1000 resultados para Derivados ácidos de fósforo


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho teve por objetivo avaliar, comparativamente, a capacidade extratora de P da soja (Glycine max), milho (Zea mays), braquiária brizantha (Brachiaria brizantha) e milheto (Pennisetum glaucum), submetidos a diferentes doses do fertilizante fosfatado natural fosforita Alvorada, em condições controladas. Utilizou-se um Argissolo Vermelho distroférrico de textura média, corrigido e adubado com N, K e micronutrientes. As espécies foram cultivadas em vasos de 18 dm³ por 50 dias em casa de vegetação, com aplicação de 0, 100, 200 e 400 kg ha-1 de P2O5. As quantidades de fosfato natural foram calculadas com base na teor total de P2O5. O milho, ao contrário da soja, respondeu positivamente ao aumento da dose de P2O5 via fosforita Alvorada. A Brachiaria brizantha cv. Marandu, apesar da menor produção de matéria seca em relação ao milheto, apresentou alta eficiência na absorção de P, mesmo com o fornecido deste nutriente por meio de fonte pouco solúvel. O milheto apresentou-se como importante espécie de cobertura do solo, graças ao alto potencial para produção de fitomassa e reciclagem de P num intervalo de tempo relativamente curto (50 dias).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Cashew-nut-shell-liquid (CNSL) is a phenolic oil that hás been due its their antioxirsion properties for use in fuels. The present work develops a method to the conversion of hidrogenated cardanol, that is the main component of the CNSL, in a compound with similar chacteristics to antioxidants used in products from petroleum. The antioxidants wasd obtained by exhaustive alkylation of the compound with tert-butyl chloride. After completing the optimization of several reaction steps, the product 2,4,6 tri-tert-butyl (pentadecylphenol) was obtained for the first tima. Characteeization and determination of physico-chemical properties were realized too, as well as wasd developed a study for check your application as an oxidative inhibitor by the molecular modeling. Estimation of process evalution was executed as well, where a rapid and practical computational methodology was utilizated in projects of the fine chemistry. The research showed satisfactory results and it could be concluded that the commercialization of this chemical products is feasible

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Para avaliar o efeito da combinação de teores de fósforo na semente com doses de fósforo aplicadas via solo sobre as características químicas e fisiológicas de semente de feijão, foram avaliadas sementes das cultivares Carioca Precoce e IAC-Carioca Tybatã, produzidas em cultivo da seca. Na produção das sementes utilizou-se o delineamento experimental em blocos casualizados em esquema fatorial 3x3, correspondente a três teores de fósforo na semente (baixo, médio e alto) e três doses de fósforo, na forma de superfosfato triplo, aplicadas no sulco de semeadura (zero, 90 e 150 kg P2O5 . ha-1), totalizando nove tratamentos para cada cultivar, com cinco repetições. Foram determinados o teor de água e as características químicas (teores de proteína, açúcares total, N, P, K, Ca, Mg, S, Cu, Fe, Mn e Zn) e fisiológicas da semente (germinação e vigor). Os dados obtidos foram submetidos à análise de variância e as médias comparadas pelo teste Tukey, a 5% de probabilidade. A qualidade fisiológica da semente não é favorecida pelos teores de fósforo na semente e no solo, embora esses ocasionem algumas alterações nos teores de nutrientes da semente.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O estudo de crescimento radicular de arroz de terras altas em função da disponibilidade de fósforo é, praticamente, inexistente. O objetivo deste trabalho foi avaliar o crescimento de diversas cultivares de arroz de terras altas em diferentes condições de disponibilidade de fósforo. O experimento foi desenvolvido em casa de vegetação, em delineamento inteiramente casualizado, em esquema fatorial 4 x 4, com quatro doses de P (0, 50, 100 e 200 mg dm-3) e quatro cultivares: Maravilha (grupo moderno), IAC 201, IAC 202 e Carajás (grupo intermediário). A cultivar Carajás possui sistema radicular que melhor se desenvolveu sob baixa disponibilidade de P. Sob baixa disponibilidade de P as cultivares IAC 201 e IAC 202 priorizaram o desenvolvimento do sistema radicular em relação a parte aérea. A cultivar Maravilha requer níveis elevados de fósforo para atingir o máximo desenvolvimento. Sob baixa disponibilidade de fósforo as cultivares de arroz diminuíram o diâmetro radicular.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study was conducted in the Sao Manuel experimental Farm, in Sao Manuel-SP, which belongs to the Faculdade de Ciencias Agronomicas (FCA) of the Universidade Estadual Paulista (UNESP), Botucatu/SP Campus, in order to evaluate the influence of organic compost doses, with and without added phosphorus to the soil, on the levels of macronutrients in plants and seeds of the lettuce cultivar Veronica. The experimental design was randomized blocks with ten treatments (0, 20, 40, 60, 80 Mg ha(-1) of organic compost, with and without 400 kg ha-1 P 2 0 5 added to the soil) and four replicates. The content of macronutrients in plants and seeds was evaluated. The data were submitted to analysis of variance and regression. The decreaning order of macronutrient content in plants was potassium > calcium > nitrogen > magnesium > phosphorus > sulfur and in seeds it was nitrogen > phosphorus > potassium > calcium > magnesium > sulfur. The nitrogen content in seeds, was about three and a half times higher than in plants, the sulfur was one and half times higher, while phosphorus content was approximately five times higher.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study had aim to evaluate influences of organic compost and phosphorus on lettuce seeds (cv. Veronica), measuring production and quality parameters of seeds in this species. Experimental design was in randomized blocks with 10 treatments, being 5 organic compost levels (0, 20, 40, 60, 80 t ha(-1) organic compost) combined with 2 phosphorus levels (0 and 400 kg ha(-1) P(2)0(5)), presenting 4 replicates. Parameters evaluated were seed mass, seed number, germination percentage, and vigor. Results obtained reveal that phosphorus application increased seed production. In the presence of phosphorus, the level of 33, 4 t ha(-1) of organic compost, and in the absence of phosphorus, the level of 49,21 t ha(-1), resulted higher seed weight per plant. The quality of seeds was not affected by fertilization with organic compost neither by phosphorus.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente experimento, inteiramente casualizado, foi desenvolvido em condições de laboratório no Departamento de Defesa Fitossanitária, FCA/UNESP - Botucatu, entre julho e setembro de 1992. Amostras de Areia Quartzosa equivalentes à 40 g de terra seca à 105 oC ± 2 com ou sem adição de 1,9 g de matéria seca de plantas de poaia-branca (Richardia brasiliensis), 0,19 g de nitrogênio (NH4)2SO4 e 0,88 g de apatita de Araxá, foram incubadas no escuro a 25 o C ± 2 , com umidade mantida a 60% da capacidade de retenção de água. Durante a incubação, determinou-se o CO2 liberado, utilizando-se o método de retenção em NAOH seguida de titulometria com HCl; a biomassa microbiana, método de fumigação-incubação; o pH e a quantidade de fósforo extraído por resina. A maior liberação de CO2 ocorreu durante os dez primeiros dias de incubação, com 77% do total de carbono liberado nos tratamentos com adição de poaia, e 37% nos tratamentos sem adição da mesma. A liberação de CO2 foi 57 vezes maior nos tratamentos com poaia em relação ao controle. A poaia também provocou aumentos na biomassa microbiana (média de 8 vezes a biomassa do tratamento controle), e a adição de nitrogênio e/ou fosfato de rocha junto à poaia antecipou os picos de formação de biomassa de 20 para 10 dias de incubação. Os níveis de fósforo disponível foram maiores no tratamento com adição de fosfato de rocha apenas. A poaia também alcalinizou o sistema, não permitindo desta forma, observar-se relação significativa entre pH e teor de fósforo disponível.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

No programa de pesquisa a respeito da adubação da cultura de trigo, utilizando isotopos (32P e 15N), o plano do ano 1971/1972 tinha, entre outros objetivos, a finalidade de determinar a porcentagem de aproveitamento do fósforo pelo trigo, em função do modo de aplicação e interação com fontes de nitrogênio. Oexperimento foi instalado em solo pertencente a ordem Ultisol e grande grupo Podzólico Vermelho-Amarelo (Pelotas-RS), contendo 9 ppm de P. Os adubos nitrogenados: sulfato de amônio, uréia e nitrato de amônio, na dose de 120 kg/ha, foram aplicados metade no plantio (ao lado e abaixo das sementes) e metade em cobertura, na fase do perfilhamento. O fósforo radioativo, na forma de superfosfato simples, foi aplicado na dose de 30 kg P2O5/ha de duas maneiras: junto com as sementes ou junto com o adubo nitrogenado aplicado no plantio. Amostras de plantas de trigo foram coletadas entre perfilhamento e espigamento e determinaram-se os pesos de matéria verde e seca, as porcentagens de P total e de P proveniente do fertilizante contidos na matéria seca e a porcentagem de utilização do fósforo aplicado (% UP). Pode-se concluir que a aplicação de nitrogênio é necessário para se obter maio res % UP, mas não há diferenças entre as fontes. Os modos de aplicação do fósforo não diferiram entre si quanto a % UP.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A adubação fosfatada promove o aumento de produtividade na cultura do alho, mas doses de fósforo (P) podem proporcionar a deficiência de zinco (Zn) na planta, sobretudo em solos com baixos teores deste micronutriente. O objetivo do trabalho foi verificar o efeito da interação entre P e Zn no solo sobre o desenvolvimento e produção de plantas de alho. Foram instalados três experimentos, cada um com um tipo de solo, em vasos com 17 kg de solo, em casa de vegetação telada. Empregou-se delineamento em blocos casualizados em esquema fatorial com 4 doses de P (0, 100, 200 e 400 mg dm-3) utilizando-se superfosfato triplo e 4 doses de Zn (0, 2,5, 5,0 e 10 mg dm-3) aplicados na forma de ZnSO4.7H2O, ambos incorporados ao solo, com três repetições. A produtividade e o desenvolvimento de plantas de alho foram influenciados, isoladamente, pelas doses de P e Zn, não havendo a interação entre esses nutrientes. Para os solos Neossolo Quartzarênico (NQ) textura arenosa, Latossolo Vermelho Distrófico (LE) textura média e Latossolo Vermelho Distroférrico (LR), textura argilosa, as melhores doses de P para a produção de alho foram de 190, 400 e 400 mg dm-3 e para o Zn de 2,2; 6,5 e 5,1 mg dm-3 respectivamente.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Com o objetivo de estudar a absorção e translocação do fósforo na cultura da mamoneira, instalou-se um ensaio em vasos com os cultivares 'Campinas' e 'Guarani' e empregou-se o fósforo radioativo (32p) como traçador. Os quatro tratamentos constaram da aplicação ao solo de 65 ppm de P contendo 32p, quando as plantas apresentavam seis, nove, doze e quatorze folhas, respectivamente e cortadas com nove, doze e quatorze folhas e as do quarto tratamento após 21 días da aplicação do fertilizante marcado. Através dos dados obtidos, pode-se concluir que, neste solo com baixo teor de fósforo, a aplicação deste elemento, na época da emissão de ínflorescências primárias, não influi no desenvolvimento das inflorescências, uma vez que se formam as expensas de fósforo previamente acumulado no pecíolo e no limbo, e que para lá se desloca a fim de participar do metabolismo de formação e desenvolvimento. em outros termos, o fósforo, quando aplicado tardiamente, não incrementará a produção dos cachos primários e, consequentemente, não pode esperar que o potencial máximo do cultivar seja atingido, pois os cachos primários representam, no mínimo, 30% da produção total da mamoneira.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The chemical nature of the hidrocarbons found in gasoline directly affects the formation of oxidation complexes known as gums. Such complexes are slightly soluble in gasoline and their formation is delayed with the use of inhibitors, known as antioxidants. In this study, a synthetic compound (βnaphtol) and a natural subproduct (hydrogenated cardanol, derived from cashewnut shell liquid CNSL) have been used in order to generate novel antioxidant substances. These compounds were submitted to chemical reactions including alkylation, nitration and reduction, with the purpose of forming the following derivatives: 6(Nethyl,Nethylamino)βnaphtol (AO1); 6(Nethyl,Ndiethylamino)βnaphtol (AO2); aminoβnaphtol (AO3); 2(Nethyl,Nethylamino)pentadecylphenol (AOC1), 2(Nethyl,Ndiethylamino)pentadecylphenol (AOC2) and aminopentadecylphenol (AOC3). The derivatives were subjected to accelerated oxidative stability assays (Potential Gum and Induction Period) and to storage assays (Washed Gum and ASTM Color) during six months, with naphtha provided by the petroleum refinery RPBC (Refinaria Presidente Bernardes de Cubatão, in Brazil). The results for the derivatives were compared to those for commercial additives [DBPC (2,6ditbutyl4methylpcresol) and PDA (N,N disecbutylpphenylenediamine)], which were also added to the naphtha produced at RPBC at the moment of sampling. From all tested antioxidants, the novel antioxidant AOC1 (derived from hydrogenated cardanol) yielded a better global performance. During the period of time in which the naphtha was stored, an examination of this material was carried out in parallel, using the mass spectrometry technique. This study allowed to monitor the formation of a triolefinic compound, as well as the observation of subsequent formation and rupture of the olefinic constituents. As an eventual result from these experimental investigations, a reaction route leading to gum formation has been suggested

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study investigated the influence of the molar ratio, the phosphorus initial concentration, the mixture gradient, mixing time, pH and the secondary nucleation on struvite s crystallization in synthetic water in batch reactors. The study was divided into two stages. The first investigated struvite s crystallization at different Mg:N:P molar ratios and at different initial concentrations of magnesium, nitrogen and phosphorus. It was also evaluated the importance of secondary nucleation on the struvite s crystallization. In the second, five parameters were tested to evaluate their influence on the struvite s crystallization, which were: Mg:N:P molar ratio, initial concentration of phosphate, mixing time, mixture gradient and pH. The best conditions for struvite s crystallization were: Mg:N:P = 1,3:1:1 molar ratio; mixture gradient = 60 rpm, pH = 10.0, mixing time = 5 minutes and high initial concentrations of the constituent ions of struvite. Furthermore, the use of struvite crystals as seed influenced positively on the struvite s crystallization

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work a method is proposed to allow the indirect orientation of images using photogrammetric control extracted through integration of data derived from Photogrammetry and Light Detection and Ranging (LiDAR) system. The photogrammetric control is obtained by using an inverse photogrammetric model, which allows the projection of image space straight lines onto the object space. This mathematical model is developed based on the intersection between the collinearity-based straight line and a DSM of region, derived from LiDAR data. The mathematical model used in the indirect orientation of the image is known as the model of equivalent t planes. This mathematical model is based on the equivalence between the vector normal to the projection plane in the image space and to the vector normal to the rotated projection plane in the object space. The goal of this work is to verify the quality, efficiency and potential of photogrammetric control straight lines obtained with proposed method applied to the indirect orientation of images. The quality of generated photogrammetric control was statistically available and the results showed that proposed method is promising and it has potential for the indirect orientation of images.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aims to determine the amount of nutrients and toxic elements in aquatic macrophytes of species Eichhornia crassipes present in River Apodi/Mossoró - RN and check some of the possibilities of using the biomass produced, based on the influence of space - temporal and physiological absorption of nutrients by plants. For this, was determined: Leaf area, Leaf wet mass, Leaf dry mass, Real humidity, Apparent humidity, Ash, Total nitrogen, Crude protein, Calcium, Magnesium, Potassium, Total phosphorus, Sodium, Iron, Copper, Manganese, Zinc, Nickel, Cobalt, Aluminum, Cadmium, Lead and Total chromium at different times, 2 sampling points and 2 parts of plants (leaves and roots). The results show that the levels of nutrients, protein and toxic elements present in plant tissue of Eichhornia crassipes are influenced by spatial, temporal and physiological variability. In general, because the maximum values in the dry matter for total nitrogen (4.4088 g/100g), crude protein (27.5549 g/100g), total phosphorus (0.642 g/100 g), calcium (1.444 g/100g), magnesium (0.732 g/100 g), potassium (7.51 g/100 g), copper (4.4279 mg/100g), manganese (322.668 mg/100g), sodium (1.39 g/100g), iron (194.169 mg/100g) and zinc (3.5836 mg/100g), there was the possibility of using biomass of Eichhornia crassipes for various purposes such as in food animal, products production for human consumption, organic fertilizers, fabrication of brick low cost, and crafts. For all these applications requires a control of the levels of substances in plant tissue. Based on the levels of nutrients and crude protein, the younger plants (0 Month) would be best to have their biomass used. Moreover, one factor that contributes to the use of larger plants (6 Months), the levels of toxic elements which have significantly small or below the detection limit. Therefore, further studies quantifying the biomass produced/m2 at 0 and 6 months are needed for a more correct choice for the best time of harvest

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Produced water has lately aroused interest due to their high degree of salinity, suspended oil particles, chemicals added in various manufacturing processes, heavy metals and radioactivity sometimes. Along with oil and due to its high volume production, water production is one of the pollutants of most concern in the process of oil extraction. PAHs due to their ubiquity and their characteristics carcinogenic or mutagenic and teratogenic even have attracted the attention of every scientific society. Formed from the incomplete combustion of organic matter may be natural or anthropogenic. Some materials have been researched with the goal of cleaning up environmental matrices that may be contaminated by hydrocarbons. Among these materials researched various clays have been employed, of which highlights the vermiculite. The family of phyllosilicates, vermiculite for its potential and its high hydrophobic surface area has been a tool widely used in the decontamination of water in processes of oil spills. However, when it loses its capacity expanded hydrophobic having the necessity of using a hidrofobizante to make it organophilic. Among the numerous hidrofobizantes researched and used the linseed oil was the pioneer. In this study sought to evaluate the capacity of removal of PAHs using the vermiculite hydrofobized with linseed oil and wax also, for it was made use of the 24 full factorial design as the main tool for the experiments. We also evaluated the clay grain size (-20 +48 and -48 +80 #), the percentage of hidrofobizante applied (5 and 10%) and salinity of the water produced synthesized in our laboratory (35,000 and 55,000 ppm). The molecular fluorescence spectroscopy due to its sensitivity and speed was used to verify the adsorption capacity of clay, as well as gas chromatography served as an auxiliary technique to identify and quantify the PAHs in solution. In order to characterize the vermiculite was made use of X-ray fluorescence and X-ray diffraction. The infrared and thermogravimetry were essential to note hydrophobization and the amount of coating of clay. According to the fluorescence analysis showed that the test 12 was the best result in about 98% adsorption of fluorescent compounds, however the high salinity, the smallest particle size, the highest percentage of hidrofobizante and the use of linseed oil showed greater efficiency in the removal capacity of these hydrocarbons, in accordance with the trend followed by the analysis of the major factors of the factorial design. To verify the adsorption capacity of clay using a fixed volume of water produced synthetically, used as the test base 12, at their respective levels and factors. Thus, it was observed that after adding about 1 ½ liters of water solution produced synthetically, about 300 times its volume in mass, the vermiculite was able to adsorb 80% of fluorescent species present in solution