960 resultados para Density Polyethylene
Resumo:
Three different stocking rates in a semi-intensive pilot shrimp project was adopted in duplicates of three treatments designated as T1, T2 and T3 having initial per meter square stocking density of shrimp of 40, 44 and 51 respectively of 0.025g size post larva. The study was conducted for 84 days. Commercial pelleted diets designated as starter - 1, 2, 3 and grower were fed at a satiation level during the study period with a feeding frequency of 4 to 5 times per day. Feed rationing was based on the survivability, body weight and tray checking. 5-25% of the pond water was exchanged daily. Sampling was done for growth after every 2nd week. Monthly sampling was done for mortality in the ponds. Mean weight gain of the shrimp in treatments T1, T2 and T3 were 16.96 ± 1.14, 16.04 ± 1.38 and 14.08 ± 1.17g respectively and T1 with a low stocking density showed a significantly best growth among the treatments. Total mortality in treatments T1, T2 and T3 were as 30.00, 39.77 and 31.37% respectively. Significantly higher feed conversion ratio (FCR) of 1.87 was obtained with shrimp in treatment T3 followed by shrimp in T1 and T2 with FCR values of 1.70 and 1.41 respectively. A positive correlation of growth and salinity was observed during the study. Total production per unit area was the highest in the treatment T3 (4928 kg/ha) and followed by T1 (4747 kg/ha) and T2 (4251 kg/ha). The result show significantly negative correlation between individual growth and density.
Resumo:
An experimental culture practice of P. monodon on extension approach was conducted in two brackish water earthen ponds of Demonstration Farm and Training Center (DFTC), Kaliganj, Satkhira. The experiment was aimed to provide farmers with appropriate technology that can immediately improve pond yield with keeping the environment in friendly condition. For optimization of stocking density of a cost effective environmental friendly improved extensive shrimp farming, the ponds were stocked with coastal river post larvae of P. monodon at the stocking rates of 2 pls/m² and 2.5 pls/m² without supplementary feeding. To control experimental error another five farmer's gher were used as replicates of each demo-pond. Considering the farmers buying ability, cost of inputs and other facilities kept minimal. The impact of stocking density was evaluated on the basis of growth, survival rate, production and economic return. Better production (average 299.01 kg/ha) with same survival rate (39.33%) were found with a stocking density of 2.5 pls/m² without causing any deterioration in the culture environment.
Resumo:
A three month long experiment was conducted to observe the effect of stocking density on the growth of Pangasius sutchi in net cages. The size of each cage was 1m³.The three stocking densities used were 40, 50 and 60 fishes/m³ and designated as treatment T1, T2 and T3 respectively. Each treatment had three replicates. All the fishes were of same age group having mean length and weight of 7.13 ± 1.37 cm and 2.46 ± 0.12 g respectively. The fish in all the net cages were fed a diet containing 34% protein. The result of the study showed that fish in the treatment T1 stocked at the rate of 40 fish/m³ resulted the best individual weight gain followed by T2 and T3 respectively. The specific growth rate (SGR) ranged between 3.51 and 3.09, the food conversion ratio (FCR) values ranged between 1.73 and 2.04 with treatment T1 resulting the lowest FCR. The protein efficiency ratios (PER) values were 1.69, 1.16 and 1.43 for treatment T1, T2 and T3 respectively. There was no significant (P>0.05) variation among the survival rates of fish which ranged between 92 and 95%. The net productions in different treatments were 2189, 2343, and 2283g for treatment T1, T2 and T3 respectively. The result of the present study indicated that the best individual growth of P. sutchi was obtained at a density of 40 fish/m³ but the highest total production was obtained at a stocking density of 50 fish/m³ in net cages.
Resumo:
This paper investigates the variation of the integrated density of states with conduction activation energy in hydrogenated amorphous silicon thin film transistors. Results are given for two different gate insulator layers, PECVD silicon oxide and thermally grown silicon dioxide. The different gate insulators produce transistors with very different initial transfer characteristics, but the variation of integrated density of states with conduction activation energy is shown to be similar.
Resumo:
High quality large grain high Tc superconducting ceramics offer enormous potential as 'permanent' magnets and in magnetic screening applications at 77K. This requires sample dimensions -cm with uniform high critical current densities of the order 105 A/cm2 in applied magnetic fields of IT. We report a study of the magnetic characterisation of a typical large YBa2Cu3O7-δ grain, prepared by seeded peritectic solidification, and correlate the magnetically determined critical current density, Jc, with microstuctural features from different regions of the bulk sample. From this data we extract the temperature, field and positional dependence of the critical current density of the samples and the irreversibility line. We find that whilst the bulk sample exhibits a good Jc of order 104 A/cm2 (77K, 1T), the local Jc is strongly correlated with the sample microstructure towards the edge of the sample and more severely at the centre of the sample by the presence of SmBa2Cu3O7-δ seed crystal. © 1997 IEEE.
Resumo:
A variety of hydrogenated and non-hydrogenated amorphous carbon thin films have been characterized by means of grazing-incidence X-ray reflectivity (XRR) to give information about their density, thickness, surface roughness and layering. We used XRR to validate the density of ta-C, ta-C:H and a-C:H films derived from the valence plasmon in electron energy loss spectroscopy measurements, up to 3.26 and 2.39 g/cm3 for ta-C and ta-C:H, respectively. By comparing XRR and electron energy loss spectroscopy (EELS) data, we have been able for the first time to fit a common electron effective mass of m*/me = 0.87 for all amorphous carbons and diamond, validating the `quasi-free' electron approach to density from valence plasmon energy. While hydrogenated films are found to be substantially uniform in density across the film, ta-C films grown by the filtered cathodic vacuum arc (FCVA) show a multilayer structure. However, ta-C films grown with an S-bend filter show a high uniformity and only a slight dependence on the substrate bias of both sp3 and layering.
Resumo:
A model of graphite which is easy to comprehend and simple to implement for the simulation of scanning tunneling microscopy (STM) images is described. This model simulates the atomic density of graphite layers, which in turn correlates with the local density of states. The mechanism and construction of such a model is explained with all the necessary details which have not been explicitly reported before. This model is applied to the investigation of rippling fringes which have been experimentally observed on a superlattice, and it is found that the rippling fringes are not related to the superlattice itself. A superlattice with abnormal topmost layers interaction is simulated, and the result affirms the validity of the moiré rotation pattern assumption. The "odd-even" transition along the atomic rows of a superlattice is simulated, and the simulation result shows that when there is more than one rotated layer at the top, the "odd-even" transition will not be manifest. ©2005 The Japan Society of Applied Physics.
Resumo:
The penaeid prawns of Sri Lanka from estuaries and sea are an important commercial fishery resource. This resource has been exploited over the last century or more by local fishermen using indigenous fishing gear from locally sail-driven or oar-driven fishing crafts. In more recent times, the Fisheries Research Division of the Department of Fisheries undertook surveys of the seas and lagoons of Sri Lanka with a view to ascertain whether any unexploited resources of prawns existed. These publications deal with the species composition, biology, distribution and abundance in the lagoons and inshore waters of Sri Lanka.
Resumo:
The black muntjac (Muntiacus crinifrons, 2n = 8 female/9 male) is a critically endangered mammalian species that is confined to a narrow region of southeastern China. Male black muntjacs have an astonishing X1X2Y1Y2Y3 sex chromosome system, unparalleled i
Resumo:
Background: CpG islands, which are clusters of CpG dinucleotides in GC-rich regions, are considered gene markers and represent an important feature of mammalian genomes. Previous studies of CpG islands have largely been on specific loci or within one geno
Resumo:
The optimisation of stocking density of Thai silver
barb (Barbodes gonionotus) in the polyculture with Labeo rohita, Catla cat/a and Cyprinus cmpio was investigated in seasonal
ponds. Three different stocking densities of Thai silver barb i.e., 5,000, 6,000 and 7,000
fingerlings ha-1 were tested with stocking density of carps fixed at the rate of 10,000
fingerlings ha-1 Duckweed was applied to all ponds supplemented with rice bran and oil
cake. There were no significant variations on either water quality parameters or
abundance of planktonic organisms due to the different stocking densities of silver barb.
A significantly higher fish production (p
Resumo:
Influence of stocking density on the production of freshwater catfish Pangasius pangasius with formulated feed in ponds was studied. The fish fry were collected from the Meghna river near Chandpur which is a natural breeding ground of this fish. Three stocking densities chosen during this experiment were 5000, 8000 and 11000 fry/ha with an initial weight of 42.57 ±2.51 g. The formulated feed was prepared in the laboratory which contained 45% fish meal, 30% mustard oil cake, 15% wheat bran and 10% rice bran to supply 40.48% protein in feed. The growth of P. pangasius in terms of net weight gain was 409.49, 266.49 and 236.37 g at the 5000/ha, 8000/ha and 11000/ha stocking densities respectively, which was statistically significant (p<0.05). High food conversion ratio (FCR) was also observed during this research study which ranged between 7.06 to 7.72. A production of 2.6 tons/ha at the stocking density of 11000/ha; 2.13 tons/ha at the stocking density of 8000/ha and 2.04 tons/ha at the stocking density of 5000/ha was obtained, while the growth of individual fish at the end of experiment was in opposite order. The result of this experiment indicates that stocking density has significant influence on the culture potential of freshwater catfish P.pangasius.
Resumo:
Effects of three stocking densities, viz., 35, 50 and 65/decimal (1 decimal = 40.48 m2) of juvenile freshwater prawn (Macrobrachium rosenbergii) on prawn and fish production were tested in a polycuture system with silver carp (Hypophthalmichthys molitrix), catla (Catla catla), Grass carp (Ctenophmyngodon idella) and silver barb (Barbodes gonionotus). The fish stocking density was 19/decimal with the species combination of silver carp-10, catlac-6, grass carp-1 and silver barb-2. In a 8-month culture period, the prawn yield 423 ± 144 kg/ha was significantly lower (P< 0.5) with the prawn stocking density of 35/decimal than that of 548 ± 178 kg/ha and 662 ± 243 kg/ha with 50 and 65/decimal respectively. The fish production (1844-1891 kg/ha) did not differ significantly (p <0.05) among the three treatments indicating that prawn stocking densities had no influence on fish yield. The lower mean harvest weight (62 g) and survival rate (67 g) and higher yield (2.67 kg/decimal) with the highest stocking rate of prawn reveals that as density was increased, prawn survival and individual weight at harvest decreased but total yield increased.
Resumo:
Growth, survival and food conversion ratio (FCR) of Cyprinus carpio in cages at different stocking density were studied in Kaptai lake. Fingerlings of common carp (12.47 ± 4.29 g) were stocked at 25/m2 , 50/m2 and 75/m2 each with replication in six floating net cages each of Sm x Sm x 4m and reared for 240 days. The growth rate was inversely related to the stocking density with the mean weights of 325.5 ± 11.74 g, 268.99± 8.44 g and 167.0 ± 11.66 g at low, medium and high densities, respectively. At harvest, standing crop biomass averaged 7 .82, 12.83 and 11.58 kg with the survival of 98.9%, 97.6% and 94.4% and food conversion ratios of 4.51, 3.82 and 4.21 for the above three densities, respectively. Weight gain and production at density 25 fish/m 2 were significantly different (p< 0.01) from other two densities. Water quality was not affected in the cages having different stocking densities.
Resumo:
The merits and demerits of cotton, polyethylene and combination of the two materials ascertained on the basis of cost, wear and tear, maintenance, total catch and qualitative analysis of the catch are discussed by making comparative fishing experiments with the three trawl gears made of these materials. The study can be concluded with a suggestion for switching over to polyethylene twisted monofilaments for better, in case of bottom trawls without in any way adversely affecting the catch of shrimps and at the same time for enhanced fish catch. Even though the combination net is found to be equal in efficiency as the polyethylene net this idea cannot be conveniently adopted from the point of view of economy.