Efeito do macrodipolo sobre a estabilidade térmica de derivados de 1,3,5-tricarboxamida-ciclo-hexano

1,3,5-tricarboxamida-ciclo-hexano são compostos capazes de se autoagregarem formando colunas supramoleculares as quais se mantêm unidas não só devido às interações das cadeias laterais mas também devido às ligações de hidrogênio de cada um dos três grupos amida por monômero. Cada monômero possui momento de dipolo elétrico associado aos grupos amida. Quando as amidas dos vários monômeros dentro da mesma coluna estão apontadas para a mesma direção, os momentos de dipolo individuais de todas as amidas se somam formando elevado dipolo ao longo do eixo da coluna, chamado de macrodipolo, o qual influencia as interações intercolunares. Neste trabalho foram investigadas quatro conformações as quais diferem entre si em relação à orientação dos grupos carbonila: a conformação Up-Up contém grupos carbonilas paralelos dentro das colunas e colunas paralela, a conformação Up-Down possui grupos carbonilas paralelos dentro das colunas e colunas antiparalelas, a conformação Intra-Up-Up contém grupos carbonilas antiparalelos dentro das colunas e colunas paralelas e a conformação Intra-Up-Down possui grupos carbonilas antiparalelos dentro das colunas e colunas antiparalelas. Foi usado Dinâmica Molecular Clássica para investigar o efeito das interações macrodipolo-macrodipolo das quatro diferentes conformações sobre a estabilidade térmica de três diferentes compostos derivados de 1,3,5-tricarboxamida-ciclo-hexano. Foi verificado que as conformações com colunas antiparalelas tendem a ser ligeiramente mais estáveis do que as conformações com orientação paralela. O efeito da orientação dos grupos carbonila dentro das colunas sob a estabilidade do material está relacionado a vários fatores, tais como cargas atômicas parciais, arranjo colunar ou natureza das cadeias laterais, e os resultados não são tão diretos como quando se compara as orientações entre colunas. Outro tópico investigado foi o comportamento do material durante a transição da fase colunar para a fase desordenada. As colunas podem se desmontar em três diferentes formas: elas podem completamente se desintegrar rapidamente, podem primeiro se desintegrar lentamente e então perder a ordem colunar ou primeiro perdem a ordem colunar e então se desmontam em um processo demorado. Tais comportamentos estão associados com as interações dentro e entre colunas.

Estudo de sistema de absorção de 1,3-butadieno em NMP.

O propósito deste trabalho foi o desenvolvimento de um procedimento simulador de processo reproduzindo a etapa de destilação extrativa de uma unidade de extração de butadieno a partir de uma corrente de hidrocarbonetos na faixa de quatro átomos de carbono, através da adição do solvente n-metil-2- pirrolidona (NMP). Os resultados obtidos foram comparados e validados com dados de processo obtidos por uma unidade industrial de extração de butadieno. O aprofundamento nos conceitos do processo de separação através de uma ferramenta em simulador de processo capaz de predizer condições de operação permitiu avaliações de aumento de capacidade. A capacidade dos elementos internos dos equipamentos envolvidos na separação pode ser avaliada e a identificação do ponto inicial de engargalamento da unidade foi possível. O procedimento proposto também permite reduzir incertezas para identificação de novos pontos de engargalamento a partir de uma nova configuração dos elementos internos identificados como ineficientes com a elevação de carga processada.

X-ray absorption study of the ferromagnetic Cu moment at the YBa_(2)Cu_(3)O_(7)/La_(2/3)Ca_(1/3)MnO_(3) interface and variation of its exchange interaction with the Mn moment

With x-ray absorption spectroscopy and polarized neutron reflectometry we studied how the magnetic proximity effect at the interface between the cuprate high-TC superconductor YBa_(2)Cu_(3)O_(7) (YBCO) and the ferromagnet La_(2/3)Ca_(1/3)MnO_(3) (LCMO) is related to the electronic and magnetic properties of the LCMO layers. In particular, we explored how the magnitude of the ferromagnetic Cu moment on the YBCO side depends on the strength of the antiferromagnetic (AF) exchange coupling with the Mn moment on the LCMO side. We found that the Cu moment remains sizable if the AF coupling with the Mn moments is strongly reduced or even entirely suppressed. The ferromagnetic order of the Cu moments thus seems to be intrinsic to the interfacial CuO_(2) planes and related to a weakly ferromagnetic intraplanar exchange interaction. The latter is discussed in terms of the partial occupation of the Cu 3d_(3z^(2)−r^(2)) orbitals, which occurs in the context of the so-called orbital reconstruction of the interfacial Cu ions.

Binap-gold (I) versus Binap-silver trifluoroacetate complexes as catalysts in 1,3-dipolar cycloadditions of axomethine ylides

The 1,3-dipolar cycloaddition between azomethine ylides and alkenes is efficiently catalysed by [{(Sa)-Binap-Au(tfa)}2] (Binap=2,2′-bis(diphenylphosphino)-1,1′-binaphthyl; tfa=trifluoroacetyl). Maleimides, 1,2-bis(phenylsulfonyl)ethylene, chalcone and nitrostyrene were suitable dipolarophiles even when using sterically hindered 1,3-dipole precursors. The results obtained in these transformations improve the analogous ones obtained in the same reactions catalysed by [Binap–Ag(tfa)]. In addition, computational studies have also been carried out to demonstrate both the high enantioselectivity exhibited by the chiral gold(I) complex, and the non-linear effect observed in this transformation.

Enantioselective 1,3-dipolar cycloadditions of azlactones and electrophilic alkenes catalyzed by dimeric BinapAuTFA complexes

Glycine-derived azlactones react with maleimides using (S)- or (R)-dimeric BinapAuTFA complexes affording the corresponding cycloadducts in good yields and high enantioselections (up to 99% ee). The intermediate carboxylic acids are treated with trimethylsilyldiazomethane and isolated as Δ¹-pyrroline methyl esters. These cycloadducts are transformed into exo-proline derivatives by reduction with NaBH3CN in acidic media. On the other hand, N-benzoylalanine-derived oxazolone reacts with tert-butyl acrylate providing the cycloadduct with the ester group at the 3-position with a trans-relative configuration with respect to the methyl ester group.

Selective hydrosilylation of 1,3-diynes catalyzed by titania-supported platinum

Titania-supported platinum (mainly as Pt(II)) has been found to effectively catalyze the hydrosilylation of 1,3-diynes at 70 °C with low catalyst loading (0.25 mol %) under solvent-free conditions. Monohydrosilylation was achieved for diaryl-substituted diynes, whereas dialkyl-substituted diynes were transformed into the corresponding dihydrosilylated products in good yields. In every case, the process was proven to be highly stereoselective, with syn addition of the silicon–hydrogen bond, and regioselective, with the silicon moiety exclusively bonded to the most internal carbon atom of the 1,3-diyne (β-E product), as confirmed by X-ray crystallography.

Kinetic study of thermal 1,3-dipolar cycloaddition of azomethine ylides using differential scanning calorimetry as monitoring window

Kinetics of 1,3-dipolar cycloaddition involving azomethine ylides, generated from thermal [1,2]-prototropy of the corresponding imino ester, employing differential scanning calorimetry (DSC), is surveyed. Glycine and phenylalanine derived imino esters have different behavior. The first one prefers reacting with itself at 75 ºC, rather than with the dipolarophile. However, the α-substituted imino ester gives the cycloadduct at higher temperatures. The thermal dynamic analysis by 1H NMR of the neat reaction mixture of the glycine derivative reveals the presence of signals corresponding to the dipole in very small proportion. The non-isothermal and isothermal DSC curves of the cycloaddition of phenylalaninate and diisobutyl fumarate are obtained from freshly prepared samples. The application of known kinetic models and mathematical multiple non-linear regressions (NLR) allow to determine and to compare Ea, lnA, reaction orders, and reaction enthalpy. Finally a rate equation for each different temperature can be established for this particular thermal cycloaddition.

Binap-silver salts as chiral-catalysts for the enantioselective 1,3-dipolar cycloaddition of azomethine ylides and alkenes

Binap-AgSbF6 catalyzed 1,3-dipolar cycloadditions between azomethine ylides and electrophilic alkenes are described and compared with analogous transformations mediated by other Binap-silver(I) salt complexes. Maleimides and 1,2-bis(phenylsulfonyl)ethylene are suitable dipolarophiles for obtaining very good enantioselectivities, even better values are generated by a multicomponent version. There are some very interesting applications of the disulfonylated cycloadducts in the total synthesis of cis-2,5-disubstituted pyrrolidines, precursors of natural products, or valuable intermediates in the synthesis of antiviral compounds.

Phosphoramidite-Cu(OTf)2 complexes as chiral catalysts for 1,3-dipolar cycloaddition of iminoesters and nitroalkenes

Chiral complexes formed by phosphoramidites such as (Sa,R,R)-9 and Cu(OTf)2 are excellent catalysts for the general 1,3-dipolar cycloaddition between azomethine ylides and nitroalkenes affording the corresponding tetrasubstituted proline esters mainly as exo-cycloadducts in high er at room temperature. The exo-cycloadducts can be obtained in enantiomerically pure form just after simple recrystallization. DFT calculations support the stereochemical results.

Multicomponent synthesis of unnatural pyrrolizidines using 1,3-dipolar cycloaddition of proline esters

The synthesis of unnatural pyrrolizidines has been studied using a multicomponent-domino process involving proline or 4-hydroxyproline esters, an aldehyde and a dipolarophile. The formation of the iminium salt promotes the 1,3-dipolar cycloaddition affording highly substituted pyrrolizidines under mild conditions and high regio- and diastereoselectivities.