It also provides additional understanding of a holistic point of view in process improvement situations. The most important contribution is the addition to the theories of facilitating change in process improvement situations. From the managerial point of view, this study gives advice to managers and consultants in planning and executing cross-functional programs. The main factors increasing the need for facilitation are the challenges for differentiation, challenges of organizational change in general, and the novelty of initiatives and improvement practices concerning process development. Organizations need help in creating the prerequisites to change, in planning initiatives, easing conflict management and collaboration between groups, as well as supporting the learning of cross-functional improvement. The main challenges of facilitation are combining the different roles as a consultant, maintaining the ownership for the improvement project with the client, and supporting learning in the client organization.

On the dynamics of exports and FDI: The Spanish Internationalization Process

This paper provides further insights into the dynamics of exports and outward foreign direct investment (FDI) flows in Spain from a time-series approach. The contribution of the paper is twofold: 1) the existence of either substitution or a complementary relationship between Spanish outward investments and exports is empirically tested using a multivariate cointegrated model (VECM). The evolution in exchange flows (1993-2008) and country-specific variables (such as world demand - including Spain’s main recently growing foreign markets - for trade flows and the relative price of exports in order to proxy new global competitors) are taken into account for the first time. And 2) the growth in the trade of services in recent decades leads us to test a specific causality relationship by disaggregating between goods and services flows. Our results provide evidence of a positive (Granger) causality relationship running from FDI to exports of goods (stronger) and to exports of services (weaker) in the long run, the complementarity relation of which is consistent with vertical FDI strategies. In the short run, however, only exports of goods are affected (positively) by FDIs.

Blurred pictures from the crime scene: the growing case for a function of Chlamydiales in plastid endosymbiosis.

A number of recent papers have brought suggestive evidence for an active role of Chlamydiales in the establishment of the plastid. Chlamydiales define a very ancient group of obligate intracellular bacterial pathogens that multiply in vesicles within eukaryotic phagotrophic host cells such as animals, amoebae or other protists, possibly including the hypothetical phagotroph that internalized the cyanobacterial ancestor of the plastid over a billion years ago. We briefly survey the case for an active role of these ancient pathogens in plastid endosymbiosis. We argue that a good understanding of the Chlamydiales infection cycle and diversity may help to shed light on the process of metabolic integration of the evolving plastid.

The transatlantic business community faced with US direct investment in Western Europe, 1958-1968

This article examines the position of US and European business in the debate about American direct investment in Western Europe in a historical perspective, from the establishment of the Common Market to the introduction of US regulation of foreign direct investment (FDI) a decade later. Based on abundant and diverse archival documents, it sheds new light on the process of Americanisation and contributes to existing research on transnational networks, by revealing the active role industrial leaders on both sides of the Atlantic played in shaping the political responses to problems raised by the American firms' massive presence in the Common Market.

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders